Commit Graph

649 Commits

Author SHA1 Message Date
wuzhenghui
9eae151f7c esp32c6: bringup deepsleep examples 2023-03-02 15:06:05 +08:00
wuzhenghui
709adaaa37 soc_caps: since esp32c6 only support one ext wakeup src, split SOC_PM_SUPPORT_EXT_WAKEUP
Close IDF-5924
2023-03-02 15:06:05 +08:00
morris
f534247a00 driver: add parallel IO TX driver 2023-03-01 00:43:14 +00:00
Armando
fda9746bb8 esp_mm: cache_msync API 2023-02-28 10:42:22 +08:00
Armando
5653018cd1 esp_adc: support selecting clock source for oneshot driver 2023-02-23 11:48:31 +08:00
Armando
d0e4d36fb6 esp_adc: support h2 oneshot mode and continuous mode 2023-02-23 11:48:31 +08:00
Wan Lei
66cda021d0 Merge branch 'feature/h2_gpio_hysteresis_support' into 'master'
gpio: h2 support input hysteresis filter

Closes IDF-6653

See merge request espressif/esp-idf!22263
2023-02-21 17:27:56 +08:00
Wan Lei
cf5387fc76 Merge branch 'feature/h2_twai_support' into 'master'
twai: h2 support twai driver

Closes IDF-6217 and IDF-6673

See merge request espressif/esp-idf!22174
2023-02-21 11:43:51 +08:00
Jing Li
75a82988f1 Merge branch 'refactor/wdt_use_unified_type' into 'master'
wdt: refactor wdt codes to use unified type

Closes IDF-5653

See merge request espressif/esp-idf!22378
2023-02-21 09:46:06 +08:00
wanlei
c9bcec9212 gpio: h2 support input hysteresis filter 2023-02-20 19:34:48 +08:00
Armando
82ee8403b6 mmu: mmu_hal_check_valid_ext_vaddr_region 2023-02-17 13:04:55 +08:00
wanlei
fdeeced62c twai: h2 support twai driver 2023-02-16 16:34:23 +08:00
jingli
9c37441b17 wdt: refactor wdt codes to use unified type 2023-02-15 12:08:55 +08:00
Li Shuai
d3e0e3e3b6 pau: implement the pau regdma driver for esp32c6 2023-02-15 10:45:44 +08:00
Li Shuai
5850cd7492 pau: implement the pau regdma hal&ll layer for esp32c6 2023-02-15 10:45:44 +08:00
Armando (Dou Yiwen)
d3fec8394f Merge branch 'feature/adc_filter' into 'master'
adc: supported adc digital filter

Closes IDF-2529, IDFGH-9113, and IDFGH-9279

See merge request espressif/esp-idf!22035
2023-02-13 16:43:58 +08:00
Mahavir Jain
2974e8f487 Merge branch 'feature/apm_support_esp32c6' into 'master'
apm: added support for APM on esp32c6

Closes IDF-5819 and IDF-5818

See merge request espressif/esp-idf!22157
2023-02-13 12:45:41 +08:00
jingli
557a1ed1a5 soc_caps: remove SOC_GPIO_SUPPORT_SLP_SWITCH
all esp chips support this feature
2023-02-11 01:06:18 +00:00
Armando
3afa671069 esp_adc: added adc digital filter feature 2023-02-10 16:46:20 +00:00
Sachin Billore
8d0f6dab0f apm: added support for APM on esp32c6
Closes: IDF-5819 IDF-5818
2023-02-10 08:18:07 +00:00
Song Ruo Jing
b69f983525 uart: Fix two TX concurrency issues
1. Concurrency might cause ESP_ERR_TIMEOUT when calling uart_wait_tx_done
2. Concurrency might cause RTS line being de-assreted during tx transmission for rs485 mode
2023-02-08 14:24:43 +08:00
Armando
d6844051fc esp_mm: new virtual memory mapping apis via mmu 2023-02-07 20:23:52 +08:00
Armando
1fc55af6af cache: invalidate addr hal api 2023-02-07 20:23:52 +08:00
Armando
16398c2d06 mmu: move mem_caps macro to hal/mmu_types.h as an enum type 2023-02-07 20:23:52 +08:00
Wu Zheng Hui
33ae2e1073 Merge branch 'feature/bringup_esp32c6_light_sleep_pd_cpu' into 'master'
esp32c6: support light_sleep (Stage 1: support CPU power down)

See merge request espressif/esp-idf!21985
2023-02-01 14:11:15 +08:00
Li Shuai
c0ddaa5920 lp_timer: add hal-layer codes for esp32c6 2023-01-31 22:12:27 +08:00
Li Shuai
6c1f58f135 pmu: add hal layer codes for esp32c6 2023-01-31 22:12:27 +08:00
morris
dbca74f1ef gdma: prevent mutli-channels connect to the same peripheral
1. add check in the gdma driver, to prevent multiple channels connecting
   to the same peripheral
2. memory copy DMA ID will occupy the peripheral's DMA ID on some ESP
   targets (e.g. esp32c3/s3). We should search for a free one when
install async memcpy driver.

Closes https://github.com/espressif/esp-idf/issues/10575
2023-01-31 15:18:19 +08:00
Song Ruo Jing
ad55230b0a ledc: Add support for esp32h2; Refactor ledc driver clock source selection related code
LEDC examples and test cases are supported on ESP32H2.
   Switch to use general clock IDs for ledc_clk_cfg_t enum values.
   Deprecate LEDC_USE_RTC8M_CLK.
2023-01-30 19:19:34 +08:00
Marius Vikhammer
5e9e8c396f wdt: add support for WDTs on C6 2023-01-19 12:58:26 +08:00
Wan Lei
e7c520e849 Merge branch 'feature/add_spi_ckl_source_selectable' into 'master'
spi_master: add feature spi periph clk source selectable

Closes IDF-6289

See merge request espressif/esp-idf!21324
2023-01-19 00:54:24 +08:00
wanlei
184145817c spi_master: add feature spi periph clk source selectable 2023-01-18 15:40:12 +08:00
Armando
f1de9faa71 sdio: c6 support 2023-01-18 02:34:46 +00:00
Song Ruo Jing
2c9aa4559c clk_tree: Add a general API to get the frequency of different clocks
Add basic clk_tree driver and hal implementation.
2023-01-17 11:30:24 +08:00
Armando (Dou Yiwen)
d1b8da74d8 Merge branch 'refactor/improve_adc_power_maintanance' into 'master'
adc: improve adc power maintanance

Closes IDF-6114 and IDF-6318

See merge request espressif/esp-idf!21151
2023-01-12 20:30:36 +08:00
Cao Sen Miao
56a2d0b8a2 BOD: Bringup for ESP32C6 2023-01-10 10:37:30 +08:00
Armando
5be3c21cfc adc: improve power logic 2023-01-09 17:10:04 +08:00
Wan Lei
419544a2c8 Merge branch 'bugfix/fix_micro_error_SPI_HOST_MAX' into 'master'
spi: fix micro SPI_HOST_MAX error

Closes IDFGH-8932

See merge request espressif/esp-idf!21557
2023-01-05 16:07:17 +08:00
morris
ca1b182b25 glitch_filter: support derive clock source form IO MUX 2022-12-29 14:46:16 +08:00
Li Shuai
63af1e9631 modem clock(driver): implemented the modem clock driver for esp32c6 2022-12-27 21:31:59 +08:00
Li Shuai
8c05d6fd9d modem clock(hal): implemented the modem clock hal-layer for esp32c6 2022-12-27 21:31:21 +08:00
laokaiyao
ec812c1370 adc: add ADC target test for esp32c6 2022-12-23 14:05:56 +08:00
laokaiyao
5333ac81bf adc: support ADC on esp32c6 (driver/test/example) 2022-12-23 11:24:06 +08:00
laokaiyao
e27f3e3128 adc: support ADC on esp32c6 (hal) 2022-12-23 11:24:06 +08:00
Kevin (Lao Kaiyao)
42c6ae3522 Merge branch 'feature/support_rtcio_on_c6' into 'master'
rtcio: support rtcio on c6

Closes IDF-6027

See merge request espressif/esp-idf!21603
2022-12-23 10:56:49 +08:00
laokaiyao
7a002ab7a6 rtcio: support rtcio on c6 2022-12-22 14:14:38 +08:00
wanlei
faaf776730 spi: fix micro SPI_HOST_MAX error
Closes https://github.com/espressif/esp-idf/issues/10349
2022-12-21 20:03:46 +08:00
Song Ruo Jing
774197b7d3 ledc: Move ledc unit test to test_apps pytest framework
Add ledc_hal_set_duty_start and ledc_hal_set_duty_int_part to IRAM
Fix test_ledc.c minor issues
2022-12-21 12:04:42 +08:00
Song Ruo Jing
9402ab427b ledc: Add basic support for esp32c6 2022-12-07 18:40:50 +08:00
C.S.M
6b1d4b4d49 ESP32-H2: Last MR for g0 component support, (only hal left) 2022-12-05 17:32:21 +08:00
Aditya Patwardhan
1c233cc508 hmac_hal: Merge hmac hal layer for different into one 2022-11-24 16:04:26 +05:30
Ondrej Kosta
785f154f56 Merge branch 'feature/emac_buff' into 'master'
esp_eth: receive buffer allocation optimization

Closes IDFGH-7769

See merge request espressif/esp-idf!19977
2022-11-24 00:48:19 +08:00
morris
356c6bb528 gdma: support etm extension 2022-11-23 15:32:34 +08:00
morris
00b6ec28b2 gptimer: support etm event and task 2022-11-23 15:31:33 +08:00
morris
fb26d0e11f etm: added etm channel allocator 2022-11-23 15:31:33 +08:00
Konstantin Kondrashov
b4580a1980 Merge branch 'feature/esp_timer_add_ll_for_rc_fast_clk' into 'master'
hal: Adds hal/ll func for SYSTIMER to select clock source: XTAL or RC_FAST_CLK

Closes IDF-5323

See merge request espressif/esp-idf!21136
2022-11-23 15:05:48 +08:00
KonstantinKondrashov
63f852adc8 hal: Adds hal/ll func for SYSTIMER to select clock source: XTAL or RC_FAST_CLK 2022-11-22 20:29:19 +08:00
Omar Chebib
d965b7fdec Merge branch 'staging/esp_static_assert' into 'master'
C/Cxx: Static assertions are now unified

Closes IDFGH-8479

See merge request espressif/esp-idf!20569
2022-11-22 17:04:02 +08:00
Omar Chebib
cd21058097 C/Cxx: unify static assertions with the macro ESP_STATIC_ASSERT
Closes https://github.com/espressif/esp-idf/issues/9938
2022-11-21 16:18:08 +08:00
laokaiyao
039af72058 i2s: fixed typo 'philip'
Closes: https://github.com/espressif/esp-idf/issues/10197
2022-11-21 15:58:06 +08:00
Ondrej
6fff81d970 esp_eth: receive buffer allocation optimization
Receive buffers are allocated with a size equal to actual received frame size
2022-11-15 10:44:12 +00:00
Wan Lei
602884e668 Merge branch 'feature/_spi_slave_reset_trans_queue_api' into 'master'
spi_slave: add a private API to reset transaction queue

Closes IDF-5033

See merge request espressif/esp-idf!20825
2022-11-15 10:45:53 +08:00
Armando
ea0b839302 spi: limit esp32 dma workaround only on esp32 2022-11-14 16:01:48 +08:00
Armando
3dc36f622c spi_slave: add a private API to reset transaction queue 2022-11-14 16:01:48 +08:00
Song Ruo Jing
d0a7dc3e9f gpio: Fix IO hold function related problems
1. Fix deep sleep wakeup IOs can not be unhold issue
2. Correct hold related APIs' description
3. Fix gpio_force_hold_all API

docs: Add GPIO wakeup source to sleep_modes doc for ESP32C3 and C2
2022-11-11 20:39:04 +08:00
laokaiyao
8677216576 esp32h2: renaming esp32h2 to esp32h4 2022-11-08 17:05:33 +08:00
C.S.M
86aa012c26 Merge branch 'feature/bringup_i2c_esp32c6' into 'master'
I2C: Add i2c support for ESP32C6

Closes IDF-5326 and IDF-5327

See merge request espressif/esp-idf!20905
2022-11-08 11:56:15 +08:00
morris
f69a53f56d Merge branch 'feature/twai_bringup_esp32c6' into 'master'
TWAI: initial driver bring up on esp32c6 (TWAI0 only)

Closes IDF-5313 and IDF-5940

See merge request espressif/esp-idf!20735
2022-11-07 18:00:05 +08:00
Cao Sen Miao
803fc3fbe0 I2C: Add i2c support for ESP32C6 2022-11-07 14:12:53 +08:00
Kevin (Lao Kaiyao)
48b23b7c46 Merge branch 'feature/support_4_line_pdm_rx_on_esp32s3' into 'master'
i2s: support 4 line pdm rx on esp32s3

Closes IDF-6120

See merge request espressif/esp-idf!20753
2022-11-04 18:44:52 +08:00
morris
a25123f703 twai: bringup on esp32c6 2022-11-04 17:40:29 +08:00
laokaiyao
fa9b022f68 i2s: support 4 line pdm rx on esp32s3 2022-11-04 15:46:34 +08:00
KonstantinKondrashov
1f9260d790 all: Apply new version logic (major * 100 + minor) 2022-11-03 08:36:23 +00:00
laokaiyao
8ef9fd4623 dac: optimize the dma stratege 2022-10-25 17:14:59 +08:00
laokaiyao
f9f9a09dfb dac: update unit-test docs and examples for driver-NG 2022-10-25 17:00:41 +08:00
laokaiyao
351a18415c dac: driver-ng framework 2022-10-25 17:00:41 +08:00
Cao Sen Miao
9777c9d5b1 dac: refactor to new api on esp32s2 2022-10-25 17:00:41 +08:00
Cao Sen Miao
9e4ff3d374 dac_dma: Support DAC_DMA on esp32s2 2022-10-25 17:00:41 +08:00
morris
4176cb68de twai: remove deprecated code and add hint
name "CAN" has been deprecated for a long time, this commit just remove
it from the code base.

Please use "TWAI" driver instead.
2022-10-22 18:20:07 +08:00
Song Ruo Jing
6d24e8bcf4 gpio: Add support for esp32c6 2022-10-18 12:38:36 +08:00
jingli
b903a2253b esp_hw_support/sleep: fix current leakage when hold digital io during deep sleep 2022-10-11 12:11:28 +08:00
Michael (XIAO Xufeng)
507864c4f1 sdio_slave: allow disabling highspeed mode 2022-09-27 18:38:35 +08:00
Darian Leung
d333833f59 usb_host: Rename struct/ll/hal symbols to use "usb_dwc" prefix
Following the file renaming to use the "usb_dwc" prefix, this commit
updates the symbol names of those files to use the "usb_dwc" as well.

Some LL functions were also renamed so that the register name is
mentioned.
2022-09-16 16:45:26 +08:00
Darian Leung
d8d4e3acb0 usb_host: Rename struct/ll/hal files to use "usb_dwc" prefix
This commit updates the DWC_OTG based struct/ll/hal file names to
use the prefix "usb_dwc". This naming scheme reduces ambiguity if
another USB controller implementation is added.

As a result, "hcd.c" has been renamed to "hcd_dwc.c"
2022-09-16 16:45:26 +08:00
morris
a1030307f1 gptimer: bringup driver on esp32c6 2022-09-13 10:50:58 +08:00
Song Ruo Jing
0637ea91a3 Merge branch 'bugfix/fix_gpio_intr_lost' into 'master'
gpio: Fix interrupt lost issue

Closes IDFGH-5069

See merge request espressif/esp-idf!19625
2022-09-02 18:54:17 +08:00
Simon
e923c15859 Merge branch 'refactor/i2c_hal' into 'master'
I2C: Refactor i2c hal and ll(pre-MR of I2C driver-NG)

See merge request espressif/esp-idf!19750
2022-09-02 10:47:35 +08:00
morris
7b2c491064 Merge branch 'feature/add_esp32c6_g0_components' into 'master'
ESP32C6: Add G0 components support (hal, soc, riscv, esp_common)

See merge request espressif/esp-idf!19826
2022-09-01 16:11:40 +08:00
Song Ruo Jing
61282cc5dd gpio: Fix interrupt lost issue
In previous gpio default isr, interrupt status bits get cleared at the exit of the isr.
However, for edge-triggered interrupt type, the interrupt status bit should be cleared before entering the per-pin handlers to avoid any potential interrupt lost.

Closes https://github.com/espressif/esp-idf/pull/6853
2022-09-01 16:01:01 +08:00
Cao Sen Miao
31b88a4c88 I2C: Refactor i2c hal and ll 2022-09-01 15:53:59 +08:00
morris
e2634b5223 Merge branch 'feature/rgb_lcd_yuv_converter' into 'master'
RGB-YUV converter

Closes IDF-4598

See merge request espressif/esp-idf!19094
2022-09-01 13:41:14 +08:00
wuzhenghui
1d299a8976 esp32c6: add hal support 2022-09-01 12:37:51 +08:00
Gao Xu
0da21aca0d Merge branch 'bugfix/fix_spi_hd_quad_issue_esp32c3' into 'master'
essl_spi: fix wrong dummy cycle under quad spi mode ant add a test to verify spi quad mod

Closes IDF-5182 and IDF-5181

See merge request espressif/esp-idf!18680
2022-08-30 10:53:11 +08:00
Armando (Dou Yiwen)
ac63c0afd7 Merge branch 'feature/basic_mmu_framework' into 'master'
mmu: basic mmu driver framework

Closes IDFGH-6659 and IDF-5825

See merge request espressif/esp-idf!19547
2022-08-26 22:19:10 +08:00
Armando
2d44dc1eed mmu: driver framework, for vaddr maintenance
This commit gives basic mmu driver framework. Now it is able to maintain
mmu virtual address usage on esp32, esp32s2 and esp32s3. Usage to
external virtual address should rely on mmu functions to know which
address range is available, instead of hardcoded.

This commit also improves psram memory that is added to the heap
allocator. Now it's added to the heap, according to the memory
alignment.

Closes https://github.com/espressif/esp-idf/issues/8295
2022-08-26 17:59:06 +08:00
morris
995b89fbb6 gptimer: add API to get captured count value 2022-08-25 17:55:19 +08:00
Omar Chebib
f6ac350337 I2C: i2c_port_t type is now an enumeration
* Closes https://github.com/espressif/esp-idf/issues/9009
2022-08-24 10:51:09 +08:00
gaoxu
3610b14aef SPI : fix wrong dummy cycle on quad mode and put get-command function in spi_ll.h
1.The dummy_bits is set to 4 in ESP32C3/C2, therefore, the data transmission started too early.This commit fix this issue by changing dummy_bits to 8.
2.Put the spi command the spi defintion in spi_types.h
3.Put the function which get spi command or dummy bits in spi_ll.h
2022-08-23 10:46:56 +08:00
Armando (Dou Yiwen)
fec97b6b16 Merge branch 'bugfix/add_adc_oneshot_disable_ulp_enum' into 'master'
esp_adc: add adc ulp mode disable enum, and kconfig to enable dac output

Closes IDF-5843 and IDF-5846

See merge request espressif/esp-idf!19683
2022-08-23 10:46:54 +08:00
Michael (XIAO Xufeng)
0a2e5a7774 Merge branch 'feat/support_esp32c2_uart' into 'master'
uart: update console docs about frequency for ESP32-C2, move frequency of clock sources out of HAL

Closes IDF-5424 and IDF-4332

See merge request espressif/esp-idf!19274
2022-08-22 14:24:26 +08:00
Armando
5e31d4bb2b esp_adc: add adc ulp mode disable enum
Prior to this commit, adc ulp is disabled by setting
adc_oneshot_unit_init_cfg_t::ulp_mode to false.

After this commit, a new enum `ADC_ULP_MODE_DISABLE` is added. So
setting `ulp_mode` to `ADC_ULP_MODE_DISABLE`, instead of `false`, to
disable the ulp mode.
2022-08-22 11:00:28 +08:00
morris
fc1aa2848b rgb_lcd: support yuv converter 2022-08-17 06:33:06 +00:00
morris
bc372f8f55 rgb_lcd: deprecate esp_lcd_color_space_t 2022-08-16 14:35:08 +08:00
Michael (XIAO Xufeng)
746f4b814c uart: move frequency of clock sources out of HAL 2022-08-15 18:55:43 +00:00
wuzhenghui
7cb9304b65 Clean IRAM and DRAM address space conversion macros 2022-07-29 17:07:39 +08:00
morris
d94432fea8 systimer: refactor hal to accomodate more xtal choices 2022-07-25 16:08:52 +08:00
morris
c4e84751a5 driver: fix public header exceptions for driver 2022-07-22 00:12:36 +00:00
morris
454d658309 rgb_lcd: workaround pclk polarity bug by setting mo>=2 2022-07-21 13:06:09 +00:00
laokaiyao
edee3ee3cd i2s: add slot sequence table
Closes: https://github.com/espressif/esp-idf/issues/9208

When I2S is configured into different modes, the slot sequence varies.
This commit updates slot sequence tables and corresponding descriptions
in (both code and programming guide).
2022-07-21 15:52:39 +08:00
laokaiyao
90866e99fb i2s: add basic examples for STD/TDM/PDM mode 2022-07-21 15:52:39 +08:00
morris
4154eaec93 sdm: clean up soc/hal/ll code 2022-07-20 14:59:50 +08:00
Song Ruo Jing
4734b1433b Merge branch 'bugfix/gpio_hal_coverity_fix' into 'master'
gpio: Fix ESP32S3 GPIO48 does not support hold function bug and Fix coverity report

Closes IDF-4901

See merge request espressif/esp-idf!18805
2022-07-19 21:37:15 +08:00
Armando (Dou Yiwen)
9f6f61345b Merge branch 'feature/adc_driver_ng' into 'master'
ADC Driver NG

Closes IDF-4560, IDF-3908, IDF-4225, IDF-2482, IDF-4111, IDF-3610, IDF-4058, IDF-3801, IDF-3636, IDF-2537, IDF-4310, IDF-5150, IDF-5151, and IDF-4979

See merge request espressif/esp-idf!17960
2022-07-19 21:28:31 +08:00
Cao Sen Miao
53580a62b5 I2C: Fullfill the I2C clock tree, and support 26M XTAL on ESP32-C2 2022-07-19 11:41:42 +08:00
Armando
5b523a3313 esp_adc: new esp_adc component and adc drivers 2022-07-15 18:31:00 +08:00
songruojing
0c4b9a0101 gpio: Fix HAL bad bit shift operation on gpio_num_t reported from coverity
All gpio hal and ll functions input arguments gpio_num_t are changed to uint32_t type.
Validation of gpio num should be guaranteed from the driver layer.
2022-07-15 16:51:25 +08:00
Jiang Jiang Jian
b610b47a83 Merge branch 'feature/esp32s3_memprot_additional_improvements' into 'master'
[System/Security] Memprot after-merge improvements (v5.0)

Closes IDF-5263 and IDF-5208

See merge request espressif/esp-idf!18893
2022-07-13 15:48:20 +08:00
Ivan Grokhotkov
5b54ae76d4 esp_timer, hal: add support for non-integer systimer frequency
When ESP32-C2 is paired with a 26 MHz XTAL, the systimer tick
frequency becomes equal to 26 / 2.5 = 10.4 MHz. Previously we always
assumed that systimer tick frequency is integer (and 1 MHz * power of
two, above that!).
This commit introduces a new LL macro, SYSTIMER_LL_TICKS_PER_US_DIV.
It should be set in such a way that:

1. SYSTIMER_LL_TICKS_PER_US / SYSTIMER_LL_TICKS_PER_US_DIV equals the
   actual systimer tick frequency,
2. and SYSTIMER_LL_TICKS_PER_US is integer.

For ESP32-C2 this means that SYSTIMER_LL_TICKS_PER_US = 52 and
SYSTIMER_LL_TICKS_PER_US_DIV = 5.

This introduced two possible issues:

1. Overflow when multiplying systimer counter by 5
   - Should not be an issue, since systimer counter is 52-bit, so
     counter * 5 is no more than 55-bit.
2. The code needs to perform:
   - divide by 5: when converting from microseconds to ticks
   - divide by 52: when converting from ticks to microseconds
   The latter potentially introduces a performance issue for the
   esp_timer_get_time function.
2022-07-11 12:24:37 +08:00
Martin Vychodil
0c87ae2a91 System/Security: Memprot API unified (ESP32S3)
Added missing features and improvements
2022-07-09 22:57:51 +02:00
Michael (XIAO Xufeng)
a58362a429 Merge branch 'feature/efuse_rev_major_minor' into 'master'
efuse: Adds major and minor versions

See merge request espressif/esp-idf!18255
2022-07-07 11:48:54 +08:00
Cao Sen Miao
e218723e0e I2C: Make I2C clock frequency accurate 2022-07-06 11:58:08 +08:00
KonstantinKondrashov
0f8ff5aa15 efuse: Adds major and minor versions and others 2022-07-05 14:38:27 +08:00
Martin Vychodil
339fcbf14d System/Security: Memprot API unified (ESP32S3)
Unified Memory protection API for all PMS-aware chips - ESP32S3 port
2022-06-20 02:36:44 +00:00
Omar Chebib
752026a174 Merge branch 'refactor/remove_g0_dep_on_g1_riscv' into 'master'
G0: RISC-V targets have now an independent G0 layer

See merge request espressif/esp-idf!17926
2022-06-16 11:53:39 +08:00
laokaiyao
28b8fc6a7e i2s: update documents for driver-NG 2022-06-15 10:30:04 +08:00
laokaiyao
0fe3bb8ab7 i2s: update examples and unit-tests 2022-06-15 10:29:06 +08:00
laokaiyao
621d0aa942 i2s: Introduced a brand new driver 2022-06-15 10:29:06 +08:00
Omar Chebib
5bcd9b2db8 G0: RISC-V targets have now an independent G0 layer
G0 doesn't depend on any G1+ layer for RISC-V based targets
2022-06-14 15:00:53 +08:00
Darian Leung
a8a3756b38 hal: Route CPU and Interrupt Controller HAL/LL to esp_cpu calls
This commit makes changes to cpu_ll.h, cpu_hal.h, and interrupt_controller_hal.h:

- Moved to esp_hw_support in order to be deprecated in the future
- HAL/LL API now route their calls to esp_cpu.h functions instead

Also updated soc_hal.h as follows:

- Removed __SOC_HAL_..._OTHER_CORES() macros as they dependend on cpu_hal.h
- Made soc_hal.h and soc_ll.h interfaces always inline, and removed soc_hal.c.

This commit also updates the XCHAL_ERRATUM_572 workaround by

- Removing it's HAL function and invoking the workaround it directly the bootloader
- Added missing workaround for the ESP32-S3
2022-06-14 14:40:03 +08:00
morris
843279d287 rgb_lcd: support fractional clock divisor 2022-06-14 02:20:47 +00:00
morris
5daa73d236 Merge branch 'refactor/mcpwm_hal_driver_doc' into 'master'
mcpwm: don't support disable carrier one-shot pulse

Closes IDFGH-7406

See merge request espressif/esp-idf!18295
2022-06-10 10:28:59 +08:00
Cao Sen Miao
6589daabb9 MMU: Add configurable mmu page size support on ESP32C2 2022-06-08 19:34:31 +08:00
morris
f7ff7ac4d0 mcpwm: clean up hal driver and add doc 2022-06-02 15:01:18 +08:00
Cao Sen Miao
6a2d3509dc spi_flash: Making XMC flash works more stable when brownout detected 2022-06-02 10:38:55 +08:00
Jiang Jiang Jian
f3922f1b7f Merge branch 'feature/flash_mmap_refactor' into 'master'
flash mmap: abstract R/W of MMU table instead of reg access

See merge request espressif/esp-idf!16882
2022-05-29 13:56:37 +08:00
Darian Leung
c45784b8c4 hal: Fix systimer counter value bit field
This commit fixes the systimer_counter_value_t by adding a resreved field so that the
type fills 64-bits.

Without the reserved field, when compiling with -O0 optimization, the unoccupied high
bits would not be initalized by the compiler, leading to systimer_hal_get_counter_value()
returning a garbage value.
2022-05-26 12:56:25 +00:00
songruojing
a5b09cf015 rtc_clk: Clean up some clock related enum and macro in soc/rtc.h, replace with new ones in
soc/clk_tree_defs.h
2022-05-24 22:59:41 +08:00
jiangguangming
9c6afee12f flash mmap: abstract R/W MMU table instead of reg access 2022-05-20 16:46:27 +08:00
morris
8138f8bb02 driver: remove deprecated code
that declared as deprecated in the previous release
2022-05-19 11:31:53 +08:00
Jing Li
ac0d16cdc8 Merge branch 'bugfix/fix_cannot_lslp_again_after_ulp_wakeup' into 'master'
sleep: fix cannot lightsleep again after a wakeup from ULP

Closes IDFGH-4396

See merge request espressif/esp-idf!17970
2022-05-13 22:25:23 +08:00
jingli
dd414b9305 esp_hw_‎support/sleep: ‎fix cannot lightsleep again after a wakeup from ULP
Since ulp wakeup signal are connected to ulp int raw(except esp32), we
need to clear ulp int raw before sleep when ulp wakeup enabled. Otherwise,
if the ulp int raw is already set, chip will not sleep properly.

Closes https://github.com/espressif/esp-idf/issues/6229
2022-05-12 17:57:08 +08:00
Marius Vikhammer
c8617fe965 docs: fix all doxygen warnings
Doxygen warnings would previously not result in a failed pipeline.
Fixed this as well as all current warnings.
2022-05-12 14:50:03 +08:00
morris
722fde218d uart: add default source clock for all targets 2022-05-09 11:26:30 +08:00
Armando (Dou Yiwen)
03aeac1dde Merge branch 'refactor/adc_hal_common_layer' into 'master'
adc: create common adc hal layer

See merge request espressif/esp-idf!17577
2022-05-08 15:45:56 +08:00
Armando
49747bb486 adc: create common adc hal layer 2022-05-07 19:20:44 +08:00
morris
2fb43820c2 driver_ng: implement new rmt driver
The legacy driver can't handle the breaking change between esp chips

very well.

And it's not elegant to extend new feature like DMA, ETM.

The new driver can return a opaque handle for each RMT channel.

An obvious transaction concept was also introduced.

TX and RX functionalities are splited out.
2022-05-07 10:34:50 +00:00
Cao Sen Miao
4418a855ba spi_flash: refactor the spi_flash clock configuration, and add support for esp32c2 2022-04-26 15:22:37 +08:00
laokaiyao
b99ced08a2 i2s: fix only right case
Closes: https://github.com/espressif/esp-idf/issues/8538
2022-04-23 07:38:45 +00:00
Darian Leung
09dc46552b twai: Fix twai_ll_parse_frame_buffer() typo
Closes https://github.com/espressif/esp-idf/issues/8743
2022-04-22 15:25:39 +08:00
morris
373d9b3dbc Merge branch 'feature/default_clk_for_gptimer' into 'master'
clk_tree: added default clock source for peripherals (GPTimer, RMT, LCD, TempSensor)

Closes IDF-4894

See merge request espressif/esp-idf!17759
2022-04-19 18:02:40 +08:00
songruojing
534346f4bb ledc: Provide support for esp32c2 and esp32h2
LEDC examples, unit test, and programming guide are all updated.
2022-04-14 08:15:14 +00:00
morris
f32a89826c clk_tree: added default clock source for peripheral 2022-04-14 15:44:56 +08:00
morris
cc71e645be Merge branch 'feature/ksz8863rll_support' into 'master'
ESP IDF infrastructure preparation for ksz8863rll support

See merge request espressif/esp-idf!17203
2022-04-14 10:51:27 +08:00
songruo
60bb5c913d clk_tree: prework of introducing clk subsystem control
1. Clean up clk usage in IDF, replace rtc_clk_xtal/apb_freq_get with
   upper level API esp_clk_xtal/apb_freq
2. Fix small errors and wrong comments related to clock
3. Add clk_tree_defs.h to provide an unified clock id for each chip
   Modify the NGed drivers to adopt new clock ids
2022-04-11 12:09:06 +08:00
Ondrej Kosta
4051b80b4d esp_netif: remove dependency of L2 TAP Interface from netif_lwip
esp_eth: extended infrastructure to optionally provide more advanced access to MAC/PHY layers
2022-04-08 16:40:29 +02:00
Armando
a8a47a61f5 spi_flash: move buffer check from hal layer to driver layer
Prior to this change, `spi_flash_hal_supports_direct_write` and
`spi_flash_hal_supports_direct_read` will check the buffer pointer
place, which should be done in driver layer, instead of HAL layer.
2022-04-08 11:46:10 +08:00
Armando
c4bcf1117c esp_hw_support: move soc_memory_types.h helper functions into esp_hw_support 2022-04-08 11:46:10 +08:00
laokaiyao
f17edba20b i2s: extract std/pdm/tdm modes
Type structures of these modes are defined. Driver and HAL layer are modified to fit these concepts.
2022-03-22 10:14:45 +08:00
Armando
386363cafd adc: unify adc_ll_num_t and adc_unit_t 2022-03-18 11:36:50 +08:00
Armando (Dou Yiwen)
6ed3ffbbf1 Merge branch 'refactor/remove_redundant_rom_cache_dependency' into 'master'
cache: remove redundant rom cache dependency in bootloader

Closes IDF-4523

See merge request espressif/esp-idf!17077
2022-03-12 10:11:39 +08:00
Armando
c1cbd7bbf6 cache/mmu: implememnt cache and mmu hal APIs in bootloader 2022-03-11 22:43:11 +08:00
morris
9f55712c03 rmt: document and improve LL driver 2022-03-09 10:58:12 +08:00
Sachin Parekh
bc1d35a14e esp32c2/hal: Added ECC HAL layer 2022-03-08 14:05:23 +00:00
Simon
4bf4a020a6 Merge branch 'refactor/abstract_temperature_sensor' into 'master'
temperature_sensor: Refactor temperature sensor to new APIs (follow rule of driverNG) and support esp32s3

Closes IDF-3665, IDF-3367, and IDF-1793

See merge request espressif/esp-idf!16787
2022-03-07 20:17:39 +08:00
morris
a0283234cd Merge branch 'feature/support_esp32h2_gpio' into 'master'
esp32h2: support GPIO peripheral, IO_MUX, GPIO matrix

Closes IDF-4232 and IDF-3439

See merge request espressif/esp-idf!16609
2022-03-04 18:22:28 +08:00
Cao Sen Miao
b248046bcb Temperature_sensor: Create new temperature sensor API 2022-03-04 18:13:35 +08:00
songruojing
c8c137f2b7 esp32h2: support GPIO peripheral, IO_MUX, GPIO matrix.
Generic GPIO example is supported as well.
2022-03-04 11:25:05 +08:00
morris
ec8defaa96 pulse_cnt: new driver for PCNT peripheral 2022-03-03 22:38:32 +08:00
Song Ruo Jing
b665dcbe68 Merge branch 'feature/esp32c2h2_support_uart' into 'master'
UART: Provide support for esp32c2 and esp32h2

Closes IDF-3823, IDF-4154, and IDF-4221

See merge request espressif/esp-idf!16832
2022-03-03 11:45:10 +08:00
laokaiyao
b336a838b6 i2s: fix bug of switching mono/stereo mode by 'i2s_set_clk' on c3/s3 2022-03-02 03:34:25 +00:00
songruojing
24a60c12c6 uart: Provide support for esp32c2 and esp32h2
UART examples, unit test, and programming guide are all updated.
2022-03-02 11:29:13 +08:00
Kevin (Lao Kaiyao)
cc1d89ebba Merge branch 'feature/i2c_support_on_esp8684_esp32h2' into 'master'
i2c: support i2c on esp32c2 and esp32h2

Closes IDF-3918

See merge request espressif/esp-idf!16444
2022-02-28 13:59:02 +08:00
Konstantin Kondrashov
44e5ac2c59 Merge branch 'feature/efuse_hal' into 'master'
hal: Adds efuse hal layer

See merge request espressif/esp-idf!16354
2022-02-28 13:38:43 +08:00
KonstantinKondrashov
9605f3eb1a soc: Adds efuse hal
Replaced eFuse ROM funcs with hal layer
2022-02-24 22:20:09 +08:00
laokaiyao
7da023ceae i2c: support esp32c2 2022-02-23 15:19:37 +08:00
morris
116197040f i2s: update copyright 2022-02-21 21:28:48 +08:00
0xFEEDC0DE64
c86fba7919 Fix compiling when included from C++ 2022-02-18 15:37:07 +01:00
Ondrej Kosta
7512bdecfe Merge branch 'feature/emac_start_stop_test' into 'master'
test_emac: extended Ethernet start/stop stress test

Closes IDF-4540

See merge request espressif/esp-idf!16755
2022-02-15 13:23:01 +00:00
David Cermak
8da2e4088c esp_eth: Update esp32's EMAC API to decouple driver and vendor config 2022-02-14 16:17:29 +00:00
David Cermak
1dc60730ee esp_eth: ESP32 EMAC to use common DMA busrt size for both Tx and Rx 2022-02-14 16:17:29 +00:00
David Cermak
2553fb5845 esp_eth: Make EMAC DMA burst size configurable
Merges https://github.com/espressif/esp-idf/pull/7874
Closes  https://github.com/espressif/esp-idf/issues/7380
2022-02-14 16:17:29 +00:00
Ondrej Kosta
e97fd4b076 esp_eth: EMAC start/stop optimization 2022-02-14 08:21:43 +01:00
morris
2ab7d92785 lcd: improve LL driver according to TRM 2022-01-24 18:58:37 +08:00
laokaiyao
cf049e15ed esp8684: rename target to esp32c2 2022-01-19 11:08:57 +08:00
Ivan Grokhotkov
876f4d6a1c vfs: add support for semihosting on ESP32-C3 2022-01-14 17:29:03 +01:00
Armando
6a74cb695d spi: support spi on 8684 2022-01-12 11:30:29 +08:00
morris
869bed1bb5 soc: don't expose unstable soc header files in public api 2022-01-06 23:10:22 +08:00
morris
8cdcb4e291 rmt: move RMT item definition from soc to driver 2022-01-06 21:43:12 +08:00
Darian Leung
1aad12468a usb: Hub Driver Update and Refactor
Hub Driver is refactored as follows:

This commit update and refactors the Hub Driver as follows:

- Refactored enumeration state machine and stage functions
    - Enumeration stage is now incremented
    - Combined transfer stages of enumeration into common functions
- Comments updated
- Fixed usbh_hal_disable_debounce_lock() that would cause root_port_handle_events()
    to fail the HCD_PORT_CMD_RESET call because the previous port connection interrupt
    was not cleared.

The following features were added to the Hub Driver

- Enumeration config descriptor is now fetched in two separate stages
    - Header is fetched first to determine the wTotalLength of the descriptor
    - Fetching the full descriptor will request exactly wTotalLength bytes
    - This works around some non-compliant devices that will babble/return zero
        when requesting a length > wTotalLength
    - Closes https://github.com/espressif/esp-idf/issues/7799
- Enumeration now stores string descriptors
    - The Manufacturer, Product, and Serial Number string descriptors are
        now read and stored during enumeration
    - String descriptors are now part of usb_device_info_t
- Added unit test to test enumeration
2022-01-06 15:11:13 +08:00
Darian Leung
854127a57c usb: USB Host stack uses USB PHY driver
This commit updates the USB Host stack to use the USB PHY driver. The
USB PHY and the OTG Controller should now both be setup/deleted using
usb_new_phy() and usb_del_phy() respectively.

- The hcd_install() now expects the USB PHY and OTG Contorller to be
    already setup before it is called
- usb_host_install() now has an option to skip calling usb_del_phy() if
    the user wants to setup their own USB PHY (e.g., in the case of using
    and external PHY).
- CDC-ACM and MSC examples/test updated to use internal PHY

Closes https://github.com/espressif/esp-idf/issues/8061
2022-01-06 15:09:39 +08:00
Ondrej Kosta
fa9cc49b9e Merge branch 'bugfix/esp_eth_start_tx_buff' into 'master'
Fixed ESP32 EMAC driver `insufficient TX buffer size`

Closes WIFI-4194

See merge request espressif/esp-idf!16457
2022-01-05 09:40:12 +00:00
songruojing
e0bc3a923c esp8684: support GPIO peripheral, IO_MUX, GPIO matrix.
Generic GPIO example and GPIO unit test on esp8684 are both supported as well.
2021-12-29 22:01:45 +08:00
laokaiyao
4f28b33bbc apll: add lock for apll 2021-12-29 10:13:13 +08:00
Ondrej Kosta
1150a11c56 Fixed ESP32 EMAC driver insufficient TX buffer size which could followed esp_eth_stop and esp_eth_start sequence 2021-12-23 10:48:38 +01:00
morris
2c810f8451 timer: save alarm value in driver layer 2021-12-23 11:39:32 +08:00
Martin Vychodil
dd938eb952 System/Security: Memprot API unified (ESP32C3)
Unified Memory protection API for all PMS-aware chips (ESP32C3)

Closes JIRA IDF-3849
2021-12-21 01:50:36 +01:00
Armando
4dc0d6b2fe adc: support adc dma driver on all chips 2021-12-16 00:19:15 +00:00
morris
89e37837d0 lcd: rgb pclk idle default to low 2021-11-30 13:44:06 +08:00
Ondrej Kosta
3a7a67f174 netif: added ESP-NETIF L2 TAP interface 2021-11-23 11:17:22 +01:00
Omar Chebib
aa2ca7dd94 LEDC: improved support for ESP32-C3 and refactored divisor calculation
As ESP32C3 does not have support for REF_TICK source clock, it is now not
possible to select it anymore.
Auto cfg clock has been improved for all boards.
2021-11-11 12:21:15 +08:00
morris
83d16aa00c gdma: support IRAM interrupt 2021-11-08 16:14:51 +08:00
Cao Sen Miao
09487761cf ESP8684: add freertos, hal, esp_system support 2021-11-06 17:33:44 +08:00
Alexey Gerenkov
bb9cd84cdc debug_stubs: Refactor and add support for RISCV 2021-11-04 01:33:24 +03:00
Darian Leung
0c758c8557 usb: Fix how the HCD handles sudden disconnection
This commit fixes how the USB Host HCD handles sudden disconnections.

Bugs:
- HW channels remain active when the port suddenly disconnects, and
previously the channel would be disabled by setting the disabled bit,
then waiting for a disabled interrupt. However, ISOC channels do not
generate the disabled interrupt when the port is invalid, thus leading
to tasks getting indefinitely blocked in hcd_pipe_command().

Fix:
On a sudden disconnection, forcibly treat all channels as halted even
if their HCCHAR.ChEna bit is still set. We do a soft reset after a port
error anyways, so the channels will eventually be reset.

Closes https://github.com/espressif/esp-idf/issues/7505
2021-11-02 14:30:58 +08:00
Darian Leung
0159c37cf2 usb: Fix LL 8/16 bit register field access
This commit addes the 8/16 bit register field access workarounds to
the DWC_OTG peripheral. This workaround was applied to all other
peripherals in commit 874a720286.
2021-11-02 14:30:58 +08:00
Jakob Hasse
7efb01846f [cxx]: simple spi master class
* spi cxx unit test (CATCH-based, on host)
* added portmacro.h to driver mocking
* added simple testing app to write/read SPI,
  using an MPU9250
2021-10-25 14:56:59 +08:00
morris
e2275b1f63 gptimer: clean up hal and ll for driver-ng 2021-10-20 18:40:08 +08:00
Kevin (Lao Kaiyao)
a9faafee3c Merge branch 'feature/touch_sensor_driver_support_for_esp32s3' into 'master'
driver(touch): support touch sensor for esp32s3 platform

Closes IDF-1784 and IDF-3302

See merge request espressif/esp-idf!14102
2021-10-12 05:50:58 +00:00
morris
7283e349b9 Merge branch 'refactor/rgb_lcd_callback_add_event_data' into 'master'
lcd: modify callback prototype && build API docs

See merge request espressif/esp-idf!15354
2021-10-09 06:26:44 +00:00
laokaiyao
f4705f8eb4 touch sensor: update copyright notice 2021-10-08 11:45:57 +08:00
fuzhibo
057b9d61b5 driver(touch): support touch sensor for esp32s3 platform 2021-10-08 10:39:46 +08:00
morris
e09e39c94f lcd: unify callback prototype 2021-10-02 14:23:31 +08:00
laokaiyao
7264c0e59a i2s_rec_example: add support for esp32s3 2021-10-01 16:05:04 +01:00
Alex Lisitsyn
f40ae9cae9 Merge branch 'bugfix/fix_esp_restart_does_not_reset_timer_groups_periph' into 'master'
driver: fix esp_restart() does not reset timer group peripheral

Closes IDFGH-4652

See merge request espressif/esp-idf!12188
2021-09-16 11:45:42 +00:00
Alex Lisitsyn
c5d0d89508 driver: fix timer driver initialization sequence to not trigger interrupt immediately
add timer_hal_reset_periph()
fix timer_init() to reset timer counter during init
2021-09-16 19:45:33 +08:00
Armando (Dou Yiwen)
13b63cd9d2 Merge branch 'feature/support_adc_calibration_s3' into 'master'
adc: support adc calibration on s3

Closes IDF-1950, IDF-3730, and IDF-3036

See merge request espressif/esp-idf!15031
2021-09-14 08:51:03 +00:00
Armando
c45c6f52f1 adc: support adc efuse-based calibration on esp32s3 2021-09-14 11:42:50 +08:00
songruojing
1fcd639224 usb: Add usb_phy driver to support operations on USB PHY 2021-09-13 12:39:56 +08:00
morris
25f723765e Merge branch 'feature/lcd_driver_follow_up' into 'master'
lcd: add PM lock

Closes IDF-3631, IDF-3704, and IDF-3317

See merge request espressif/esp-idf!14880
2021-09-10 03:14:50 +00:00
Wang Meng Yang
a885c42cda Merge branch 'example/controller_hci_uart_for_esp32s3' into 'master'
examples: added support of ESP32-S3 chip in controller_hci_uart example

Closes BT-1906

See merge request espressif/esp-idf!14935
2021-09-08 06:02:18 +00:00
Cao Sen Miao
e85e9dc824 Merge branch 'feature/esp_flash_octal_api_support_xmic' into 'master'
esp_flash: Add new octal flash chip support in new chip driver (for MXIC)

Closes IDF-2859

See merge request espressif/esp-idf!14185
2021-09-08 03:59:34 +00:00
morris
02e470bc50 lcd: add pm lock 2021-09-08 11:34:46 +08:00
Cao Sen Miao
6c0aebe279 esp_flash: add opi flash support in esp_flash chip driver, for MXIC 2021-09-07 14:44:40 +08:00
Jiang Jiang Jian
316988bd2d Merge branch 'feature/support_esp32s3_cpu_tagmem_retention' into 'master'
support esp32s3 cpu + tagmem retention

See merge request espressif/esp-idf!14579
2021-09-06 03:47:44 +00:00
Kevin (Lao Kaiyao)
2991eea97d Merge branch 'refactor/i2s_driver' into 'master'
driver/i2s: bugfix and refactor for i2s

Closes IDF-3656 and IDF-3738

See merge request espressif/esp-idf!14704
2021-09-06 02:07:40 +00:00
laokaiyao
c5afd7ce34 i2s: fix write failure on ESP32 in 32bit slave mode 2021-09-03 17:36:44 +08:00
laokaiyao
0ff3dd9778 i2s: fix mono support issue 2021-09-02 14:33:36 +08:00
laokaiyao
b26da6f115 driver/i2s: refactor for i2s driver layer 2021-09-02 14:33:36 +08:00
Sachin Billore
f80d6f8c21 Digital Signature support for S3
Closes IDF-1791
2021-09-02 11:59:24 +05:30
Marius Vikhammer
bdf3a8ff29 Merge branch 'feature/xtwdt' into 'master'
WDT: Add support for XTAL32K Watchdog timer

Closes IDF-2575

See merge request espressif/esp-idf!15000
2021-09-02 02:44:47 +00:00
Marius Vikhammer
4869b3cd4a WDT: Add support for XTAL32K Watchdog timer 2021-09-02 09:09:00 +08:00
Darian
8af7292496 Merge branch 'feature/new_usb_host_driver' into 'master'
(5) USB: Add public USB Host Driver

Closes IDF-3121, IDF-3509, and IDF-3557

See merge request espressif/esp-idf!13145
2021-08-30 09:28:43 +00:00
Li Shuai
ccf1a9a1fc light sleep: add i/d-cache tagmem retention support for esp32s3 2021-08-27 11:11:09 +08:00
Li Shuai
03746de96f light sleep: add cpu power down support for esp32s3 2021-08-27 11:11:06 +08:00
Martin Vychodil
58aed7df98 ESP32S2: No assert()/abort() in Memprot API, use esp_err_t instead
JIRA IDF-3634
2021-08-26 09:20:00 +02:00
wangmengyang
c053ef0541 examples: added support of ESP32-S3 chip in controller_hci_uart example 2021-08-26 14:24:32 +08:00
Darian Leung
accbaee57c Add USB Host Library
This commit adds the preliminary version of the USB Host Library. This commit contains:

- USBH (USB Host Driver)
- Hub Driver that only supports a single device and device enumeration
- USB Host Library (asychronous API)
- Test cases for USB Host Library asychronous API

The following changes were made to the existing HCD:
- Removed HCD_PIPE_STATE_INVALID. Pipes are no longer invalidated
- Changed pipe commands to halt, flush, and clear. Pipes need to be manually
  halted, flush, and cleared.
- Halting and flushing a pipe will execute the pipe callback if it causes a
  HCD_PIPE_EVENT_URB_DONE event
2021-08-24 23:28:00 +08:00
morris
bb87fd8f08 Merge branch 'refactor/pcnt_driver_esp32s3' into 'master'
pcnt: soc update and hal refactor

See merge request espressif/esp-idf!14698
2021-08-20 04:23:15 +00:00
morris
71d475149d lcd: update doc unit test and example to support 8-line spi 2021-08-19 16:40:22 +08:00
bizhuangyang
8143832041 spi_master:support octal mode for esp32s2 and esp32s3
Add support for 8-line spi for lcd on esp32s2 and esp32s3

Closes https://github.com/espressif/esp-idf/issues/6371
2021-08-19 16:40:22 +08:00
morris
56760c9669 pcnt: refactor hal driver 2021-08-10 17:19:21 +08:00
laokaiyao
f863998e90 driver/i2s: support mclk 2021-08-04 10:20:03 +08:00
laokaiyao
3c57a6ac36 driver/i2s: refactor ll and hal 2021-08-04 10:20:03 +08:00
laokaiyao
d51b85989b doc/i2s: update i2s programming guide on s3 & c3 2021-08-04 10:20:03 +08:00
laokaiyao
f7f8c9c11f driver/i2s: support i2s on c3 and s3
1. Support i2s on esp32c3 and esp32s3
    2. Refactor i2s_config_t to avoid breaking change
    2. Fix a bug that receiving unavailable values from message queue when dma queue has been re-allocted
    4. Support i2s unit test on esp32c3 and esp32s3
2021-08-04 10:20:03 +08:00
houwenxiang
2f1247e1c4 driver: support I2S on ESP32-S3 & ESP32-C3
1. refactor I2S driver.
  2. support TDM mode for esp2s3 & esp32c3.
2021-08-04 10:20:03 +08:00
morris
f907009056 Merge branch 'refactor/cleanup_mcpwm_examples' into 'master'
mcpwm: more clean up (example + LL + doc)

Closes IDF-3295

See merge request espressif/esp-idf!12798
2021-07-29 10:41:07 +00:00
Armando
3ce2d85e9e adc: support adc2 working with WiFi 2021-07-28 17:50:14 +08:00
morris
88c87bfe56 mcpwm: update hal and soc naming 2021-07-26 22:32:45 +08:00
Michael (XIAO Xufeng)
fbb6b1b11a Merge branch 'bugfix/fix_uart_reset_issue_on_esp32c3' into 'master'
bugfix(uart): reset uart0 core before uart apb reset

Closes IDF-3362

See merge request espressif/esp-idf!12749
2021-07-22 07:20:58 +00:00
Chen Yi Qun
6317f5b481 add uart core reset in uart_module_enable() 2021-07-21 11:41:04 +08:00
Omar Chebib
a6e14c37b2 SPI: chip select can now be kept active if the bus has been acquired
The user can now request the chip select to remain active after the current
transfer. In order to do so, he MUST acquire the bus first with `spi_device_acquire_bus()`
function, else, an error is returned.
2021-07-21 10:39:45 +08:00
Darian Leung
d604bf05af TWAI: Fix incorrect configuration initializers for low speed bit rates
This commit fixes the timing configuration initializers for the
1K, 5K, and 10K bit rates.
2021-07-19 14:27:39 +08:00
Omar Chebib
a7b6ec85b8 Merge branch 'feature/move_memory_layout_to_heap' into 'master'
G0: Memory layouts are now part of heap components

Closes IDF-1264

See merge request espressif/esp-idf!14028
2021-07-19 06:23:19 +00:00
Michael (XIAO Xufeng)
59195b6fb3 Merge branch 'bugfix/update_gdma_soc' into 'master'
gdma: alignment setting for PSRAM transfer

Closes IDF-1524

See merge request espressif/esp-idf!13976
2021-07-17 14:04:03 +00:00
Renz Bagaporo
702e41e1c8 esp32s2: move crypto related functions 2021-07-16 20:14:26 +08:00
morris
3176ba11d8 gdma: update DMA soc data for esp32-s3 2021-07-16 14:47:09 +08:00
morris
217d3eb690 Merge branch 'feature/adc_single_sample_support_on_s3' into 'master'
adc: support adc single read on s3

Closes IDF-3118

See merge request espressif/esp-idf!14036
2021-07-16 06:32:08 +00:00
laokaiyao
27d9657b6c driver/adc: support adc single sample on s3 2021-07-15 19:13:50 +08:00
Omar Chebib
2575c0d49f i2c: fix I2C slave clock source selection
In I2C slave mode, clock source can now be changed, according to
the flags specified in `i2c_config_t` structure. Thus, ESP32-S2
can now act as an I2C slave, even with a 400KHz master clock.
2021-07-15 12:28:57 +08:00
Omar Chebib
c4f57af6c9 G0: Memory layouts are now part of heap components 2021-07-15 11:38:23 +10:00
Ondrej Kosta
a6db3a5e77 esp_eth: Change clock mode setting
RMII clock mode is made to be run-time configurable.

Closes https://github.com/espressif/esp-idf/issues/6564
Closes https://github.com/espressif/esp-idf/issues/7107
2021-07-08 14:27:31 +02:00
Michael (XIAO Xufeng)
5986b204c6 Merge branch 'feature/i2c_add_static_buffer_transfers' into 'master'
i2c: add `i2c_cmd_link_create_static()` to create commands from a given buffer

Closes IDFGH-3087

See merge request espressif/esp-idf!13013
2021-07-02 14:00:03 +00:00
Shu Chen
205cd469e9 esp32h2: update driver/hal/soc components to support esp32h2 2021-07-01 19:53:11 +08:00
Michael (XIAO Xufeng)
e8ff60544d Merge branch 'bugfix/channel_clk_independent' into 'master'
rmt: clean up and support esp32-s3 (no DMA support)

Closes IDF-3296 and IDFGH-5350

See merge request espressif/esp-idf!13244
2021-07-01 04:37:07 +00:00
Darian Leung
d37451f2c7 USB HCD: Add pipe persistence feature
This commit adds a pipe persistence feature allowing HCD pipes
to survive a port reset.
2021-06-29 21:09:27 +08:00
bizhuangyang
78c67d2384 gpio:support gpio in/out/interrupt for esp32s3(728)
Add support of gpio for esp32s3(728). Adjust some pins and comments in test_gpio.c. Add support for gpio functions for gpio19 and gpio20. Update S3 programming guide Peripheral API: gpio and sigmadelta. Add unit test for input and output function of S3 USB pins(GPIO19 and GPIO20) and C3 USB pins(GPIO18 and GPIO19). Adjust input only test in test_spi_master.c.
2021-06-28 11:44:14 +08:00
Michael (XIAO Xufeng)
99988fa454 Merge branch 'refactor/emac_hal' into 'master'
hal/emac_hal: refactor of emac_hal

Closes IDF-3155

See merge request espressif/esp-idf!13500
2021-06-22 15:34:51 +00:00
morris
8e483e34a8 rmt: restructure rmt_signal_conn_t 2021-06-22 15:29:11 +08:00
morris
9afdf54748 hal: added HAL_ASSERT 2021-06-22 11:28:01 +08:00
laokaiyao
fe354f1c50 hal/emac_hal: refactord emac_hal 2021-06-16 09:48:21 +08:00
Darian Leung
5f9692ae97 HCD: Fix multiple bugs
This commit fixes the following bugs with the HCD and USB Host HAL

- Make the setting to periodic frame list and scheduling to occur after
  a reset command
- All port errors states should put the port into the HCD_PORT_STATE_RECOVERY
  state.
- Fixed incorrect return type of hcd_port_command() function
2021-06-15 18:52:56 +08:00
Omar Chebib
cfcbca1271 i2c: optimize space allocated for read or write buffers
Only a single command will be allocated now when a read or write is
prepared in the command list. The size of a command's buffer is not
limited to 255 bytes anymore.
2021-06-09 15:21:20 +08:00
morris
d4fe219c49 mcpwm: refactor driver 2021-06-09 12:27:01 +08:00
Michael (XIAO Xufeng)
1596e336a1 Merge branch 'bugfix/spi_flash_cs_setup' into 'master'
spi_flash: fix cs line setup to make the flash driver more stable

Closes IDF-3240

See merge request espressif/esp-idf!13623
2021-06-04 07:05:05 +00:00
Alex Lisitsyn
46020fe13a usb/hal/soc: initial copy of usbh support from esp32s2
copy required usbh driver files from esp32s2
check usb host functionality using unit tests on esp32s3
2021-06-02 17:57:50 +08:00
Cao Sen Miao
08f1bbe0c7 spi_flash: fix cs line setup to make the flash driver more stable 2021-06-01 16:41:41 +08:00
daiziyan
611ecc619b docs:translate chip series comparison table and update adc_types.h 2021-05-19 16:25:27 +08:00
laokaiyao
48c848a895 driver/ledc: support invert channel output 2021-05-11 11:54:16 +08:00
Alex Lisitsyn
ea6710ce98 soc/hal: add tinyusb support esp32s3
add usb hal/soc, usb_ll files and esp32s3 target for usb
move usb_hal.h into soc common folder
soc/hal: fix soc and periph for usb
tinyusb: fix tinyusb io header
hal: usb_ll fix pull up/down config for esp32s3
soc/hal: fix peripheral addresses
2021-05-06 16:20:54 +08:00
Cao Sen Miao
0d81edb174 spi_flash: refactoring flash encryption into new api 2021-04-25 17:09:25 +08:00
Michael (XIAO Xufeng)
bea022ce1c Merge branch 'refactor/usb_common_and_hal_types' into 'master'
Separate USB HAL and common USB types

Closes IDF-2931

See merge request espressif/esp-idf!12642
2021-04-23 12:50:35 +00:00
Angus Gratton
0be81903cc Merge branch 'bugfix/hal_duplicated_interrupt_functions' into 'master'
[hal]: merged duplicated HAL layer functions

Closes IDF-2308

See merge request espressif/esp-idf!12444
2021-04-23 07:47:51 +00:00
Angus Gratton
96c2acd9a8 Merge branch 'refactor/strip_systimer_hal_layer' into 'master'
refactor HAL driver of systimer to a common systimer_hal

Closes IDF-2996

See merge request espressif/esp-idf!13027
2021-04-23 07:45:31 +00:00
morris
ec898b771e systimer: strip hal driver 2021-04-22 21:08:39 +08:00
morris
7c1e1c9e2d systimer: update soc data 2021-04-22 21:07:35 +08:00
morris
7eb9ecb4f6 esp_ds: move timeout mechanism to driver layer 2021-04-22 21:07:35 +08:00
Darian Leung
2906a25988 Separate USB HAL and common USB types
This commit separates out the common USB types used throughout most of the stack into its
own header file inside the USB component. The types used in the USB HAL are now exclusive
to the HAL.
2021-04-22 19:24:48 +08:00
Armando
85e29dace7 spi_slave_hd: add callback after data is loaded to the DMA for segment mode 2021-04-20 20:08:29 +08:00
Michael (XIAO Xufeng)
1f29036ead Merge branch 'feat/c3_driver_api_cleanup' into 'master'
driver: cleanup i2c, i2s on C3

Closes IDF-2759 and IDF-2760

See merge request espressif/esp-idf!12329
2021-04-13 09:00:11 +00:00
Michael (XIAO Xufeng)
8cfcf6da7a Merge branch 'bugfix/enable_gpio18_gpio19_esp32c3' into 'master'
gpio: Disable USB JTAG when setting pins 18 and 19 as GPIOs on ESP32C3

Closes IDF-2964

See merge request espressif/esp-idf!12753
2021-04-12 09:39:55 +00:00
Michael (XIAO Xufeng)
67941fc495 i2s: removed unsupported features on different targets 2021-04-12 15:51:54 +08:00
Michael (XIAO Xufeng)
82e4a2431a i2c: removed unsupported features on different targets 2021-04-12 15:51:19 +08:00
Michael (XIAO Xufeng)
925dacd7fb Merge branch 'bugfix/remove_HSPI_macro_on_c3' into 'master'
spi: remove HSPI macros on esp32c3 and esp32s3

Closes IDF-2535

See merge request espressif/esp-idf!12637
2021-04-08 09:33:18 +00:00
Omar Chebib
cd79f3907d gpio: Disable USB JTAG when setting pins 18 and 19 as GPIOs on ESP32C3
When `DIS_USB_JTAG` eFuse is NOT burned (`False`), it is not possible
to set pins 18 and 19 as GPIOs. This commit solves this by manually
disabling USB JTAG when using pins 18 or 19.
The functions shall use `gpio_hal_iomux_func_sel` instead of
`PIN_FUNC_SELELECT`.
2021-04-08 14:01:18 +08:00
Armando
9b9ea71ff9 spi: remove HSPI macro on esp32c3 and esp32s3 2021-04-06 13:42:49 +08:00
Jakob Hasse
b23c9142d5 [hal]: cleaned up interrupt mask functions
* Functions for setting and clearing interrupts
  as well as function to read interrupt mask
  should be clearer now.
* Using hal layer interrupt set and clear
  functions in esp_wifi component
2021-04-06 11:54:13 +08:00
Darian Leung
2f58060921 TWAI: FIFO overrun handling and errata workarounds
This commit adds handling for FIFO overruns and
adds workarounds for HW errats on the ESP32.

Closes https://github.com/espressif/esp-idf/issues/2519
Closes https://github.com/espressif/esp-idf/issues/4276
2021-03-30 14:17:31 +08:00
Armando
cc6bfcd9ac adc: apply adc power API to adc driver
Closes https://github.com/espressif/esp-idf/issues/6269
Closes https://github.com/espressif/esp-idf/issues/6682
2021-03-26 17:58:00 +08:00
Armando
0e0baee25a adc: add implementation of missed public API
Added ``adc1_pad_get_io_num``, ``adc2_pad_get_io_num`` and
``adc_vref_to_gpio``.
2021-03-26 12:04:46 +08:00