alex/esp-idf
alex/esp-idf
1
0
Fork 0
mirror of https://github.com/espressif/esp-idf.git synced 2024-10-05 20:47:46 -04:00
Code Issues Actions 2 Packages Projects Releases Wiki Activity

Merge branch 'bugfix/spi_command' into 'master'

Browse Source 
fix(spi_master): fix the command field to make it more intuitive to use.

See merge request !1119
This commit is contained in:
Ivan Grokhotkov 2017-08-28 10:29:56 +08:00
commit b636f81619
4 changed files with 11 additions and 10 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

10
components/driver/include/driver/spi_master.h
View File

@ -71,10 +71,12 @@ typedef struct {
*/
struct spi_transaction_t {
uint32_t flags; ///< Bitwise OR of SPI_TRANS_* flags
uint16_t command; ///< Command data, of which the length is set in the command_bits of spi_device_interface_config_t.
uint64_t addr; ///< Address data, of which the length is set in the address_bits of spi_device_interface_config_t.
///< <b>NOTE: this field is re-written to be used in a new way.</b>
///< - Example: write 0x123400 and address_bits=24 to send address of 0x12, 0x34, 0x00.
uint16_t cmd; ///< Command data, of which the length is set in the ``command_bits`` of spi_device_interface_config_t.
///< <b>NOTE: this field, used to be "command" in ESP-IDF 2.1 and before, is re-written to be used in a new way in ESP-IDF 3.0.</b>
///< - Example: write 0x0123 and command_bits=12 to send command 0x12, 0x3_ (in previous version, you may have to write 0x3_12).
uint64_t addr; ///< Address data, of which the length is set in the ``address_bits`` of spi_device_interface_config_t.
///< <b>NOTE: this field, used to be "address" in ESP-IDF 2.1 and before, is re-written to be used in a new way in ESP-IDF3.0.</b>
///< - Example: write 0x123400 and address_bits=24 to send address of 0x12, 0x34, 0x00 (in previous version, you may have to write 0x12340000).
size_t length; ///< Total data length, in bits
size_t rxlength; ///< Total data length received, should be not greater than ``length`` in full-duplex mode. (0 defaults this to the value of ``length``)
void *user; ///< User-defined variable. Can be used to store eg transaction ID.

7
components/driver/spi_master.c
View File

@ -550,10 +550,9 @@ static void IRAM_ATTR spi_intr(void *arg)
host->hw->miso_dlen.usr_miso_dbitlen=trans->length-1;
}
host->hw->user2.usr_command_value=trans->command;
// NOTE: WE CHANGED THE WAY USING ADDRESS FIELD. Now address should be filled in, in the following format:
// Example: write 0x123400 and address_bits=24 to send address 0x12, 0x34, 0x00 (in previous version, you may have to write 0x12340000)
// output command will be sent from bit 7 to 0 of command_value, and then bit 15 to 8 of the same register field.
uint16_t command = trans->cmd << (16-dev->cfg.command_bits); //shift to MSB
host->hw->user2.usr_command_value = (command>>8)|(command<<8); //swap the first and second byte
// shift the address to MSB of addr (and maybe slv_wr_status) register.
// output address will be sent from MSB to LSB of addr register, then comes the MSB to LSB of slv_wr_status register.
if (dev->cfg.address_bits>32) {

2
components/driver/test/test_spi_master.c
View File

@ -132,7 +132,7 @@ static void spi_test(spi_device_handle_t handle, int num_bytes) {
t.tx_buffer=sendbuf;
t.rx_buffer=recvbuf;
t.addr=0xA00000000000000FL;
t.command=0x55;
t.cmd=0x55;
printf("Transmitting %d bytes...\n", num_bytes);
ret=spi_device_transmit(handle, &t);

2
components/soc/esp32/include/soc/spi_struct.h
View File

@ -143,7 +143,7 @@ typedef volatile struct {
} user1;
union {
struct {
uint32_t usr_command_value: 16; /*The value of command.*/
uint32_t usr_command_value: 16; /*The value of command. Output sequence: bit 7-0 and then 15-8.*/
uint32_t reserved16: 12; /*reserved*/
uint32_t usr_command_bitlen: 4; /*The length in bits of command phase. The register value shall be (bit_num-1)*/
};