Commit Graph

1427 Commits

Author SHA1 Message Date
Anton Maklakov
75c0066f93 Fix remaining -Wstrict-prototypes warnings 2019-08-01 16:28:56 +07:00
Anton Maklakov
afbaf74007 tools: Mass fixing of empty prototypes (for -Wstrict-prototypes) 2019-08-01 16:28:56 +07:00
redchenjs
ff325e84b6 Bugfix(i2s): fixed i2s left/right channels swapped issue.
The right channel data is in the high position, so the I2S_TX_MSB_RIGHT & I2S_RX_MSB_RIGHT bits should be set.

Merges https://github.com/espressif/esp-idf/pull/3717

closes https://github.com/espressif/esp-idf/issues/3399
2019-07-31 17:58:23 +08:00
kooho
f98e7bbccf Update LEDC, PCNT,Timer_Group driver for esp32s2beta. 2019-07-31 16:03:22 +08:00
Angus Gratton
eae6f5a1d6 Merge branch 'feature/esp32s2beta_rmt_driver' into 'feature/esp32s2beta'
Driver(RMT): Update RMT driver for esp32s2beta

See merge request espressif/esp-idf!5227
2019-07-30 18:21:59 +08:00
kooho
64f81aefae bugfix(GPIO): Fixed the bug that GPIO enables interrupts on one core,
but registers interrupt service routines on another core

closes https://github.com/espressif/esp-idf/issues/2808
closes https://github.com/espressif/esp-idf/issues/2845
2019-07-29 11:09:07 +00:00
Michael (XIAO Xufeng)
b98b4c3886 sdmmc_io: support to print CIS information
Currently only ESP slaves can be parsed correctly.
2019-07-29 10:41:17 +08:00
chenjianqiang
e43513b610 bugfix(uart): uniform AT_CMD char configuration 2019-07-18 19:24:13 +08:00
chenjianqiang
91ae40e2ff uart: multichip support 2019-07-18 15:57:00 +08:00
chenjianqiang
4cc962353c feat(uart): update uart driver for esp32s2beta 2019-07-18 15:57:00 +08:00
David Cermak
c6c6cd7179 rtc: fix minor malloc issues found by static analyzer 2019-07-17 14:45:17 +00:00
houwenxiang
6a8fe5cf79 Update RMT driver for esp32s2beta 2019-07-11 19:15:05 +08:00
chenjianqiang
667113cf94 feat(i2c): update i2c driver for esp32s2beta 2019-07-10 11:41:36 +08:00
kooho
09a63cca51 bugfix(UART): fixed two UART issues:
1. uart_wait_tx_done works incorrect when sending a byte of data.
2. uart_set_rx_timeout sets an incorrect rx timeout value when ref_tick is enabled

closes https://github.com/espressif/esp-idf/issues/3631
2019-07-08 12:27:14 +08:00
Angus Gratton
3ff01d60a4 Merge branch 'fix/sdio_slave_reset_infloop_leak' into 'master'
sdio_slave: fix the send_flush infinite loop issue

See merge request idf/esp-idf!5365
2019-07-03 08:36:26 +08:00
Vikram Dattu
da77dcb0be Changed log level for spi_master
There are lot of prints of `Allocate TX buffer for DMA`
Changed these from `ESP_LOGI` to `ESP_LOGD`

Signed-off-by: Vikram Dattu <vikram.dattu@espressif.com>
2019-07-01 20:04:15 +00:00
Jiang Jiang Jian
e2b88207b4 Merge branch 'feature/esp32s2beta_wifi' into 'feature/esp32s2beta'
run WiFi on ESP32SBETA

See merge request idf/esp-idf!5293
2019-06-30 00:40:34 +08:00
Xia Xiaotian
99ef587a05 run WiFi on ESP32SBETA 2019-06-28 11:34:49 +08:00
Ivan Grokhotkov
13d9c483b3 Merge branch 'bugfix/i2s_apll_clock_fix' into 'master'
driver/i2s: fix apll_clock_rate for different sample rates

See merge request idf/esp-idf!5159
2019-06-28 03:49:11 +08:00
Michael (XIAO Xufeng)
65c0d354e4 spi_common: add interface to get whether the bus is on IOMUX 2019-06-27 13:27:27 +08:00
Michael (XIAO Xufeng)
b76ab9142d spi_common: deprecate some public APIs 2019-06-27 13:27:26 +08:00
Michael (XIAO Xufeng)
28b2e113ca spi_master: move the spi_bus_init function into common header 2019-06-27 13:27:26 +08:00
Michael (XIAO Xufeng)
9805902482 sdio_slave: fix the send_flush infinite loop issue
Also add some helper functions.
2019-06-27 13:24:22 +08:00
Michael (XIAO Xufeng)
17378fd4c2 spi: support new chip esp32s2beta 2019-06-23 12:17:27 +08:00
Michael (XIAO Xufeng)
9b13a04abf spi: multichip support
move hardcoded numbers, etc. into soc files.
create headers for shared types which needs to be documented.

(MINOR CHANGE)
2019-06-22 19:08:47 +08:00
Renz Christian Bagaporo
9b350f9ecc cmake: some formatting fixes
Do not include bootloader in flash target when secure boot is enabled.
Emit signing warning on all cases where signed apps are enabled (secure
boot and signed images)
Follow convention of capital letters for SECURE_BOOT_SIGNING_KEY
variable, since it is
relevant to other components, not just bootloader.
Pass signing key and verification key via config, not requiring
bootloader to know parent app dir.
Misc. variables name corrections
2019-06-21 19:53:29 +08:00
Renz Christian Bagaporo
9eccd7c082 components: use new component registration api 2019-06-21 19:53:29 +08:00
Ajita Chavan
070b86eee5 i2s: test case for variation in apll clock rate 2019-06-20 16:40:58 +00:00
redchenjs
430d9c6fba i2s: fix a bug when calculating i2s apll parameters
Closes https://github.com/espressif/esp-idf/issues/2634
Closes https://github.com/espressif/esp-idf/issues/3380
Fixes https://github.com/espressif/esp-idf/issues/3407
2019-06-20 16:40:58 +00:00
Angus Gratton
126b687c75 Merge branch 'refactor/vfs_uart_multichip_support' into 'master'
vfs_uart & uart: add multichip support

See merge request idf/esp-idf!5298
2019-06-20 18:31:24 +08:00
Angus Gratton
90008e3fd6 Merge branch 'feature/spi_driver_support_multi_chip' into 'master'
spi: multichip support

See merge request idf/esp-idf!5234
2019-06-20 16:45:06 +08:00
morris
b395279196 Merge branch 'feature/esp32s2beta_fix_rtcio' into 'feature/esp32s2beta'
fix rtc bug in esp32s2beta

See merge request idf/esp-idf!5294
2019-06-20 13:42:37 +08:00
Michael (XIAO Xufeng)
0bbeb502a8 atomic: support for esp32s2beta 2019-06-20 12:06:52 +08:00
chenjianqiang
cf2ba210ef uart: multichip support 2019-06-20 11:32:22 +08:00
fuzhibo
f5a21845fd fix rtc bug in esp32s2beta 2019-06-20 11:26:21 +08:00
Michael (XIAO Xufeng)
5c9dc44c49 spi: multichip support
move hardcoded numbers, etc. into soc files.
create headers for shared types which needs to be documented.

(MINOR CHANGE)
2019-06-20 10:38:52 +08:00
suda-morris
3f7a571c90 fix errors when ci testing for esp32 2019-06-19 15:31:47 +08:00
Michael (XIAO Xufeng)
1138133a78 spi: fix a possible concurrency issue 2019-06-17 00:16:01 +00:00
fuzhibo
29ea0dec76 Driver: gpio and rtcio dirver update 2019-06-14 20:27:26 +08:00
David Cermak
d127849d80 can: suppress clang tidy warning about nullptr dereference 2019-06-13 16:23:20 +02:00
Ivan Grokhotkov
dcaae4a5fc esp32s2beta: convert some todos to warnings 2019-06-12 15:53:57 +08:00
suda-morris
4a79d750a5 clean up build warnings 2019-06-11 13:07:37 +08:00
Angus Gratton
ddbd09eb15 esp32/esp32s2beta: Extract common SPIRAM options into esp_commmon component 2019-06-11 13:07:37 +08:00
suda-morris
82c27a39f2 can build and run hello-world app 2019-06-11 13:07:37 +08:00
suda-morris
84b2f9f14d build and link hello-world for esp32s2beta 2019-06-11 13:07:37 +08:00
suda-morris
91508ca27f add esp32s2beta in soc component 2019-06-11 13:06:32 +08:00
Angus Gratton
2331597ed2 Merge branch 'bugfix/ticks_to_wait_for_uart_and_i2c' into 'master'
driver: Fix ticks_to_wait for uart and i2c

Closes IDFGH-964

See merge request idf/esp-idf!5021
2019-06-11 08:41:44 +08:00
Konstantin Kondrashov
ed22949847 driver: Add uart and i2c UTs to check ticks_to_wait in some functions 2019-06-05 10:38:23 +08:00
Angus Gratton
045aaf6fb0 Merge branch 'feature/add_xxx_periph_h' into 'master'
soc: Add xxx_periph.h for all modules

Closes IDF-192

See merge request idf/esp-idf!4952
2019-06-04 13:24:14 +08:00
Konstantin Kondrashov
355f209dba uart: Fix ticks_to_wait when 0 or expired
Closes: https://github.com/espressif/esp-idf/issues/3301

Closes: IDFGH-964
2019-06-04 11:50:54 +08:00
Konstantin Kondrashov
22a30e2740 i2c: Fix ticks_to_wait when 0 or time expired
Closes: https://github.com/espressif/esp-idf/issues/3301

Closes: IDFGH-964
2019-06-04 11:50:54 +08:00
Konstantin Kondrashov
399d2d2605 all: Using xxx_periph.h
Using xxx_periph.h in whole IDF instead of xxx_reg.h, xxx_struct.h, xxx_channel.h ... .

Cleaned up header files from unnecessary headers (releated to soc/... headers).
2019-06-03 14:15:08 +08:00
lenhart
920d35b5d0 Update i2c documentation
Description for i2c_slave_read_buffer had leftover from copying from write fct. data
pointer description described the wrong way (writing into internal buffer)

Closes https://github.com/espressif/esp-idf/pull/3268
2019-05-29 18:02:18 +05:30
Oleg Antonyan
4430456b64 Change SPI_USE_RXDATA->SPI_TRANS_USE_RXDATA and SPI_USE_TXDATA->SPI_TRANS_USE_TXDATA on documentation
Closes https://github.com/espressif/esp-idf/pull/2802
2019-05-29 18:02:18 +05:30
Jeroen Domburg
0e7442bb7a Merge branch 'feature/spi_slave_support_hal' into 'master'
spi_slave: add HAL support

See merge request idf/esp-idf!4830
2019-05-22 13:42:11 +08:00
Roland Dobai
0ae53691ba Rename Kconfig options (components/esp32) 2019-05-21 09:09:01 +02:00
Roland Dobai
e9f1011b1b Rename Kconfig options (components/driver) 2019-05-21 09:09:01 +02:00
Michael (XIAO Xufeng)
33db6d608e spi_slave: add HAL support 2019-05-20 07:34:34 +00:00
Sachin Parekh
e6a714480d unit-test-app: freertos_compliance config added
Signed-off-by: Sachin Parekh <sachin.parekh@espressif.com>
2019-05-13 16:39:19 +05:30
Sachin Parekh
5979086379 timer: port*_CRITICAL vanilla FreeRTOS compliance
Signed-off-by: Sachin Parekh <sachin.parekh@espressif.com>
2019-05-13 16:39:19 +05:30
Sachin Parekh
7f37824eb7 rtc_module: port*_CRITICAL vanilla FreeRTOS compliance
Signed-off-by: Sachin Parekh <sachin.parekh@espressif.com>
2019-05-13 16:39:19 +05:30
Sachin Parekh
da41885e85 rmt: port*_CRITICAL vanilla FreeRTOS compliance
Signed-off-by: Sachin Parekh <sachin.parekh@espressif.com>
2019-05-13 16:39:19 +05:30
Sachin Parekh
e9898b1280 periph_ctrl: port*_CRITICAL vanilla FreeRTOS compliance
Signed-off-by: Sachin Parekh <sachin.parekh@espressif.com>
2019-05-13 16:39:19 +05:30
michael
0b523c2300 spi_master: fix the dual/quad io issue
introduced in f871cc5ffa

The issue is caused by

1. The hal didn't pass the io_mode to LL.
2. The setup_device function overwrite the trans-specific settings.
2019-04-27 01:36:47 +08:00
Angus Gratton
a20d02b7f1 Merge branch 'feature/remove_dependency_to_soc' into 'master'
global: remove dependency to soc everywhere except driver and kernel components

See merge request idf/esp-idf!4678
2019-04-18 08:08:41 +08:00
Ivan Grokhotkov
bb4f5617ab test: clean up "leaks" tags from most unit tests 2019-04-16 20:07:40 +08:00
Michael (XIAO Xufeng)
562af8f65e global: move the soc component out of the common list
This MR removes the common dependency from every IDF components to the SOC component.

Currently, in the ``idf_functions.cmake`` script, we include the header path of SOC component by default for all components.
But for better code organization (or maybe also benifits to the compiling speed), we may remove the dependency to SOC components for most components except the driver and kernel related components.

In CMAKE, we have two kinds of header visibilities (set by include path visibility):

(Assume component A --(depends on)--> B, B is the current component)

1. public (``COMPONENT_ADD_INCLUDEDIRS``): means this path is visible to other depending components (A) (visible to A and B)
2. private (``COMPONENT_PRIV_INCLUDEDIRS``): means this path is only visible to source files inside the component (visible to B only)

and we have two kinds of depending ways:

(Assume component A --(depends on)--> B --(depends on)--> C, B is the current component)

1. public (```COMPONENT_REQUIRES```): means B can access to public include path of C. All other components rely on you (A) will also be available for the public headers. (visible to A, B)
2. private (``COMPONENT_PRIV_REQUIRES``): means B can access to public include path of C, but don't propagate this relation to other components (A). (visible to B)

1. remove the common requirement in ``idf_functions.cmake``, this makes the SOC components invisible to all other components by default.
2. if a component (for example, DRIVER) really needs the dependency to SOC, add a private dependency to SOC for it.
3. some other components that don't really depends on the SOC may still meet some errors saying "can't find header soc/...", this is because it's depended component (DRIVER) incorrectly include the header of SOC in its public headers. Moving all this kind of #include into source files, or private headers
4. Fix the include requirements for some file which miss sufficient #include directives. (Previously they include some headers by the long long long header include link)

This is a breaking change. Previous code may depends on the long include chain.
You may need to include the following headers for some files after this commit:

- soc/soc.h
- soc/soc_memory_layout.h
- driver/gpio.h
- esp_sleep.h

The major broken include chain includes:

1. esp_system.h no longer includes esp_sleep.h. The latter includes driver/gpio.h and driver/touch_pad.h.
2. ets_sys.h no longer includes soc/soc.h
3. freertos/portmacro.h no longer includes soc/soc_memory_layout.h

some peripheral headers no longer includes their hw related headers, e.g. rom/gpio.h no longer includes soc/gpio_pins.h and soc/gpio_reg.h

BREAKING CHANGE
2019-04-16 13:21:15 +08:00
Angus Gratton
f871cc5ffa Merge branch 'feat/spi_hal_support' into 'master'
spi_master: refactor and add HAL support

See merge request idf/esp-idf!4159
2019-04-15 07:57:11 +08:00
Ivan Grokhotkov
7728f8755e Merge branch 'feat/example_sdio_over_spi' into 'master'
sdio: support SDIO over spi

See merge request idf/esp-idf!3069
2019-04-12 16:12:57 +08:00
Konstantin Kondrashov
5021129e71 Add support a [leaks] tag for UT 2019-04-12 09:31:23 +08:00
michael
8a364b4bdf sdmmc: support SDIO over SPI 2019-04-12 02:24:28 +08:00
Ivan Grokhotkov
7027d2dfe8 spi_master: compile as C11 due to use of stdatomic.h
stdatomic.h is available both in newlib and GCC include directories.
Normally (if you invoke the compiler without any flags) GCC include
directories are first on the list, so GCC’s stdatomic.h is used. In
IDF, we used to pass newlib include path as an extra include
directory, so newlib’s stdint.h got included instead.

Newlib 2.2.0 stdatomic implementation is compatible with -std=gnu99
but incompatible with -std=gnu11. And GCC doesn’t support atomic_load
with -std=gnu99 (it’s a C11 feature). So when we used atomic_load
with -std=gnu99, it worked due to newlib’s header.

Since we are no longer going to be including newlib headers into IDF,
GCC stdatomic will be used instead. Hence, add -std=gnu11 for source
files which use atomic features.
2019-04-10 13:48:57 +08:00
morris
f5b03c9ea3 misc adjustment of esp32 component 2019-04-03 19:57:46 +08:00
Michael (XIAO Xufeng)
af2fc96ee1 spi_master: refactor and add HAL support 2019-03-28 17:14:50 +08:00
morris
a2f07b0806 move common include files from esp32 into esp_common 2019-03-26 11:57:03 +08:00
morris
c159984264 separate rom from esp32 component to esp_rom
1. separate rom include files and linkscript to esp_rom
2. modefiy "include rom/xxx.h" to "include esp32/rom/xxx.h"
3. Forward compatible
4. update mqtt
2019-03-21 18:51:45 +08:00
Ivan Grokhotkov
106dc05903 Merge branch 'feature/specify_includes_belonging_esp32' into 'master'
move esp32 chip specific includes to esp32/xxx.h

See merge request idf/esp-idf!4534
2019-03-21 18:34:08 +08:00
Ivan Grokhotkov
ce07a1057c Merge branch 'feature/make-debug-verbose-usable' into 'master'
logs: Make verbose and debug logging cleaner

Closes IDFGH-782

See merge request idf/esp-idf!4578
2019-03-21 18:29:50 +08:00
Per Malmberg
36c73e6d70 Easier use of -Wsign-conversion warnings needs changes.
Merges https://github.com/espressif/esp-idf/pull/3129
2019-03-21 15:08:04 +08:00
Anuj Deshpande
13cf867023 logs: Make verbose and debug logging cleaner
* Closes #3193
* Closes IDFGH-782

The logs that are deleted in this commit make debug and verbose mode
unusable.
2019-03-21 11:54:04 +05:30
Angus Gratton
34d118d445 Merge branch 'feature/optimized_gpio_intr_service' into 'master'
driver: Add optimization by speed in ISR functions for gpio, rmt, pcnt

Closes IDF-328

See merge request idf/esp-idf!4241
2019-03-20 14:19:17 +08:00
Ivan Grokhotkov
060cf9d6b4 Merge branch 'power_management/i2s+i2c' into 'master'
Power management/i2s+i2c

See merge request idf/esp-idf!4338
2019-03-19 17:27:59 +08:00
Ivan Grokhotkov
f0a82d7185 driver/i2c: write i2c command structure to hardware in one operation
GCC compiler can generate 8-bit stores when modifying bitfields of
volatile structs (https://github.com/espressif/esp-idf/issues/597).
In the specific case of I2C driver, this resulted in byte_num field
to be written using s8i. However the peripheral requires 32-bit
writes, and ignores 8-bit writes. This change modifies the code to
compose the 32-bit command register value first, and then write the
complete value to the hardware.
2019-03-18 18:23:50 +08:00
morris
956c25dedd move esp32 chip specific includes to esp32/xxx.h 2019-03-18 17:14:05 +08:00
Sachin Parekh
4de5ae7468 PM: I2S and I2C added in the Power Management docs
Signed-off-by: Sachin Parekh <sachin.parekh@espressif.com>
2019-03-18 08:21:21 +00:00
Sachin Parekh
7fc6445035 I2S: Enable Power Management locks
Acquires PM_APB_FREQ_MAX lock when carrying any transaction on I2S if
Power Management Framework is enabled.

Signed-off-by: Sachin Parekh <sachin.parekh@espressif.com>
2019-03-18 08:21:21 +00:00
Sachin Parekh
d0234ad24a I2C: Enable Power Management locks
Acquires PM_APB_FREQ_MAX lock when carrying any transaction on I2C if
Power Management Framework is enabled.

Signed-off-by: Sachin Parekh <sachin.parekh@espressif.com>
2019-03-18 08:21:21 +00:00
Konstantin Kondrashov
b1b5849c4c rmt/driver: Sped the rmt_driver_isr_default ISR
Used __builtin_ctz function to sped ISR.
2019-03-13 13:50:43 +00:00
Konstantin Kondrashov
3307735bc0 pcnt/driver: Sped the pcnt_intr_service ISR
Used __builtin_ctz function to sped ISR.
2019-03-13 13:50:43 +00:00
Pieter du Preez
b8dc48ab18 gpio/driver: Sped the gpio_intr_service ISR up by 1.5 uSeconds (+-50% faster).
Removed as much branching (if statements) from the
gpio_intr_service ISR, as possible and split the while loop into
two. Also forced writing the two status*_w1tc variables only once,
instead of every time after calling the external function hooks.

The measurements below, was done using the following tools:

Toolchain version: crosstool-ng-1.22.0-80-g6c4433a
Compiler version: 5.2.0

Here follows a comparison of the gpio_intr_service ISR's
execution time, using a DS1054 oscilloscope. All the time spent
calling external functions, via the function pointers
gpio_isr_func[gpio_num].fn, were disregarded.

With OPTIMIZATION_FLAGS = -Og, 1.34 uSeconds faster:

3.22 uSec (with this patch)
4.56 uSec (with commit 71c90ac4)

100 - (100 * 4.56 / 3.22) = 42% faster

With OPTIMIZATION_FLAGS = -Os, 1.65 uSeconds faster:

2.89 uSec (with this patch)
4.54 uSec (with commit 71c90ac4)

100 - (100 * 4.54 / 2.89) = 57% faster

Signed-off-by: Konstantin Kondrashov <konstantin@espressif.com>

Merges https://github.com/espressif/esp-idf/pull/2861
2019-03-13 13:50:43 +00:00
Ivan Grokhotkov
7541d23523 Merge branch 'feat/spi_master_variable_dummy' into 'master'
spi_master: add support for variable dummy length in a same device

See merge request idf/esp-idf!4360
2019-03-13 15:15:58 +08:00
Ivan Grokhotkov
e77540b695 Merge branch 'test/spi_sio_test' into 'master'
spi: add test for sio mode

See merge request idf/esp-idf!3416
2019-03-13 15:15:43 +08:00
He Yin Ling
8f3fe52b5a test: temp disable spi master slave mode test 2019-03-10 06:21:37 +00:00
Ivan Grokhotkov
dace2d6bc5 Merge branch 'bugfix/uart_fix_critical_section_api_from_isr' into 'master'
uart: use correct critical section API from ISR context

See merge request idf/esp-idf!4301
2019-03-04 16:24:22 +08:00
michael
12a6664afa spi test: describe the wiring of param test in the comments 2019-02-28 19:43:58 +08:00
Mahavir Jain
e9652e8ef3 uart: use correct critical section API (portENTER_CRITICAL_ISR) from ISR context 2019-02-27 08:36:47 +00:00
michael
b812520b19 spi_master: add support for variable dummy length in a same device
Resolves https://github.com/espressif/esp-idf/issues/2741
2019-02-27 02:13:33 +08:00
Angus Gratton
3952d25a99 Merge branch 'feature/add_api_get_rmt_idle_level' into 'master'
feature(rmt):  fixed some RMT related issues.

See merge request idf/esp-idf!3864
2019-02-26 11:57:10 +08:00
Angus Gratton
ca72c3e97b Merge branch 'bugfix/fix_dig_gpio_unable_hold_bug' into 'master'
bugfix(gpio):  fixed digital gpio unable hold bug during deep-sleep.

See merge request idf/esp-idf!3877
2019-02-26 11:56:27 +08:00
Angus Gratton
280d39aedd Merge branch 'bugfix/i2s_pdm_adc_use_apll' into 'master'
bugfix(i2s): allow to use apll in pdm/adc/dac mode

See merge request idf/esp-idf!3800
2019-02-26 11:47:49 +08:00
Angus Gratton
b966ef9fcd Merge branch 'bugfix/update_ledc_register_and_fix_fade_scale' into 'master'
Bugfix (ledc):  Fixed ledc fade scale  bug

See merge request idf/esp-idf!4109
2019-02-26 11:46:28 +08:00
Darian Leung
099b83af67 CAN: Add functions to clear queues and fix multiple bugs
This commits adds the functions can_clear_transmit_queue() and
can_clear_receive_queue(). Closes #2906

The following bug are fixed:

- CAN_IO_UNUSED is now explicitly cast to enum type. Closes #2825
- Fix multiple documentation errors. Closes #2898, Closes #2794
- can_reconfigure_alerts() returns incorrect current_alerts. Closes #3028
- Add missing header file. Closes #3065
2019-02-18 21:31:33 +08:00
Michael (XIAO Xufeng)
86bcd56109 spi: fix the bug of connecting SPI peripheral to read-only pins
The requirements of pin capabilites is different for spi master and
slave.  The master needs CS, SCLK, MOSI to be output-able, while slave
needs MISO to be output-able.

Previous code is for master only.

This commit allows to place other 3 pins than MISO on input-only pins
for slaves. Refactoring for spi_common is also included.

Resolves https://github.com/espressif/esp-idf/issues/2455
2019-02-16 20:03:14 +08:00
michael
2dc3c61114 test: add unit test for spi sio mode 2019-01-30 20:57:26 +08:00
michael
305354d0a2 test: change spi test host to macros 2019-01-30 20:57:25 +08:00
Roland Dobai
37126d3451 Correct Kconfigs according to the coding style 2019-01-29 13:37:01 +01:00
michael
41e58bc419 spi: add new test for timing and mode
New unit tests added
------------------------

**Local:** Local test uses the GPIO matrix to connect the master and the
slave on the same board. When the master needs the iomux, the master
uses the GPIOs of its own, the slave connect to the pins by GPIO matrix;
When the slave needs the iomux, the slave uses the GPIOs of its own, the
master connects to the pins by GPIO matrix.

- Provide a new unit test which performs freq scanning in mode 0. It
scans frequency of 1M, 8M, 9M and all frequency steps up to the maximum
frequency allowed.

**M & S**: Master & slave tests performs the test with two boards. The
master and slave use iomux or gpio matrix according to the config.

- Provide a new unit test which performs freq scanning in mode 0. It
scans frequency of 1M, 8M, 9M and all frequency steps up to the maximum
frequency allowed.

- Provide a new unit test which performs mode test with significant
frequencies. It tests mode 0,1,2,3 with low frequency, and the maximum
frequency allowed.
2019-01-26 00:10:41 +08:00
Michael (XIAO Xufeng)
155006243e spi_master: fix the timing a little so that can assign delay half clock manually 2019-01-26 00:10:41 +08:00
michael
58955a79a2 spi_slave: improve the timing configuration
SPI Slave
===========

- Correct the configuration of mode 0~3 using new config in the TRM
- Split the workaround for DMA in mode 0/2 out of normal config, to make it clear.
- Update timing and speed document for the SPI slave.

Resolves https://github.com/espressif/esp-idf/issues/1346, https://github.com/espressif/esp-idf/issues/2393
2019-01-26 00:10:41 +08:00
michael
d9c5016e08 test: add new test framework for different configurations
Paremeterized Test Framework
-----------------------------

The SPI has a lot of parameters, which works in the same process.
This framework provides a way to easily test different parameter sets.
The framework can work in two different ways:

- local test: which requires only one board to perform the test - master
& slave test: which generates two sub test items which uses the same
config set to cooperate to perform the test.

The user defines a (pair if master/slave) set of init/deinit/loop
functions. Then the test framework will call init once, then call loop
several times with different configurations, then call deinit.

Then a unit test can be appended by add a parameter group, and pass it into
a macro.
2019-01-26 00:10:41 +08:00
Wangjialin
d518a19d95 driver(ledc): fix ledc fade API and update the register header file
1. fix error when fading is too fast
2. fix error when setting duty and update immediately
3. update register header file to be in accord with TRM

closes https://github.com/espressif/esp-idf/issues/2903
2019-01-12 00:56:38 +08:00
kooho
919a36b6b5 driver(gpio): fixed digital gpio unable hold bug during deep-sleep. 2018-12-18 17:04:12 +08:00
Paul Abbott
be567d3eb5 driver(rmt): Fixed some RMT related issues.
1. Add missing get function to RMT API: rmt_get_idle_level().
2. Suppress error message from rmt_wait_tx_done() if wait_time==0 (allows for polling).
3. Remove the blank lines between parameter lists.

Merges https://github.com/espressif/esp-idf/pull/2666
2018-12-18 13:32:39 +08:00
kooho
e22c0cce45 driver(timer_group): fixed bug that init hw_timer caused cresh after system soft reset
closes https://github.com/espressif/esp-idf/issues/2756
2018-12-18 13:10:15 +08:00
Anton Maklakov
81bf07ed4d test: Fix some unused identifier warnings 2018-12-10 12:34:16 +08:00
Jeroen Domburg
d6ee27e313 Merge branch 'feat/spi_check_length_buffer' into 'master'
spi: add checks for slave buffer valid and master length

See merge request idf/esp-idf!3744
2018-12-04 11:48:32 +08:00
Wangjialin
924daf7b84 bugfix(i2c): reduce speed of I2C master bus reset routine and release SDA
closes https://github.com/espressif/esp-idf/issues/2494
closes https://github.com/espressif/esp-idf/pull/2493
closes https://github.com/espressif/esp-idf/pull/2496

1. Change bus reset to handle interrupted READ sequences.
2. Slow down I2C to 100khz during reset
3. If a SLAVE device was in a read operation when the bus was interrupted, the SLAVE device is controlling SDA.The only bit during the 9 clock cycles of a byte READ the MASTER(ESP32) is guaranteed control over, is during the ACK bit period.
If the SLAVE is sending a stream of ZERO bytes, it will only release SDA during the ACK bit period. The master(ESP32) cannot generate a STOP unless SDA is HIGH. So, this reset code synchronizes the bit stream with, Either, the ACK bit, Or a 1 bit.
2018-11-30 10:08:28 +08:00
chuck todd
e55f9c1e98 1. Slow down I2C to 100khz During Reset
I am stealing this delay coding from @jeremyherbert #2493 pr.

2. Change Bus Reset to handle interrupted READ sequences.

The current code does not handle interrupted READ cycles.

 If a SLAVE device was in a read operation when the bus was interrupted, the SLAVE device is controlling SDA.

The only bit during the 9 clock cycles of a byte READ the MASTER(ESP32) is guaranteed control over, is during the ACK bit period.

If the SLAVE is sending a stream of ZERO bytes, it will only release SDA during the ACK bit period. The master(ESP32) cannot generate a STOP unless SDA is HIGH.

So, this reset code synchronizes the bit stream with, Either, the ACK bit, Or a 1 bit.

3. fix typo

correct `sda_id` to `sda_io` in `i2c_master_clear_bus()` @ryan-ma found it.  This typo was generated when I manually edited this patch on GitHub, I should have done a Copy/Paste operation!
2018-11-30 10:08:28 +08:00
jeremy
34c1d25c7f reduce speed of i2c master bus reset routine and release sda 2018-11-30 10:08:28 +08:00
morris
2b165f99c4 i2c_tool: add i2c_tool example test
1. add example test for i2c-tools
2. make command line arguments number configurable
2018-11-30 10:08:28 +08:00
houchenyao
147447b13e test: components/driver: i2c case 2018-11-29 18:27:58 +08:00
He Yin Ling
add7c49a26 Merge branch 'test/driver_i2s' into 'master'
component/driver:add i2s case

See merge request idf/esp-idf!2117
2018-11-29 14:41:09 +08:00
Wang Jia Lin
62cc522f36 Merge branch 'feature/rmt_add_api_get_free_channel' into 'master'
feature(rmt):   Add API get rmt channel's status.

See merge request idf/esp-idf!2440
2018-11-29 11:59:39 +08:00
houchenyao
44fdca94e9 test: components/driver: i2s case 2018-11-29 11:32:40 +08:00
Wang Jia Lin
cc5673435b Merge branch 'bugfix/fix_uart_read_bug_when_using_dual_core' into 'master'
bugfix(uart): fix uart read error bug when using dual core.

See merge request idf/esp-idf!3521
2018-11-28 16:17:13 +08:00
kooho
da223fad4e driver(rmt): Add API get rmt channel's status.
closes https://github.com/espressif/esp-idf/issues/1175
closes https://github.com/espressif/esp-idf/issues/2599
closes https://github.com/espressif/esp-idf/issues/2452
2018-11-28 07:20:45 +00:00
He Yin Ling
19910c8729 Merge branch 'test/driver_mcpwm' into 'master'
test/mcpwm_case

See merge request idf/esp-idf!1831
2018-11-28 13:56:05 +08:00
Wang Jia Lin
70554e8caa Merge branch 'doc/uart_lightsleep_wakeup_doc' into 'master'
doc(uart):  update the comment of uart_set_wakeup_threshold

See merge request idf/esp-idf!3556
2018-11-28 11:35:56 +08:00
houchenyao
11faab2c5d test: components/driver: pwm case 2018-11-28 10:42:32 +08:00
kooho
a9c1124763 driver(uart): fixed uart read error bug when using dual core.
closes https://github.com/espressif/esp-idf/issues/2204
2018-11-27 20:53:26 +08:00
Wangjialin
4b34ae1258 bugfix(i2s): allow to use apll in pdm/adc/dac mode
1. Allow to use apll in pdm mode
2. Add clock frequency configuration for PDM mode
3. Allow to use apll in ADC/DAC mode
2018-11-27 18:41:20 +08:00
michael
cfba157fdd spi_slave: add valid check for DMA buffers
The DMA cannot receive data correctly when the buffer address is not
WORD aligned. Currently we only check whether the buffer is in the DRAM
region.

The DMA always write in WORDs, so the length arguments should also be
multiples of 32 bits.

A check is added to see whether the buffer is WORD aligned and has valid
length.
2018-11-26 03:49:26 +00:00
michael
435adaa22a spi_master: add check for trans len
The driver decide whether use MOSI/MISO phases according to the buffer
address together with the SPI_TRANS_USE_*DATA. However someone may assue
that these phases will be skipped when the ``length``/``rxlength`` is
set to 0. In fact it is a feature that ``rxlength`` is allowed to be
set to 0 when tx and rx have the same length, and the driver fill the
``rxlength`` to ``length``.

An error check is added when the rxlength is 0 but there is data to be
sent.
2018-11-26 03:49:26 +00:00
Mahavir Jain
765bf674d0 i2s: add (optional) support to clear tx descriptor in underflow case
It has been observed that, in case of underflow (data unavailability) in
I2S transmission, previously filled up tx descriptors continue to get
transmitted on line, causing noise in case of audio use case.

This change adds optional `tx_desc_auto_clear` field during I2S driver intialization
than can zero initialize tx descriptor in case of underflow situation in
interrupt handler itself.

Closes: https://github.com/espressif/esp-idf/issues/1789
2018-11-23 14:31:09 +05:30
kooho
33138a3dec driver(i2c): enable I2C master hardware filter by default. 2018-11-23 10:27:59 +08:00
Michael (XIAO Xufeng)
8cddfa35b8 spi: fix the crash when callbacks are not in the IRAM
Introduced in 9c23b8e5 and 4f87a62f. To get higher speed, menuconfig
options are added to put ISR and other functions into the IRAM.  The
interrupt flag ESP_INTR_FLAG_IRAM is also mistakenly set when the ISR is
put into the IRAM. However callbacks, which are wrote by the user, are
called in the master and slave ISR. The user may not be aware of that
these callbacks are not disabled during flash operations. Any cache miss
during flash operation will cause panic.

Essentially IRAM functions and intrrupt flag ESP_INTR_FLAG_IRAM are
different, the latter means not disabling the ISR during flash
operations.  New bus_config flag intr_flags is offered to help set the
interrupt attribute, including priority level, SHARED, IRAM (not
disabled during flash operations).  It introduced a small BREAK to
IDFv3.1 (but the same as IDFv3.0) that the user has to manually set IRAM
flag now (therefore he's aware of the IRAM thing) to void the ISR being
disabled during flash operations.
2018-11-20 13:07:13 +08:00
Ivan Grokhotkov
a46b884a14 Merge branch 'feature/unit_test_example' into 'master'
Move Unity into components, add unit test example

See merge request idf/esp-idf!3562
2018-11-19 18:35:54 +08:00
Ivan Grokhotkov
6091021e83 unity: separate common and IDF specific functionality
New unity component can be used for testing other applications.
Upstream version of Unity is included as a submodule.
Utilities specific to ESP-IDF unit tests (partitions, leak checking
setup/teardown functions, etc) are kept only in unit-test-app.
Kconfig options are added to allow disabling certain Unity features.
2018-11-19 12:36:31 +08:00
michael
26626dfbf2 spi: add documents explicitly showing the executing core of the ISR
It is an ESP specific FreeRTOS feature that the ISR is always executed
on the core which calls the interrupt register function. In the SPI
driver, the function is always called in the bus initialization
function.

Hence, the ISR will be executed on the core which initialize the driver.

If the core is starved due to higher priority ISRs, or the interrupt is
disabled on the core (spinlock called, etc.), the ISR will not get
executed and SPI transactions will not be handled.

(MINOR CHANGE)

Resolves https://github.com/espressif/esp-idf/issues/2432.
2018-11-13 11:49:31 +08:00
michael
a52ab8ca87 spi_master: modify the error msg a little when over freq limit
The MISO signal will be delayed if the GPIO matrix is enabled.
However, delay also comes from the slave.

Previous code only considers the former case, and assume the frequency
limitations is only violated when GPIO matrix is used.

Now we are able to calculate the freq limit when extenal MISO delay is
given (feature introduced in 9c6c6ec34ab0641ace89aeb9b1a133eb6fae1a18).
The frequency limit is lower when the external MISO delay is large, and
the limit is likely to be violated even with IOMUX.

Resolves https://github.com/espressif/esp-idf/issues/2690.
2018-11-13 11:49:31 +08:00
Ivan Grokhotkov
621e316725 Merge branch 'feat/psram_support_hspi' into 'master'
esp32: support to use hspi to output clock for 4M psram

See merge request idf/esp-idf!3377
2018-11-06 20:34:41 +08:00
kooho
ea963c480c driver(uart):update the comment of uart_set_wakeup_threshold
closes https://github.com/espressif/esp-idf/issues/2627
2018-11-05 13:09:12 +08:00
Konstantin Kondrashov
8bba348528 aes/sha/mpi: Bugfix a use of shared registers.
This commit resolves a blocking in esp_aes_block function.

Introduce:
The problem was in the fact that AES is switched off at the moment when he should give out the processed data. But because of the disabled, the operation can not be completed successfully, there is an infinite hang. The reason for this behavior is that the registers for controlling the inclusion of AES, SHA, MPI have shared registers and they were not protected from sharing.

Fix some related issue with shared using of AES SHA RSA accelerators.

Closes: https://github.com/espressif/esp-idf/issues/2295#issuecomment-432898137
2018-11-05 04:22:47 +00:00
Michael (XIAO Xufeng)
9b5d0f3322 spi: shown owner of spi host explicitly 2018-10-29 20:22:44 +08:00
Michael (XIAO Xufeng)
90d229eb6d spi_master: speed up polling performance by putting into IRAM 2018-10-25 12:31:45 +08:00
Michael (XIAO Xufeng)
d0361a32d7 test: fix the IRAM type conflict issue using heap_caps_malloc 2018-10-25 12:31:44 +08:00
Angus Gratton
38bd836d05 Merge branch 'feature/cmake-unit-test' into 'master'
cmake: add unit tests build support

See merge request idf/esp-idf!3003
2018-10-22 16:29:15 +08:00
Anton Maklakov
e3fce506b8 test_spi_slave: fix warnings about unused identifiers 2018-10-21 15:11:45 +08:00
Renz Bagaporo
cc774111bf cmake: Add support for test build 2018-10-20 12:07:24 +08:00
Ivan Grokhotkov
0663ab7609 Merge branch 'feature/uart_rs485_test' into 'master'
driver: rs485 test support

See merge request idf/esp-idf!2701
2018-10-19 13:05:55 +08:00
Angus Gratton
159ff6e08e unit tests: Only initialise tcpip_adapter() when needed by the test
Prevents unexpected memory allocations when running tests which
don't require tcpip_adapter.
2018-10-17 22:53:46 +00:00
Alex Lisitsyn
5b7b64b946 driver: rs485 test support (remove timeout tag)
Adds test functionality with TEST_CASE_MULTIPLE_DEVICES() macro for RS485 test support.
2018-10-17 12:47:12 +02:00
Alex Lisitsyn
61bc733791 driver: rs485 test support
Adds test functionality with TEST_CASE_MULTIPLE_DEVICES() macro for RS485 test support.
2018-10-17 12:45:56 +02:00
Krzysztof Budzynski
cd5f8bcf74 MCPWM API doc update 2018-10-10 08:15:23 +08:00
Angus Gratton
05c510b44e Merge branch 'test/spi_slave_psram_disable' into 'master'
test: disable the spi slave startup test when psram is enabled

See merge request idf/esp-idf!3373
2018-10-08 16:28:41 +08:00
michael
6b180f70ac test: modify the command/address test a bit to test the LSBFIRST feature 2018-10-04 15:03:26 +08:00
michael
e5ed450d95 spi: move gpio direction config to common func for coinsistence
(MINOR CHANGE)
2018-10-04 14:57:31 +08:00
Michael (XIAO Xufeng)
2600f43822 spi_master: fix the command and address field when LSB_FIRST enabled
Resolves https://github.com/espressif/esp-idf/issues/2444.
2018-10-04 14:57:30 +08:00
michael
f4d4183000 test: disable the spi slave startup test when psram is enabled 2018-09-26 17:55:37 +08:00
michael
d4071a7c19 sdio_slave: fix the ret_queue crash issue when being reset by the master 2018-09-25 20:30:25 +08:00
Michael (Xiao Xufeng)
4af51833f3 spi_master: add new polling mode to decrease time cost each transaction 2018-09-20 19:46:46 +08:00
Mahavir Jain
152043d469 esp_ringbuf: move ringbuf to seperate component
Signed-off-by: Mahavir Jain <mahavir@espressif.com>
2018-09-17 17:04:57 +05:30
Angus Gratton
62c3218981 Merge branch 'fix/spi_slave_free_cs' into 'master'
spi_slave: fix the issue rx dma get broken by master unexpected transaction

See merge request idf/esp-idf!3207
2018-09-13 13:50:56 +08:00
Angus Gratton
500ee99219 Merge branch 'bugfix/fix_mcpwm_api_mismatch_bug' into 'master'
driver(mcpwm): Fix  some mcpwm related bug

See merge request idf/esp-idf!2510
2018-09-12 14:59:02 +08:00
Renz Christian Bagaporo
d9939cedd9 cmake: make main a component again 2018-09-11 09:44:12 +08:00
michael
8f88a81f30 sdio_slave: fix the recv crash when trans finish and load at the same time 2018-09-10 13:06:54 +08:00
He Yin Ling
6f5820814f Merge branch 'test/driver_case_review' into 'master'
Test/driver case review

See merge request idf/esp-idf!3206
2018-09-07 16:48:59 +08:00
Angus Gratton
4eeed31a04 Merge branch 'feature/cmake' into 'master'
Merge experimental CMake support to master

See merge request idf/esp-idf!3024
2018-09-07 13:44:17 +08:00
michael
2d748b5d38 spi_slave: fix the issue rx dma get broken by master unexpected transaction 2018-09-07 12:04:55 +08:00
houchenyao
0cfed0b79b rmt test: add the case for bug in github[#1815] 2018-09-06 19:43:30 +08:00
houchenyao
47fcdeaa0b rmt test: add case test test the bug of re-install problem
add pending bug case:rmt_tx_stop function cause the re-install fail when rmt_config_t.tx_config.loop_en==true
2018-09-06 19:43:30 +08:00
houchenyao
09dd1034de rmt test: add case to check memory block.
add RMT channel num and memory block relationship test case to check the memory block range is used in right way.
2018-09-06 19:43:30 +08:00
houchenyao
836d01dcea ledc test: ignore one case.
a bug caused by pcnt. it will fail randomly caused by PCNT bug. It will open when PCNT problem is resolved
2018-09-06 19:43:30 +08:00
houchenyao
f647ea81cc pcnt test: ignore pcnt two test cases
a bug caused by pcnt. these two cases has about 10% fail ratio. they fail randomly in CI. stress test needed. they are ignored until this bug fixed.
2018-09-06 19:42:20 +08:00
houchenyao
22ac8cf424 ledc test: test low speed mode frequency.
remove the comment to test the scenario that ledc in low speed mode frequency can be changed, to make sure the bug has been resolved
2018-09-06 17:44:39 +08:00
houchenyao
98c868ff09 gpio test: add GPIO multi-level interrupt test
add case to test the bug of v3.0. If we trigger the level interrupt more than once, will cause the interrupt be triggered many times
2018-09-06 17:43:23 +08:00
Ivan Grokhotkov
002d913ab6 uart: add function to set light sleep wakeup threshold 2018-09-06 15:40:46 +08:00
Ivan Grokhotkov
1c5522575e driver/gpio: support wakeup function for RTC IOs 2018-09-06 15:40:46 +08:00
Angus Gratton
b355854d4d Merge branch 'master' into feature/cmake 2018-09-05 10:35:04 +08:00
Ivan Grokhotkov
97b2281c49 Merge branch 'bugfix/can_driver_multiple_bugs' into 'master'
CAN: Add pm_lock, fix gpio bug, update docs

See merge request idf/esp-idf!3138
2018-09-04 20:34:06 +08:00
Darian Leung
dc3fa14a26 CAN: Add pm_lock, fix gpio bug, update docs
This commit does the following

- Add power management lock to CAN driver so that APB frequency does not change
whilst CAN driver is in use
- Fix incorrect flag in can_transmit()
- Refactor can_driver_install() and can_driver_uninstall() so that critical sections
are shorter
- Fix CAN gpio configuration bug on RX pin. Closes #2302
- Add docs about multiple ID configuration and fix example links
2018-09-01 02:46:05 +08:00
Angus Gratton
5fbfd20f10 Merge branch 'master' into feature/cmake 2018-08-30 18:52:31 +08:00
Angus Gratton
a9c4ed7139 Merge branch 'master' into feature/cmake 2018-08-30 18:51:01 +08:00
Ivan Grokhotkov
78fab8a0f9 sdmmc: implement partial DDR support
Works for 3.3V eMMC in 4 line mode.
Not implemented:
- DDR mode for SD cards (UHS-I) also need voltage to be switched to 1.8V.
- 8-line DDR mode for eMMC to be implemented later.
2018-08-30 13:11:54 +08:00
Ivan Grokhotkov
de42d99b1d sdmmc: command layer refactoring 2018-08-30 13:11:54 +08:00
sergiu2014
383464749a eMMC/MMC support for ESP32
Merges https://github.com/espressif/esp-idf/pull/1941
Previous work in https://github.com/espressif/esp-idf/pull/590
2018-08-30 11:36:28 +08:00
Ivan Grokhotkov
80e47a005d sdmmc host: minor cleanup
Code style, comments
2018-08-30 11:36:28 +08:00
Ivan Grokhotkov
9ba5896d86 driver, ethernet: fix non-static inline functions
See https://gcc.gnu.org/bugzilla/show_bug.cgi?id=81734
2018-08-29 12:49:15 +08:00
Ivan Grokhotkov
fc0c110efd driver: test: fix memset out of bounds in spi_master test 2018-08-29 12:49:15 +08:00
Michael (XIAO Xufeng)
4f87a62f18 spi_slave: add new menuconfig item to decide whether spi slave should be put into IRAM 2018-08-23 05:21:49 +00:00
Michael (XIAO Xufeng)
e3557b57be spi: fix the issue that spi cannot be used when flash is disabled
The dma configuration function called in the ISR should be put into the IRAM.

Fixes https://github.com/espressif/esp-idf/issues/2307.
2018-08-23 05:21:49 +00:00
Jeroen Domburg
4eb28b9ace Merge branch 'feature/spi_burst_desc' into 'master'
spi_master: change to DMA burst mode when access descriptors

See merge request idf/esp-idf!2824
2018-08-21 16:54:38 +08:00
michael
404e99965d spi_master: change high part config to allow transactions of 64 bytes 2018-08-16 18:55:09 +08:00
Angus Gratton
ff2404a272 Merge branch 'master' into feature/cmake 2018-08-16 17:14:17 +10:00
Ivan Grokhotkov
8739111218 Merge branch 'bugfix/gpio_reset_bitmask' into 'master'
gpio: Bitmask overflow fix in gpio_reset_pin

See merge request idf/esp-idf!2966
2018-08-10 17:35:26 +08:00
Michael (XIAO Xufeng)
203ceed1e7 spi_master: change to DMA burst mode when access descriptors 2018-08-08 13:56:01 +00:00
Taavi Hein
f7749e18a8 gpio: Bitmask overflow fix in gpio_reset_pin
For pins 32 and up the BIT(nr) macro used here overflowed,
causing undetermined GPIO pins to be reset.
Example: freeing SPI device/bus where CS is on pin 33
caused debug UART to cease communication, TXD0 was
disabled.

Fixed as BIT64(nr) macro, to be used elsewhere as needed.
For example in definitions like GPIO_SEL_32..GPIO_SEL_39.
2018-08-08 15:31:17 +03:00
Angus Gratton
a53a5eeabd Merge branch 'bugfix/add_mutex_for_some_touchpad_apis' into 'master'
fix(touch): add_mutex_for_some_touchpad_apis

See merge request idf/esp-idf!2714
2018-08-08 16:28:28 +08:00
Angus Gratton
5f56f2ca01 Merge branch 'feature/nvs_version_check' into 'master'
nvs_flash: Version compatibility check for nvs storage

See merge request idf/esp-idf!2855
2018-08-07 13:31:49 +08:00
kooho
2d0af81ccf driver(uart): Fixed uart tx_empty interrupt wdt timeout bug. 2018-08-05 06:34:34 +00:00
Sagar Bijwe
1df85e0039 nvs_flash: Version compatibility check for nvs storage
This change adds a check for compatibility between the nvs version
found on nvs flash and the one assumed by running code during nvs
initialization. Any mismatch is reported to the user using new error
code ESP_ERR_NVS_NEW_VERSION_FOUND.
2018-08-05 00:00:56 +00:00
Angus Gratton
3c5af26506 Merge branch 'test/spi_region' into 'master'
spi_master: improve some tests

See merge request idf/esp-idf!2809
2018-08-02 12:09:44 +08:00
fuzhibo
81c762eb86 fix(touch): add_mutex_for_some_touchpad_apis 2018-08-01 18:06:21 +08:00
Michael (XIAO Xufeng)
0aa52057ed spi_master: enable 2 tests in CI
The test is previously disabled for the requirement of external
connection. Now the signals are connected by internal connections.
Also change the failure logic of the test.
2018-07-31 18:04:51 +08:00
Michael (XIAO Xufeng)
fb15f970d2 spi_master: change test to test DMA tx/rx in regions like psram 2018-07-31 18:04:50 +08:00
Mahavir Jain
02ddb7302e wpa_supplicant: removed unrequired header dir include from component.mk
- Also fixed license header in rtc driver

Signed-off-by: Mahavir Jain <mahavir@espressif.com>
2018-07-30 11:17:11 +05:30
Ivan Grokhotkov
caeab09f65 Merge branch 'bugfix/src_encoding' into 'master'
Correct source code encoding

See merge request idf/esp-idf!2820
2018-07-24 22:03:46 +08:00
Ivan Grokhotkov
d50c03cc7d Merge branch 'bugfix/unit-test-build-fix' into 'master'
unit-test-app: don’t include project.mk for ut- targets

See merge request idf/esp-idf!2619
2018-07-24 20:48:12 +08:00
Ivan Grokhotkov
f3260cc30f test/uart: fix compilation warning 2018-07-24 09:56:40 +03:00
Ivan Grokhotkov
253930acd1 spi_master, ulp: fix aliasing errors in unit tests 2018-07-24 09:54:55 +03:00
kooho
01516abe5a Add some comments in pcnt.h. 2018-07-24 10:33:58 +08:00
Ivan Grokhotkov
baa4613fc1 Merge branch 'bugfix/fix_touchpad_wakeup_status' into 'master'
fix(sleep): swap touchpad num in wakeup status

See merge request idf/esp-idf!2708
2018-07-24 04:08:43 +08:00
Roland Dobai
0efb4a11ec Correct source code encoding 2018-07-19 14:00:44 +02:00
Wang Jia Lin
de907e8801 Merge branch 'bugfix/rmt_mem_num_maximum_limit_is_not_accurate' into 'master'
bugfix(rmt): Modify the rmt_mem_num maximum limit value from 15 to 8.

See merge request idf/esp-idf!2734
2018-07-18 16:15:14 +08:00
Ivan Grokhotkov
c46b8178f2 Merge branch 'bugfix/sdmmc_auto_stop_cmd' into 'master'
sdmmc: enable host auto_stop only for certain commands

See merge request idf/esp-idf!2710
2018-07-18 14:55:45 +08:00
fuzhibo
54a67d92a4 fix(sleep): swap touchpad num in wakeup status 2018-07-17 20:25:06 +08:00
Wang Jia Lin
5480a6b6e5 Merge branch 'bugfix/clear_intr_status_when_enable_intr' into 'master'
driver(gpio): fix the gpio interrupt false triggering issue

See merge request idf/esp-idf!2498
2018-07-17 15:44:00 +08:00
XiongYu
6d57757840 Modify the rmt_mem_num maximum limit value from 15 to 8. 2018-07-16 19:10:42 +08:00
hou wen xiang
e2b9b70800 driver(uart): Fix uart time_out bug when using ref_tick 2018-07-16 16:56:14 +08:00
Angus Gratton
e5d2406b1d Merge branch 'bugfix/spi_cs_setup_fulldup' into 'master'
fix(spi_master): allow to use cs_ena_pretrans in full duplex mode without…

See merge request idf/esp-idf!2576
2018-07-16 16:30:36 +08:00
Jiang Jiang Jian
8809fabcd5 Merge branch 'bugfix/ledc_duty_and_freq' into 'master'
bugfix(ledc): fix bugs reported from unit-test and github.

See merge request idf/esp-idf!2735
2018-07-16 12:12:48 +08:00
Angus Gratton
2ae758ebcb Merge branch 'bugfix/spi_sdio_sdkconfig_include' into 'master'
sdio_example/spi: fix sdkconfig include issue

See merge request idf/esp-idf!2756
2018-07-16 08:00:15 +08:00
Ivan Grokhotkov
b354770f42 Merge branch 'bugfix/fixes_from_github' into 'master'
Fixes from Github

See merge request idf/esp-idf!2730
2018-07-13 15:03:50 +08:00
Ivan Grokhotkov
6d46eed8e4 sdmmc: enable host auto_stop only for certain commands
Perviously host send_auto_stop flag would be set for every data
transfer over 1 block long. This caused stop commands to be sent
after CMD53, which shouldn't be done. Fix by adding an explicit list
of commands for which send_auto_stop should be set.
2018-07-13 03:28:10 +00:00
hou wen xiang
5402ace528 driver(gpio) : Fixed the gpio related bug for release v3.1. 2018-07-12 20:19:02 +08:00
Angus Gratton
a67d5d89e0 Replace all DOS line endings with Unix
Command run was:
git ls-tree -r HEAD --name-only | xargs dos2unix
2018-07-12 19:10:37 +08:00
Michael (XIAO Xufeng)
95dbfbe4c0 sdio_example/spi: fix sdkconfig include issue
(MINOR CHANGES)
2018-07-12 15:59:16 +08:00
Angus Gratton
04caff2fb2 Merge branch 'fix/sdio_speed_4bit' into 'master'
fix(sdio): update sdio to better run in 4bit HS mode

See merge request idf/esp-idf!2704
2018-07-12 08:54:03 +08:00
Darian Leung
882b50dd8c driver: Fix memory leak in rtc_isr_deregister()
Closes #2179
2018-07-11 21:34:09 +08:00
Wangjialin
ab44c6ecc2 bugfix(ledc): fix bugs reported from unit-test and github.
1. In ledc_set_duty_and_update, return if duty updated. Close https://github.com/espressif/esp-idf/issues/2082
2. fix ledc_set_freq function for low speed mode.
2018-07-10 02:22:23 +08:00
Anton Maklakov
27311811e0 Merge branch 'bugfix/gcc8_complation_errors' into 'master'
Warnings and errors detected by GCC8

See merge request idf/esp-idf!2703
2018-07-09 22:55:52 +08:00
Alexey Gerenkov
c2dc09304c gcc8_newlib3: Compilation warnings and errors not specific to newlib v3 2018-07-09 13:22:24 +03:00
Le-Andrew
a8da9c1b96 Fixed typos on booleans.
Merges https://github.com/espressif/esp-idf/pull/2067
2018-07-09 14:36:06 +08:00
michael
c34672e7dc fix(sdmmc): disable all pulldowns used by sdmmc host 2018-07-06 18:17:51 +08:00
michael
597eda5f0b fix(sdio_slave): improve sdio slave for high speed and 4 bit mode 2018-07-06 18:17:50 +08:00
michael
823ebba0f0 fix(sdio_slave): fix minor issues like return value of send function, output arg, etc. 2018-07-06 18:17:49 +08:00
Darian Leung
1d2727f4c8 CAN Driver
The following commit contains the first version of the ESP32 CAN Driver.

closes #544
2018-07-04 14:01:57 +08:00
Alex Lisitsyn
9ba0808228 driver: fix rs485 test 2018-07-03 13:26:28 +02:00
Angus Gratton
909eec9c3b Merge branch 'feature/uart_add_rs485_interface_support' into 'master'
driver: add rs485 half duplex interface support to uart driver

See merge request idf/esp-idf!2415
2018-07-03 14:34:33 +08:00
Alex Lisitsyn
a9fca0c775 driver: add rs485 half duplex interface support to uart driver (fix after review)
An existing UART driver does not support RS485 half duplex mode.
This task adds this functionality to ESP_IDF UART driver.
driver/uart.c/h: updated to add support of RS485 half duplex mode
examples/peripherals/uart_echo_rs485/main/rs485_example.c: added test example
components/driver/test/test_uart.c: added test of RS485 half duplex mode
docs/en/api-reference/peripherals/uart.rst: updated documentation
test_uart.c: suppress GCC warnings about discarded const qualifiers
uart.rst: remove sphinx warning - "Duplicate explicit target name"
simple change in uart.h file
update (test_uart.c) after rebase from master
update uart.rst, uart.c, rs485_example.c
Update example description in file Readme.md
update uart.c/h, uart.rst, test_uart.c according to review results
update uart.h (uart_set_rx_timeout() description
test_uart.c remove ignore tag
uart.c/h: fix param errors
test_uart.c: Remove GCC warning supress
uart.rst: fix the notes
rs485_example.c: fix output
uart.c: remove reset using UART_RXFIFO_RST from driver.
readme.md: Update example description

The tests are completed using RS485 adapters hardware connected to two ESP32 WROVER KITs.

TW#13812
Closes https://github.com/espressif/esp-idf/pull/667
Closes https://github.com/espressif/esp-idf/pull/1006
2018-07-02 15:24:58 +02:00
Alex Lisitsyn
a952eb1a92 driver: add rs485 half duplex interface support to uart driver (fix indentation after review)
An existing UART driver does not support RS485 half duplex mode.
This task adds this functionality to ESP_IDF UART driver.
driver/uart.c/h: updated to add support of RS485 half duplex mode
examples/peripherals/uart_echo_rs485/main/rs485_example.c: added test example
components/driver/test/test_uart.c: added test of RS485 half duplex mode
docs/en/api-reference/peripherals/uart.rst: updated documentation
test_uart.c: suppress GCC warnings about discarded const qualifiers
uart.rst: remove sphinx warning - "Duplicate explicit target name"
simple change in uart.h file
update (test_uart.c) after rebase from master
update uart.rst, uart.c, rs485_example.c
Update example description in file Readme.md
update uart.c/h, uart.rst, test_uart.c according to review results
update uart.h (uart_set_rx_timeout() description
test_uart.c remove ignore tag
uart.c/h: fix param errors
test_uart.c: Remove GCC warning supress
uart.rst: fix the notes
rs485_example.c: fix output

The tests are completed using RS485 adapters hardware connected to two ESP32 WROVER KITs.

TW#13812
Closes https://github.com/espressif/esp-idf/pull/667
Closes https://github.com/espressif/esp-idf/pull/1006
2018-07-02 15:24:58 +02:00
Alex Lisitsyn
ef5dc73f6f driver: add rs485 half duplex interface support to uart driver (update after review)
An existing UART driver does not support RS485 half duplex mode.
This task adds this functionality to ESP_IDF UART driver.
driver/uart.c/h: updated to add support of RS485 half duplex mode
examples/peripherals/uart_echo_rs485/main/rs485_example.c: added test example
components/driver/test/test_uart.c: added test of RS485 half duplex mode
docs/en/api-reference/peripherals/uart.rst: updated documentation
test_uart.c: suppress GCC warnings about discarded const qualifiers
uart.rst: remove sphinx warning - "Duplicate explicit target name"
simple change in uart.h file
update (test_uart.c) after rebase from master
update uart.rst, uart.c, rs485_example.c
Update example description in file Readme.md
update uart.c/h, uart.rst, test_uart.c according to review results
update uart.h (uart_set_rx_timeout() description
test_uart.c remove ignore tag
uart.c/h: fix param errors
test_uart.c: Remove GCC warning supress
uart.rst: fix the notes
rs485_example.c: fix output

The tests are completed using RS485 adapters hardware connected to two ESP32 WROVER KITs.

TW#13812
Closes https://github.com/espressif/esp-idf/pull/667
Closes https://github.com/espressif/esp-idf/pull/1006
2018-07-02 15:24:58 +02:00
Alex Lisitsyn
d096b3abb8 driver: add rs485 half duplex interface support to uart driver (remove ignore tag to check ut case)
An existing UART driver does not support RS485 half duplex mode.
This task adds this functionality to ESP_IDF UART driver.
driver/uart.c/h: updated to add support of RS485 half duplex mode
examples/peripherals/uart_echo_rs485/main/rs485_example.c: added test example
components/driver/test/test_uart.c: added test of RS485 half duplex mode
docs/en/api-reference/peripherals/uart.rst: updated documentation
test_uart.c: suppress GCC warnings about discarded const qualifiers
uart.rst: remove sphinx warning - "Duplicate explicit target name"
simple change in uart.h file
update (test_uart.c) after rebase from master
update uart.rst, uart.c, rs485_example.c
Update example description in file Readme.md
update uart.c/h, uart.rst, test_uart.c according to review results
update uart.h (uart_set_rx_timeout() description
test_uart.c remove ignore tag

The tests are completed using RS485 adapters hardware connected to two ESP32 WROVER KITs.

TW#13812
Closes https://github.com/espressif/esp-idf/pull/667
Closes https://github.com/espressif/esp-idf/pull/1006
2018-07-02 15:24:58 +02:00
Alex Lisitsyn
b76693fe20 driver: add rs485 half duplex interface support to uart driver (update after review)
An existing UART driver does not support RS485 half duplex mode.
This task adds this functionality to ESP_IDF UART driver.
driver/uart.c/h: updated to add support of RS485 half duplex mode
examples/peripherals/uart_echo_rs485/main/rs485_example.c: added test example
components/driver/test/test_uart.c: added test of RS485 half duplex mode
docs/en/api-reference/peripherals/uart.rst: updated documentation
test_uart.c: suppress GCC warnings about discarded const qualifiers
uart.rst: remove sphinx warning - "Duplicate explicit target name"
simple change in uart.h file
update (test_uart.c) after rebase from master
update uart.rst, uart.c, rs485_example.c
Update example description in file Readme.md
update uart.c/h, uart.rst, test_uart.c according to review results
update uart.h (uart_set_rx_timeout() description

The tests are completed using RS485 adapters hardware connected to two ESP32 WROVER KITs.

TW#13812
Closes https://github.com/espressif/esp-idf/pull/667
Closes https://github.com/espressif/esp-idf/pull/1006
2018-07-02 15:24:58 +02:00
Alex Lisitsyn
51e9cf6848 driver: add rs485 half duplex interface support to uart driver (update after review)
An existing UART driver does not support RS485 half duplex mode.
This task adds this functionality to ESP_IDF UART driver.
driver/uart.c/h: updated to add support of RS485 half duplex mode
examples/peripherals/uart_echo_rs485/main/rs485_example.c: added test example
components/driver/test/test_uart.c: added test of RS485 half duplex mode
docs/en/api-reference/peripherals/uart.rst: updated documentation
test_uart.c: suppress GCC warnings about discarded const qualifiers
uart.rst: remove sphinx warning - "Duplicate explicit target name"
simple change in uart.h file
update (test_uart.c) after rebase from master
update uart.rst, uart.c, rs485_example.c
Update example description in file Readme.md
update uart.c/h, uart.rst, test_uart.c according to review results

The tests are completed using RS485 adapters hardware connected to two ESP32 WROVER KITs.

TW#13812
Closes https://github.com/espressif/esp-idf/pull/667
Closes https://github.com/espressif/esp-idf/pull/1006
2018-07-02 15:24:58 +02:00
Michael (XIAO Xufeng)
3d23fe9a61 feature(spi): provide macro to write multi-byte data straightly
resolves https://github.com/espressif/esp-idf/issues/2062
2018-07-02 15:34:47 +08:00
houchenyao
1878109a7f bugfix: fix pcnt case "PCNT interrupt method test(control IO is high)" 2018-06-26 13:35:14 +08:00
michael
8676830e61 fix(spi_master): allow to use cs_ena_pretrans in full duplex mode without command and address phases 2018-06-25 04:30:14 +00:00
hou wen xiang
10e8e22558 driver(mcpwm): Fix mcpwm api in mcpwm.c mismatch with mcpwm.h bug. 2018-06-22 12:26:43 +08:00
Konstantin Kondrashov
32da455384 soc: Fix check_long_hold_gpio and move def to soc
Fix factory_reset_pin init as input
Move definition a structure rtc_gpio_desc to soc

Closes https://github.com/espressif/esp-idf/issues/2030
2018-06-22 09:20:27 +05:00
Ivan Grokhotkov
99b075b28a Merge branch 'example/sdio_example' into 'master'
example(sdio): example to use sdmmc host to do SDIO communication with SDIO slave

See merge request idf/esp-idf!1946
2018-06-21 13:55:23 +08:00
michael
8ab87a6a87 chore(sdio_slave): format source files 2018-06-20 07:00:05 +00:00
houchenyao
3238c6f968 test: components/driver: pcnt case 2018-06-20 06:00:26 +00:00
Ivan Grokhotkov
4b91c82cc4 Merge branch 'feat/sdio_pullup' into 'master'
feature(sdio): add features to make SDIO slave compatible with more devkits

See merge request idf/esp-idf!2454
2018-06-20 13:58:56 +08:00
Angus Gratton
c1fdd45001 Merge branch 'bugfix/fix_touch_pad_can_not_wake_up' into 'master'
bugfix(touch pad): modify deep-sleep example and add note for sleep api

See merge request idf/esp-idf!2553
2018-06-20 11:51:46 +08:00
fuzhibo
9a0d57b90b bugfix(touch pad): modify deep-sleep example and add note for sleep api.
Closes https://github.com/espressif/esp-idf/issues/2052
2018-06-20 10:57:26 +08:00
He Yin Ling
8956f35be5 Merge branch 'test/driver_ledc' into 'master'
test: add ledc test cases

See merge request idf/esp-idf!1782
2018-06-19 15:14:16 +08:00
Angus Gratton
73f6fb9fe7 Merge branch 'feature/spi_functions_in_iram' into 'master'
feature(spi_master): allow to place functions into IRAM to get higher efficiency

See merge request idf/esp-idf!2538
2018-06-19 07:25:12 +08:00
houchenyao
339d381019 test: components/driver: ledc case 2018-06-19 02:00:42 +08:00
Michael (XIAO Xufeng)
9c23b8e596 feature(spi_master): allow to place functions into IRAM to get higher efficiency 2018-06-14 20:22:40 +08:00
Ivan Grokhotkov
589e8db4dd Merge branch 'bugfix/spi_gpio_deinit' into 'master'
fix(spi): Fix several init/deinit issues of spi pins

See merge request idf/esp-idf!2522
2018-06-14 19:21:34 +08:00
michael
9b1f2df900 fix(sdio_slave): fix the intr_recv issue that trigger receiving too fast cause assertion failed.
also fix a race risk issue when recycle receiving buffers.
2018-06-14 12:04:23 +08:00
michael
5b37a96ddc feature(sdio): allow to enable internal pullups of the SDIO host and slave as a debug feature
NOTE: the internal pullups are not totally reliable, please do add external pullups on your bus.
2018-06-14 12:04:22 +08:00
michael
45d1c9207c bugfix(spi): resolve the glitch that happens during initialization 2018-06-14 11:29:16 +08:00
Michael (XIAO Xufeng)
77077196fd fix(spi): reset gpios that used by spi when deinited 2018-06-14 11:29:15 +08:00
Michael (XIAO Xufeng)
ebfda40b7c refactor(spi): move pin information into soc folder 2018-06-14 11:29:15 +08:00
He Yin Ling
e1a6e71486 Merge branch 'test/driver_rmt' into 'master'
test: add rmt test cases

See merge request idf/esp-idf!1797
2018-06-13 22:31:11 +08:00
He Yin Ling
a4581ff404 Merge branch 'test/driver_timer' into 'master'
test: add driver timer test cases

See merge request idf/esp-idf!1785
2018-06-13 22:28:17 +08:00
houchenyao
5c6473245f test: add driver/rmt test case 2018-06-13 18:10:09 +08:00
He Yin Ling
17200f484e Merge branch 'test/driver_sigmadelta' into 'master'
test: add sigmadelta test

See merge request idf/esp-idf!1780
2018-06-13 15:19:35 +08:00
houchenyao
de848a5150 test: driver/sigmadelta test case 2018-06-13 10:15:06 +08:00
houchenyao
0837eb4c2e test: components/driver: timer case 2018-06-13 01:39:07 +00:00
houchenyao
e5717e365f test: add driver/gpio test case 2018-06-12 19:04:30 +08:00
Mahavir Jain
eef8d0f7ed Resolve required include header dependencies in component itself
Signed-off-by: Mahavir Jain <mahavir@espressif.com>
2018-06-12 11:19:39 +05:30
Angus Gratton
87077a5478 test: Tweaks to reduce variation in CI unit tests
spi test: Prime the flash cache before each test to minimise flash cache misses.

VFS performance test: Increase the number of runs to minimise influence of an isolated bad run.
2018-06-08 14:42:44 +10:00
Michael (XIAO Xufeng)
939e5693a5 chore(spi): fix the terms of native to iomux 2018-06-06 06:08:39 +00:00
michael
75cdbcefc7 test(spi): add test for SPI timing 2018-06-06 06:08:39 +00:00
michael
208d993de1 test(spi_master): slightly modify the test 2018-06-06 06:08:39 +00:00
michael
5cf7d3768d feat(spi_master): fine tune the timing of SPI 2018-06-06 06:08:39 +00:00
Angus Gratton
6b9784cc45 Merge branch 'master' into feature/cmake_update 2018-05-31 14:46:23 +10:00
Angus Gratton
c9f8470fdf Merge branch 'feature/rmt_translator' into 'master'
driver(rmt): Add API supports sending uint8_t type data

See merge request idf/esp-idf!1975
2018-05-23 07:27:14 +08:00
Angus Gratton
75c27202f7 Merge branch 'feature/update_touchpad_filter_process' into 'master'
driver(touchpad): Change the measuring mode, improve the software filter.

See merge request idf/esp-idf!2358
2018-05-22 09:56:55 +08:00
kooho
5bc8ae3b3a driver(rmt):Add API supports sending uint8_t type data. 2018-05-22 01:55:44 +00:00
michael
f613859e29 feat(sdio_slave): add new driver for sdio_slave 2018-05-21 23:48:47 +08:00
Angus Gratton
0c64ef9600 Merge branch 'bugfix/sdio_write_unaligned_len' into 'master'
SDIO: allow read/write operations for lengths not divisible by 4

See merge request idf/esp-idf!2278
2018-05-21 15:26:32 +08:00
Wangjialin
09181b7d94 driver(touchpad): improve touchpad filter mode and update examples. 2018-05-21 14:45:31 +08:00
Jiang Jiang Jian
35d148256b Merge branch 'bugfix/fix_uart_buffer_full_flg_error_bug' into 'master'
driver(uart): Fix the bug that uart buffer_full flag is true all the time.

See merge request idf/esp-idf!2418
2018-05-21 14:09:44 +08:00
Jiang Jiang Jian
9c53b599b2 Merge branch 'bugfix/i2c_add_xqueue_static_allocation' into 'master'
driver(i2c, rmt):  Add xQueue and xSemaphore static allocation support when intr_alloc_flag set to ESP_INTR_FLAG_IRAM.

See merge request idf/esp-idf!2335
2018-05-21 10:29:31 +08:00
Angus Gratton
03414b1f39 Merge branch 'bugfix/reset_some_peripherals_when_cpu_start' into 'master'
driver:   Reset  communication peripherals when cpu start up.

See merge request idf/esp-idf!2296
2018-05-21 09:53:42 +08:00
kooho
f6f9f93a9d driver(i2c, rmt):Add intr_flag setting to ESP_INTR_FLAG_IRAM support when enable psram. 2018-05-21 09:37:56 +08:00
wangmengyang
22e21b38f7 component/bt: implement bluetooth modem sleep mode, one mode for BLE only and another for dual mode bluetooth
1. provide options for bluetooth low power mode
2. provide two options for bluetooth low power clock: main XTAL and external 32kHz XTAL
3. provide function and callbacks to control bluetooth low power mode, including enable/disable sleep, software wakeup request, low power clock settings, check power state, etc
4. modify vhci API vhci_host_send_packet to use blocking mode
5. note that DFS and bluetooth modem sleep can not be used together currently.
2018-05-19 15:37:26 +08:00
kooho
33b99caf50 driver(uart):Fix the bug that uart buffer_full flag is true all the time. 2018-05-18 16:46:10 +08:00
kooho
ef39c09bc1 driver: reset communication peripherals when the cpu starts. 2018-05-18 14:41:58 +08:00
Roland Dobai
18e83bcd53 Allow VFS file descriptors in select() 2018-05-18 08:06:33 +02:00
Jiang Jiang Jian
cf9499479c Merge branch 'bugfix/i2s_mix_result_with_error_code_master' into 'master'
fix i2s mix result and error code

See merge request idf/esp-idf!2227
2018-05-17 21:53:06 +08:00
Jiang Jiang Jian
8c657dfee4 Merge branch 'bugfix/fix_an_error_in_comment_of_uart_driver' into 'master'
deiver(uart):revise the explanation of uart break length

See merge request idf/esp-idf!2398
2018-05-17 17:17:14 +08:00
Jiang Jiang Jian
993b8b7bf6 Merge branch 'bugfix/o3_fails' into 'master'
Fix compilation errors when -O3 is used

See merge request idf/esp-idf!2396
2018-05-17 16:48:13 +08:00
Zhang Zhao Xiang
9deb58859c fix i2s mix result and error code 2018-05-17 10:59:04 +08:00
Angus Gratton
b2e264ef52 Merge branch 'feature/ledc_add_api_set_hpoint_val' into 'master'
driver(ledc): fix duty and fade issues and add thread-safe version APIs.

See merge request idf/esp-idf!2233
2018-05-16 19:52:26 +08:00
Jiang Jiang Jian
4b4a587540 Merge branch 'bugfix/touch_change_default_enable_value' into 'master'
bugfix(touch): change the default value for sar_touch_enable register.

See merge request idf/esp-idf!1870
2018-05-16 17:40:18 +08:00
Angus Gratton
fcd5d0869d Merge branch 'bugfix/spi_native_pins' into 'master'
fix several spi issues about pin configurations

See merge request idf/esp-idf!2309
2018-05-15 14:19:20 +08:00
Angus Gratton
31d53bc059 Merge branch 'bugfix/sdspi_delayed_write_response' into 'master'
sdspi: handle delayed response to data write command

See merge request idf/esp-idf!2290
2018-05-15 10:32:21 +08:00
Jiang Jiang Jian
73d20981de Merge branch 'bugfix/rmt_tx_stop_bug' into 'master'
driver(rmt):  RMT tx stop  workaround

See merge request idf/esp-idf!1915
2018-05-15 10:04:33 +08:00
Jiang Jiang Jian
33b11c6f6a Merge branch 'feature/adjust_log_level_about_uart' into 'master'
feat: Adjust log level about UART

See merge request idf/esp-idf!2047
2018-05-15 09:59:21 +08:00
Ivan Grokhotkov
9379d7b9f9 sdmmc: wait for command done event even if data transfer is over
This fixes errors logged on the console: sdmmc_req:
handle_idle_state_events unhandled: 00000004 00000000

The issue happens if "data done" event occurs before "command done".
State machine code did not check *which* event occurred in
SENDING_CMD state, and went to IDLE or SENDING_DATA state on any
non-error event. In this case, we can't process "data done" event
until command has completed. This change introduces "unhandled event"
mask, which is carried over from one run of process_events to the
other. This allows waiting for the "command done" event to complete,
and then process "data done" event.

Ref TW17126.
2018-05-15 09:59:20 +08:00
Ivan Grokhotkov
cf81db40a2 sdio: allow reads/writes with lengths not divisible by 4
CMD53 in byte mode supports transfers of any number of bytes between 1
and 512. This change removes limitation that the number of bytes must
be divisible by 4. Host quirk, that such transfers must be split into
two commands (one for the aligned part and the other one for
unaligned) is taken into account.
2018-05-15 09:59:20 +08:00
chenjianqiang
b5de860bcb revise the explain of a parameter(brk_len) in uart driver file 2018-05-14 19:47:16 +08:00
kooho
a8d26d7e4d driver(rmt):Fix rmt_tx_stop bug. 2018-05-14 19:46:30 +08:00
Roland Dobai
ca08397b6b Fix compilation errors when -O3 is used
Closes https://github.com/espressif/esp-idf/issues/718
2018-05-14 12:29:57 +02:00
jack
c384fa2492 rename clock enable and reset bits for SPI modules
1.The names of clock enable and reset bits do not match with TRM, just rename them.
2018-05-14 16:45:03 +08:00
kooho
1bebec05c6 driver(ledc): fix duty and fade issues and add thread-safe version APIs.
1. Fix the duty fade check issue reported from https://github.com/espressif/esp-idf/issues/1914
2. Fix the duty overflow issue when duty_scale is set to 1.
3. Fix the duty fade error when a fade operation is under way. We must configure a new duty setting after the previous fade operation has finished due to hardware limit.
4. Add thread-safe version APIs to set duty and fade.
5. Correct the duty range in driver.
2018-05-14 12:27:21 +08:00
Angus Gratton
e23ee9fa73 Merge branch 'bugfix/ledc_error' into 'master'
ledc driver: Clarify logging of function argument errors

See merge request idf/esp-idf!2380
2018-05-14 09:16:02 +08:00
Angus Gratton
64c52022b9 Merge branch 'bugfix/add_comments_for_adc' into 'master'
driver(adc): Add descriptions that starting ADC can trigger interrupt of GPIO36…

See merge request idf/esp-idf!1910
2018-05-11 18:54:40 +08:00
kooho
d53661a663 driver(adc): add descriptions for the issue that starting ADC can trigger interrupt of GPIO36 and GPIO39. 2018-05-11 17:08:58 +08:00
Mahavir Jain
b2a1a79eb4 i2s: fix issue in dma descriptor allocation if SPIRAM is enabled
It has been observed that, if external SPIRAM is enabled, then under
certain scenarios (e.g. internal memory being too much fragmented),
I2S tx/rx descriptors can land in external SPIRAM and hence resulting
in failure in DMA. Adding explicit capability to allocate in only DMA
capable memory.

Signed-off-by: Mahavir Jain <mahavir@espressif.com>
2018-05-10 18:26:01 +05:30
Angus Gratton
feb64c3be6 ledc driver: Clarify logging of function argument errors
Some parameter errors did not specify which parameter was invalid.

Adds a new macro to name the invalid param.
2018-05-10 17:21:35 +08:00
Ivan Grokhotkov
a2556229aa Merge branch 'bugfix/uart_fix_get_baudrate_error_bug' into 'master'
driver(uart):   Fix uart_get_baudrate incorrect return value when using ref_tick

See merge request idf/esp-idf!2295
2018-05-08 20:25:13 +08:00
michael
197f594b06 fix(spi): fix the issue when bus flag not set, dual mode cannot be used. 2018-05-08 15:47:26 +08:00
michael
28beafc624 fix(spi): fix the issue that native pins don't work after SPI initialized before 2018-05-08 15:47:25 +08:00
Michael (XIAO Xufeng)
1f085b1a3b feat(gpio): add function allowing switching input source from GPIO back to IOMUX 2018-05-08 15:47:25 +08:00
Angus Gratton
b90ad81f22 driver: Add notes to SPI driver docs about thread safety 2018-05-07 09:03:48 +08:00
kooho
0dca2d4c68 driver(uart): Fix uart_get_baudrate incorrect return value when using ref_tick 2018-05-04 09:41:41 +08:00
Angus Gratton
1cb5712463 cmake: Add component dependency support
Components should set the COMPONENT_REQUIRES & COMPONENT_PRIVATE_REQUIRES variables to define their
requirements.
2018-04-30 09:59:20 +10:00
Angus Gratton
4f1a856dbf cmake: Remove defaults for COMPONENT_SRCDIRS, COMPONENT_SRCS, COMPONENT_ADD_INCLUDEDIRS
* Philosophical: "explicit is better than implicit".
* Practical: Allows useful errors if invalid directories given in components as the defaults aren't
  always used. Also trims the -I path from a number of components that have no actual include
  directory.
* Simplifies knowing which components will be header-only and which won't
2018-04-30 09:59:20 +10:00
Angus Gratton
c671a0c3eb build system: Initial cmake support, work in progress 2018-04-30 09:59:20 +10:00
Liu Zhi Fu
ed46976f41 esp32/bt/driver: support static allocation of FreeRTOS queues used by ISR routine
Support static allocation of FreeRTOS queues used by ISR routine in WiFi/BT/esp_timer/driver etc
2018-04-27 15:02:30 +08:00
Ivan Grokhotkov
2699bb49ae sdspi: handle delayed responses for data write commands
Command response tokens can be delayed from the original command by 1
to 8 bytes. In 4a2489b9, handling for delayed tokens was added for
normal (no data) commands, and data read commands. This adds handling
for delayed commands for data write commands.
2018-04-26 10:04:44 +08:00
Ivan Grokhotkov
52f9a5ca16 Merge branch 'bugfix/sdspi_wp_cd_pins' into 'master'
sdmmc, sdspi: fix handling of CD and WP

See merge request idf/esp-idf!2285
2018-04-24 20:53:47 +08:00
Ivan Grokhotkov
85ab4fc83e sdmmc host: add handling of CD and WP pins
Previous version of the code only connected CD and WP to the
peripheral, in fact the hardware does not use the values of these
signals automatically. This adds code to read CD and WP values when
command is executed and return errors if card is not present, or
write command is executed when WP signal is active.
2018-04-24 19:08:44 +08:00
Ivan Grokhotkov
829c6cef39 sdmmc host: when parameter validation fails, exit cleanly
This fixes lock-up which happened when sending a command, if the
previous command has failed.
2018-04-24 19:08:44 +08:00
Ivan Grokhotkov
92a16ac6e6 sdspi: fix CD and WP incorrectly configured as outputs 2018-04-23 14:35:40 +08:00
Ivan Grokhotkov
2a7d85cfa4 sdmmc, sdspi: fix initializers to be C++-compatible, add test
Closes https://github.com/espressif/esp-idf/issues/1861
Closes https://github.com/espressif/arduino-esp32/issues/1312
2018-04-23 14:35:13 +08:00
Flavio Bayer
d477d3c5bd bugfix/sdspi_host.c: wrong CD/WP pin configuration
Looks like the configuration of CP and WP pins are wrong, since the check for `gpio_cd` and `gpio_wp` in `slot_config` seems to be swapped.
2018-04-23 11:32:42 +10:00
Ivan Grokhotkov
22fbcd276c Merge branch 'feature/amazon_freertos_compat_v2' into 'master'
Changes for Amazon Freertos compatibility

See merge request idf/esp-idf!2123
2018-04-20 14:55:47 +08:00
Ivan Grokhotkov
6185e722c3 Revert "Merge branch 'feature/vfs_select' into 'master'"
This reverts merge request !2074
2018-04-20 11:51:41 +08:00
Mahavir Jain
43a12894ea driver/spi: add _ISR counterparts if invoked from interrupt for critical section
Signed-off-by: Mahavir Jain <mahavir@espressif.com>
2018-04-19 18:28:55 +05:30
Ivan Grokhotkov
88d0d6ffb0 Merge branch 'feature/vfs_select' into 'master'
Allow VFS file descriptors in select()

See merge request idf/esp-idf!2074
2018-04-19 15:06:02 +08:00
Ivan Grokhotkov
b297b72abb Merge branch 'bugfix/fix_gpio_install_isr_service_check_value' into 'master'
driver(gpio): modify return value when gpio ISR service already exists.

See merge request idf/esp-idf!2125
2018-04-19 15:01:50 +08:00
Roland Dobai
6852d653bd Allow VFS file descriptors in select() 2018-04-17 11:25:30 +02:00
Mahavir Jain
959c677025 rtc_module: fix build failure if assertions are disabled
Closes https://github.com/espressif/esp-idf/issues/1841

Signed-off-by: Mahavir Jain <mahavir@espressif.com>
2018-04-17 10:44:48 +05:30
Ivan Grokhotkov
d3fd00c049 Merge branch 'bugfix/spi_miso_on_input_only_pins' into 'master'
fix(spi): allow to use MISO on GPIO34-39.

See merge request idf/esp-idf!2136
2018-04-16 14:39:02 +08:00
Angus Gratton
8b3fda99f5 Merge branch 'feature/uart_add_api_get_cmd_position' into 'master'
driver(uart): Add API to get the position of cmd_char

See merge request idf/esp-idf!2177
2018-04-16 08:03:25 +08:00
Wang Jia Lin
6c44fc70bc Merge branch 'feature/gpio_add_hold_support' into 'master'
driver(gpio):   Add api support digital pad hold function

See merge request idf/esp-idf!2186
2018-04-13 12:18:44 +08:00
Michael (Xiao Xufeng)
45f8bcf3f8 fix(spi): allow using MISO on GPIO34-39
Breaking Changes: arguments of ``spicommon_bus_initialize_io`` are changed.

Closes https://github.com/espressif/esp-idf/issues/1736.
2018-04-12 17:01:38 +08:00
Michael (Xiao Xufeng)
77629129c0 chore(spi): update the return value of spi init functions 2018-04-12 17:01:38 +08:00
Michael (Xiao Xufeng)
dceb3452c7 doc(spi_master): format the documentation of several fields and macros in spi_master.h 2018-04-12 17:01:37 +08:00
kooho
2236249555 driver(pcnt): Add some APIs to support each unit can have it's own interrupt handler. 2018-04-11 16:15:09 +08:00
Ivan Grokhotkov
c6829fa5b8 sdmmc: improve error handling during SPI mode init
- In SPI mode, the card will respond to the initial SDIO reset (done
using CMD52) with “invalid command” error. Handle this correctly.

- sdmmc_card_init had a hack where GO_IDLE_STATE (CMD0) command was
sent twice. Add explanation why this is done, and don’t expect
correct response from the card on first CMD0.

- improve logs printed at debug level by adding CMD index
2018-04-11 11:11:17 +08:00
Ivan Grokhotkov
ee600784c5 sdmmc: add SDIO support
- Add SDIO support at protocol layer (probing, data transfer, interrupts)
- Add SDIO interrupts support in SDMMC host
- Add test (communicate with ESP32 in SDIO download mode)
2018-04-11 11:07:13 +08:00
Ivan Grokhotkov
5f97e6bebb sdmmc: fill as many DMA descriptors as possible 2018-04-11 11:06:50 +08:00
Ivan Grokhotkov
20a8c3318a sdmmc: do expect CMD_DONE interrupt after response timeout
Existing code assumed that response timeout is not followed by CMD_DONE,
which was not true, in fact. Host datasheet states that CMD_DONE is sent
after an RTO.
2018-04-11 11:06:50 +08:00
Ivan Grokhotkov
01cd2fce73 sdmmc: print error status only once 2018-04-11 11:06:50 +08:00
Ivan Grokhotkov
5fc6fb58ea sdmmc: don't whitelist the opcodes when handling response timeout
All the commands which do not have a response must have their flags set
accordingly. Therefore the host will not send RTO interrupt if response
is not expected. It is a bug in the code logic if it happens otherwise.
2018-04-11 11:06:50 +08:00
Ivan Grokhotkov
f02cff13cc sdmmc: set highest possible host clock divider
SDMMC host suffers from an issue that it outputs data near the rising
edge of the card clock, which is the edge used by the card to sample
data. If sampling time constraint is not satisfied, card may read data
after the transition.

The phases of output/input data can, in fact, be adjusted. However this
adjustment happens in the clock generation block outside of the host.
So the maximum phase change which can be created this way is equal to
half of the host clock period. So if the host clock is set to the lowest
possible frequency (for the given card frequency), then the phase offset
(and hence the hold time) will be the highest. This change modifies the
logic used to determine clock dividers accordingly.

sdmmc host: set correct dout phase and print correct frequency
2018-04-11 11:06:50 +08:00
Ivan Grokhotkov
84d6793f77 sdmmc: don't set data_expected on SET_BUS_WIDTH command
SET_BUS_WIDTH is not a data transfer command. Extensive search in the
host datasheet and SD card spec did not reveal the origin of this hack
or 'feature'. Further testing showed that removing this does not lead to
regressions.
2018-04-11 11:06:50 +08:00
Ivan Grokhotkov
42de5fb76d sdmmc: send init sequence before CMD0 2018-04-11 11:06:50 +08:00
kooho
ccf09c3b39 driver(gpio): Add api support digital pad hold function. 2018-04-10 11:31:59 +08:00
Ing. Jaroslav Šafka
3d89c8ba74 rmt: Fix LoadProhibited on RX END
Fixes exceptions LoadProhibited, when rmt tries read variable p_rmt on RX END which can be 0.
It happens after esp_reset()  (OTA) and the rmt is not probably stopped by it.
In other words the routine rmt_driver_isr_default was called before second rx channel was registered.

scenario:
register tx channel
register rx channel
reboot
register tx channel
-> exception (because rx channel is accessed)

Merges https://github.com/espressif/esp-idf/pull/1671
2018-04-09 12:29:05 +10:00
Angus Gratton
53234ef2bc Merge branch 'refactor/rtc_split_module' into 'master'
bugfix(rtc): make sure peripherals (DAC, HALL) are turned off before conversion.

See merge request idf/esp-idf!1848
2018-04-04 09:00:58 +08:00
kooho
305c788c60 driver(uart): Add API to get the position of cmd_char 2018-04-03 12:34:16 +08:00
Ivan Grokhotkov
4a2489b99a sdspi: fix compatibility issue in multi block read
SDSPI driver optimized polling of the response tokens by requesting
two extra bytes on top of the block size (512) and CRC (2), and
checking whether these bytes contained the data response token or
not. In case the token was there, further polling would not need to
happen, thereby reducing latency between two consecutive blocks
transferred. However this caused compatibility issues when these two
extra bytes were sent after reading the final block. When
STOP_TRANSMISSION command was sent, these extra two bytes were
treated as part of the command, causing an invalid command error.

This fixes the logic by only requesting extra two bytes if the block
being read is not the final block. In addition to that, more strict
error checking is implemented for command response tokens.
2018-03-30 18:49:42 +08:00
Ivan Grokhotkov
229f67b816 sdspi: handle delayed R1 responses for data read commands 2018-03-30 18:49:42 +08:00
Ivan Grokhotkov
bbbdec24d9 sdspi: handle error flags for R3/R7 responses
Previously error flags were only handled for R1 responses. This change
moves error handling into a separate function and calls it for R1/R3/R7.
2018-03-30 18:49:42 +08:00
Jiang Jiang Jian
8b9f237cb9 Merge branch 'feature/i2s_add_expand_function' into 'master'
add a new i2s feature to expand the original i2s width

See merge request idf/esp-idf!1617
2018-03-30 14:51:23 +08:00
kooho
8e1f930582 driver(gpio): Modified the GPIO_CHECK's return value when ISR service already installed 2018-03-29 09:58:31 +08:00
Ivan Grokhotkov
1a157279e0 Merge branch 'doc/adc1_channel_config' into 'master'
adc: Add doc details about configure not needed before each read

See merge request idf/esp-idf!2132
2018-03-28 19:11:44 +08:00
Michael (Xiao Xufeng)
cef8baf424 bugfix(rtc): make sure peripherals (DAC, HALL) are turned off before conversion.
refactor structure of ``rtc_module.c`` to make it more clearly.

Closes https://github.com/espressif/esp-idf/issues/1517
2018-03-28 17:10:01 +08:00
Angus Gratton
4507b3fde6 adc: Add doc details about configure not needed before each read 2018-03-28 11:52:41 +11:00
Ivan Grokhotkov
2935e958fc Merge branch 'bugfix/adc2_cct' into 'master'
fix(adc2): fix cct and xpd configurations to improve precision of ADCs

See merge request idf/esp-idf!2020
2018-03-27 16:23:43 +08:00
Ivan Grokhotkov
892f3907fa Merge branch 'bugfix/i2c_ack_error_bug' into 'master'
driver(i2c):  Fixed i2c interrupt wdt timeout bug

See merge request idf/esp-idf!2049
2018-03-27 12:29:23 +08:00
Michael (Xiao Xufeng)
7563510758 feat(spi_master): allow output high speed data when dummy bits are not used. 2018-03-26 21:24:32 +08:00
michael
28e832c37e fix(adc2): fix cct and xpd configurations to improve precision of ADCs 2018-03-26 12:02:26 +00:00
kooho
37db055cff driver(i2c): Fixed ack_err interrupt can't exit bug. 2018-03-26 16:31:17 +08:00
Zhang Zhao Xiang
f48ecb8613 Add a new i2s feature to expand the original i2s width 2018-03-22 18:52:55 +08:00
Ivan Grokhotkov
7e2028d598 Merge branch 'bugfix/gpio_timer_doc_fixes' into 'master'
Minor fixes of GPIO and timer group driver docs

See merge request idf/esp-idf!2081
2018-03-20 10:49:36 +08:00
Ivan Grokhotkov
b9a8912659 Merge branch 'bugfix/spi_master_const_dev_config_t' into 'master'
spi master: use constant dev_config parameter in spi_bus_add_device

See merge request idf/esp-idf!2082
2018-03-19 16:31:19 +08:00
Jonathan Kaufmann
a99d4d5a7f Modified spi_bus_add_device so that it takes a constant *dev_config parameter.
Merges https://github.com/espressif/esp-idf/pull/1690
2018-03-19 12:17:45 +08:00
Stefan Tauner
38daa1e716 docs: fix description of timer_get_alarm_value()
Replace c&p text with an actual description.

Merges https://github.com/espressif/esp-idf/pull/1740
2018-03-19 11:56:57 +08:00
Stefan Tauner
86a1d579ff docs: add warning to gpio_get_level()
On most microcontrollers I have worked with one can retrieve the
current state of output GPIO pins. On ESP32 this is not the case
if the pad is not explictly configured to route this information into
the port by configuring it as input or i/o.
Thus add a warning to the API documentation of gpio_get_level().

Merges https://github.com/espressif/esp-idf/pull/1740
2018-03-19 11:56:57 +08:00
Michael (Xiao Xufeng)
15be0829fa test(spi_master): test spi master speed performance by median value.
also increase the boundary of SPI limit by a little.
2018-03-16 16:37:19 +08:00
Xu Chun Guang
973913b151 feat: Adjust log level about UART
There are too many log when UART baud is around 2Mbps if not use hard flow control.
2018-03-13 16:01:37 +08:00
Ivan Grokhotkov
c8ba6cf156 Merge branch 'feature/rtc_gpio_isolate' into 'master'
Add rtc_gpio_isolate function, use it in deep sleep examples

See merge request idf/esp-idf!1936
2018-02-26 06:09:08 +08:00
Angus Gratton
63ddae5087 Merge branch 'bugfix/i2s_driver' into 'master'
i2s: add support fixed_mclk configuration

See merge request idf/esp-idf!1600
2018-02-22 12:03:26 +08:00
Tuan PM
7cda34c626 i2s: add support fixed_mclk configuration 2018-02-22 09:00:23 +07:00
h3ndrik
dcc466a673 i2s: fix type mismatch of intr_alloc_flags
Merges https://github.com/espressif/esp-idf/pull/1589
2018-02-16 16:20:12 +11:00
Ivan Grokhotkov
363c096f2b Merge branch 'test/adc2_with_wifi_reopen' into 'master'
test(adc2): re-enable the adc2 test.

See merge request idf/esp-idf!1926
2018-02-11 22:32:18 +08:00
Ivan Grokhotkov
f45622ff17 driver/rtc: add rtc_gpio_isolate helper function to disconnect RTC IO 2018-02-11 13:18:51 +08:00
Ivan Grokhotkov
e381c6adde Merge branch 'bugfix/fix_i2s_adc_mode' into 'master'
driver(i2s): fix broken i2s adc mode

See merge request idf/esp-idf!1653
2018-02-11 12:58:58 +08:00
Ivan Grokhotkov
62f924544d Merge branch 'test/spi_performance' into 'master'
test(spi_master): add performance display for spi master.

See merge request idf/esp-idf!1923
2018-02-08 22:59:40 +08:00
michael
687d6aa2cd test(adc2): re-enable the adc2 test. 2018-02-08 13:48:25 +08:00
Jeroen Domburg
35de8d703e Merge branch 'bugfix/spi_gpio0' into 'master'
fix(spi): several fixes about maros (flags) and GPIO0.

See merge request idf/esp-idf!1666
2018-02-07 18:50:13 +08:00
Michael (Xiao Xufeng)
a151767426 test(spi_master): add performance display for spi master. 2018-02-07 17:50:13 +08:00
Wangjialin
451f69cc2e driver(i2s): fix broken i2s adc mode
1. Move i2s reset code from i2s_stop to i2s_start.
2. add RTC API to set sw mode for ADC
3. add description for adc_power_always_on()
4. add lock for i2s dma and RTC ADC functions.
5. add ADC read task in example

reported from bbs:  https://esp32.com/viewtopic.php?f=13&t=3490&p=17522#p17522
reported from github: https://github.com/espressif/esp-idf/issues/1333
2018-02-07 17:17:20 +08:00
Michael (XIAO Xufeng)
e14e1508cb fix(sdmmc_host): fix the issue when slot and host flag are not compatible. 2018-02-07 12:05:05 +08:00
Michael (XIAO Xufeng)
8abbb17401 feat(sdmmc_host): force pull-up DAT3 for SD 4-bit mode so that slave will not fall into SPI mode. 2018-02-07 12:05:05 +08:00
Michael (Xiao Xufeng)
5214a0600c test(adc2): temporary ignore adc2 unit test (with WiFi) to pass the CI.
the issue is introduced in commit 17f01eb718.
2018-02-06 11:59:40 +08:00
Angus Gratton
4297c337f9 esp32: Add IO_MUX_GPIOxx register names to match iomux names used in TRM
The TRM describes IOMUX registers are IO_MUX_x_REG for x in GPIO0-39.

Until now ESP-IDF describes them as PERIPHS_IO_MUX_(pinname)_U

This commit adds additional IOMUX register names which match the ones used in the TRM.
2018-01-30 17:09:37 +08:00
michael
be96e1db95 fix(spi): fix typo of LSBFIRST macro.
Closes https://github.com/espressif/esp-idf/issues/1480, Closes https://github.com/espressif/esp-idf/issues/1464
2018-01-29 17:44:37 +08:00
michael
8900200147 fix(spi_master): fix the variable command and address flag issue.
Closes https://github.com/espressif/esp-idf/issues/1549
2018-01-29 17:44:36 +08:00
michael
60469c500a fix(spi): fix pin issue with GPIO0 (other pins than CS). 2018-01-29 17:44:36 +08:00
Wangjialin
3da8f2eda1 bugfix(touch): change the default value for sar_touch_enable register.
Reported from github: https://github.com/espressif/esp-idf/issues/1236

All the touch channels are enabled by default in hardware. This would interfere other RTC function on Touch IOs.
Disable touch function in touch_pad_init().
2018-01-29 15:40:21 +08:00
Wangjialin
870efdb9d4 bugfix(uart): patten detect function
requirement from github(https://github.com/espressif/esp-idf/issues/805): to provide the position in the buffer of the pattern detected.

requirement from AT application: in AT app, when no hardware flow control is enabled, in some situation the rx buffer might be full, and the terminator “+++” might be lost, we can use pattern detect interrupt to avoid missing the terminator. When pattern detect interrupt happens, it will not send a data event at the same time.

1. Add API to get position of detected pattern in rx buffer
2. Modify UART event example
3. Add comments for uart_flush, add alias API uart_flush_input to clear the rx buffer
4. Modify the way rx_buffered_len is calculated
2018-01-22 13:33:51 +08:00
kooho
492db0591d Fix uart fifo overflow bug 2018-01-12 14:42:54 +08:00
Angus Gratton
2227c44254 rmt: Add void * argument for end-of-transmission callback
Ref https://github.com/espressif/esp-idf/pull/1174
2018-01-05 17:31:59 +11:00
Krzysztof Bociurko
1066c74b74 rmt: Adds a simple handler that can be called when transmission ends.
Merges https://github.com/espressif/esp-idf/pull/1174
2018-01-05 17:14:02 +11:00
Ivan Grokhotkov
30aacb79d5 Merge branch 'bugfix/uart_semaphore_pr1387' into 'master'
uart driver: Remove unnecessary xSemaphoreGive()

See merge request !1739
2018-01-05 11:05:05 +08:00
Angus Gratton
6e23ee704b Merge branch 'refactor/spi_clk_pre_cal' into 'master'
bugfix(spi_master): improve spi time cost for each transfer.

See merge request !1670
2018-01-04 06:03:12 +08:00
Alexey Morozov
25b8642835 uart driver: Remove unnecessary xSemaphoreGive()
avoid unnecessary call of xSemaphoreGive(p_uart_obj[uart_num]->tx_mux);

Merges https://github.com/espressif/esp-idf/pull/1387
2018-01-03 13:44:19 +11:00
Per Malmberg
f7f52414ec Removed logging in RMT driver which skews the timing. Issue #1345
Merges https://github.com/espressif/esp-idf/pull/1450
2018-01-03 10:50:03 +11:00
Per Malmberg
5fb16d9b2b Fix regression in i2c_master_read() which rejected all data lenths. 2017-12-28 14:54:15 +01:00
michael
2552fdccd1 chore(spi): add log to show native pins or not when configure pins. 2017-12-28 12:03:29 +08:00
michael
f4be6ac84d fix(spi_master): fix the logic in the ISR to prevent re-config registers when device is not changed. 2017-12-28 12:03:29 +08:00
michael
7a7b8fc182 refactor(spi_master): move the clock calculation from ISR to initialization. 2017-12-28 12:03:28 +08:00
Angus Gratton
ec7cac5fe8 Merge branch 'feature/docs_update_rmt_api' into 'master'
RMT API docs update, new example

See merge request !1564
2017-12-27 09:23:47 +08:00
kooho
d78be97154 add NACK for the last byte to read 2017-12-26 21:50:18 +08:00
Angus Gratton
661d584ae7 Merge branch 'bugfix/i2c_fixes_pr1180' into 'master'
i2c: rx <-> tx typo's, NULLing free'd variable, consistent CRITICAL sects

See merge request !1551
2017-12-18 06:44:33 +08:00
Angus Gratton
8f874aaa0f Merge branch 'bugfix/i2c_use_queue_instead_of_eventbit' into 'master'
bugfix(i2c): use queue instead of event group for internal commands

See merge request !1616
2017-12-15 13:54:03 +08:00
Chuck Todd
d913fff6d7 i2c: rx <-> tx typo's, NULLing free'd variable, consistent CRITICAL sects
A couple of typos referencing tx_ring_buf when rx_ring_buf, slv_tx_mux
instead of slv_rx_mux.

Also, I2C_ENTER_CRITICAL()/I2C_EXIT_CRITICAL() usage was not consistent.
Only some of the _set_ functions had them.  Most of the _get_ function
had them?  It is my understanding that they should be wrapped around
writes, not reads? (I think we still need the lock for reading pairs of consistent values)

Also, the ticks_to_wait timeout handling in i2c_master_cmd_begin() would
not handle integer rollover correctly.

Merges https://github.com/espressif/esp-idf/pull/1180
2017-12-11 11:08:39 +08:00
Ivan Grokhotkov
269486ca4d sdspi: use response timeout passed from upper layer
Previously SDSPI host driver would rely on retry count when waiting for
the card to read or write data. This caused different timeout times
depending on CPU frequency and card clock frequency. In practice, card
performance does not depend on these two factors.
This change uses timeout_ms field of sdmmc_command_t introduced
previously for SDMMC host.

Fixes https://esp32.com/viewtopic.php?f=2&t=3440&p=16037 and similar
issues related to SDSPI timeouts.
2017-12-11 11:07:08 +08:00
Fabiano Kovalski
9075b507b5 driver(i2c): corrected timeout range for i2c_set_timeout.
Merges https://github.com/espressif/esp-idf/pull/1353
2017-12-08 14:26:35 +08:00
krzychb
421592a8eb LEDC Driver: Added back original definitions of 'duty_resolution' and 'clock_divider'. This update is to provide backward compatibility with ESP-IDF 2.1. 2017-12-04 21:12:56 +01:00
Jiang Jiang Jian
c672fc54fd Merge branch 'feature/ledc_more_meaningful_parameter_names' into 'master'
Provided more meaningful parameter names by renaming 'bit_num' to 'duty_resoluti…

See merge request !1440
2017-12-01 19:33:53 +08:00
krzychb
866b84b9f8 Typo fix. Closes https://github.com/espressif/esp-idf/issue/1323 2017-12-01 09:06:08 +01:00
Wangjialin
bf3c41bb92 bugfix(i2c): use queue instead of event group for internal commands
Reported from github:
https://github.com/espressif/esp-idf/issues/1312
https://github.com/espressif/esp-idf/issues/1193

Issues:
1. We used to use event group in the driver, which would cause:
    a. longer operation time since the event group are based on FreeRTOS timer.
    b. Operation fails if the timer queue is not long enough.
2. There might be some issue with event group, we will still try to provide a small test code in other branch.

modification:
1. use queue instead of event-bit for internal commands
2. use queue overwrite for cmd_done event
2017-11-29 12:33:11 +08:00
Angus Gratton
5e7478a055 Merge branch 'bugfix/ledc_fade_scale' into 'master'
driver(LEDC): add scale value check in ledc_set_fade API

See merge request !1583
2017-11-27 07:23:19 +08:00
panfeng
b553c925b1 bugfix: while scale equals 0 will cause crash 2017-11-23 17:56:18 +08:00
kooho
ada33fe3dd Add GPIO input and output disable option 2017-11-22 15:00:27 +08:00
krzychb
2ec35f60ca RMT API docs update, new example 2017-11-21 22:34:23 +01:00
Ivan Grokhotkov
4b8f55aadf Merge branch 'bugfix/minor_fixes_github' into 'master'
Minor fixes from github

See merge request !1555
2017-11-20 15:58:34 +08:00
Angus Gratton
f54e99008d spi: Add ESP_ERR_NO_MEM to spi_device_queue_trans() documentation
Ref https://github.com/espressif/esp-idf/pull/1243#issuecomment-343103414
2017-11-20 16:06:59 +11:00
michael
02573a8dc9 fix(spi_master): release temporary memory when queue new trans timeout. 2017-11-17 12:15:19 +08:00
michael
13d38f10ee test(spi): internal connection test master with slave for address and command field. 2017-11-17 12:15:19 +08:00
michael
57e1d47ad7 fix(spi_master): fix the CS pin issue with GPIO 0.
Closes #909
2017-11-17 12:15:19 +08:00
michael
842292523f fix(spi_slave): add interrupt free into bus free process. 2017-11-17 12:14:40 +08:00
Raphael Luba
31711b5ac7 SPI: Document TIMEOUT return values
`spi_device_queue_trans` and `spi_device_get_trans_result` can return `ESP_ERR_TIMEOUT` – but this had not been documented.

Merges https://github.com/espressif/esp-idf/pull/1243
2017-11-17 10:50:54 +11:00
krzychb
d488bb7bac Provided more meaningful parameter names by renaming 'bit_num' to 'duty_resolution' and 'div_num' to 'clock_divider' 2017-11-15 08:08:12 +01:00
Ivan Grokhotkov
da141a2c7e Merge branch 'bugfix/touch_pad_register_mismatch' into 'master'
Bugfix/touch pad register mismatch

See merge request !1469
2017-11-15 14:52:13 +08:00
Wangjialin
7200b2cc11 bugfix(touch): registers of touchpad 8 and 9 are mismatched
1. All the registers of touch sensor 8 and 9 are mismatched except the ‘dac’ field in touch register of RTC IO
2. To swap the index for sensor 8 and 9 in APIs.
2017-11-14 18:47:56 +08:00
Ivan Grokhotkov
09d2791cfd Merge branch 'feature/spi_variable_len' into 'master'
feat(spi_master): add new feature allow use variable command and address field length for the same device.

See merge request !1322
2017-11-14 00:08:50 +08:00
Ivan Grokhotkov
5404252e80 Merge branch 'bugfix/uart_fifo_bug_workaround' into 'master'
bugfix(uart): workaround for uart fifo reset issue

See merge request !1499
2017-11-13 17:46:42 +08:00
Wangjialin
4052803e16 bugfix(uart): workaround for uart fifo reset issue
Reported from github:
https://github.com/espressif/esp-idf/issues/1219
https://github.com/espressif/esp-idf/issues/1202

After providing a simple code to digital team, they confirmed that this is a hardware bug.

Root cause:
The fifo reset signal is incorrectly connected
If we want to reset tx fifo of UART2, we have to set txfifo_rst bit of both UART1 and UART2
If we want to reset rx fifo of UART2, we have to set rxfifo_rst bit of both UART1 and UART2

Workaround:
we don't use fifo rst bit in driver.

Documentation:
Digital team would update TRM and give more explanation about this issue.
2017-11-13 15:23:00 +08:00
Anton Maklakov
27c1fc52ba Added .command_timeout_ms = 0 to SDSPI_HOST_DEFAULT() too 2017-11-08 12:52:50 +08:00
Philip Ashmore
d72bef02e9 Added .command_timeout_ms = 0 to SDMMC_HOST_DEFAULT() in components/driver/include/driver/sdmmc_host.h 2017-11-03 17:15:44 +08:00
XiaXiaotian
42cefc173f refractor WiFi clock setting
Do not set WiFi clock in PHY initializing function, move it to WiFi
   start/stop function.
2017-11-02 15:24:21 +08:00
wangmengyang
bd6394db92 component/bt: clean up WIFI_CLK_EN_REG settings for Bluetooth
1. move settings of WIFI_CLK_EN_REG for bluetooth into controller init/deinit APIs
2. modify the bit mask used in phy_rf init/deinit to use WIFI-BT shared bits
2017-11-02 15:24:21 +08:00
michael
0330ec270a feat(spi_master): add new feature allow use variable command and address field length for the same device.
Closes #654
2017-10-30 19:33:41 +08:00
Angus Gratton
7c9b24b407 Merge branch 'bugfix/fix_uart_vfs_test_error' into 'master'
bugfix(uart): Don't disable console uart peripheral

See merge request !1456
2017-10-27 19:20:13 +08:00
Wangjialin
102eb96c8b bugfix(uart): Don't disable console UART peripheral 2017-10-27 16:46:10 +08:00
Angus Gratton
ffeecde9e2 Merge branch 'feature/docs_update_timer_api' into 'master'
Timer API docs update, refactored example

See merge request !1316
2017-10-27 13:31:18 +08:00
krzychb
9b7d5d76a7 Timer API docs update, refactored example 2017-10-27 07:13:59 +02:00
Angus Gratton
f5b3a370cd Merge branch 'feature/adc2_driver' into 'master'
feature(adc2): add support to use ADC2 when WIFI is disabled

See merge request !1237
2017-10-26 15:48:48 +08:00
michael
87f2b27dc4 refactor(rtc): re-organize code in rtc_module.c 2017-10-26 14:35:30 +08:00
michael
d30f3e7aa8 example(adc2): add example and test case for adc2.
closes #461
2017-10-26 14:35:30 +08:00
esp32de
7c0020bfd0 feat(adc2): append adc2 support and api and the lock with WIFI module
append adc support and api
- esp_err_t adc2_config_width(adc_bits_width_t width_bit);
- esp_err_t adc2_config_channel_atten(adc2_channel_t channel, adc_atten_t atten);
- int adc2_get_voltage(adc2_channel_t channel);
2017-10-26 14:35:29 +08:00
Wangjialin
303b9f60db bugfix(uart): set default tx idle num
Reported from:
https://github.com/espressif/esp-idf/issues/703
https://github.com/espressif/esp-idf/issues/917
In uart driver we didn't change the default value of tx idle num, so there would be a delay after tx FIFO is empty.

1. Add API to set tx idle interval before next data transmission. (The UART hardware can add an interval after tx FIFO is empty).
2. Set default tx idle interval to zero.
3. Add hardware disable in uart driver delete function.
2017-10-25 13:29:02 +08:00
michael
a6ac5b33c9 feat(rtc): open adc*(dac)_pad_get_io_num functions to public. 2017-10-24 12:06:14 +08:00
michael
cff8d30c25 refactor(rtc): change register writing from macros to structures in *_struct.h 2017-10-24 12:05:52 +08:00
Angus Gratton
01befe4d6a Merge branch 'bugfix/i2c_hw_fsm_recover' into 'master'
bugfix(i2c): add I2C hardware reset if the hw FSM get stuck

See merge request !1272
2017-10-23 10:16:02 +08:00
Ivan Grokhotkov
f039aac1e5 Merge branch 'bugfix/i2s_bck_polariy' into 'master'
bugfix(i2s): fix bck polarity issue when using pll clock.

See merge request !1428
2017-10-22 12:36:27 +08:00
Ivan Grokhotkov
000a4f5941 Merge branch 'bugfix/rmt_thresh_check' into 'master'
bugfix(rmt): fix event thresh check issue

See merge request !1423
2017-10-22 12:35:44 +08:00
Ivan Grokhotkov
59b7d98fec Merge branch 'feature/dfs' into 'master'
Dynamic frequency scaling

See merge request !1189
2017-10-22 12:34:11 +08:00
Wangjialin
ed1e32f583 bugfix(i2c): add I2C hardware reset if the hw FSM get stuck
Reported from different sources from github or bbs:

https://github.com/espressif/esp-idf/issues/680

https://github.com/espressif/esp-idf/issues/922

We tested reading several sensor or other I2C slave devices, if the power and SDA/SCL wires are in proper condition, everything works find with reading the slave.
If we remove the power supply for the slave during I2C is reading, or directly connect SDA or SCL to ground, this would  cause the I2C FSM get stuck in wrong state, all we can do is the reset the I2C hardware in this case.
After this commit, no matter whether the power supply of I2C slave is removed or SDA / SCL are shorted to ground, the driver can recover from wrong state.

We are not sure whether this the save issue with the reported one yet, but to make the driver more robust.

Further information:

1. For I2C master mode, we have tested different situations, e.g., to short the SDA/SCL directly to GND/VCC, to short the SDA to SCL, to un-plug the slave device, to power off the slave device. Under all of those situations, this version of driver can recover and keep working.
2. Some slave device will die by accident and keep the SDA in low level, in this case, master should send several clock to make the slave release the bus.
3. Slave mode of ESP32 might also get in wrong state that held the SDA low, in this case, master device could send a stop signal to make esp32 slave release the bus.

Modifications:

1. Disable I2C_MASTER_TRAN_COMP interrupt to void extra interrupt.
2. Disable un-used timeout interrupt for slave.
3. Add bus reset if error detected for master mode.
4. Add bus clear if SDA level is low when error detected.
5. Modify the argument type of i2c_set_pin.
6. add API to set timeout value
7. add parameter check for timing APIs
2017-10-21 02:10:59 +08:00
Ivan Grokhotkov
b6f37bda97 Merge branch 'feature/i2s_built_in_adc' into 'master'
feature(I2S-ADC): add ADC mode for I2S.

See merge request !1077
2017-10-20 15:52:56 +08:00
Angus Gratton
477ed8ce62 Merge branch 'bugfix/touchpad_dac_mismatch_on_tp8_tp9' into 'master'
bugfix(touch): add workaround for touch pad DAC hardware source mismatch on tp8 and tp9.

See merge request !1288
2017-10-20 14:18:32 +08:00
Wangjialin
a84db78eb1 bugfix(i2s): fix bck polarity issue when using pll clock.
reported from github: https://github.com/espressif/esp-idf/issues/1119

Digital team think it is due to the decimal divider.
We can reset the i2s tx and rx when calling i2s_stop to avoid this.
2017-10-19 23:23:01 +08:00
Wangjialin
ab1abff080 bugfix(rmt): fix event thresh check issue
reported from: https://github.com/espressif/esp-idf/issues/1011

1. Fix event thresh check issue
2. Change IO number in example in case it conflicts with GPIO16(psram cs pin).
2017-10-18 18:49:09 +08:00
Ivan Grokhotkov
5048d38ce7 spi slave: lock APB frequency while driver is in use 2017-10-18 14:37:21 +08:00
Ivan Grokhotkov
e4616588b7 spi master: lock APB frequency while in transaction 2017-10-18 14:19:21 +08:00
Ivan Grokhotkov
330b6bd668 sdmmc: lock APB frequency while in transaction 2017-10-18 14:19:20 +08:00
Ivan Grokhotkov
fba9678c56 uart: add support for REF_TICK 2017-10-18 14:19:20 +08:00
Gabriel Carstoiu
8128bb95ef fix(spi_slave): enable DMA clock when initialization.
merging in the code updates to the SPI master code done in commit b834fcf78a.

TW#15670, Closes #1027
2017-10-17 12:20:40 +08:00
michael
88f602a0e0 fix(periph_ctrl): fix reset function in periph_ctrl.c 2017-10-17 12:20:40 +08:00
michael
8e31a36562 feat(spi_slave): append trans_len field in trans_desc to show length actually transferred. 2017-10-17 12:01:12 +08:00
Ivan Grokhotkov
edb212986f Merge branch 'bugfix/sd_card_fixes' into 'master'
SD card fixes

See merge request !1393
2017-10-17 04:45:24 +08:00
Angus Gratton
0a52dbccca Merge branch 'bugfix/spi_reset_race' into 'master'
periph_ctrl: Refactor to add periph_module_reset(), avoid potential race in SPI DMA workaround

See merge request !1349
2017-10-13 08:51:36 +08:00
Ivan Grokhotkov
3cf23ff77d sdmmc: allow command timeouts to be configured
Previously the timeout was set to the same value (1000ms) for all kinds
of commands. In some cases, such as with slow cards, write commands
failed to complete in time.
This change makes command timeouts configurable via sdmmc_host_t
structure, and also makes default timeouts different for ordinary
commands and write commands.

Closes https://github.com/espressif/esp-idf/issues/1093

Ref TW15774.
2017-10-13 08:16:07 +08:00
Jiang Jiang Jian
8e47c355fa Merge branch 'feature/i2s_apll' into 'master'
driver/i2s: add support apll clock

See merge request !1115
2017-10-12 19:06:50 +08:00
Jiang Jiang Jian
e0922c9564 Merge branch 'bugfix/i2s_set_pin_valid_gpio' into 'master'
change to GPIO_IS_VALID_OUTPUT_GPIO for data out pin

See merge request !764
2017-10-12 18:21:25 +08:00
Jiang Jiang Jian
da247c2cf8 Merge branch 'bugfix/ledc_duty_type_change' into 'master'
ledc_get_duty return type changed from int to uint32_t, target_duty changed from int to uint32_t

See merge request !752
2017-10-12 18:18:33 +08:00
Jeroen Domburg
a8131b14b0 Merge branch 'feature/docs_update_uart_api' into 'master'
Updated functional overview of UART API documentation

See merge request !1328
2017-10-10 14:06:08 +08:00
Jeroen Domburg
1835c3a213 Merge branch 'feature/docs_update_pcnt_api' into 'master'
Extended description of the Pulse Counter API and removed redundant comments from the example

See merge request !1312
2017-10-10 14:06:03 +08:00
krzychb
9107b47deb Updated UART API documentation and examples. Included a fix of #1091 from GitHub 2017-10-10 05:54:36 +02:00
Tuan PM
9d39881981 i2s: add support apll clock
using apll_param to setup APLL

new apll calculation method, much faster

validate freq calculation

Ensure that the i2s frequency is greater than the hardware limit

Add description of how to calculate apll clock, support apll for other 16-bits audio, check rev0 chip

correct space
2017-10-06 15:36:24 +07:00
Angus Gratton
0dd9b899b7 periph_ctrl: Refactor to add periph_module_reset(), avoid potential race in SPI DMA workaround
Also refactor use of direct clock access in unit test ref_clock (probably not a real issue)
2017-10-02 17:48:16 +11:00
michael
fcd0f52e21 test(spi_master): add test case for 3 DMA issues with internal connection by gpio mux.
3 issues are:
1. RX buffer not aligned (start and end)
2. not setting rx_buffer
3. setting rx_length != length

also add spi release code here.
2017-09-27 10:44:28 +08:00
krzychb
e69691427c Extended description of the Pulse Counter API and removed redundant comments from the example 2017-09-26 22:44:46 +02:00
krzychb
b5e4c76bfe Updated sigma delta API documenation and example 2017-09-25 21:31:09 +02:00
Ivan Grokhotkov
64d1f947ed driver/rtc: fix copy-paste error in HOLD_FORCE field name for GPIO26
This error prevented EXT1 wakeup using GPIO26 from working.
2017-09-21 12:26:03 +08:00
Simon Werner
45ad0cdda2 Improved uart_flush() documentation.
Improved `uart_flush()` documentation based on this discussion: https://esp32.com/viewtopic.php?f=13&t=2804&p=13377&hilit=uart_flush#p13373

Merges https://github.com/espressif/esp-idf/pull/970
2017-09-20 12:09:44 +10:00
Wangjialin
449f9e10a3 bugfix(touch): add workaround for touch pad DAC hardware source mismatch on tp8 and tp9. 2017-09-19 20:10:39 +08:00
michael
1b91cb7be0 fix(sdspi): fix issues causing the sdspi driver to work low efficiently with DMA. 2017-09-19 19:00:47 +08:00
michael
074f36afff fix(spi_master): fix the heap corruption bug that RX DMA writes over the temporary buffer boundary.
TW#15434

Closes #994.
2017-09-19 16:47:14 +08:00
Kewal Shah
379320bdb2 change to GPIO_IS_VALID_OUTPUT_GPIO for data out pin 2017-09-14 13:33:39 +08:00
Wangjialin
2fceec4d85 feature(I2S-ADC): add ADC mode for I2S.
1. Support built-in ADC for I2S.
2. Modify code of ADC, made no change to the original APIs.
3. Add APIs in I2S:
esp_err_t i2s_set_adc_mode(adc_unit_t adc_unit, adc1_channel_t adc_channel);
4. Add I2S ADC/DAC example code.
5. add old-fashion definition to make it more compatible
6. replase spi_flash_ APIs with esp_partition_ APIs
7. add example of generating audio table from wav
8. change example sound
2017-09-14 13:24:08 +08:00
Kewal Shah
c4f15a0e5d ledc_get_duty return type changed from int to uint32_t, target_duty changed from int to uint32_t 2017-09-13 01:43:42 +08:00
Ivan Grokhotkov
23f10e1a57 Merge branch 'feature/uart_software_flow_control' into 'master'
uart: Add api call to switch on hardware support for 'software' flow control. (github #890)

See merge request !1215
2017-09-12 12:11:11 +08:00
Ivan Grokhotkov
de038f502c Merge branch 'feature/gpio_channel_macro' into 'master'
feat(global): add macros for GPIO->channel lookup

See merge request !1170
2017-09-11 12:15:08 +08:00
Ivan Grokhotkov
e12967297d Merge branch 'feature/docs_touch_pad_api' into 'master'
Touch Pad driver overview

See merge request !1195
2017-09-08 11:55:27 +08:00
Ivan Grokhotkov
3c470e7c43 Merge branch 'bugfix/rmt' into 'master'
RMT 2 fixes: Rename one API and specify wait_time in another API

See merge request !896
2017-09-07 18:03:08 +08:00
michael
08b9fbc242 feat(global): add macros for GPIO->channel lookup
including: macros for dac, adc, touch, rtc_gpio, uart and clk_out.

TW#13970
2017-09-07 10:40:25 +08:00
Alex Burr
93cc3a77cb uart: Add api call to switch on hardware support for 'software' flow control.
Cherry-picks https://github.com/espressif/esp-idf/pull/890
2017-09-05 16:30:21 +10:00
krzychb
ba42c46cb3 Touch Pad driver overview 2017-09-05 08:28:44 +02:00
Ivan Grokhotkov
b38186dc43 sdmmc: use periph_ctrl to enable peripheral when initializing the host 2017-09-04 22:43:52 +08:00
Ivan Grokhotkov
956a28a95c driver: add periph_ctrl support for SDMMC, SDIO slave, CAN, EMAC 2017-09-04 22:43:51 +08:00
michael
b834fcf78a fix(spi_master): this fix the SPI MOSI output missing bug. 2017-09-04 22:43:51 +08:00
Jeroen Domburg
fe140fe347 Fix off-by-one in 5MBaud arg checking; propagate errors better 2017-09-01 12:15:28 +08:00
Ivan Grokhotkov
1cfe96b1d7 Merge branch 'bugfix/i2s_dac_channel' into 'master'
fix(i2s_dac): fix the disable function which only disables DAC_CHANNEL_1.

See merge request !1169
2017-08-31 10:45:30 +08:00
Ivan Grokhotkov
b4857fc159 Merge branch 'bugfix/memory_issues_pr838' into 'master'
vfat, i2s, mdns: Fix two memory leaks, one double free (github #838)

See merge request !1173
2017-08-31 10:45:19 +08:00
Angus Gratton
96f9ae3e30 Merge branch 'bugfix/minor_prs_github' into 'master'
Minor bugfixes and corrections from github

See merge request !1181
2017-08-31 07:11:30 +08:00
Angus Gratton
4f812eb29c Remove redundant code line from uart.c
Merges part of https://github.com/espressif/esp-idf/pull/650
2017-08-30 17:55:00 +10:00
Simon Werner
c8d8fb58e7 Fixed incorrect value in comments for GPIO_NUM_33.
Merges https://github.com/espressif/esp-idf/pull/676
2017-08-30 17:55:00 +10:00
Henrik Maier
95fe7929c0 Fix spinlock bug for uart_set_rts and uart_set_dtr
Merges https://github.com/espressif/esp-idf/pull/649
2017-08-30 15:32:23 +10:00
Quentin Thérond
36eccee213 i2s: fix leak in i2s_create_dma_queue if we have a malloc issue. 2017-08-30 12:11:03 +10:00
Darian Leung
88b05f9391 esp_adc_cal: Added ADC calibration component
Added component containg API that is able to correct raw ADC readings
into a voltage in mV. Also provided a helper function that combines
the process of getting the raw ADC1 reading then converting it to a
voltage in mV. In doing so, the adc1_get_voltage() function of the ADC
driver has been deprecated. Instead there is now adc1_get_raw to obtain
the raw ADC1 reading, and adc1_to_voltage() that gets the raw reading
and converts all in one function. Functions using the deprecated
adc1_get_voltage() have also been updated to use adc1_get_raw().

Conversion is based on ADC characteristics. The characteristics are based
on the ADC's v_ref, herefore the appropriate structure and functions have
been provided to obtain the ADC characteristics.

The existing ADC driver has also been modified by adding a function to
route the internal ADC reference voltage to a GPIO allowing users to measure
it manually.

Relevant documentation has also been updated
2017-08-29 18:43:14 +08:00
michael
9ec3757349 fix(i2s_dac): fix the disable function which only disables DAC_CHANNEL_1. 2017-08-29 15:31:39 +08:00
Jeroen Domburg
edbeee8326 Merge branch 'bugfix/spi_def_typo_lsbfirst' into 'master'
bugfix(spi_master): fix the definition of ``SPI_DEVICE_BIT_LSBFIRST``.

See merge request !1154
2017-08-29 11:24:31 +08:00
Ivan Grokhotkov
3161854efb Merge branch 'bugfix/spi_hd_rx' into 'master'
fix(spi_dma_rx): add check to avoid using SPI half-duplex mode DMA with both MOSI and MISO phases.

See merge request !1111
2017-08-28 17:36:58 +08:00
Ivan Grokhotkov
b636f81619 Merge branch 'bugfix/spi_command' into 'master'
fix(spi_master): fix the command field to make it more intuitive to use.

See merge request !1119
2017-08-28 10:29:56 +08:00
michael
0cb14f1648 fix(spi_dma_rx): add check to avoid using SPI half-duplex mode DMA with both MOSI and MISO phases. 2017-08-26 02:15:30 +08:00
michael
dd1e6ea296 typo(spi_master): fix the definition of `SPI_DEVICE_BIT_LSBFIRST`.
also fix the documentation of spi_device_transmit.
2017-08-26 02:04:37 +08:00
Wang Jia Lin
f1ecffb46c Merge branch 'bugfix/touch_pad_driver' into 'master'
driver(touch): fix bug and add more features

See merge request !1056
2017-08-23 19:12:39 +08:00
Ivan Grokhotkov
2861f3e88e Merge branch 'bugfix/spi_dma_align' into 'master'
fix(spi_dma): fix the receive error with RX DMA start with non-aligned address.

See merge request !1112
2017-08-22 23:39:53 +08:00
Wangjialin
842caaab21 driver(touch): fix bug and add more features
1. add sens_struct.h
2. add definition of RTCCNTL and RTCIO
3. modify touch pad examples
4. update example code.
5. add comments add option in menuconfig
6. fix issue that pad index 8 and 9 are mismatched
7. add touch_pad_read_filtered() api to get value filtered by iir filter
8. modify touch pad isr func
9. Make the items in perihperal.ld in the sequence of address
10. delete Kconfig for touch pad
11. add touchpad filter APIs to adjust the filter
12. add touch_pad into index.rst
13. add touch_pad in Doxyfile
14. add touch_pad.rst
2017-08-22 21:21:39 +08:00
michael
4c9754726f fix(spi_master): fix the command field to make it more intuitive to use. 2017-08-21 20:37:57 +08:00
michael
a01db5569c fix(spi_dma): fix the receive error with RX DMA start with non-aligned address. 2017-08-18 10:14:49 +08:00
Ivan Grokhotkov
6baf8195ee sdmmc: add support for high speed (HS) mode
By default SD cards are initialized in default speed (DS) mode. Enabling
HS mode requires SWITCH_FUNC command to be sent twice: first time to
query if the card supports switching to HS mode, second time to perform
the switch.

This change implements SWITCH_FUNC command and adds the procedure to
switch to HS mode.
2017-08-16 18:59:04 +08:00
Ivan Grokhotkov
f908425b13 sdmmc: introduce is_app_cmd flag, check it along with opcode
‘make_hw_cmd’ function checks opcodes in a few cases. Comparing opcode
does not tell the whole story, because for some SD commands there is are
APP commands with the same opcodes. This change introduces a flag which
indicates whether the next command is going to be an APP command.
The check for APP_SET_BUS_WIDTH command is updated to use this flag.
This fixes a bug with an unexpected STOP_TRANSMISSION command sent after
SWITCH_FUNC command, which has opcode 6, same as APP_SET_BUS_WIDTH.
2017-08-16 18:59:04 +08:00
Ivan Grokhotkov
e6258ac6cb sdmmc: don’t flip word order in MMC_RSP_BITS
MMC_RSP_BITS helper function had a hack that it flipped word order in
the response, assuming that response size is 4 words. This hack does not
work for responses which are not 4 words long (such as the SWITCH_FUNC
response, which is 64 words long).

This change removes the hack and the matching word order reversal code
in sdmmc driver.
2017-08-16 18:59:04 +08:00
Ivan Grokhotkov
159a2d01d1 Merge branch 'bugfix/spi_dma' into 'master'
bugfix(spi_master): fix several issues when using RX DMA

See merge request !1006
2017-08-16 18:55:25 +08:00
Nilay Sheth
0eb59844bb bugfix(driver): fix RMT issues from github
1. Rename api from rmt_get_ringbuf_handler to rmt_get_ringbuf_handle (Github Issue #274)
2. doxygen param rename
3. change API rmt_wait_tx_done to specify maximum waiting time
4.Change return type of rmt_wait_tx_done API from bool to esp_err_t
5. update doc
2017-08-15 17:23:51 +08:00
michael
ed1d084aea fix(spi_master): make the address field more intuitive to use.
The address field should be placed at the highest bits of address and slv_wr_status registers. Instead of breaking the address into two parts and fill in each register, move the address to the highest bits and write to the registers respectively.

Breaking change: if you fill-in the SPI address filed in a previous version in some way and it works correctly, you still have to rewrite the address, in a more intuitive way.
2017-08-15 14:49:31 +08:00
michael
366e4397e9 fix(spi_dma_rx): fixed the invalid argument issue in full-duplex mode.
force rxlength=length and mosi=1 and inlink.start=1 on in full-duplex mode.
set rxlength > length is forbidden in full-duplex mode.

TW#12609, TW#14240, https://www.esp32.com/viewtopic.php?f=13&t=2519
2017-08-14 17:25:30 +08:00
michael
227b011f6a fix(spi_master): fix SPI master, now able to transfer more than 32 bytes in non-DMA-accessable area.
apply for internal space to hold these data.
use DMA when it's enabled, no matter long or short.

TW#12226, github#551
2017-08-14 17:19:57 +08:00
Angus Gratton
8f44efc619 Merge branch 'bugfix/ledc_fade_divided_by_zero' into 'master'
bugfix(ledc): fix integer divided by zero in function ledc_set_fade_with_time

See merge request !1048
2017-08-14 13:52:36 +08:00
Ivan Grokhotkov
b260f6cb25 Merge branch 'bugfix/sdmmc_unaligned_write' into 'master'
sdmmc: fix reads/writes to/from unaligned buffers

See merge request !1071
2017-08-08 02:55:13 +08:00
Ivan Grokhotkov
dfda0fa67b Merge branch 'feature/add_gpio_drive_capability' into 'master'
feature(gpio): add APIs to set and get pad drive capability.

See merge request !1010
2017-08-07 17:21:42 +08:00
Ivan Grokhotkov
512898edee sdmmc: fix reads/writes to/from unaligned buffers
SDMMC hardware treats all buffers as aligned, and ignores 2 LSBs of
addresses written into DMA descriptors. Previously SDMMC host driver
assumed that data buffers passed from SDDMC command layer would be
aligned. However alignment checks were never implemented in the command
layer, as were the checks that the buffer coming from the application
would be in DMA capable memory. Most of the time this was indeed true.
However in some cases FATFS library can pass buffers offset by 2 bytes
from word boundary. “DMA capable” restriction may be broken if pSRAM
support is used.

This change adds buffer checks to the SDMMC host driver (alignment and
DMA capability), so that the host layer will error out for incompatible
buffers. In SDMMC command layer, a check is added to read and write
functions. If an incompatible buffer is passed from the application, new
buffer (512 bytes size) is allocated, and the transfer is performed
using {READ,WRITE}_SINGLE_BLOCK commands.
2017-08-01 03:15:11 +08:00
Jeroen Domburg
9314bf0d37 Merge branch 'bugfix/spi_change_host' into 'master'
fix(spi_master): fix the bug that VSPI no respond when host changed from HSPI to VSPI, and vice versa.

See merge request !997
2017-07-31 18:33:36 +08:00
Ivan Grokhotkov
002f38fa8f Merge branch 'feature/sdspi_driver' into 'master'
SD SPI mode driver

This MR adds functionality to support SD cards connected via SPI interface.
Additionally, two bugs are fixed:
- Definition of `SPI_TRANS_MODE_DIOQIO_ADDR` in spi_master driver
- SD card probing frequency was 4000kHz instead of 400kHz as required by the standard

See merge request !727
2017-07-26 13:51:37 +08:00
qianyicheng
acec9b9d35 bugfix(ledc): fix integer divided by zero in function ledc_set_fade_with_time 2017-07-21 19:06:44 +08:00
michael
99769f0b00 fix(spi_master): fix the bug that VSPI no respond when host changed
from HSPI to VSPI, and vice versa.

fix the SPI control bits written wrong in the headers.

TW#12123, Github#477
2017-07-21 14:50:17 +08:00
Wangjialin
9d466de235 bugfix(uart): fix signal glitch on tx pin
gpio_matrix_out function will set output enable for GPIO, seems in gpio_matrix_out there will be a short moment that the chip will output GPIO level.
So we can set GPIO as high before gpio_matrix_out function.
2017-07-20 14:34:11 +08:00
Dmitry Yakovlev
e5bb45f381 driver: SD protocol driver for SPI peripheral 2017-07-20 13:43:07 +08:00
Ivan Grokhotkov
5f8785eaec sdmmc: add support for SPI protocol commands 2017-07-20 13:34:21 +08:00
Ivan Grokhotkov
3b96771feb sdmmc: fix probing clock frequency
Probing clock frequency should be 400kHz, not 4MHz.
2017-07-20 13:34:21 +08:00
Ivan Grokhotkov
54dc350907 spi_master: fix duplicate bit mask for SPI_TRANS_MODE_DIOQIO_ADDR 2017-07-20 13:34:21 +08:00
Wangjialin
c30149e4bd feature(gpio): add APIs to set and get pad drive capability. RTC pads use RTC registers to contol drive capability. 2017-07-19 11:23:41 +08:00
Ivan Grokhotkov
7fc25f18d2 Merge branch 'feature/enable_brownout_detector' into 'master'
Enable brownout detector

See merge request !811
2017-07-13 11:40:37 +08:00
Angus Gratton
8d7074ed5c soc: Move esp_ptr_dma_capable() function to soc_memory_layout.h 2017-07-10 17:46:03 +08:00
Angus Gratton
71c70cb15c heap: Refactor heap regions/capabilities out of FreeRTOS
Remove tagged heap API, rename caps_xxx to heap_caps_xxx

Also includes additional heap_caps_xxx inspection functions.
2017-07-10 17:46:03 +08:00
Ivan Grokhotkov
cbe23147bf driver/rtc: add support for attaching handlers to RTC_CNTL interrupts 2017-07-10 17:21:49 +08:00
Ivan Grokhotkov
1194f59e1a Merge branch 'bugfix/i2s_return_err_code' into 'master'
i2s driver: return error code if register isr error

See merge request !829
2017-07-06 11:25:40 +08:00
Wangjialin
40fd9db55d bugfix(uart): fix bugs reported from github
1. uart_set_line_inverse API issue, https://github.com/espressif/esp-idf/issues/673
2. tx buffer length issue, https://github.com/espressif/esp-idf/issues/710
2017-06-27 16:41:59 +08:00
Angus Gratton
17747b3358 gpio driver: Clear GPIO matrix output config when setting pin as input
Otherwise, if a non-GPIO peripheral has been routed to this pin
(as an output), output driver can remain enabled.
2017-06-26 12:47:08 +10:00
James Sarrett
b772024699 send bus initialization bits before MMC_GO_IDLE_STATE command to initialize card after poweron 2017-06-22 11:08:47 +08:00
krzychb
05f56d1d25 [TW#13322] Typo in documentation, fixes #694 2017-06-19 22:42:22 +02:00
Nilay
769944b067 PCNT: fix for pcnt_set_pin API, it can now use all pcnt channels 2017-06-16 11:18:00 +05:30
Nilay
f50b5481fa PCNT: Fixed pcnt_counter_clear, Pulse Count now able to resume after API call 2017-06-16 11:11:52 +05:30
Jiang Jiang Jian
aefde1517d Merge branch 'bugfix/i2c_delete_interrupt_race' into 'master'
i2c driver: When deleting, disable interrupts before freeing data structures

See merge request !836
2017-06-14 17:47:22 +08:00
Tuan PM
f91715438a i2s: return error code if register isr error, resolve #587 (github)
set p_i2s_obj = NULL when return error
2017-06-13 14:28:47 +07:00
Angus Gratton
c77b699463 rmt driver: Manage driver interrupt handler based on which channels are enabled
Previously the first call to rmt_driver_uninstall() would remove the interrupt handler,
even if other channels still had the driver installed.

Adds an OS-level lock to control concurrent registration/deregistration of channels.
2017-06-09 16:11:21 +10:00
Angus Gratton
4b58cc12cd rmt driver: When deleting, disable interrupt before freeing data structures
Fixes potential race if RMT interrupt happens while deregistering (unlikely
due to timing of taking semaphore tx_sem, but still possible.)
2017-06-08 16:14:51 +10:00
Angus Gratton
a89e93fc3d i2c driver: When deleting, disable interrupts before freeing data structures
Fixes a potential race if I2C interrupt occurs while driver is being delted.
2017-06-08 15:57:31 +10:00
Angus Gratton
1cbdb35e1e Merge branch 'bugfix/i2s_channel_setting' into 'master'
bugfix(i2s): fix error when changing channel number in i2s_set_clk function

See merge request !784
2017-06-06 14:40:43 +08:00
jack
fc130fba86 fix bug that files missing commit in MR 773 2017-05-31 19:37:39 +08:00
Wangjialin
f68c5baea6 bugfix(i2s): fix error when changing changel number in i2s_set_clk function 2017-05-23 19:32:10 +08:00
krzychb
30edcca1fb docs: Generate Doxygen directives for API documentation
This is to resolve issue reported in https://github.com/espressif/esp-idf/issues/130.
2017-05-19 18:26:02 +02:00
zelll
0b447db8d8 uart driver: Move UART_EVENT_MAX to last
Merges https://github.com/espressif/esp-idf/pull/594
2017-05-17 11:36:13 +10:00
Konstantin Fedorov
31de20a217 docs: Error in gpio_install_isr_service() description
Merges https://github.com/espressif/esp-idf/pull/564
2017-05-17 11:04:17 +10:00
Ivan Grokhotkov
98e15df7f6 examples: add ULP ADC example 2017-05-16 13:15:02 +08:00
Jiang Jiang Jian
a6608648db Merge branch 'driver_merge_tmp/mcpwm' into 'master'
feature: Motor Control PWM(mcpwm) driver and examples



See merge request !698
2017-05-12 18:21:38 +08:00
Wangjialin
1f055d28b8 Driver update: I2S pdm and built-in DAC
1. Modify I2S DAC built-in mode settings
2. Add I2S pdm mode
3. Correct I2S signal index in full-duplex mode
4. Modify dac output function
5. Add dac pad init functions
6. Modify DAC documentation
7. Add i2s_set_dac_mode API
2017-05-12 16:21:02 +08:00
Kewal M Shah
2008f4d88c feature: add Motor Control PWM(mcpwm) driver
1. Name change from chopper to carrier, block diagram update, minor changes to example codes
2. mcpwm_reg.h changed, brought uniformity in comments, worked on suggestions, duty to accept float. Some name changes!
3. Minor readme changes and Indetation
4. Minor change:  move mcpwm_reg.h and mcpwm_struct.h to new path
5. Minor change: addition of BLDC example code and Readme
6. Name changed from epwm to mcpwm
7. Improve the reg name in mcpwm_struct.h
8. Name change chopper>carrier, deadband>deadtime
2017-05-12 15:47:59 +08:00
Jiang Jiang Jian
c518325385 Merge branch 'bugfix/dualcore_dport' into 'master'
component/esp32 : fix dualcore bug

1. When dual core cpu run access DPORT register, must do protection.
2. If access DPORT register, must use DPORT_REG_READ/DPORT_REG_WRITE and DPORT_XXX register operation macro.

See merge request !742
2017-05-10 11:27:01 +08:00
Tian Hao
26a3cb93c7 component/soc : move dport access header files to soc
1. move dport access header files to soc
2. reduce dport register write protection. Only protect read operation
2017-05-09 18:06:00 +08:00
Tian Hao
f7e8856520 component/esp32 : fix dualcore bug
1. When dual core cpu run access DPORT register, must do protection.
2. If access DPORT register, must use DPORT_REG_READ/DPORT_REG_WRITE and DPORT_XXX register operation macro.
2017-05-08 21:53:43 +08:00
Jeroen Domburg
9962cc9c9f Fix out-of-bounds on dmaworkaround_channels_busy 2017-05-08 16:11:46 +08:00
Jeroen Domburg
8af3fe4e84 Warn against and check for non-DMA-capable pointers being passed to SPI when DMA is used 2017-05-05 12:28:03 +08:00
devsaurus
530c3ca05c components/driver/spi_master: free dma descriptors
Signed-off-by: Jeroen Domburg <jeroen@espressif.com>
2017-05-05 11:13:42 +08:00
Angus Gratton
7db85a386a Merge branch 'bugfix/i2s_driver' into 'master'
I2S driver - fixed support for 24 and 32-bits, fixed tx/rx at the same time

- Modify sample can test with 24, 32-bits audio
- Add i2s sample README
- simply i2s_push function
- change sample rates, bits per sample, channel on fly

See merge request !483
2017-04-28 08:00:07 +08:00
krzychb
1a19747678 Getting started guides 2017-04-27 19:51:42 +02:00
Jeroen Domburg
9134c13c73 Fix SPI master CI test 2017-04-27 14:50:02 +08:00
Jeroen Domburg
04b901e629 SPI: More MR issues fixed, style fixup 2017-04-27 11:49:04 +08:00
Jeroen Domburg
bf0c32364a SPI: Also check SPI_TRANS_USE_[T|R]XDATA when decifding to turn on MOSI/MISO. Fixes https://github.com/espressif/esp-idf/issues/488 2017-04-27 11:49:04 +08:00
Jeroen Domburg
881a90b8ab SPI: SPI master clock calculation: n has a minimum of 2 to allow for both a low and a high cycle. Fixes https://github.com/espressif/esp-idf/issues/491 2017-04-27 11:49:04 +08:00
Jeroen Domburg
cecb846450 SPI: Fix comment for 3wire, make GPIO pins GPIO_MODE_INPUT_OUTOUT. Fixes https://github.com/espressif/esp-idf/issues/533 2017-04-27 11:49:04 +08:00
Jeroen Domburg
4c06dca15c SPI: Small fixes according to MR comments 2017-04-27 11:49:04 +08:00
Jeroen Domburg
e9c372bc2d SPI: Split common SPI stuff out of master driver; add slave driver; add workaround for DMA issue. 2017-04-27 11:49:04 +08:00
Tuan PM
fc1ee2666a I2S: fixed support for 24 and 32-bits, fixed tx/rx at the same time and others in log:
Add support 24, 32 bits

@jxmao optimize i2s_zero_buffer

@jxmao correct config support slave mode

@jxmao correct setup pin support tx/rx at the same time

Enhance pin power

@jxmao add dynamic change number of channels

remove nvs_init

remove start log and enhance power pin setup

using enum for i2s_channel and i2s_bits_per_sample, return ESP_ERR_INVALID_ARG when check params

validate i2s_bits_per_sample and channel

check tx & rx buffer before fill zero

remove checking channel as @jxmao suggest

limit dma buffer

modify i2s pin back to gpio mux before configure gpio matrix, resolve github issue #512

Add support 24, 32 bits

reduce push function

Modify sample can test with 24, 32-bits

Add i2s sample README

Fixed i2s_set_clk got reset sometime

can changes bit-wide while running

Fix sample rate calculation for DAC mode from @jeroen

modify example can change bits per sample every 5 seconds

cleanup

add comment for bytes_per_sample

update as @angus suggestions

Add i2s_set_clk api

I2S driver bug fixed as following log:

@jxmao optimize i2s_zero_buffer

@jxmao correct config support slave mode

@jxmao correct setup pin support tx/rx at the same time

Enhance pin power

@jxmao add dynamic change number of channels

remove nvs_init

remove start log and enhance power pin setup

using enum for i2s_channel and i2s_bits_per_sample, return ESP_ERR_INVALID_ARG when check params

validate i2s_bits_per_sample and channel

check tx & rx buffer before fill zero

remove checking channel as @jxmao suggest

limit dma buffer

modify i2s pin back to gpio mux before configure gpio matrix, resolve github issue #512

limit dma buffer to 4092

change gpio_matrix_*_check to inline function, remove some comments and rename test_i2s function to setup_triangle_sine_waves

for change commit title
2017-04-27 10:00:10 +07:00
Ivan Grokhotkov
fdfa7e6cc2 Merge branch 'bugfix/sdmmc_timeout' into 'master'
sdmmc: handle card removal when CD is not used

When SD card is removed during transaction, SDMMC peripheral can report
a range of errors, such as timeouts, CRC errors, start/end bit errors.
Under normal conditions (card is inserted), SDMMC peripheral also generates
command done or data done interrupts. When the card is removed, such
interrupts may not be always generated.

This change fixes handling of timeout interrupts and SBE interrupts.
It also adds a one second timeout into the event processing loop. This
timeout allows applications to recover in cases when the SDMMC peripheral
doesn’t generate command/data done event on card removal.

Fixes TW11592.

See merge request !678
2017-04-25 16:27:12 +08:00
Angus Gratton
fd3ef4cdfe Merge branch 'bugfix/github_fixes' into 'master'
Various fixes from Github

Some one-line fixes from Github PRs.

See merge request !689
2017-04-21 12:27:32 +08:00
Angus Gratton
94a61389ff Merge branch 'bugfix/driver_const_params' into 'master'
components/driver: 'const' all config calls.

Merges PR #519 https://github.com/espressif/esp-idf/pull/519

See merge request !687
2017-04-21 12:25:15 +08:00
Michael Kellner
eeb0aaa09e spidriver: Display length errors correctly
SPI transfer length is bits, not bytes, so the error should indicate bits. Also, there are separate lengths for rx and
tx (confusingly named rxlength and length... if rxlength is 0, length is used). The code checks the tx length for the
rx, so it never validates rxlength.

Originally contributed as part of #511 https://github.com/espressif/esp-idf/pull/511
2017-04-21 11:03:07 +10:00
Jonathan Kaufmann
bf82b441ae Fixed bug in ledc_set_fade_with_step where returned while holding critical section.
Merges PR #515 https://github.com/espressif/esp-idf/pull/515
2017-04-21 11:03:07 +10:00
Ivan Grokhotkov
49848eaed5 sdmmc: handle card removal when CD is not used
When SD card is removed during transaction, SDMMC peripheral can report
a range of errors, such as timeouts, CRC errors, start/end bit errors.
Under normal conditions (card is inserted), SDMMC peripheral also generates
command done or data done interrupts. When the card is removed, such
interrupts may not be always generated.

This change fixes handling of timeout interrupts and SBE interrupts.
It also adds a one second timeout into the event processing loop. This
timeout allows applications to recover in cases when the SDMMC peripheral
doesn’t generate command/data done event on card removal.
2017-04-19 12:50:51 +08:00
Michel Pollet
349a77cb55 components/driver: 'const' all config calls.
Some were, some weren't. They all could/should be.

Signed-off-by: Michel Pollet <buserror@gmail.com>
2017-04-13 18:33:33 +01:00
Wangjialin
315aa1fcd8 Fix uart tx function block issue
To enable tx empty interrupt each time the tx ringbuffer get filled, so that tx function will not block if tx data length is larger than tx ringbuffer size.
Reported from customer of Audio team.
2017-04-12 16:57:37 +08:00
devsaurus
ae94fe04ef components/driver/rmt: Add const qualifier for config and tx data. 2017-04-11 18:55:56 +08:00
devsaurus
cc164b0dc3 fix rmt_set_tx_thr_intr_en(): check evt_thresh only in enable path 2017-04-11 18:55:56 +08:00
shinyquagsire23
8e89a136e1 Fix impossible check in uart_set_line_inverse 2017-04-11 18:55:56 +08:00
Jeroen Domburg
76295c7a13 Fix timing adjustment needed for higher speeds of SPI master bus. 2017-03-28 11:31:59 +08:00
Ivan Grokhotkov
6ad0a157e3 driver/rtc: add APIs to enable/disable hold function 2017-03-24 10:11:13 +08:00
Angus Gratton
b9a06e68dd Merge branch 'bugfix/minor_fixes' into 'master'
Minor fixes and PRs cherry-picked from Github



See merge request !602
2017-03-23 17:57:28 +08:00
Angus Gratton
64f26be053 rmt driver: Remove accidental ESP_LOGE in isr handler
Closes #451 https://github.com/espressif/esp-idf/issues/451
2017-03-22 14:33:22 +08:00
Angus Gratton
c30bba8c63 rmt driver: Fix parameter & description of rmt_driver_install
Closes #187 https://github.com/espressif/esp-idf/issues/187
2017-03-22 12:30:34 +08:00
Ivan Grokhotkov
9254d2846f Merge branch 'feature/ledc_low_speed_channels' into 'master'
add ledc low speed channels

1. add low speed channels
2. modify example code.

See merge request !490
2017-03-21 15:35:40 +08:00
Ivan Grokhotkov
91d35f01f2 Merge branch 'bugfix/i2c_spikes_on_master_init_#393_from_github' into 'master'
bugfix: I2C spikes on master init

Fix I2C spikes on master init.
Before I2C io init, set high level on SDA/SCK IOs.

Fixes https://github.com/espressif/esp-idf/issues/393

See merge request !593
2017-03-21 15:09:16 +08:00
Ivan Grokhotkov
e4e8a903c3 Merge branch 'bugfix/touch_pad_read_takes_too_much_time' into 'master'
modify touch pad read function

The touch pad read function taks too much time within spin lock waiting for the "done bit". (about 7.6ms as we tested)
So we try to use a mutex on the touch read function and any other functions might change the "done bit".

See merge request !543
2017-03-21 14:46:30 +08:00
Wangjialin
1ad68de8b8 bugfix: I2C spikes on master init #393 from github
Fix I2C spikes on master init.
This issue is reported from https://github.com/espressif/esp-idf/issues/393
Before I2C io init, set high level on SDA/SCK IOs.
2017-03-19 17:05:07 +08:00
Wangjialin
94b91ee4af bugfix: i2c driver not working in 'RELEASE' configuration
This issue is reported from https://github.com/espressif/esp-idf/issues/304.
We found that when we operate the hw command registers in I2C struct, sometimes the behaviour would be different in DEBUG/RELEASE optimisation level:

The code looks like this:
I2C[i2c_num]->command[p_i2c->cmd_idx].byte_num -= 0;

In DEBUG configuration:
I2C[i2c_num]->command[p_i2c->cmd_idx].byte_num -= 0;
400f3ab0:    3388          l32i.n    a8, a3, 12
400f3ab2:    14c882            addi    a8, a8, 20
400f3ab5:    a08840            addx4    a8, a8, a4
400f3ab8:    0020c0            memw
400f3abb:    2898          l32i.n    a9, a8, 8
400f3abd:    0020c0            memw
400f3ac0:    28b8          l32i.n    a11, a8, 8
400f3ac2:    74a090            extui    a10, a9, 0, 8
400f3ac5:    00af92            movi    a9, 0xffffff00
400f3ac8:    109b90            and    a9, a11, a9
400f3acb:    2099a0            or    a9, a9, a10
400f3ace:    0020c0            memw
400f3ad1:    2899          s32i.n    a9, a8, 8

In RELEASE configuration:
I2C[i2c_num]->command[p_i2c->cmd_idx].byte_num -= 0;
400f2ba2:    580572            l8ui    a7, a5, 88
400f2ba5:    747070            extui    a7, a7, 0, 8
400f2ba8:    0020c0            memw
400f2bab:    584572            s8i    a7, a5, 88

Looks like the compiler will make it a 8bit operation after optimisation.
But the register value changes from 0x901 to 0x101.
After this 8-bit optimisation, the 11th bit changed from 1 to zero, which caused this error.

We are still trying to find out why that happens, because there might be some risk when operating the register struct.
This is a workaround to avoid "-=" operation on I2C register struct fields.
2017-03-19 16:09:44 +08:00
Wangjialin
7670e93639 Feature: add ledc low speed channels
1. Add low speed channels for LEDC module.
2. Improve fade object allocate mechanism.
3. Improve ledc example, add 2 low speed channels in example.
4. Remove debug code
5. Improve the register bit field name of slow clock.
2017-03-17 17:26:30 +08:00
Wangjialin
5d5b625d0e bugfix: fix uart 2-stop-bit error
Fix uart data bug when stop-bit is set as 2-bit mode.
This is just a software workaround.
2017-03-12 11:38:14 +08:00
Chu Shu Chen
194d4e9ffd fix(touch_pad): modify touch pad read function and touch_pad_deinit
The touch pad read function taks too much time within spin lock waiting for the "done bit". (about 7.6ms as we tested)
So we try to use a mutex on the touch read function and any other functions might change the "done bit".
2017-03-11 11:42:44 +08:00
Angus Gratton
e7aea584f5 Merge branch 'bugfix/free_iram' into 'master'
uart driver: Remove ISR from IRAM



See merge request !486
2017-03-03 14:08:10 +08:00
Angus Gratton
3db4402f3c uart driver: Remove UART ISR handler from IRAM
Doesn't change example behaviour, as ISR wasn't being registered as
ESP_INTR_FLAG_IRAM.
2017-03-03 16:17:55 +11:00
Angus Gratton
6ee5a1e492 sdmmc: Use slot width as default slot_config width parameter, instead of 4
Ref #361 https://github.com/espressif/esp-idf/pull/361
2017-03-03 14:59:15 +11:00
Daniel Campora
c08a2871e6 sdmmc: Add width field to the slot config.
Therefore if the width is set to 1, you can choose to only
configure the CLK, DAT0 and CMD pins.

Merges #361 https://github.com/espressif/esp-idf/pull/361
2017-03-03 14:59:15 +11:00
Jeroen Domburg
e35ebbf813 Use THRESH_DMA_TRANS define everywhere, make code match "smaller or equal" description 2017-02-21 18:27:56 +08:00
Lourens Naudé
04f7d96623 Fix SPI read edges in spi_intr
Signed-off-by: Jeroen Domburg <jeroen@espressif.com>
2017-02-21 18:26:03 +08:00
Angus Gratton
4db4e28b6e uart driver docs: Remove references to setting interrupt number
Closes #185 https://github.com/espressif/esp-idf/issues/185
2017-02-20 10:39:29 +11:00
Angus Gratton
bfdfcbfaef docs: Add missing peripheral driver docs (ADC, DAC, RTC I/O, I2S) 2017-02-20 10:39:29 +11:00
Angus Gratton
21964a42fb rtc_gpio: Replace RTC_GPIO_IS_VALID_GPIO macro with inline function 2017-02-20 10:39:29 +11:00
Dermot Duffy
33500f2561 Add missing variable initialisation.
Signed-off-by: Jeroen Domburg <jeroen@espressif.com>
2017-01-25 21:41:45 +08:00
Jan Schmidt
ac412feb69 gpio: Attach gpio intr to the isr_server on the right core.
Make sure GPIO interrupts get attached to the core that
the ISR service routine is running on, otherwise they
don't arrive.
2017-01-20 14:56:59 +11:00
antti
f8b5c29346 esp32: add [ignore] tag to some unit test cases for CI
Add ignore tag on unit test cases that are not supported in CI yet
2017-01-18 17:08:20 +08:00
devsaurus
d8fb30c930 i2c: fix i2c_get_period name
rename i2s_get_period to i2c_get_period
2017-01-16 02:37:10 +08:00
Jeroen Domburg
356e01545c Add test for spi clock, fix corner cases) 2017-01-11 16:13:33 +08:00
Jeroen Domburg
daa2b7cbc9 n, h and l actually are 6-bit; they go from 1 to 64. 2017-01-11 14:13:37 +08:00
Jeroen Domburg
a98d07d650 Fix clock divider calculation 2017-01-11 13:01:48 +08:00
Jeroen Domburg
ee59fa75f4 Rename SPI Master IO pins to more common terminology, add better explanation to queue_length initialization value 2017-01-11 11:25:56 +08:00
Jeroen Domburg
5eb8eb3855 SPI master: rename transaction flags from SPI_* to SPI_TRANS_*, like the documentation says. Also add some explanation about the SPI signals in the documentation 2017-01-10 14:41:12 +08:00
Ivan Grokhotkov
edd924f273 sdmmc: add peripheral driver and protocol layer 2017-01-09 04:51:24 +08:00
Jeroen Domburg
23455de4c2 Add SPI Master driver, example, test and docs 2017-01-06 14:20:32 +08:00
Wang Jia Lin
ad1d4500f9 Merge branch 'feature/ledc' into 'master'
driver: ledc update

1. add fading functions.
2. clear up ledc.h
3. update api doc.
4. add ledc example

See merge request !347
2017-01-05 20:05:13 +08:00
Wangjialin
6b5e734901 driver: ledc - update fading functions, add example and doc
1. add fading functions.
2. clear up ledc.c and ledc.h
3. update api doc.
4. add ledc example
5. edit ledc.rst and add readme for example code.
6. add s_ prefix for static global values.
7. add mutex for fade functions
8. minor changes according to the comments.
2017-01-05 17:57:52 +08:00
Wangjialin
9c7cc86793 1. modify i2c_set_pin function
2. update example comments and other minor changes
3. rename API:  i2c_cmd_link_create/i2c_cmd_link_delete (+4 squashed commits)

Squashed commits:
[2e0ac3e] 1. coding style: add one space after condition key words.
2. modify i2c.h, use gpio_num_t instead of int, improve comments of return values
3. add i2c index in index.rst
4. add readme for i2c example
[4991d92] update i2c.doc
[88b672e] driver: i2c

1. add mux and spin lock to run in a thread-safe way.
2. modify example code
[4eb15fe] driver: i2c code

1. add i2c master code
2. add i2c slave code
3. add i2c example code
4. add DRAM_ATTR for I2C array
2017-01-03 00:57:19 +08:00
Tuan PM
5462d98e5a Add i2s driver 2016-12-29 17:29:14 +08:00
Wang Jia Lin
8bcd341fca Merge branch 'buffix/uart_frm_err_parity_err_mismatch' into 'master'
bugfix: uart event mismatch

Fix bug of uart frame error and parity error interrupt mismatch in driver code, which will cause the corresponding interrupt can not be cleared correctly, and will finally cause a interrupt watch dog.

See merge request !335
2016-12-29 13:15:48 +08:00
Ivan Grokhotkov
48c4a10827 Merge branch 'feature/gpio_intr_function' into 'master'
GPIO driver: add per-pin interrupt handlers

1. add ISR handler apis so that users of different layers can hook their own isr handler on different GPIO.
    Audio project has different software layers, they need different gpio isr handler for layer instead of processing all GPIO interrupts in one handler.
    If this kind of calling a handler from isr is not proper, please kindly point out.
2. add gpio example code.
3. update gpio doc.

See merge request !345
2016-12-29 12:36:04 +08:00
Wangjialin
ade7ee2092 gpio_driver: add per-pin interrupt handlers
1. add ISR handler apis so that users of different layers can hook their own isr handler on different GPIO.
    Audio project has different software layers, they need different gpio isr handler for layer instead of processing all GPIO interrupts in one handler.
    If this kind of calling a handler from isr is not proper, please kindly point out.
2. add gpio example code.
3. improve gpio.rst
4. add readme for gpio example

Squashed commits:
[278e50f] update: GPIO
1. coding style, add a space between conditional or loop keyword and an opening paren.
2. modify some return value and doc
3. use printf in example code
Squashed commits:
[efb23bb] minor change of comment
2016-12-29 11:16:32 +08:00
Angus Gratton
1c08cf2f79 Merge branch 'bugfix/uart_intr_config' into 'master'
uart_intr_config should return ESP_OK on success

Github PR #170 https://github.com/espressif/esp-idf/pull/170

See merge request !339
2016-12-29 05:36:26 +08:00
Angus Gratton
9496fda662 RMT driver: Rename rmt_set_evt_intr_en to rmt_set_tx_thr_intr_en
Closes github #115: https://github.com/espressif/esp-idf/issues/115
2016-12-28 10:17:56 +11:00
Angus Gratton
948a2ba23a uart driver: Remove invalid UART_BITRATE_115200 enum from example
Closes github #92 https://github.com/espressif/esp-idf/issues/92
2016-12-28 10:17:56 +11:00
Angus Gratton
6395081503 uart driver: Set type of uart_driver_install queue param
Closes github #91 https://github.com/espressif/esp-idf/issues/91
2016-12-28 10:17:56 +11:00
Angus Gratton
45571b3c38 LEDC driver: Use ledc_channel_t for all channel arguments
Closes github #54: https://github.com/espressif/esp-idf/issues/54
2016-12-28 10:17:56 +11:00
Angus Gratton
41eca2c67b RMT: Don't require carrier_freq_hz to be non-zero if carrier_en unset
Closes github #123 https://github.com/espressif/esp-idf/issues/123
2016-12-28 10:17:56 +11:00
Angus Gratton
ff1fa8a323 gpio driver: Fix gpio_set_level validation of gpio_num argument
Closes #125 https://github.com/espressif/esp-idf/issues/125
2016-12-28 10:17:56 +11:00
Wangjialin
794f7dd294 bugfix: uart event mismatch
1. Fix bug of uart frame error and parity error interrupt mismatch in driver code, which will cause the corresponding interrupt can not be cleared correctly, and will finally cause a interrupt watch dog.
2. Add gpio pull-up for rx pin and cts pin.
2016-12-22 14:08:48 +08:00
Wangjialin
9dbdab5c9a driver: uart
1. add uart rx buffer data length API
2. add uart pattern detect event
3. add uart example code
4. modify uart_isr_register
5. modify uart.rst
6. fix parity err event and frame err event.
2016-12-21 11:55:53 +08:00
Jeroen Domburg
4854dcf0eb Get rid of old interrupt example code 2016-12-19 18:48:08 +08:00
Wangjialin
b00b75db7e driver: sigma-delta
1. add sigma-delta code and example.
2. add gpio output signal in io matrix.

Squashed commits:
[a25e7d4] minor changes for doc
[6a03a1e] minor changes on comments and doc.
[97dd9e4] Add doc.
update index.rst
change example index
2016-12-18 17:20:17 +08:00
Deomid Ryabkov
2c165aba36 uart_intr_config should return ESP_OK on success 2016-12-16 22:27:45 +00:00
Ivan Grokhotkov
609d852834 deep sleep: power down RTC peripherals in EXT1 sleep 2016-12-16 14:30:27 +08:00
Ivan Grokhotkov
35115885c5 deep sleep: add API to control power down 2016-12-16 14:30:27 +08:00
Ivan Grokhotkov
3b854fe46a deep sleep: implement wake up using ULP, EXT0, EXT1 sources
This adds the following APIs to enable various wakeup sources:
- esp_deep_sleep_enable_timer_wakeup
- esp_deep_sleep_enable_ulp_wakeup
- esp_deep_sleep_enable_ext0_wakeup
- esp_deep_sleep_enable_ext1_wakeup

And an API to start deep sleep:
- esp_deep_sleep_start
2016-12-16 14:30:27 +08:00
Ivan Grokhotkov
71daf49e39 driver/rtc_io: improve header comments
Fix descriptions of return values, fix typos, use upper case for abbreviations.
2016-12-16 14:30:27 +08:00
Jeroen Domburg
1037a50abe Convert DOS line ends to Unix line ends in drivers 2016-12-15 09:45:40 +08:00
Jeroen Domburg
3ed16758c0 Update examples in uart.h 2016-12-15 09:44:21 +08:00
Ivan Grokhotkov
1c60a0450e Merge branch 'bugfix/driver_cleanup_log' into 'master'
drivers: remove file paths from log statements

Function name and error string are usually sufficient to find the place which has triggered an error. 

`__FILE__` macro generates a string which has absolute file name (with our build system), which add many long strings to the program binary.

Also change log tags to lower case to match style used elsewhere.

Fixes https://github.com/espressif/esp-idf/issues/126

See merge request !282
2016-12-12 10:15:25 +08:00
Ivan Grokhotkov
f504e23d0f bootloader, driver/rtc: fix warnings about unused functions 2016-12-09 15:47:32 +08:00
Jeroen Domburg
baa6a477c5 Fix example code, add chapter to docs about interrupts and multicore issues 2016-12-08 14:42:00 +08:00
Jeroen Domburg
cb9ef19d3b Also add intr_alloc magic to rtc code 2016-12-08 12:57:57 +08:00
Jeroen Domburg
2c34ab3374 Mark some interrupts that are now allocated dynamically as free, add int handle param documentation, add local ints test 2016-12-08 12:39:33 +08:00
Jeroen Domburg
ae8c37e0b6 Add disabling/enabling of shared interrupt, add testcase for interrupts 2016-12-08 12:39:33 +08:00
Jeroen Domburg
32fa94935d Changes according to merge request 2016-12-08 12:39:33 +08:00
Jeroen Domburg
655fd2986a Add interrupt allocation scheme / interrupt sharing. Also modifies drivers and examples. Also allows interrupts
to be marked specifically as having a handler that's all in IRAM.
2016-12-08 12:39:33 +08:00
Ivan Grokhotkov
a1542421c0 Merge branch 'bugfix/pcnt_driver' into 'master'
Fixing some syntax errors in pcnt



See merge request !278
2016-12-08 10:48:05 +08:00
Angus Gratton
81e721ebcb Merge branch 'bugfix/rmt_debug_newline' into 'master'
Removal of spurious newline character in debug statement

There was a debug statement in the code that included an additional newline character that wasn't needed.

From github PR: https://github.com/espressif/esp-idf/pull/124

See merge request !291
2016-12-08 10:05:11 +08:00
Neil Kolban
dbc5edac7e Removal of spurious newline character in debug statement
There was a debug statement in the code that included an additional newline character that wasn't needed.
2016-12-07 13:57:09 -08:00
Chu Shu Chen
b1db2721dc driver: add rtc module and bugfix gpio32 gpio33
feature(rtc_module):add rtc module

1. add rtc io control API (pull,output and input)
2. add touch pad API (touch pad read and interrupt)
3. add adc1 API (the max width is 12 Bits and support attenuation)
4. add hall sensor API (support hall sensor read )
5. add dac API (the width is 8 Bits)

bugfix(gpio):gpio32 and gpio33 can not output and input

the gpio32 and gpio33 is initialize by librtc.a,and gpio_config not initialize the gpio as
digital gpio.they can not output and input,when users use gpio32 or gpio33.And there are some problems
about others driver ,when they use gpio32 or gpio33 as  matrix.
2016-12-07 15:56:13 +08:00
Ivan Grokhotkov
0dff9ed79d drivers: remove file paths from log statements
Function name and error string are usually sufficient to find the place which has triggered an error. __FILE__ macro generates a string which has absolute file name (with our build system), so there is a lot of long strings present in the program because of that.

Fixes https://github.com/espressif/esp-idf/issues/126
2016-12-07 12:01:54 +08:00
me-no-dev
3cd9cb8911 Fix comment in the header 2016-12-06 02:10:35 +02:00
me-no-dev
2dbae95a7e Fix wrong assignment of channel and unit in pcnt_unit_config 2016-12-06 01:11:32 +02:00
Wang Jia Lin
58d902eb78 Merge branch 'driver_merge_tmp/merge_timer' into 'master'
driver: timer

1. add timer driver code
2. add timer example code
3. replace api for enable interrupt in task_wdt.c

See merge request !237
2016-11-25 10:52:40 +08:00
Angus Gratton
7a93422089 Merge branch 'bugfix/ledc_divider' into 'master'
ledc: fix reported error when div_param == 256

Whenever bit_num and freq_hz are such that div_param == 256, the code would flag that as an error.
In fact, value 256 of div_param was a valid one (HW requires that div_param >= 1.0, when interpreted as a Q10.8 fixed point value).

Changed the if statements a bit to make the logic clearer, and added more descriptive error messages.

Also added missing error for the unimplemented case of low speed mode.

Reported in https://github.com/igrr/esp32-cam-demo/issues/2

See merge request !247
2016-11-25 10:11:33 +08:00
Wangjialin
a5ad8090cf Merge branch 'master' into driver_merge_tmp/merge_timer
# Conflicts:
#	docs/index.rst
2016-11-25 01:07:19 +08:00
Wang Jia Lin
35ae2cd1a5 Merge branch 'driver_merge_tmp/merge_pcnt' into 'master'
driver: PCNT

1. add PCNT module in periph_ctrl.c/.h
2. add description of PCNT status in pcnt_struct.h
3. add PCNT driver code
4. add PCNT example code.

See merge request !229
2016-11-25 00:41:16 +08:00
Ivan Grokhotkov
79482bbee7 uart: use same argument names in get/set functions
https://github.com/espressif/esp-idf/issues/105
2016-11-24 13:56:18 +08:00
Ivan Grokhotkov
f60e54497c ledc: fix reported error when div_param == 256
Whenever bit_num and freq_hz are such that div_param == 256, the code would flag that as an error.
In fact, value 256 of div_param was a valid one (HW requires that div_param >= 1.0, when interpreted as a Q10.8 fixed point value).
Changed the if statements a bit to make the logic clearer, and added more descriptive error messages.
Also added missing error for the unimplemented case of low speed mode.
2016-11-24 12:27:32 +08:00
Angus Gratton
7e433ae3f4 Merge branch 'bugfix/uart_isr_rodata' into 'master'
UART driver: Fix crash in ISR due to "UART" static array moved to flash

Ref: http://esp32.com/viewtopic.php?f=13&t=546&sid=76ff371ae2b259441a2cf355e96d74b9#p2275

This is a really subtle bug, gcc noticed the UART array elements are read-only so
implicitly moved the elements to .rodata as if it was const. However
this array is accessed from the UART ISR, so has to be in IRAM or DRAM.

See merge request !245
2016-11-24 12:09:46 +08:00
Wangjialin
f97f198c9d driver: improve pulse counter code
1. Modify some comments in pcnt.h
2. Modify api/pcnt.rst
3. Improve example code.
4. Add status definitions in pcnt_reg.h
2016-11-24 12:01:21 +08:00
Angus Gratton
79646f41b5 Fixes for stdlib.h inclusion
Refs:
http://esp32.com/viewtopic.php?f=13&t=550
http://esp32.com/viewtopic.php?f=13&t=551

rmt.c should include stdlib.h for malloc, esp_bignum,c &
https_request_main.c for abort().

FreeRTOSConfig.h is only including stdlib if
CONFIG_FREERTOS_ASSERT_ON_UNTESTED_FUNCTION is set. However, it is
included for abort() so needs to be included whenever
CONFIG_FREERTOS_ASSERT_FAIL_ABORT is set.

This change includes unconditionally in FreeRTOSConfig.h. This is to
avoid this kind of bug where compiler errors are dependent on config. I
suggest we don't change this to be more selective until we have 'make
randomconfig' style tests in CI.
2016-11-24 08:20:21 +11:00
Wangjialin
a97e076dec add pcnt.rst 2016-11-23 19:07:30 +08:00
Wangjialin
6db1482cd5 Merge branch 'master' into driver_merge_tmp/merge_pcnt
# Conflicts:
#	components/driver/include/driver/periph_ctrl.h
2016-11-23 18:15:54 +08:00
Wangjialin
7571b8c2e4 driver: PCNT
minor changes
2016-11-23 18:10:45 +08:00
Wangjialin
c533099e08 driver: timer
1. minor modifications
2. use TIMG_WDT_INT_ENA_M instead of BIT(2) in wdt.c
3. add doc/api/timer.rst
2016-11-23 17:23:21 +08:00
Angus Gratton
1d05f41a70 UART driver: Fix crash in ISR due to "UART" static array moved to flash
Ref: http://esp32.com/viewtopic.php?f=13&t=546&sid=76ff371ae2b259441a2cf355e96d74b9#p2275

This is a really subtle bug, gcc noticed the UART array elements are read-only so
implicitly moved the elements to .rodata as if it was const. However
this array is accessed from the UART ISR, so has to be in IRAM or DRAM.
2016-11-23 10:58:03 +11:00
Wangjialin
a3c4a70ba3 driver: add hardware timer code.
1. add timer driver code
2. add timer example code
3. replace api for enable interrupt in task_wdt.c
2016-11-23 02:15:27 +08:00
Jeroen Domburg
720a6c1e54 Merge branch 'bugfix/gpio_config_pullup' into 'master'
Fix pullups is not configured by gpio_config

https://github.com/espressif/esp-idf/issues/110

https://github.com/espressif/esp-idf/pull/111

See merge request !226
2016-11-22 12:12:31 +08:00
Wangjialin
235eceea06 rmt: add documentation 2016-11-22 01:44:23 +08:00
Wangjialin
6a1dbc3f1c add RMT driver and example 2016-11-22 00:57:19 +08:00
Wangjialin
1cc1d9d721 driver: Add PCNT code
1. add PCNT module in periph_ctrl.c/.h
2. add description of PCNT status in pcnt_struct.h
3. add PCNT driver code
4. add PCNT example code.
2016-11-21 18:17:07 +08:00
Gabe
c6016952e8 Pullup is not configured by gpio_config #110 2016-11-21 11:11:13 +08:00
Ivan Grokhotkov
13d4734399 docs: fix Doxygen warnings, fail CI build on Doxygen warnings 2016-11-16 22:44:22 +08:00
Wangjialin
13b81debb3 Merge branch 'master' into bugfix/uart_isr_switch_context 2016-11-16 14:51:36 +08:00
Wangjialin
37cbb0bdea driver: bugfix/fix uart parity and frame error bug
1. modify definition for uart_parity_t
2. fix bugs in uart interrupt handler for parity err and frame err.
2016-11-16 14:44:06 +08:00
Wangjialin
d7599ab16d driver: fix header file warnings for Doxygen. 2016-11-16 01:31:02 +08:00
Wangjialin
a8a51a2786 bugfix/uart_isr_switch_context: add switching context in uart ISR.
1. add switching context in uart ISR
2. remove duplicated #include in uart.c
3. modify example in uart.h(will later add examples to idf/examples)
2016-11-15 13:47:51 +08:00
Jeroen Domburg
64a2f0ee0b Amend gpio driver to work around SoC bug with some pullups/pulldowns in the GPIO peripheral; mark existing function that does not always work as deprecated 2016-11-15 10:29:52 +08:00
Angus Gratton
c15024e629 Merge branch 'master' into feature/build_component_project_vars 2016-11-14 14:54:41 +11:00
Wangjialin
4f4c9030fd Fix uart tx bug, data pass(with flow control) through test ok. 2016-11-10 17:01:39 +08:00
Angus Gratton
208e83def7 build system: Refactor component.mk to not need component_common.mk
New makefile component_wrapper.mk allows some variables to be set
before component.mk is evaluated. This properly fixes problems with
sdkconfig being hard to access in all phases of the build.

Including component_common.mk is no longer necessary and will print a
deprecation warning for components which use it.
2016-11-10 15:52:22 +11:00
Wangjialin
6fb2515a5d Merge branch 'master' into driver_merge_tmp/merge_uart
# Conflicts:
#	components/esp32/include/esp_err.h
2016-11-10 11:57:19 +08:00
Ivan Grokhotkov
f142da3ced driver/gpio: fix interrupt type names in comment block
https://github.com/espressif/esp-idf/issues/56
2016-11-08 20:17:08 +08:00
Wangjialin
e452278194 Minor changes for driver
1. remove "\n" when calling ESP_LOGX APIs.
2. modify uart_event_t for uart rx data.
3. use MICRO for uart inverse value
4. add uart_tx_data_t for internal tx function.
2016-11-07 14:16:52 +08:00
Wangjialin
3ec23f1b83 Modify as Angus's suggestion:
1. Set XXX_TAG static, remove extern XXX_TAG in uart.h/ledc.h/gpio.h
2. I removed uart_set/get_print_port() functions, these functions are not well tested, I removed them for now.
3. Modify some function names for uart_read/write_bytes
4. Modify uart_write_bytes and uart_write_bytes_with_break.
2016-11-04 12:52:34 +08:00
Wangjialin
15474b9b7e Merge branch 'master' into driver_merge_tmp/merge_uart 2016-11-04 02:56:41 +08:00
Wangjialin
a6b3be6734 Update UART driver
1. fix bug in ringbuffer.c:
    When return an dummy item, free_ptr might exceed rd_ptr, so the write_ptr would overwrite rd_ptr in this case.
2. Delete UART tx task in buffer mode. UART ISR will copy the data from tx buffer to fifo.
2016-11-04 02:48:25 +08:00
Wangjialin
9ed7c4f8bc fix ringbuffer bug. 2016-11-03 23:30:54 +08:00
Wangjialin
8282c73ac2 debug ring buffer error. 2016-11-03 18:28:36 +08:00
Wangjialin
e1f0c98ef5 Modify gpio.h and ledc.h 2016-11-01 22:35:42 +08:00
Wangjialin
8d6b782327 Modify UART driver:
1. Add a ring buffer for UART TX.
    If the buffer size is set to zero, driver will not use a buffer. But we need a task to send data from buffer to fifo. I tried directly copy data in ISR, but the code looked too long for ISR.
2. Modify the format in uart.h
2016-11-01 09:22:09 +08:00
Krzysztof
f05cd619f4 Sample cleaning of markup 2016-11-01 01:20:04 +08:00
Wangjialin
74aff2b9d2 Update UART driver
1. Use esp_log API for LEDC and GPIO code.
2. Modify some API return value.
3. Add ledc_set_pin() for LEDC
4. Modify typo in uart.h

Questions: In uart driver ISR handler, I used xxxFromISR , like xSemaphoreGiveFromISR, do those FromISR functions need to be put in IRAM?
2016-10-24 15:57:23 +08:00
Wangjialin
9098e64398 modify GPIO number check 2016-10-24 09:38:34 +08:00
Wangjialin
288f4f63f0 Add UART driver
1. add uart.h and uart.c
2. add ESP_ERR_TIMEOUT in esp_err.h
3. add UART AHB FIFO address in uart_reg.h
4. modify xRingbufferSendFromISR return value in ringbuffer.c
5. add #include "soc/gpio_sig_map.h" in gpio.h
2016-10-24 09:17:10 +08:00
Jeroen Domburg
82df5f9aa0 Convert Windows -> Unix line ends in gpio.c 2016-10-08 14:12:55 +08:00
Wangjialin
d82cb7f60f Modify spinlock error in periph_ctrl.c 2016-09-29 11:50:25 +08:00
Wangjialin
e523a2532a Modify LEDC driver
1. configure LEDC timer saparately
2. add peripher_crtl.c/.h
    To enable the peripheral modules, we have to set/clear the control register in dport_reg.h.
    These bits are disabled by default and they are all in a same register, so we need to add a lock on that.
3. add include esp_err.h in gpio.h
2016-09-28 23:20:34 +08:00
Wangjialin
516ab36bbe Minor modification
1. add new line between typedefs
2. for param check functions, return bool if they are true/false
2016-09-28 12:04:15 +08:00
Wangjialin
ec45e1a593 components/driver: modify LEDC driver
1. modify ledc struct header: combine high speed and low speed channel
2. modify ledc init function
3. add timer control api
4. modify typo in ledc.h
2016-09-26 09:56:03 +08:00
Wangjialin
3f1c5c4d5b 1. add a macro 'GPIO_IS_VALID_OUTPUT_GPIO' and 'GPIO_IS_VALID_OUTPUT_GPIO' in gpio.h
2. add PIN_FUNC_GPIO in io_mux_reg.h, put the io_mux_regs in order
3. use braces around single line if statements in ledc.c and gpio.c
2016-09-23 14:52:26 +08:00
Wangjialin
85cd269ef8 add ledc driver code 2016-09-23 09:21:37 +08:00
Wangjialin
92569082c6 Remove some macros and declarations that are already in rom/gpio.h 2016-09-21 12:08:42 +08:00
Wangjialin
f7b10745be Remove mutex from GPIO driver code. Replace uint8_t/uint16_t with uint32_t 2016-09-21 09:51:37 +08:00
Wangjialin
948be5c0c4 modify typo 2016-09-19 17:50:18 +08:00
Wangjialin
2be163f6cc add gpio driver code 2016-09-19 17:33:21 +08:00