Some components were including esp_timer.h without declaring a
dependency on esp_timer component. This used to work due to a
transitive public dependency on esp_timer from freertos component.
Add explicit dependencies where needed.
Also some source files were using esp_timer functions without
including the header file. This used to work because esp_timer.h was
included from freertos port header file. This commit adds esp_timer.h
includes where needed.
Moved the following kconfig options out of the target component:
* CONFIG_ESP*_DEFAULT_CPU_FREQ* -> esp_system
* ESP*_REV_MIN -> esp_hw_support
* ESP*_TIME_SYSCALL -> newlib
* ESP*_RTC_* -> esp_hw_support
Where applicable these target specific konfig names were merged into
a single common config, e.g;
CONFIG_ESP*_DEFAULT_CPU_FREQ -> CONFIG_ESP_DEFAULT_CPU_FREQ_MHZ
1. Clean up clk usage in IDF, replace rtc_clk_xtal/apb_freq_get with
upper level API esp_clk_xtal/apb_freq
2. Fix small errors and wrong comments related to clock
3. Add clk_tree_defs.h to provide an unified clock id for each chip
Modify the NGed drivers to adopt new clock ids
esp-system: removed esp_phy and nvs dependencies, change app update and pm to weak dependencies
Closes IDF-4656
See merge request espressif/esp-idf!17092
- For CONFIG_SPIRAM_MALLOC_ALWAYSINTERNAL < 92, the ipc_task semaphores
were allocated on SPIRAM rather than internal RAM
- SemaphoreHandle_t has a size of 92, thus the failure
IDF FreeRTOS uses vTaskSuspendAll()/xTaskResumeAll() to stop preemption
on a particular core. However, those functions behave differently in FreeRTOS SMP.
This commit replaces all calls of vTaskSuspendAll()/xTaskResumeAll() with
vTaskPreemptionDisable()/vTaskPreemptionEnable() when compiling with SMP FreeRTOS.
This commit updates the visibility of various header files and cleans up
some unnecessary inclusions. Also, this commit removes certain header
include paths which were maintained for backward compatibility.
If a windowoverflow8 happened after changing the SP, the exception handler would look for
the extra save area by looking at the previous frame's SP. This SP would be a garbage value
and could cause the windowoverflow exception to write to invalid memory ares.
Moved the following kconfig options out of the target component:
* ESP32_X_BROWNOUT_* -> esp_system
* ESP32_X_DEBUG_OCDAWARE -> esp_system
* APP_NO_BLOBS -> build type (main kconfig)
ESP32H2 doesn't support access to RTC memory through various buses, thus .rtc.dummy section
makes no sense here. The section is used for blind padding in LD script - to provide proper section offsets)
This commit removes the usage of all legacy FreeRTOS data types that
are exposed via configENABLE_BACKWARD_COMPATIBILITY. Legacy types can
still be used by enabling CONFIG_FREERTOS_ENABLE_BACKWARD_COMPATIBILITY.
Upstream xtensa exception handling will save PS, PC, and a0 registers
together when saving a minimal context. This commit ppdates the xtensa
exception handling to match upstream behavior.
This commit refactors the ulp component.
Files are now divided based on type of ulp, viz., fsm or risc-v.
Files common to both are maintained in the ulp_common folder.
This commit also adds menuconfig options for ULP within the ulp
component instead of presenting target specific configuations for ulp.
The following files were deleted:
- components/esp_hw_support/include/soc/cpu.h
- components/soc/esp32s3/include/soc/cpu.h
The following functions are deprecated:
- get_sp()
The following functions declared in soc/cpu.h are now moved to esp_cpu.h:
- esp_cpu_configure_region_protection()
The following functions declared in soc/cpu.h are now moved to components/xtensa/include/esp_cpu_utils.h:
- esp_cpu_process_stack_pc()
All files with soc/cpu.h inclusion are updated to include esp_cpu.h instead.
Signed-off-by: Sudeep Mohanty <sudeep.mohanty@espressif.com>
This bugfix contains 3 fixes:
1. .rtc_dummy section is removed (not needed for C3)
2. .rtc_text section is padded with 16B for possible CPU prefetch
3. .rtc_text section is aligned to 4B boundary to comply with PMS Memprot requirements
"can set sleep wake stub from stack in RTC RAM" would randomly fail on S3 due to stack overflow.
Fixed wrong usage of stack size and slightly increased it.
This commit updates the chip independent system chapters of the
programming guide for esp32s3.
Signed-off-by: Sudeep Mohanty <sudeep.mohanty@espressif.com>
peripheral enable/disable usually should be managed by driver itself,
so make it as espressif private APIs, not recommended for user to use it
in application code.
However, if user want to re-write the driver or ports to other platform,
this is still possible by including the header in this way:
"esp_private/peripheral_ctrl.h"
esp_restart()/panic_restart() never resets the Digital system (so far required only by the Memprot feature) as there's a typo in the corresponding #define:
it checks CONFIG_ESP_SYSTEM_CONFIG_MEMPROT_FEATURE instead of CONFIG_ESP_SYSTEM_MEMPROT_FEATURE.
Issue fixed.
IDF-4094
In 4972605, high-level interrupt handler hook was renamed from
ld_include_highint_hdl to ld_include_panic_highint_hdl. However the
change wasn't applied in GNU Make based build system. As a result,
the default interrupt handler was linked and features which depended
on the high-level interrupt didn't work.
Closes https://github.com/espressif/esp-idf/issues/7759
Closes https://github.com/espressif/esp-idf/issues/7447
This commit removes the following critical nested macros as follows:
- portENTER_CRITICAL_NESTED()
- portEXIT_CRITICAL_NESTED()
They are replaced with portSET_INTERRUPT_MASK_FROM_ISR() and
portCLEAR_INTERRUPT_MASK_FROM_ISR() which are the proper FreeRTOS interfaces.
Created a portmacro_deprecated.h for each port to contain deprecated API
that were originally from portmacro.h
There was race condition where interrupt entries set by APP cpu core
could have been cleared during PRO cpu startup.
This was observed while setting up "cache access error" interrupt in
SMP mode for ESP32-S3.
This fix allows to NOT modify or clear any entries set by other core
(APP or PRO) and thus avoiding any race conditions during startup code.
As branches/jumps on Xtensa have a maximum range for the destination, it is
unsafe to refer to a label to another compilation unit in a branch/jump instruction.
The labels have been replaced by absolute addresses.
Clang warns that the original code wouldn't have any effect:
warning: indirection of non-volatile null pointer will be deleted,
not trap [-Wnull-dereference]
note: consider using __builtin_trap() or qualifying pointer
with 'volatile'
__builtin_trap translates to 'break 1, 15' instruction on Xtensa,
which might be okay in this case. However to absolutely certainly not
break anything for GCC builds, add 'volatile' instead.
components/os: Move ETS_T1_WDT_INUM, ETS_CACHEERR_INUM and ETS_DPORT_INUM to l5 interrupt
components/os: high level interrupt(5)
components/os: hli_api: meta queue: fix out of bounds access, check for overflow
components/os: hli: don't spill registers, instead save them to a separate region
Level 4 interrupt has a chance of preempting a window overflow or underflow exception.
Therefore it is not possible to use standard context save functions,
as the SP on entry to Level 4 interrupt may be invalid (e.g. in WindowUnderflow4).
Instead, mask window overflows and save the entire general purpose register file,
plus some of the special registers.
Then clear WindowStart, allowing the C handler to execute without spilling the old windows.
On exit from the interrupt handler, do everything in reverse.
components/bt: using high level interrupt in lc
components/os: Add DRAM_ATTR to avoid feature `Allow .bss segment placed in external memory`
components/bt: optimize code structure
components/os: Modify the BT assert process to adapt to coredump and HLI
components/os: Disable exception mode after saving special registers
To store some registers first, avoid stuck due to live lock after disabling exception mode
components/os: using dport instead of AHB in BT to fix live lock
components/bt: Fix hli queue send error
components/bt: Fix CI fail
# Conflicts:
# components/bt/CMakeLists.txt
# components/bt/component.mk
# components/bt/controller/bt.c
# components/bt/controller/lib
# components/esp_common/src/int_wdt.c
# components/esp_system/port/soc/esp32/dport_panic_highint_hdl.S
# components/soc/esp32/include/soc/soc.h
PMS aware chips require prefetch padding size for instruction fetch, or
some memory alignment considerations. These settings are now exposed
through kconfig options (hidden) and used through common ld template.
This shall help to add and manage future chips support easily for
these considerations.
Closes IDF-3624
Add Kconfig option SPIRAM_ALLOW_NOINIT_EXTERNAL_MEMORY
When enabled, a new linker script rule (from esp32.extram.noinit.ld)
places any variables in the .ext_ram.noinit section in SPIRAM.
This section is exempted from the startup SPIRAM memory test and is
not zero-initialized or added to the malloc pool, making it usable
for noinit variables that persist across reset.
The EXT_RAM_NOINIT_ATTR macro places variables in this section.
IRAM section didn't contain sufficient padding for possible CPU instruction prefetch,
ie instruction fetch could happen in DRAM section which is prohibited by the Memprot module.
This is fixed by adding 16B to the end of IRAM section in LD script (C3 CPU prefetch buffer depth is 4 words)
Closes IDF-3554
* fix
eh_frame_parser is architecture independent, thus the files have
been rearchitectured. Some bugs have been fixed in the test.
A README file has also been added to eh_frame_parser host test
directory.
eh_frame_parser is now able to detect empty gaps in .eh_frame_hdr
table (missing DWARF information).
Fix a bug occuring when parsing backtraces originated from abort().
Fix build missing dependencies issue.
Add .eh_frame and .eh_frame_hdr sections to the binary (can be
enabled/disabled within menuconfig). These sections are parsed
when a panic occurs. Their DWARF instructions are decoded and
executed at runtime, to retrieve the whole backtrace. This
parser has been tested on both RISC-V and x86 architectures.
This feature needs esptool's merge adjacent ELF sections feature.
Copy the esp32c3 code without any change:
* components/esp_hw_support/include/soc/esp32h2
* components/esp_hw_support/port/esp32h2
* components/esp_system/port/soc/esp32h2
This is mostly important on ESP32 ECO3 with the
ESP32_ECO3_CACHE_LOCK_FIX, because when we stall the other CPU core
before we disable the TG1 WDT then the first CPU can get stuck
in WDT ISR handle_livelock_int routine waiting for the other CPU.
* This function has been accidentally removed.
It is necessary to provide the emergency
exception memory pool size for C++ code.
Since our libstdc++ always has exceptions
enabled, this function must exist here even if
-fno-exception is set for user code.
