morris
217d3eb690
Merge branch 'feature/adc_single_sample_support_on_s3' into 'master'
...
adc: support adc single read on s3
Closes IDF-3118
See merge request espressif/esp-idf!14036
2021-07-16 06:32:08 +00:00
laokaiyao
27d9657b6c
driver/adc: support adc single sample on s3
2021-07-15 19:13:50 +08:00
Michael (XIAO Xufeng)
ded74889da
Merge branch 'bugfix/spi_slave_wrong_miso_mosi' into 'master'
...
spi_slave: Fix MOSI/MISO inconsistent references on the SPI Slave drivers.
See merge request espressif/esp-idf!13645
2021-07-15 08:51:41 +00:00
Armando
6bb6f3ebc4
adc: refactor esp32s3 adc_ll.h
2021-07-15 10:33:03 +08:00
Li Shuai
d2aeb9e4ce
light sleep: add gpio configure workaround at slept status for esp32s3
2021-07-14 21:57:21 +08:00
Marius Vikhammer
71c1da8952
timer group: add timer group and WDT support for ESP32S3
...
Regenerate timer group header files and update LL, check examples
and update docs.
2021-07-06 16:21:43 +08:00
morris
d9d4db43a1
Merge branch 'feature/dedic_gpio_esp32s3' into 'master'
...
Dedicated gpio driver on esp32s3
Closes IDF-3387
See merge request espressif/esp-idf!14196
2021-07-06 03:20:04 +00:00
Michael (XIAO Xufeng)
5986b204c6
Merge branch 'feature/i2c_add_static_buffer_transfers' into 'master'
...
i2c: add `i2c_cmd_link_create_static()` to create commands from a given buffer
Closes IDFGH-3087
See merge request espressif/esp-idf!13013
2021-07-02 14:00:03 +00:00
Michael (XIAO Xufeng)
e8ff60544d
Merge branch 'bugfix/channel_clk_independent' into 'master'
...
rmt: clean up and support esp32-s3 (no DMA support)
Closes IDF-3296 and IDFGH-5350
See merge request espressif/esp-idf!13244
2021-07-01 04:37:07 +00:00
morris
c8c3015018
dedic_gpio: support on esp32s3
2021-06-30 18:10:54 +08:00
Gustavo Henrique Nihei
4bc9e18124
spi: Ensure DMA In-Link EOF is generated by trans_done on SPI Slave
2021-06-28 18:58:59 -03:00
Gustavo Henrique Nihei
fb8d9f76b3
spi: Remove Slave TX/RX set bitlen not effective for ESP32-S2/C3/S3
...
Furthermore, RX_EOF_EN should only be set when SPI Slave is configured
for segment transfer mode and the "ms_data_bitlen" field is configured
to control the "IN_SUC_EOF" interrupt. Since "ms_data_bitlen" is not
set anymore for S2, C3 and S3, "RX_EOF_EN" should be cleared.
2021-06-28 18:58:59 -03:00
bizhuangyang
78c67d2384
gpio:support gpio in/out/interrupt for esp32s3(728)
...
Add support of gpio for esp32s3(728). Adjust some pins and comments in test_gpio.c. Add support for gpio functions for gpio19 and gpio20. Update S3 programming guide Peripheral API: gpio and sigmadelta. Add unit test for input and output function of S3 USB pins(GPIO19 and GPIO20) and C3 USB pins(GPIO18 and GPIO19). Adjust input only test in test_spi_master.c.
2021-06-28 11:44:14 +08:00
morris
40f350693f
rmt: update soc data with regtool for esp32s3
2021-06-22 15:29:11 +08:00
morris
a1494809b2
rmt: clean up LL driver
2021-06-22 15:29:11 +08:00
morris
9afdf54748
hal: added HAL_ASSERT
2021-06-22 11:28:01 +08:00
Cao Sen Miao
f2fe0847d5
usb_serial_jtag: add initial support for S3 (including flashing, monitoring, writing, and reading) but console is not avaliable now
2021-06-18 12:42:41 +08:00
Cao Sen Miao
11672dc9e5
soc: update the csv headers for esp32s3
2021-06-16 18:04:18 +08:00
Michael (XIAO Xufeng)
1322a44588
Merge branch 'feature/mcpwm_refactor_and_support_esp32s3' into 'master'
...
MCPWM: refactor driver and support ESP32-S3
Closes IDF-1765
See merge request espressif/esp-idf!11907
2021-06-09 16:45:20 +00:00
Omar Chebib
cfcbca1271
i2c: optimize space allocated for read or write buffers
...
Only a single command will be allocated now when a read or write is
prepared in the command list. The size of a command's buffer is not
limited to 255 bytes anymore.
2021-06-09 15:21:20 +08:00
Angus Gratton
bc4eb2071c
Merge branch 'feature/toolchain_2021r1' into 'master'
...
Bring 2021r1 toolchains
Closes IDFGH-5009
See merge request espressif/esp-idf!13554
2021-06-09 05:06:23 +00:00
morris
d4fe219c49
mcpwm: refactor driver
2021-06-09 12:27:01 +08:00
Michael (XIAO Xufeng)
afe9b42cbf
Merge branch 'typo_fix/fix_typo_in_comment_in_uart_ll' into 'master'
...
Fix typo in `include/hal/uart_ll.h`
Closes IDFGH-5320
See merge request espressif/esp-idf!13826
2021-06-09 02:13:36 +00:00
Michael (XIAO Xufeng)
e005ec0899
Merge branch 'feature/s3_base_support' into 'master'
...
soc: S3 base support
See merge request espressif/esp-idf!13827
2021-06-07 12:07:08 +00:00
Anton Maklakov
5a982ffe7a
hal: fix ee.get_gpio_in command for esp32-s3
2021-06-07 12:52:50 +07:00
Marius Vikhammer
19a492bc8d
soc: add base support for ESP32-S3
...
Updates the following with changes from verification branches:
* esp_rom linker files
* rtc_cntl and system reg and struct headers
Also updates:
* GDMA driver with new register layout
* esptool submodule commit
2021-06-07 10:40:14 +08:00
Michael (XIAO Xufeng)
1596e336a1
Merge branch 'bugfix/spi_flash_cs_setup' into 'master'
...
spi_flash: fix cs line setup to make the flash driver more stable
Closes IDF-3240
See merge request espressif/esp-idf!13623
2021-06-04 07:05:05 +00:00
Andrey Starodubtsev
8488055711
Fix typo in include/hal/uart_ll.h
...
s/final state machine/finite-state machine/g
Signed-off-by: bizhuangyang <bizhuangyang@espressif.com>
Merges https://github.com/espressif/esp-idf/pull/7076
2021-06-02 15:37:30 +08:00
Cao Sen Miao
08f1bbe0c7
spi_flash: fix cs line setup to make the flash driver more stable
2021-06-01 16:41:41 +08:00
Gustavo Henrique Nihei
c1b3d77dcf
spi: Fix wrong target register for interrupt disable
2021-05-31 11:25:32 -03:00
Michael (XIAO Xufeng)
8409485b22
Merge branch 'doc/fix_misleading_of_mcpwm_capture_enable_doc' into 'master'
...
driver/mcpwm: fix the misleading of mcpwm_capture_enable parameters
Closes IDFGH-3000
See merge request espressif/esp-idf!13497
2021-05-16 15:15:26 +00:00
laokaiyao
e66f25caf2
driver/mcpwm: fix the misleading of mcpwm_capture_enable parameters
...
closes https://github.com/espressif/esp-idf/issues/5032
2021-05-13 12:23:19 +08:00
morris
e10202a608
lcd: add esp_lcd component
...
* Support intel 8080 LCD panel IO on ESP32-S3
* Support RGB LCD panel on ESP32-S3
* Support SPI && I2C LCD panel IO on all esp chips
2021-05-12 17:53:32 +08:00
Kang Zuoling
8887133d0c
touch_sensor: fix esp32s2 touch sensor default power source
2021-05-08 11:09:17 +08:00
Michael (XIAO Xufeng)
758238a8a1
Merge branch 'bugfix/separate_gdma_tx_rx_interrupt' into 'master'
...
gdma: separate tx/rx channel interrupt
Closes IDF-3181
See merge request espressif/esp-idf!13367
2021-05-06 16:38:44 +00:00
Alex Lisitsyn
ea6710ce98
soc/hal: add tinyusb support esp32s3
...
add usb hal/soc, usb_ll files and esp32s3 target for usb
move usb_hal.h into soc common folder
soc/hal: fix soc and periph for usb
tinyusb: fix tinyusb io header
hal: usb_ll fix pull up/down config for esp32s3
soc/hal: fix peripheral addresses
2021-05-06 16:20:54 +08:00
morris
6e981af406
gdma: separate tx/rx channel interrupt
2021-05-06 15:06:37 +08:00
Michael (XIAO Xufeng)
41937a9f97
Merge branch 'feature/support_spi_on_727' into 'master'
...
spi: support spi on 727
Closes IDF-3178
See merge request espressif/esp-idf!13346
2021-04-28 08:16:15 +00:00
Ivan Grokhotkov
9d34a1cd42
Merge branch 'bugfix/optimise_esp_timer_get_time' into 'master'
...
systimer: optimise esp_timer_get_time
See merge request espressif/esp-idf!13335
2021-04-27 08:52:09 +00:00
Armando
831b6127d7
spi: update interrupt set in spi_ll.h
2021-04-27 11:11:00 +08:00
morris
988c88a6b1
systimer: optimise esp_timer_get_time
2021-04-26 11:54:02 +08:00
Cao Sen Miao
0d81edb174
spi_flash: refactoring flash encryption into new api
2021-04-25 17:09:25 +08:00
Ivan Grokhotkov
ea7d020f20
Merge branch 'feature/ubsan' into 'master'
...
system: add option to enable undefined behavior sanitizer (UBSAN)
Closes IDF-166 and IDF-1824
See merge request espressif/esp-idf!11318
2021-04-23 09:27:42 +00:00
Angus Gratton
0be81903cc
Merge branch 'bugfix/hal_duplicated_interrupt_functions' into 'master'
...
[hal]: merged duplicated HAL layer functions
Closes IDF-2308
See merge request espressif/esp-idf!12444
2021-04-23 07:47:51 +00:00
Ivan Grokhotkov
e449728b7d
hal: fix planted break instruction for Xtensa targets
...
On Xtensa, "break 0, 0" encodes a software breakpoint which is placed
into the program by the debug monitor. Planted breakpoints (added in
the code to trap into debugger) should be encoded as "break 1, 15".
See table "Breakpoint Instruction Operand Conventions" in the ISA
Reference manual.
2021-04-22 23:33:47 +02:00
Ivan Grokhotkov
da90775d98
hal: mpu: fix signed overflow error
2021-04-22 23:33:47 +02:00
morris
ec898b771e
systimer: strip hal driver
2021-04-22 21:08:39 +08:00
Michael (XIAO Xufeng)
7e06a60c0d
Merge branch 'refactor/no_dac_on_esp32s3' into 'master'
...
dac: added DAC support macro
Closes IDF-1777
See merge request espressif/esp-idf!13038
2021-04-12 10:52:33 +00:00
Michael (XIAO Xufeng)
8cfcf6da7a
Merge branch 'bugfix/enable_gpio18_gpio19_esp32c3' into 'master'
...
gpio: Disable USB JTAG when setting pins 18 and 19 as GPIOs on ESP32C3
Closes IDF-2964
See merge request espressif/esp-idf!12753
2021-04-12 09:39:55 +00:00
morris
75dfd970b4
dac: added DAC support macro
...
Remove DAC support on ESP32-S3
2021-04-12 12:04:46 +08:00
Michael (XIAO Xufeng)
57af5acefe
Merge branch 'ci/enable_all_test_for_i2c_on_c3' into 'master'
...
I2C: enable all unit test for i2c on esp32c3
Closes IDF-2494
See merge request espressif/esp-idf!12474
2021-04-08 12:31:51 +00:00
Michael (XIAO Xufeng)
925dacd7fb
Merge branch 'bugfix/remove_HSPI_macro_on_c3' into 'master'
...
spi: remove HSPI macros on esp32c3 and esp32s3
Closes IDF-2535
See merge request espressif/esp-idf!12637
2021-04-08 09:33:18 +00:00
Omar Chebib
cd79f3907d
gpio: Disable USB JTAG when setting pins 18 and 19 as GPIOs on ESP32C3
...
When `DIS_USB_JTAG` eFuse is NOT burned (`False`), it is not possible
to set pins 18 and 19 as GPIOs. This commit solves this by manually
disabling USB JTAG when using pins 18 or 19.
The functions shall use `gpio_hal_iomux_func_sel` instead of
`PIN_FUNC_SELELECT`.
2021-04-08 14:01:18 +08:00
Cao Sen Miao
c3da21a93f
I2C: enable all unit test for i2c on esp32c3
2021-04-06 17:37:55 +08:00
Armando
9b9ea71ff9
spi: remove HSPI macro on esp32c3 and esp32s3
2021-04-06 13:42:49 +08:00
Jakob Hasse
b23c9142d5
[hal]: cleaned up interrupt mask functions
...
* Functions for setting and clearing interrupts
as well as function to read interrupt mask
should be clearer now.
* Using hal layer interrupt set and clear
functions in esp_wifi component
2021-04-06 11:54:13 +08:00
aleks
193f1f9b4e
driver: fix uart handler in iram calls inline uart_ll_is_tx_idle
2021-03-31 14:39:59 +00:00
Darian Leung
2f58060921
TWAI: FIFO overrun handling and errata workarounds
...
This commit adds handling for FIFO overruns and
adds workarounds for HW errats on the ESP32.
Closes https://github.com/espressif/esp-idf/issues/2519
Closes https://github.com/espressif/esp-idf/issues/4276
2021-03-30 14:17:31 +08:00
Angus Gratton
fa2946d651
Merge branch 'feature/support_esp32s3_beta_3' into 'master'
...
Support ESP32S3 beta 3 target
Closes IDF-2908
See merge request espressif/esp-idf!12661
2021-03-23 10:17:58 +00:00
Michael (XIAO Xufeng)
67ba80f2ec
Merge branch 'bugfix/reduce_the_consumption_of_touch_sensor_during_deep_sleep' into 'master'
...
fix: reduce the consumption of touch sensor during deep sleep
See merge request espressif/esp-idf!12248
2021-03-22 07:10:44 +00:00
Angus Gratton
54edd4fc58
Merge branch 'feature/wdt_c3' into 'master'
...
wdt: Fix RTC_SLOW_CLK for chips, corrects WDT timeout.
Closes IDF-2118 and IDF-2332
See merge request espressif/esp-idf!12796
2021-03-22 06:48:58 +00:00
KonstantinKondrashov
aa1338bf23
wdt: Fix timeout and RTC_SLOW_CLK
...
RTC_SLOW_CLK
ESP32: 150kHz
ESP32-S2: 90kHz
ESP32-S3: 150kHz
ESP32-C3: 150kHz
2021-03-19 00:15:18 +08:00
Marius Vikhammer
2aead8ba57
Support ESP32S3 Beta 3 target
...
Update ROM API. Port changes from bringup branch.
2021-03-18 10:24:22 +08:00
morris
5a520cacf1
timer_group: correct timer_ll_set_divider
2021-03-16 17:56:37 +08:00
fuzhibo
6b361ed70f
fix: reduce the consumption of touch sensor during deep sleep
2021-03-15 03:59:54 +00:00
morris
d0be56b8fe
lcd: add LL driver for esp32-s3
2021-03-13 22:31:30 +08:00
Angus Gratton
fd164b82b6
Merge branch 'refactor/move_from_xtensa' into 'master'
...
Movements from xtensa
Closes IDF-2164
See merge request espressif/esp-idf!10556
2021-03-11 00:24:25 +00:00
Michael (XIAO Xufeng)
fc61e60948
uart: fixed incorrect baudrate on C3 and S3 when target is too slow
...
The integer part of the divider is only 12-bit now. We used prescaler to get low frequency instead.
2021-03-09 20:09:42 +08:00
Michael (XIAO Xufeng)
e9ecc4a0af
Merge branch 'bugfix/esp32s3_flash_read_write' into 'master'
...
spi_flash: modify nvs reading writing issue on esp32s3
Closes WIFI-3438 and IDF-2866
See merge request espressif/esp-idf!12604
2021-03-04 03:53:35 +00:00
Cao Sen Miao
0b7caf96a9
spi_flash:modify nvs reading writing issue on esp32s3
2021-03-03 22:02:32 +08:00
fuzhibo
cfe59031a5
fix: clear interrupt in touch sensor initialization
2021-03-01 03:57:01 +00:00
Renz Bagaporo
1efdcd69d9
xtensa: move out trax
2021-02-26 19:45:48 +08:00
Cao Sen Miao
a8343bc470
esp_system: support gpio wakeup from deep sleep on esp32c3
2021-02-26 12:26:49 +08:00
morris
7b37158ede
rmt: distinguish group and channel in HAL layer
2021-02-25 12:42:23 +08:00
morris
6dc7f95342
mcpwm: fix wrong meta information
2021-02-22 20:23:35 +08:00
Marius Vikhammer
245a2469f6
sha: dont enable/disable GDMA when enable/disable SHA module
...
Enabling and disabling of the GDMA module is done by the GDMA driver.
2021-02-02 19:24:57 +08:00
Michael (XIAO Xufeng)
c99e891201
Merge branch 'feature/sync_adc_changes_from_c3_to_master_last' into 'master'
...
adc: sync adc changes from c3 to master (last time)
Closes IDF-2694
See merge request espressif/esp-idf!12134
2021-01-26 12:52:20 +08:00
Michael (XIAO Xufeng)
3d7da2c8ff
adc: simplify LL on C3
2021-01-25 15:08:55 +08:00
Cao Sen Miao
9905da46e0
spi_flash: Add auto suspend mode on esp32c3
2021-01-25 11:14:02 +08:00
Michael (XIAO Xufeng)
06f22fc4b0
Merge branch 'feature/new_restart_mode_driver_and_ut_for_spi_slave_hd' into 'master'
...
spi_slave_halfduplex: append mode driver
See merge request espressif/esp-idf!10845
2021-01-24 09:27:12 +08:00
Armando
0538dc2d93
spi_slave_hd: add DMA Append Mode feature
2021-01-21 18:53:53 +08:00
Jiang Jiang Jian
26ae354dc5
Merge branch 'feature/support_esp32c3_lightsleep_master' into 'master'
...
support esp32c3 lightsleep for master
Closes IDF-2106
See merge request espressif/esp-idf!11975
2021-01-20 16:00:06 +08:00
Angus Gratton
55970fe3a2
Merge branch 'feature/esp32c3_support_brownout' into 'master'
...
esp32c3: Adds support BROWNOUT reset
Closes IDF-2397
See merge request espressif/esp-idf!11910
2021-01-20 12:19:56 +08:00
Li Shuai
a43de3a44b
fix set UART_FORCE_XOFF
can't stop new Tx request issue
2021-01-19 14:51:22 +08:00
Li Shuai
355dd10257
light sleep: dfs support for esp32c3
2021-01-19 14:50:58 +08:00
KonstantinKondrashov
e62d4a6b81
esp32s3: BROWNOUT reset reason is set directly without using the brownout ISR
2021-01-18 15:38:09 +08:00
ninh
659d805411
esp_wifi: light sleep optimization
2021-01-18 15:31:03 +08:00
Angus Gratton
19883d9799
Merge branch 'bugfix/fix_sign_conversion_warnign' into 'master'
...
freertos: Silence sign-conversion warning
Closes IDFGH-3949
See merge request espressif/esp-idf!10724
2021-01-15 14:40:59 +08:00
Marius Vikhammer
0713e93b8f
TWAI: bringup for S3 and C3
2021-01-14 20:30:31 +08:00
Michael (XIAO Xufeng)
2d3f22918f
Merge branch 'feature/gdma_channel_allocator' into 'master'
...
gdma channel allocator
Closes IDF-2124
See merge request espressif/esp-idf!11570
2021-01-14 10:52:49 +08:00
Renz Bagaporo
ff2d9fd96c
[freertos] Silence sign-conversion warning
2021-01-14 10:54:15 +11:00
Angus Gratton
f683db7aea
Merge branch 'feature/c3_IDF-2554' into 'master'
...
global: Uses CCOUNT API instead of XTHAL macro
Closes IDF-2554
See merge request espressif/esp-idf!11954
2021-01-13 12:55:21 +08:00
morris
e6d23a35ec
gdma: dynamic alloc DMA channels
2021-01-13 10:52:27 +08:00
KonstantinKondrashov
dada7cd035
global: Uses CCOUNT API instead of XTHAL macro
2021-01-12 16:24:23 +08:00
morris
753a929525
global: fix sign-compare warnings
2021-01-12 14:05:08 +08:00
Michael (XIAO Xufeng)
caf1e9d570
Merge branch 'bugfix/soc_caps_implicit_inc' into 'master'
...
HAL: explicitly include soc_caps.h
Closes IDFGH-4547
See merge request espressif/esp-idf!11895
2021-01-11 14:18:10 +08:00
Marius Vikhammer
58c3f6a421
hal: explicitly include soc_caps.h
...
Many files in the HAL layer depended on SOC_ macros without
explicitly including soc_caps.h
2021-01-07 10:13:17 +08:00
morris
1f9629da9f
hal: put cpu_ll_get_core_id to IRAM
2021-01-05 15:39:46 +08:00
morris
9e7d2c0065
esp32c3: format and clean up interrupt and os port code
2021-01-05 15:39:46 +08:00
Felipe Neves
5d316ac142
interrupt: added INTC FLEXIBLE capabillity to esp32c3 CPU caps
2021-01-05 15:39:46 +08:00
Felipe Neves
09bc1580be
intr_allocator: add abstractions for priority, type and edge-ack interrupt controller functions
2021-01-05 15:39:46 +08:00
Angus Gratton
f09b8ae7a4
driver: Add esp32c3 ADC driver
...
Based on internal commit 3ef01301fffa552d4be6d81bc9d199c223224305
2020-12-23 09:53:24 +11:00
Michael (XIAO Xufeng)
40b08e33c9
Merge branch 'bugfix/touch_sensor_reading_error_in_light_sleep_process' into 'master'
...
driver(touch): fix touch sensor false trigger in sleep mode
See merge request espressif/esp-idf!10983
2020-12-14 14:51:51 +08:00
fuzhibo
985e94139d
driver(touch): fix touch sensor false trigger in sleep mode
2020-12-10 17:43:14 +08:00
Marius Vikhammer
457ce080ae
AES: refactor and add HAL layer
...
Refactor the AES driver and add HAL, LL and caps.
Add better support for running AES-GCM fully in hardware.
2020-12-10 09:04:47 +00:00
Michael (XIAO Xufeng)
04d6b115ae
adc: fixed efuse called in critical section issue
2020-12-08 17:41:49 +08:00
Armando
f80bcb733a
uart: modify s3 ll functions of reading/writing fifo
2020-11-30 15:23:15 +11:00
Angus Gratton
7c08be5771
hal: Add initial ESP32-C3 support
...
From internal commit 7761d6e8
2020-11-30 15:23:15 +11:00
Armando
05a4a8d864
uart: seperate sclk and baudrate setting
2020-11-24 19:12:52 +08:00
Armando
fb8b905539
uart: add uart support on esp32s3
2020-11-24 19:12:51 +08:00
Michael (XIAO Xufeng)
caf83b88ba
Merge branch 'feature/bringup_i2c_for_s3' into 'master'
...
I2C: Add support for esp32s3 and add source clock allocator
Closes IDF-2011
See merge request espressif/esp-idf!10923
2020-11-12 22:12:58 +08:00
Cao Sen Miao
6eee601cf6
i2c: Add supports on esp32s3
2020-11-12 11:32:45 +08:00
morris
deea402cf4
timer: pooling update bit before reading count value
2020-11-12 10:31:38 +08:00
Angus Gratton
66fb5a29bb
Whitespace: Automated whitespace fixes (large commit)
...
Apply the pre-commit hook whitespace fixes to all files in the repo.
(Line endings, blank lines at end of file, trailing whitespace)
2020-11-11 07:36:35 +00:00
Angus Gratton
3882c2b8ed
Merge branch 'feature/bringup_esp32s3_fpga_update_rmt_driver' into 'master'
...
rmt: support esp32s3
Closes IDF-1773
See merge request espressif/esp-idf!10292
2020-11-07 07:15:53 +08:00
Michael (XIAO Xufeng)
d7ce8a537f
Merge branch 'feature/bringup_esp32s3_fpga_rtc_sleep' into 'master'
...
feature (rtc): update rtc related code(rtc_sleep rtc_init) to support esp32s3
See merge request espressif/esp-idf!10404
2020-11-05 19:19:36 +08:00
morris
ff976867b3
rmt: split TX and RX in LL driver
...
Split TX and RX function in LL driver.
Channel number is encoded in driver layer.
Added channel signal list in periph.c
2020-11-05 19:00:55 +08:00
chenjianqiang
9465af0066
rmt: support esp32s3
2020-11-05 19:00:55 +08:00
fuzhibo
93c7cf094e
rtc: update rtc related code(rtc_sleep rtc_init) to support esp32s3
2020-11-04 02:43:41 +00:00
morris
e4c8ec6174
timergroup: move interrupt index into peripheral description file
...
1. Added timer_group_periph.c file, describing module global signals
(e.g. interrupt index)
2. Added more caps in soc_caps.h
2020-11-03 18:16:50 +08:00
Michael (XIAO Xufeng)
35faecea1d
Merge branch 'feature/support_sigma_delta_on_s3' into 'master'
...
sigma_delta: add periph signal list and support esp32-s3
See merge request espressif/esp-idf!10945
2020-10-30 17:22:02 +08:00
Michael (XIAO Xufeng)
8337f0afa2
spi_flash: fix LL of esp32s3 and add 32-bit support
2020-10-29 18:21:42 +08:00
morris
17808b3ff8
sigma_delta: add periph signal list and support esp32-s3
2020-10-29 11:06:28 +08:00
morris
d084ef4473
gdma: fix wrong m2m mode wrong config
2020-10-27 16:53:19 +08:00
Michael (XIAO Xufeng)
9a394e1aa0
Merge branch 'feature/spi_bringup_esp32s3' into 'master'
...
spi: bringup on esp32s3
See merge request espressif/esp-idf!10107
2020-10-27 00:51:42 +08:00
Michael (XIAO Xufeng)
bcb5c3506d
Merge branch 'feature/dedicated_gpio' into 'master'
...
Dedicated GPIO driver on ESP32-S2 and ESP32-S3
Closes IDF-1672
See merge request espressif/esp-idf!8716
2020-10-26 15:33:33 +08:00
Armando
f7e91ef6c1
spi: esp32s3 bringup for spi
2020-10-26 11:28:34 +08:00
Renz Bagaporo
e7460c1f00
soc: remove unecessary headers in dport_access.h
2020-10-22 19:42:34 +08:00
morris
bb1369b922
dedicated gpio: add driver
2020-10-20 21:06:09 +08:00
morris
74d78148bc
pcnt: add pcnt peripheral signal connections
...
pcnt: fix bug in clear interrupt status
2020-10-19 11:56:18 +08:00
Michael (XIAO Xufeng)
647dea9395
soc: combine xxx_caps.h into one soc_caps.h
...
During HAL layer refactoring and new chip bringup, we have several
caps.h for each part, to reduce the conflicts to minimum. But this is
The capabilities headers will be relataive stable once completely
written (maybe after the featues are supported by drivers).
Now ESP32 and ESP32-S2 drivers are relative stable, making it a good
time to combine all these caps.h into one soc_caps.h
This cleanup also move HAL config and pin config into separated files,
to make the responsibilities of these headers more clear. This is
helpful for the stabilities of soc_caps.h because we want to make it
public some day.
2020-10-17 16:10:15 +08:00
fuzhibo
6773df88f2
feature(rtc): rename i2c_xxx to regi2c_xxx
2020-10-14 21:15:24 +08:00
Marius Vikhammer
949fb8e63a
SHA: add HAL layer and refactor driver
...
Add a LL and HAL layer for SHA.
2020-10-09 08:24:08 +00:00
Michael (XIAO Xufeng)
fe37db3271
esp_flash: fix the incorrect check_idle logic in LL and chip_driver
2020-10-02 05:34:36 +00:00
Angus Gratton
83a7891f84
Merge branch 'feature/intr_alloc' into 'master'
...
feature/intr_alloc: moved interrupt allocator to the esp-system and refactored it moving all platform specific code to its place
Closes IDF-1913
See merge request espressif/esp-idf!10267
2020-09-30 07:44:12 +08:00
Felipe Neves
2e826b7a8f
intr_alloc: split interrupt allocator into common-code and platform-code
...
esp_system: removed repeated interrupt allocator code and moved common code to esp_system
xtens: moved xtensa specific code from freertos to the xtensa component
hal/interrupt_controller: added interrupt controller hal and ll files
docs: update the doxyfile with new location of esp_itr_alloc.h file
xtensa: fixed dangerous relocation problem after moving xtensa interrupt files out of freertos
docs: removed Xtensa reference from intr_allocator api-reference
xtensa: pushed the interrupt function that manages non iram interrupts to the xtensa layer
esp_system/test: fixed platform dependent setting for intr_allocator tests
hal: rename the functions used to manage non iram interrupt mask.
2020-09-30 07:44:12 +08:00
Marius Vikhammer
4d57a5c2c7
gdma: fix incorrect calculation of tx fifo size
2020-09-25 16:15:56 +08:00
Armando
1e1beb69aa
spi: fix build fail issue when target is esp32s3
2020-09-24 10:51:23 +08:00
Marius Vikhammer
bff0016eb8
crypto accelerator support on esp32s3
...
SHA: passing unit tests
RSA: pass tests
AES: tests passing
2020-09-22 15:15:03 +08:00
morris
cc66334014
esp_timer: initial support on esp32-s3
2020-09-22 15:15:03 +08:00
morris
75a372a9f0
unit_test: support reference clock, test delay function
2020-09-22 15:15:03 +08:00
morris
61f89b97c6
bringup esp32-s3 on FPGA
2020-09-22 15:15:03 +08:00
Wielebny666
db6fbba73e
spi_master: correctly set cs polarity
...
All devices must be added to the same spi line before use.
Partly solve this problem: https://github.com/espressif/esp-idf/pull/5490
2020-09-17 12:05:57 +00:00
morris
a3cc43485f
async memcpy: support async memcopy on esp32s2/s3
...
Added async memory copy API:
on esp32-s2, the implementation is based on CP_DMA
on esp32-s3, the implementation is based on GDMA
2020-09-16 21:30:54 +08:00
Marius Vikhammer
b2f390df01
hal: update link to HAL readme.md
...
The HAL readme was moved during refactoring, but links were not updated.
2020-09-11 15:48:08 +08:00
Michael (XIAO Xufeng)
ea63bd3de4
Merge branch 'feat/extract_hal_from_soc' into 'master'
...
hal: extract hal component from soc component
See merge request espressif/esp-idf!9992
2020-09-01 23:56:15 +08:00
Michael (XIAO Xufeng)
5425ef4ee4
hal: extract hal component from soc component
2020-09-01 13:25:32 +08:00