Commit Graph

412 Commits

Author SHA1 Message Date
jiangguangming
9c6afee12f flash mmap: abstract R/W MMU table instead of reg access 2022-05-20 16:46:27 +08:00
morris
8138f8bb02 driver: remove deprecated code
that declared as deprecated in the previous release
2022-05-19 11:31:53 +08:00
Jing Li
ac0d16cdc8 Merge branch 'bugfix/fix_cannot_lslp_again_after_ulp_wakeup' into 'master'
sleep: fix cannot lightsleep again after a wakeup from ULP

Closes IDFGH-4396

See merge request espressif/esp-idf!17970
2022-05-13 22:25:23 +08:00
jingli
dd414b9305 esp_hw_‎support/sleep: ‎fix cannot lightsleep again after a wakeup from ULP
Since ulp wakeup signal are connected to ulp int raw(except esp32), we
need to clear ulp int raw before sleep when ulp wakeup enabled. Otherwise,
if the ulp int raw is already set, chip will not sleep properly.

Closes https://github.com/espressif/esp-idf/issues/6229
2022-05-12 17:57:08 +08:00
Marius Vikhammer
c8617fe965 docs: fix all doxygen warnings
Doxygen warnings would previously not result in a failed pipeline.
Fixed this as well as all current warnings.
2022-05-12 14:50:03 +08:00
morris
722fde218d uart: add default source clock for all targets 2022-05-09 11:26:30 +08:00
Armando (Dou Yiwen)
03aeac1dde Merge branch 'refactor/adc_hal_common_layer' into 'master'
adc: create common adc hal layer

See merge request espressif/esp-idf!17577
2022-05-08 15:45:56 +08:00
Armando
49747bb486 adc: create common adc hal layer 2022-05-07 19:20:44 +08:00
morris
2fb43820c2 driver_ng: implement new rmt driver
The legacy driver can't handle the breaking change between esp chips

very well.

And it's not elegant to extend new feature like DMA, ETM.

The new driver can return a opaque handle for each RMT channel.

An obvious transaction concept was also introduced.

TX and RX functionalities are splited out.
2022-05-07 10:34:50 +00:00
Cao Sen Miao
4418a855ba spi_flash: refactor the spi_flash clock configuration, and add support for esp32c2 2022-04-26 15:22:37 +08:00
laokaiyao
b99ced08a2 i2s: fix only right case
Closes: https://github.com/espressif/esp-idf/issues/8538
2022-04-23 07:38:45 +00:00
Darian Leung
09dc46552b twai: Fix twai_ll_parse_frame_buffer() typo
Closes https://github.com/espressif/esp-idf/issues/8743
2022-04-22 15:25:39 +08:00
morris
373d9b3dbc Merge branch 'feature/default_clk_for_gptimer' into 'master'
clk_tree: added default clock source for peripherals (GPTimer, RMT, LCD, TempSensor)

Closes IDF-4894

See merge request espressif/esp-idf!17759
2022-04-19 18:02:40 +08:00
songruojing
534346f4bb ledc: Provide support for esp32c2 and esp32h2
LEDC examples, unit test, and programming guide are all updated.
2022-04-14 08:15:14 +00:00
morris
f32a89826c clk_tree: added default clock source for peripheral 2022-04-14 15:44:56 +08:00
morris
cc71e645be Merge branch 'feature/ksz8863rll_support' into 'master'
ESP IDF infrastructure preparation for ksz8863rll support

See merge request espressif/esp-idf!17203
2022-04-14 10:51:27 +08:00
songruo
60bb5c913d clk_tree: prework of introducing clk subsystem control
1. Clean up clk usage in IDF, replace rtc_clk_xtal/apb_freq_get with
   upper level API esp_clk_xtal/apb_freq
2. Fix small errors and wrong comments related to clock
3. Add clk_tree_defs.h to provide an unified clock id for each chip
   Modify the NGed drivers to adopt new clock ids
2022-04-11 12:09:06 +08:00
Ondrej Kosta
4051b80b4d esp_netif: remove dependency of L2 TAP Interface from netif_lwip
esp_eth: extended infrastructure to optionally provide more advanced access to MAC/PHY layers
2022-04-08 16:40:29 +02:00
Armando
a8a47a61f5 spi_flash: move buffer check from hal layer to driver layer
Prior to this change, `spi_flash_hal_supports_direct_write` and
`spi_flash_hal_supports_direct_read` will check the buffer pointer
place, which should be done in driver layer, instead of HAL layer.
2022-04-08 11:46:10 +08:00
Armando
c4bcf1117c esp_hw_support: move soc_memory_types.h helper functions into esp_hw_support 2022-04-08 11:46:10 +08:00
laokaiyao
f17edba20b i2s: extract std/pdm/tdm modes
Type structures of these modes are defined. Driver and HAL layer are modified to fit these concepts.
2022-03-22 10:14:45 +08:00
Armando
386363cafd adc: unify adc_ll_num_t and adc_unit_t 2022-03-18 11:36:50 +08:00
Armando (Dou Yiwen)
6ed3ffbbf1 Merge branch 'refactor/remove_redundant_rom_cache_dependency' into 'master'
cache: remove redundant rom cache dependency in bootloader

Closes IDF-4523

See merge request espressif/esp-idf!17077
2022-03-12 10:11:39 +08:00
Armando
c1cbd7bbf6 cache/mmu: implememnt cache and mmu hal APIs in bootloader 2022-03-11 22:43:11 +08:00
morris
9f55712c03 rmt: document and improve LL driver 2022-03-09 10:58:12 +08:00
Sachin Parekh
bc1d35a14e esp32c2/hal: Added ECC HAL layer 2022-03-08 14:05:23 +00:00
Simon
4bf4a020a6 Merge branch 'refactor/abstract_temperature_sensor' into 'master'
temperature_sensor: Refactor temperature sensor to new APIs (follow rule of driverNG) and support esp32s3

Closes IDF-3665, IDF-3367, and IDF-1793

See merge request espressif/esp-idf!16787
2022-03-07 20:17:39 +08:00
morris
a0283234cd Merge branch 'feature/support_esp32h2_gpio' into 'master'
esp32h2: support GPIO peripheral, IO_MUX, GPIO matrix

Closes IDF-4232 and IDF-3439

See merge request espressif/esp-idf!16609
2022-03-04 18:22:28 +08:00
Cao Sen Miao
b248046bcb Temperature_sensor: Create new temperature sensor API 2022-03-04 18:13:35 +08:00
songruojing
c8c137f2b7 esp32h2: support GPIO peripheral, IO_MUX, GPIO matrix.
Generic GPIO example is supported as well.
2022-03-04 11:25:05 +08:00
morris
ec8defaa96 pulse_cnt: new driver for PCNT peripheral 2022-03-03 22:38:32 +08:00
Song Ruo Jing
b665dcbe68 Merge branch 'feature/esp32c2h2_support_uart' into 'master'
UART: Provide support for esp32c2 and esp32h2

Closes IDF-3823, IDF-4154, and IDF-4221

See merge request espressif/esp-idf!16832
2022-03-03 11:45:10 +08:00
laokaiyao
b336a838b6 i2s: fix bug of switching mono/stereo mode by 'i2s_set_clk' on c3/s3 2022-03-02 03:34:25 +00:00
songruojing
24a60c12c6 uart: Provide support for esp32c2 and esp32h2
UART examples, unit test, and programming guide are all updated.
2022-03-02 11:29:13 +08:00
Kevin (Lao Kaiyao)
cc1d89ebba Merge branch 'feature/i2c_support_on_esp8684_esp32h2' into 'master'
i2c: support i2c on esp32c2 and esp32h2

Closes IDF-3918

See merge request espressif/esp-idf!16444
2022-02-28 13:59:02 +08:00
Konstantin Kondrashov
44e5ac2c59 Merge branch 'feature/efuse_hal' into 'master'
hal: Adds efuse hal layer

See merge request espressif/esp-idf!16354
2022-02-28 13:38:43 +08:00
KonstantinKondrashov
9605f3eb1a soc: Adds efuse hal
Replaced eFuse ROM funcs with hal layer
2022-02-24 22:20:09 +08:00
laokaiyao
7da023ceae i2c: support esp32c2 2022-02-23 15:19:37 +08:00
morris
116197040f i2s: update copyright 2022-02-21 21:28:48 +08:00
0xFEEDC0DE64
c86fba7919 Fix compiling when included from C++ 2022-02-18 15:37:07 +01:00
Ondrej Kosta
7512bdecfe Merge branch 'feature/emac_start_stop_test' into 'master'
test_emac: extended Ethernet start/stop stress test

Closes IDF-4540

See merge request espressif/esp-idf!16755
2022-02-15 13:23:01 +00:00
David Cermak
8da2e4088c esp_eth: Update esp32's EMAC API to decouple driver and vendor config 2022-02-14 16:17:29 +00:00
David Cermak
1dc60730ee esp_eth: ESP32 EMAC to use common DMA busrt size for both Tx and Rx 2022-02-14 16:17:29 +00:00
David Cermak
2553fb5845 esp_eth: Make EMAC DMA burst size configurable
Merges https://github.com/espressif/esp-idf/pull/7874
Closes  https://github.com/espressif/esp-idf/issues/7380
2022-02-14 16:17:29 +00:00
Ondrej Kosta
e97fd4b076 esp_eth: EMAC start/stop optimization 2022-02-14 08:21:43 +01:00
morris
2ab7d92785 lcd: improve LL driver according to TRM 2022-01-24 18:58:37 +08:00
laokaiyao
cf049e15ed esp8684: rename target to esp32c2 2022-01-19 11:08:57 +08:00
Ivan Grokhotkov
876f4d6a1c vfs: add support for semihosting on ESP32-C3 2022-01-14 17:29:03 +01:00
Armando
6a74cb695d spi: support spi on 8684 2022-01-12 11:30:29 +08:00
morris
869bed1bb5 soc: don't expose unstable soc header files in public api 2022-01-06 23:10:22 +08:00
morris
8cdcb4e291 rmt: move RMT item definition from soc to driver 2022-01-06 21:43:12 +08:00
Darian Leung
1aad12468a usb: Hub Driver Update and Refactor
Hub Driver is refactored as follows:

This commit update and refactors the Hub Driver as follows:

- Refactored enumeration state machine and stage functions
    - Enumeration stage is now incremented
    - Combined transfer stages of enumeration into common functions
- Comments updated
- Fixed usbh_hal_disable_debounce_lock() that would cause root_port_handle_events()
    to fail the HCD_PORT_CMD_RESET call because the previous port connection interrupt
    was not cleared.

The following features were added to the Hub Driver

- Enumeration config descriptor is now fetched in two separate stages
    - Header is fetched first to determine the wTotalLength of the descriptor
    - Fetching the full descriptor will request exactly wTotalLength bytes
    - This works around some non-compliant devices that will babble/return zero
        when requesting a length > wTotalLength
    - Closes https://github.com/espressif/esp-idf/issues/7799
- Enumeration now stores string descriptors
    - The Manufacturer, Product, and Serial Number string descriptors are
        now read and stored during enumeration
    - String descriptors are now part of usb_device_info_t
- Added unit test to test enumeration
2022-01-06 15:11:13 +08:00
Darian Leung
854127a57c usb: USB Host stack uses USB PHY driver
This commit updates the USB Host stack to use the USB PHY driver. The
USB PHY and the OTG Controller should now both be setup/deleted using
usb_new_phy() and usb_del_phy() respectively.

- The hcd_install() now expects the USB PHY and OTG Contorller to be
    already setup before it is called
- usb_host_install() now has an option to skip calling usb_del_phy() if
    the user wants to setup their own USB PHY (e.g., in the case of using
    and external PHY).
- CDC-ACM and MSC examples/test updated to use internal PHY

Closes https://github.com/espressif/esp-idf/issues/8061
2022-01-06 15:09:39 +08:00
Ondrej Kosta
fa9cc49b9e Merge branch 'bugfix/esp_eth_start_tx_buff' into 'master'
Fixed ESP32 EMAC driver `insufficient TX buffer size`

Closes WIFI-4194

See merge request espressif/esp-idf!16457
2022-01-05 09:40:12 +00:00
songruojing
e0bc3a923c esp8684: support GPIO peripheral, IO_MUX, GPIO matrix.
Generic GPIO example and GPIO unit test on esp8684 are both supported as well.
2021-12-29 22:01:45 +08:00
laokaiyao
4f28b33bbc apll: add lock for apll 2021-12-29 10:13:13 +08:00
Ondrej Kosta
1150a11c56 Fixed ESP32 EMAC driver insufficient TX buffer size which could followed esp_eth_stop and esp_eth_start sequence 2021-12-23 10:48:38 +01:00
morris
2c810f8451 timer: save alarm value in driver layer 2021-12-23 11:39:32 +08:00
Martin Vychodil
dd938eb952 System/Security: Memprot API unified (ESP32C3)
Unified Memory protection API for all PMS-aware chips (ESP32C3)

Closes JIRA IDF-3849
2021-12-21 01:50:36 +01:00
Armando
4dc0d6b2fe adc: support adc dma driver on all chips 2021-12-16 00:19:15 +00:00
morris
89e37837d0 lcd: rgb pclk idle default to low 2021-11-30 13:44:06 +08:00
Ondrej Kosta
3a7a67f174 netif: added ESP-NETIF L2 TAP interface 2021-11-23 11:17:22 +01:00
Omar Chebib
aa2ca7dd94 LEDC: improved support for ESP32-C3 and refactored divisor calculation
As ESP32C3 does not have support for REF_TICK source clock, it is now not
possible to select it anymore.
Auto cfg clock has been improved for all boards.
2021-11-11 12:21:15 +08:00
morris
83d16aa00c gdma: support IRAM interrupt 2021-11-08 16:14:51 +08:00
Cao Sen Miao
09487761cf ESP8684: add freertos, hal, esp_system support 2021-11-06 17:33:44 +08:00
Alexey Gerenkov
bb9cd84cdc debug_stubs: Refactor and add support for RISCV 2021-11-04 01:33:24 +03:00
Darian Leung
0c758c8557 usb: Fix how the HCD handles sudden disconnection
This commit fixes how the USB Host HCD handles sudden disconnections.

Bugs:
- HW channels remain active when the port suddenly disconnects, and
previously the channel would be disabled by setting the disabled bit,
then waiting for a disabled interrupt. However, ISOC channels do not
generate the disabled interrupt when the port is invalid, thus leading
to tasks getting indefinitely blocked in hcd_pipe_command().

Fix:
On a sudden disconnection, forcibly treat all channels as halted even
if their HCCHAR.ChEna bit is still set. We do a soft reset after a port
error anyways, so the channels will eventually be reset.

Closes https://github.com/espressif/esp-idf/issues/7505
2021-11-02 14:30:58 +08:00
Darian Leung
0159c37cf2 usb: Fix LL 8/16 bit register field access
This commit addes the 8/16 bit register field access workarounds to
the DWC_OTG peripheral. This workaround was applied to all other
peripherals in commit 874a720286.
2021-11-02 14:30:58 +08:00
Jakob Hasse
7efb01846f [cxx]: simple spi master class
* spi cxx unit test (CATCH-based, on host)
* added portmacro.h to driver mocking
* added simple testing app to write/read SPI,
  using an MPU9250
2021-10-25 14:56:59 +08:00
morris
e2275b1f63 gptimer: clean up hal and ll for driver-ng 2021-10-20 18:40:08 +08:00
Kevin (Lao Kaiyao)
a9faafee3c Merge branch 'feature/touch_sensor_driver_support_for_esp32s3' into 'master'
driver(touch): support touch sensor for esp32s3 platform

Closes IDF-1784 and IDF-3302

See merge request espressif/esp-idf!14102
2021-10-12 05:50:58 +00:00
morris
7283e349b9 Merge branch 'refactor/rgb_lcd_callback_add_event_data' into 'master'
lcd: modify callback prototype && build API docs

See merge request espressif/esp-idf!15354
2021-10-09 06:26:44 +00:00
laokaiyao
f4705f8eb4 touch sensor: update copyright notice 2021-10-08 11:45:57 +08:00
fuzhibo
057b9d61b5 driver(touch): support touch sensor for esp32s3 platform 2021-10-08 10:39:46 +08:00
morris
e09e39c94f lcd: unify callback prototype 2021-10-02 14:23:31 +08:00
laokaiyao
7264c0e59a i2s_rec_example: add support for esp32s3 2021-10-01 16:05:04 +01:00
Alex Lisitsyn
f40ae9cae9 Merge branch 'bugfix/fix_esp_restart_does_not_reset_timer_groups_periph' into 'master'
driver: fix esp_restart() does not reset timer group peripheral

Closes IDFGH-4652

See merge request espressif/esp-idf!12188
2021-09-16 11:45:42 +00:00
Alex Lisitsyn
c5d0d89508 driver: fix timer driver initialization sequence to not trigger interrupt immediately
add timer_hal_reset_periph()
fix timer_init() to reset timer counter during init
2021-09-16 19:45:33 +08:00
Armando (Dou Yiwen)
13b63cd9d2 Merge branch 'feature/support_adc_calibration_s3' into 'master'
adc: support adc calibration on s3

Closes IDF-1950, IDF-3730, and IDF-3036

See merge request espressif/esp-idf!15031
2021-09-14 08:51:03 +00:00
Armando
c45c6f52f1 adc: support adc efuse-based calibration on esp32s3 2021-09-14 11:42:50 +08:00
songruojing
1fcd639224 usb: Add usb_phy driver to support operations on USB PHY 2021-09-13 12:39:56 +08:00
morris
25f723765e Merge branch 'feature/lcd_driver_follow_up' into 'master'
lcd: add PM lock

Closes IDF-3631, IDF-3704, and IDF-3317

See merge request espressif/esp-idf!14880
2021-09-10 03:14:50 +00:00
Wang Meng Yang
a885c42cda Merge branch 'example/controller_hci_uart_for_esp32s3' into 'master'
examples: added support of ESP32-S3 chip in controller_hci_uart example

Closes BT-1906

See merge request espressif/esp-idf!14935
2021-09-08 06:02:18 +00:00
Cao Sen Miao
e85e9dc824 Merge branch 'feature/esp_flash_octal_api_support_xmic' into 'master'
esp_flash: Add new octal flash chip support in new chip driver (for MXIC)

Closes IDF-2859

See merge request espressif/esp-idf!14185
2021-09-08 03:59:34 +00:00
morris
02e470bc50 lcd: add pm lock 2021-09-08 11:34:46 +08:00
Cao Sen Miao
6c0aebe279 esp_flash: add opi flash support in esp_flash chip driver, for MXIC 2021-09-07 14:44:40 +08:00
Jiang Jiang Jian
316988bd2d Merge branch 'feature/support_esp32s3_cpu_tagmem_retention' into 'master'
support esp32s3 cpu + tagmem retention

See merge request espressif/esp-idf!14579
2021-09-06 03:47:44 +00:00
Kevin (Lao Kaiyao)
2991eea97d Merge branch 'refactor/i2s_driver' into 'master'
driver/i2s: bugfix and refactor for i2s

Closes IDF-3656 and IDF-3738

See merge request espressif/esp-idf!14704
2021-09-06 02:07:40 +00:00
laokaiyao
c5afd7ce34 i2s: fix write failure on ESP32 in 32bit slave mode 2021-09-03 17:36:44 +08:00
laokaiyao
0ff3dd9778 i2s: fix mono support issue 2021-09-02 14:33:36 +08:00
laokaiyao
b26da6f115 driver/i2s: refactor for i2s driver layer 2021-09-02 14:33:36 +08:00
Sachin Billore
f80d6f8c21 Digital Signature support for S3
Closes IDF-1791
2021-09-02 11:59:24 +05:30
Marius Vikhammer
bdf3a8ff29 Merge branch 'feature/xtwdt' into 'master'
WDT: Add support for XTAL32K Watchdog timer

Closes IDF-2575

See merge request espressif/esp-idf!15000
2021-09-02 02:44:47 +00:00
Marius Vikhammer
4869b3cd4a WDT: Add support for XTAL32K Watchdog timer 2021-09-02 09:09:00 +08:00
Darian
8af7292496 Merge branch 'feature/new_usb_host_driver' into 'master'
(5) USB: Add public USB Host Driver

Closes IDF-3121, IDF-3509, and IDF-3557

See merge request espressif/esp-idf!13145
2021-08-30 09:28:43 +00:00
Li Shuai
ccf1a9a1fc light sleep: add i/d-cache tagmem retention support for esp32s3 2021-08-27 11:11:09 +08:00
Li Shuai
03746de96f light sleep: add cpu power down support for esp32s3 2021-08-27 11:11:06 +08:00
Martin Vychodil
58aed7df98 ESP32S2: No assert()/abort() in Memprot API, use esp_err_t instead
JIRA IDF-3634
2021-08-26 09:20:00 +02:00
wangmengyang
c053ef0541 examples: added support of ESP32-S3 chip in controller_hci_uart example 2021-08-26 14:24:32 +08:00
Darian Leung
accbaee57c Add USB Host Library
This commit adds the preliminary version of the USB Host Library. This commit contains:

- USBH (USB Host Driver)
- Hub Driver that only supports a single device and device enumeration
- USB Host Library (asychronous API)
- Test cases for USB Host Library asychronous API

The following changes were made to the existing HCD:
- Removed HCD_PIPE_STATE_INVALID. Pipes are no longer invalidated
- Changed pipe commands to halt, flush, and clear. Pipes need to be manually
  halted, flush, and cleared.
- Halting and flushing a pipe will execute the pipe callback if it causes a
  HCD_PIPE_EVENT_URB_DONE event
2021-08-24 23:28:00 +08:00
morris
bb87fd8f08 Merge branch 'refactor/pcnt_driver_esp32s3' into 'master'
pcnt: soc update and hal refactor

See merge request espressif/esp-idf!14698
2021-08-20 04:23:15 +00:00
morris
71d475149d lcd: update doc unit test and example to support 8-line spi 2021-08-19 16:40:22 +08:00
bizhuangyang
8143832041 spi_master:support octal mode for esp32s2 and esp32s3
Add support for 8-line spi for lcd on esp32s2 and esp32s3

Closes https://github.com/espressif/esp-idf/issues/6371
2021-08-19 16:40:22 +08:00
morris
56760c9669 pcnt: refactor hal driver 2021-08-10 17:19:21 +08:00
laokaiyao
f863998e90 driver/i2s: support mclk 2021-08-04 10:20:03 +08:00
laokaiyao
3c57a6ac36 driver/i2s: refactor ll and hal 2021-08-04 10:20:03 +08:00
laokaiyao
d51b85989b doc/i2s: update i2s programming guide on s3 & c3 2021-08-04 10:20:03 +08:00
laokaiyao
f7f8c9c11f driver/i2s: support i2s on c3 and s3
1. Support i2s on esp32c3 and esp32s3
    2. Refactor i2s_config_t to avoid breaking change
    2. Fix a bug that receiving unavailable values from message queue when dma queue has been re-allocted
    4. Support i2s unit test on esp32c3 and esp32s3
2021-08-04 10:20:03 +08:00
houwenxiang
2f1247e1c4 driver: support I2S on ESP32-S3 & ESP32-C3
1. refactor I2S driver.
  2. support TDM mode for esp2s3 & esp32c3.
2021-08-04 10:20:03 +08:00
morris
f907009056 Merge branch 'refactor/cleanup_mcpwm_examples' into 'master'
mcpwm: more clean up (example + LL + doc)

Closes IDF-3295

See merge request espressif/esp-idf!12798
2021-07-29 10:41:07 +00:00
Armando
3ce2d85e9e adc: support adc2 working with WiFi 2021-07-28 17:50:14 +08:00
morris
88c87bfe56 mcpwm: update hal and soc naming 2021-07-26 22:32:45 +08:00
Michael (XIAO Xufeng)
fbb6b1b11a Merge branch 'bugfix/fix_uart_reset_issue_on_esp32c3' into 'master'
bugfix(uart): reset uart0 core before uart apb reset

Closes IDF-3362

See merge request espressif/esp-idf!12749
2021-07-22 07:20:58 +00:00
Chen Yi Qun
6317f5b481 add uart core reset in uart_module_enable() 2021-07-21 11:41:04 +08:00
Omar Chebib
a6e14c37b2 SPI: chip select can now be kept active if the bus has been acquired
The user can now request the chip select to remain active after the current
transfer. In order to do so, he MUST acquire the bus first with `spi_device_acquire_bus()`
function, else, an error is returned.
2021-07-21 10:39:45 +08:00
Darian Leung
d604bf05af TWAI: Fix incorrect configuration initializers for low speed bit rates
This commit fixes the timing configuration initializers for the
1K, 5K, and 10K bit rates.
2021-07-19 14:27:39 +08:00
Omar Chebib
a7b6ec85b8 Merge branch 'feature/move_memory_layout_to_heap' into 'master'
G0: Memory layouts are now part of heap components

Closes IDF-1264

See merge request espressif/esp-idf!14028
2021-07-19 06:23:19 +00:00
Michael (XIAO Xufeng)
59195b6fb3 Merge branch 'bugfix/update_gdma_soc' into 'master'
gdma: alignment setting for PSRAM transfer

Closes IDF-1524

See merge request espressif/esp-idf!13976
2021-07-17 14:04:03 +00:00
Renz Bagaporo
702e41e1c8 esp32s2: move crypto related functions 2021-07-16 20:14:26 +08:00
morris
3176ba11d8 gdma: update DMA soc data for esp32-s3 2021-07-16 14:47:09 +08:00
morris
217d3eb690 Merge branch 'feature/adc_single_sample_support_on_s3' into 'master'
adc: support adc single read on s3

Closes IDF-3118

See merge request espressif/esp-idf!14036
2021-07-16 06:32:08 +00:00
laokaiyao
27d9657b6c driver/adc: support adc single sample on s3 2021-07-15 19:13:50 +08:00
Omar Chebib
2575c0d49f i2c: fix I2C slave clock source selection
In I2C slave mode, clock source can now be changed, according to
the flags specified in `i2c_config_t` structure. Thus, ESP32-S2
can now act as an I2C slave, even with a 400KHz master clock.
2021-07-15 12:28:57 +08:00
Omar Chebib
c4f57af6c9 G0: Memory layouts are now part of heap components 2021-07-15 11:38:23 +10:00
Ondrej Kosta
a6db3a5e77 esp_eth: Change clock mode setting
RMII clock mode is made to be run-time configurable.

Closes https://github.com/espressif/esp-idf/issues/6564
Closes https://github.com/espressif/esp-idf/issues/7107
2021-07-08 14:27:31 +02:00
Michael (XIAO Xufeng)
5986b204c6 Merge branch 'feature/i2c_add_static_buffer_transfers' into 'master'
i2c: add `i2c_cmd_link_create_static()` to create commands from a given buffer

Closes IDFGH-3087

See merge request espressif/esp-idf!13013
2021-07-02 14:00:03 +00:00
Shu Chen
205cd469e9 esp32h2: update driver/hal/soc components to support esp32h2 2021-07-01 19:53:11 +08:00
Michael (XIAO Xufeng)
e8ff60544d Merge branch 'bugfix/channel_clk_independent' into 'master'
rmt: clean up and support esp32-s3 (no DMA support)

Closes IDF-3296 and IDFGH-5350

See merge request espressif/esp-idf!13244
2021-07-01 04:37:07 +00:00
Darian Leung
d37451f2c7 USB HCD: Add pipe persistence feature
This commit adds a pipe persistence feature allowing HCD pipes
to survive a port reset.
2021-06-29 21:09:27 +08:00
bizhuangyang
78c67d2384 gpio:support gpio in/out/interrupt for esp32s3(728)
Add support of gpio for esp32s3(728). Adjust some pins and comments in test_gpio.c. Add support for gpio functions for gpio19 and gpio20. Update S3 programming guide Peripheral API: gpio and sigmadelta. Add unit test for input and output function of S3 USB pins(GPIO19 and GPIO20) and C3 USB pins(GPIO18 and GPIO19). Adjust input only test in test_spi_master.c.
2021-06-28 11:44:14 +08:00
Michael (XIAO Xufeng)
99988fa454 Merge branch 'refactor/emac_hal' into 'master'
hal/emac_hal: refactor of emac_hal

Closes IDF-3155

See merge request espressif/esp-idf!13500
2021-06-22 15:34:51 +00:00
morris
8e483e34a8 rmt: restructure rmt_signal_conn_t 2021-06-22 15:29:11 +08:00
morris
9afdf54748 hal: added HAL_ASSERT 2021-06-22 11:28:01 +08:00
laokaiyao
fe354f1c50 hal/emac_hal: refactord emac_hal 2021-06-16 09:48:21 +08:00
Darian Leung
5f9692ae97 HCD: Fix multiple bugs
This commit fixes the following bugs with the HCD and USB Host HAL

- Make the setting to periodic frame list and scheduling to occur after
  a reset command
- All port errors states should put the port into the HCD_PORT_STATE_RECOVERY
  state.
- Fixed incorrect return type of hcd_port_command() function
2021-06-15 18:52:56 +08:00
Omar Chebib
cfcbca1271 i2c: optimize space allocated for read or write buffers
Only a single command will be allocated now when a read or write is
prepared in the command list. The size of a command's buffer is not
limited to 255 bytes anymore.
2021-06-09 15:21:20 +08:00
morris
d4fe219c49 mcpwm: refactor driver 2021-06-09 12:27:01 +08:00
Michael (XIAO Xufeng)
1596e336a1 Merge branch 'bugfix/spi_flash_cs_setup' into 'master'
spi_flash: fix cs line setup to make the flash driver more stable

Closes IDF-3240

See merge request espressif/esp-idf!13623
2021-06-04 07:05:05 +00:00
Alex Lisitsyn
46020fe13a usb/hal/soc: initial copy of usbh support from esp32s2
copy required usbh driver files from esp32s2
check usb host functionality using unit tests on esp32s3
2021-06-02 17:57:50 +08:00
Cao Sen Miao
08f1bbe0c7 spi_flash: fix cs line setup to make the flash driver more stable 2021-06-01 16:41:41 +08:00
daiziyan
611ecc619b docs:translate chip series comparison table and update adc_types.h 2021-05-19 16:25:27 +08:00
laokaiyao
48c848a895 driver/ledc: support invert channel output 2021-05-11 11:54:16 +08:00
Alex Lisitsyn
ea6710ce98 soc/hal: add tinyusb support esp32s3
add usb hal/soc, usb_ll files and esp32s3 target for usb
move usb_hal.h into soc common folder
soc/hal: fix soc and periph for usb
tinyusb: fix tinyusb io header
hal: usb_ll fix pull up/down config for esp32s3
soc/hal: fix peripheral addresses
2021-05-06 16:20:54 +08:00
Cao Sen Miao
0d81edb174 spi_flash: refactoring flash encryption into new api 2021-04-25 17:09:25 +08:00
Michael (XIAO Xufeng)
bea022ce1c Merge branch 'refactor/usb_common_and_hal_types' into 'master'
Separate USB HAL and common USB types

Closes IDF-2931

See merge request espressif/esp-idf!12642
2021-04-23 12:50:35 +00:00
Angus Gratton
0be81903cc Merge branch 'bugfix/hal_duplicated_interrupt_functions' into 'master'
[hal]: merged duplicated HAL layer functions

Closes IDF-2308

See merge request espressif/esp-idf!12444
2021-04-23 07:47:51 +00:00
Angus Gratton
96c2acd9a8 Merge branch 'refactor/strip_systimer_hal_layer' into 'master'
refactor HAL driver of systimer to a common systimer_hal

Closes IDF-2996

See merge request espressif/esp-idf!13027
2021-04-23 07:45:31 +00:00
morris
ec898b771e systimer: strip hal driver 2021-04-22 21:08:39 +08:00
morris
7c1e1c9e2d systimer: update soc data 2021-04-22 21:07:35 +08:00
morris
7eb9ecb4f6 esp_ds: move timeout mechanism to driver layer 2021-04-22 21:07:35 +08:00
Darian Leung
2906a25988 Separate USB HAL and common USB types
This commit separates out the common USB types used throughout most of the stack into its
own header file inside the USB component. The types used in the USB HAL are now exclusive
to the HAL.
2021-04-22 19:24:48 +08:00
Armando
85e29dace7 spi_slave_hd: add callback after data is loaded to the DMA for segment mode 2021-04-20 20:08:29 +08:00
Michael (XIAO Xufeng)
1f29036ead Merge branch 'feat/c3_driver_api_cleanup' into 'master'
driver: cleanup i2c, i2s on C3

Closes IDF-2759 and IDF-2760

See merge request espressif/esp-idf!12329
2021-04-13 09:00:11 +00:00
Michael (XIAO Xufeng)
8cfcf6da7a Merge branch 'bugfix/enable_gpio18_gpio19_esp32c3' into 'master'
gpio: Disable USB JTAG when setting pins 18 and 19 as GPIOs on ESP32C3

Closes IDF-2964

See merge request espressif/esp-idf!12753
2021-04-12 09:39:55 +00:00
Michael (XIAO Xufeng)
67941fc495 i2s: removed unsupported features on different targets 2021-04-12 15:51:54 +08:00
Michael (XIAO Xufeng)
82e4a2431a i2c: removed unsupported features on different targets 2021-04-12 15:51:19 +08:00
Michael (XIAO Xufeng)
925dacd7fb Merge branch 'bugfix/remove_HSPI_macro_on_c3' into 'master'
spi: remove HSPI macros on esp32c3 and esp32s3

Closes IDF-2535

See merge request espressif/esp-idf!12637
2021-04-08 09:33:18 +00:00
Omar Chebib
cd79f3907d gpio: Disable USB JTAG when setting pins 18 and 19 as GPIOs on ESP32C3
When `DIS_USB_JTAG` eFuse is NOT burned (`False`), it is not possible
to set pins 18 and 19 as GPIOs. This commit solves this by manually
disabling USB JTAG when using pins 18 or 19.
The functions shall use `gpio_hal_iomux_func_sel` instead of
`PIN_FUNC_SELELECT`.
2021-04-08 14:01:18 +08:00
Armando
9b9ea71ff9 spi: remove HSPI macro on esp32c3 and esp32s3 2021-04-06 13:42:49 +08:00
Jakob Hasse
b23c9142d5 [hal]: cleaned up interrupt mask functions
* Functions for setting and clearing interrupts
  as well as function to read interrupt mask
  should be clearer now.
* Using hal layer interrupt set and clear
  functions in esp_wifi component
2021-04-06 11:54:13 +08:00
Darian Leung
2f58060921 TWAI: FIFO overrun handling and errata workarounds
This commit adds handling for FIFO overruns and
adds workarounds for HW errats on the ESP32.

Closes https://github.com/espressif/esp-idf/issues/2519
Closes https://github.com/espressif/esp-idf/issues/4276
2021-03-30 14:17:31 +08:00
Armando
cc6bfcd9ac adc: apply adc power API to adc driver
Closes https://github.com/espressif/esp-idf/issues/6269
Closes https://github.com/espressif/esp-idf/issues/6682
2021-03-26 17:58:00 +08:00
Armando
0e0baee25a adc: add implementation of missed public API
Added ``adc1_pad_get_io_num``, ``adc2_pad_get_io_num`` and
``adc_vref_to_gpio``.
2021-03-26 12:04:46 +08:00
Armando
00a3f48bd8 adc: refactor adc single read api on esp32c3 2021-03-26 12:04:46 +08:00
Armando
69a0f8b9bb adc: seperate hal layer and driver layer 2021-03-26 12:04:46 +08:00
Michael (XIAO Xufeng)
4028d4e083 Merge branch 'feature/mcpwm_add_peripheral_signal_list' into 'master'
mcpwm: added peripheral signal description list

See merge request espressif/esp-idf!12480
2021-03-18 10:07:59 +00:00
Jiang Jiang Jian
d38eabf0c2 Merge branch 'bugfix/spi_flash_compatible_with_rom_c3_and_s3' into 'master'
spi_flash: make spiflash compatible with ESP32C3 and ESP32S3 ROM

See merge request espressif/esp-idf!12713
2021-03-18 04:08:06 +00:00
morris
f5ca47c0fc mcpwm: rename macros related to soc capbility 2021-03-16 21:53:59 +08:00
morris
d0be56b8fe lcd: add LL driver for esp32-s3 2021-03-13 22:31:30 +08:00
jiangguangming
ae04518a32 spi_flash: make spiflash compatible with ESP32C3 and ESP32S3 ROM 2021-03-12 17:31:13 +08:00
Darian Leung
424e1e1886 Add USB HCD
This commit adds the USB HCD (Host Controller Driver) and accompanying unit tests.
2021-02-26 23:13:42 +08:00
Cao Sen Miao
a8343bc470 esp_system: support gpio wakeup from deep sleep on esp32c3 2021-02-26 12:26:49 +08:00
morris
7b37158ede rmt: distinguish group and channel in HAL layer 2021-02-25 12:42:23 +08:00
Armando
346dea206e spi_slv_hd: add hal_trans_finish comments for clarifying risk 2021-02-24 12:01:31 +08:00
Armando
8d90d3072c spi_slave_hd: refactor the hal append api to remove the spinlock 2021-02-24 12:01:31 +08:00
Omar Chebib
727481d71c gpio: enable GPIO19 on ESP32C3 boards 2021-02-22 08:44:55 +00:00
Armando
db3bf8b544 spi: refactor spi_common dma allocator 2021-02-22 07:06:05 +00:00
Armando
c438ad5d72 spi: apply gdma allocator to SPI 2021-02-22 07:06:05 +00:00
Marius Vikhammer
04df1f3a42 CI: enable example builds for C3
Enables building C3 examples in CI.

Fixes related warnings/errors and disables examples that cannot run.
2021-02-09 12:04:02 +08:00
Marius Vikhammer
548fd02d10 docs: initial update of programming guide for C3
Updates "front page" content, get-started, and api-guides with C3 content

Enable building and publishing of C3 docs in CI
2021-02-01 15:40:02 +08:00
Ivan Grokhotkov
bb1f75179b Merge branch 'bugfix/freertos_systimer_stall_when_cpu_halted' into 'master'
freertos: stall systimer while CPU is in debug mode

See merge request espressif/esp-idf!12063
2021-01-29 07:02:30 +08:00
Krzysztof Budzynski
9a5bd86d54 Merge branch 'docs/update_docs_based_on_the_second_batch_of_customer_feedbacks' into 'master'
docs: update documents based on doc-855, doc-885, doc-889, doc-897

See merge request espressif/esp-idf!12124
2021-01-26 16:21:26 +08:00
Michael (XIAO Xufeng)
c99e891201 Merge branch 'feature/sync_adc_changes_from_c3_to_master_last' into 'master'
adc: sync adc changes from c3 to master (last time)

Closes IDF-2694

See merge request espressif/esp-idf!12134
2021-01-26 12:52:20 +08:00
Michael (XIAO Xufeng)
2b83418141 adc: add fallback calibration method
Also:
1. Separate static configuration into init phase to improve
performance
2. Add a init code config layer to avoid duplicated configuration
3. Add a HW_CALIBRATION_V1 caps
2021-01-25 20:30:42 +08:00
Wang Fang
7df1cad1d6 docs: This MR does the following updates:
1. Provided more information regarding I2S_COMM_FORMAT_STAND_PCM_SHORT and I2S_COMM_FORMAT_STAND_PCM_LONG
2. Added --output flag for partition table read instructions
3. Reordered the header files for esp-ble-mesh
4. Reordered the setup instructions for Ubuntu and CentOS
2021-01-25 11:10:08 +00:00
Michael (XIAO Xufeng)
7a20ea5f0e Merge branch 'feature/support_flash_sus_res_c3' into 'master'
spi_flash: Add flash auto-suspend auto-resume mode on esp32c3

Closes IDF-2591

See merge request espressif/esp-idf!11888
2021-01-25 17:41:32 +08:00
Armando
f9ec7ddda3 adc: add comment for ADC sampling frequency 2021-01-25 04:51:40 +00:00
Armando
d8a4b247b9 adc_digi: update_adc_api_for_5M_freq_limit
The ``adc_digi_config_t`` struct is modified on esp32c3: configuration
of clock divider factors are not provided anymore. The SARADC sampling
frequency is provided instead. In this way, we can handle the frequency
limit better.
2021-01-25 04:51:40 +00:00
fuzhibo
19fb11549b driver(adc): update adc ll and hal driver for esp32c3 2021-01-25 04:51:40 +00:00
Armando
02600309c8 adc: fix some regression issues 2021-01-25 04:51:40 +00:00
Armando
b38f4646de adc_digi: add dma drivers 2021-01-25 04:51:40 +00:00
Cao Sen Miao
f3e79ca166 spi_flash(c3): add boya chip support for suspend feature 2021-01-25 11:14:06 +08:00
Cao Sen Miao
9905da46e0 spi_flash: Add auto suspend mode on esp32c3 2021-01-25 11:14:02 +08:00
KonstantinKondrashov
1f37a5f162 spi_flash(esp32-s2): Add the workaround of a reboot issue when SPI HW suspend is enabled 2021-01-25 11:13:38 +08:00
Ivan Grokhotkov
d7bac619ec freertos: stall systimer while CPU is in debug mode 2021-01-24 11:32:17 +00:00
Michael (XIAO Xufeng)
06f22fc4b0 Merge branch 'feature/new_restart_mode_driver_and_ut_for_spi_slave_hd' into 'master'
spi_slave_halfduplex: append mode driver

See merge request espressif/esp-idf!10845
2021-01-24 09:27:12 +08:00
Armando
0538dc2d93 spi_slave_hd: add DMA Append Mode feature 2021-01-21 18:53:53 +08:00
Angus Gratton
cfdd7f0f22 Merge branch 'feature/c3_crypto_gdma' into 'master'
AES/SHA: GDMA crypto driver

Closes IDF-2192 and IDF-2501

See merge request espressif/esp-idf!12014
2021-01-20 16:42:39 +08:00
Li Shuai
f168ac3b39 light sleep: add cpu power down support for esp32c3 2021-01-19 14:51:50 +08:00
Li Shuai
355dd10257 light sleep: dfs support for esp32c3 2021-01-19 14:50:58 +08:00