alex/esp-idf
alex/esp-idf
1
0
Fork 0
mirror of https://github.com/espressif/esp-idf.git synced 2024-10-05 20:47:46 -04:00
Code Issues Actions 2 Packages Projects Releases Wiki Activity

sdio_example/spi: fix sdkconfig include issue

Browse Source 
(MINOR CHANGES)
This commit is contained in:
Michael (XIAO Xufeng) 2018-07-12 15:57:32 +08:00
parent 04caff2fb2
commit 95dbfbe4c0
3 changed files with 19 additions and 38 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

1
components/driver/include/driver/spi_common.h
View File

@ -21,6 +21,7 @@
#include "esp_err.h"
#include "rom/lldesc.h"
#include "soc/spi_periph.h"
#include "sdkconfig.h"
#ifdef __cplusplus
extern "C"

23
examples/peripherals/sdio/host/main/app_main.c
View File

@ -16,32 +16,11 @@
#include "freertos/semphr.h"
#include "freertos/queue.h"
#include "lwip/sockets.h"
#include "lwip/dns.h"
#include "lwip/netdb.h"
#include "lwip/igmp.h"
#include "esp_wifi.h"
#include "esp_system.h"
#include "esp_event.h"
#include "esp_event_loop.h"
#include "nvs_flash.h"
#include "soc/rtc_cntl_reg.h"
#include "rom/cache.h"
#include "soc/sdmmc_periph.h"
#include "driver/periph_ctrl.h"
#include "esp_log.h"
#include "soc/gpio_reg.h"
#include "driver/gpio.h"
#include "esp_intr_alloc.h"
#include "freertos/FreeRTOS.h"
#include "freertos/task.h"
#include "esp_attr.h"
#include "esp_slave.h"
#include "sdkconfig.h"
/*
* For SDIO master-slave board, we have 3 pins controlling power of 3 different

33
examples/peripherals/sdio/slave/main/app_main.c
View File

@ -14,6 +14,7 @@
#include "soc/sdio_slave_periph.h"
#include "freertos/task.h"
#include "freertos/ringbuf.h"
#include "sdkconfig.h"
/*
sdio slave example.
@ -27,10 +28,10 @@
* IO4 D1
* IO12 D2
* IO13 D3
This is the only pins that can be used in standard ESP modules. The other set of pins (6, 11, 7, 8, 9, 10)
This is the only pins that can be used in standard ESP modules. The other set of pins (6, 11, 7, 8, 9, 10)
are occupied by the spi bus communicating with the flash.
Protocol Above the ESP slave service:
- Interrupts:
0 is used to notify the slave to read the register 0.
@ -48,7 +49,7 @@
When the host writes something to slave recv FIFO, the slave should return it as is to the sending FIFO.
The host works as following process:
1. reset the slave.
2. tell the slave to write registers and read them back.
3. tell the slave to send interrupts to the host.
@ -160,7 +161,7 @@ DMA_ATTR uint8_t buffer[BUFFER_NUM][BUFFER_SIZE] = {};
void app_main()
{
esp_err_t ret;
sdio_slave_config_t config = {
.sending_mode = SDIO_SLAVE_SEND_PACKET,
.send_queue_size = SDIO_SLAVE_QUEUE_SIZE,
@ -197,20 +198,20 @@ void app_main()
}
sdio_slave_set_host_intena(SDIO_SLAVE_HOSTINT_SEND_NEW_PACKET |
SDIO_SLAVE_HOSTINT_BIT0 |
SDIO_SLAVE_HOSTINT_BIT1 |
SDIO_SLAVE_HOSTINT_BIT2 |
SDIO_SLAVE_HOSTINT_BIT3 |
SDIO_SLAVE_HOSTINT_BIT4 |
SDIO_SLAVE_HOSTINT_BIT5 |
SDIO_SLAVE_HOSTINT_BIT6 |
SDIO_SLAVE_HOSTINT_BIT7
SDIO_SLAVE_HOSTINT_BIT0 |
SDIO_SLAVE_HOSTINT_BIT1 |
SDIO_SLAVE_HOSTINT_BIT2 |
SDIO_SLAVE_HOSTINT_BIT3 |
SDIO_SLAVE_HOSTINT_BIT4 |
SDIO_SLAVE_HOSTINT_BIT5 |
SDIO_SLAVE_HOSTINT_BIT6 |
SDIO_SLAVE_HOSTINT_BIT7
);
sdio_slave_start();
ESP_LOGI(TAG, EV_STR("slave ready"));
for(;;) {
//receive data and send back to host.
size_t length;
@ -249,7 +250,7 @@ void app_main()
if (s_job != 0) {
for(int i = 0; i < 8; i++) {
if (s_job & BIT(i)) {
ESP_LOGI(TAG, EV_STR("%s"), job_desc[i+1]);
ESP_LOGI(TAG, EV_STR("%s"), job_desc[i+1]);
s_job &= ~BIT(i);
switch(BIT(i)) {
@ -263,7 +264,7 @@ void app_main()
break;
case JOB_WRITE_REG:
ret = task_write_reg();
ESP_ERROR_CHECK(ret);
ESP_ERROR_CHECK(ret);
break;
}
}