The change fixes thread-local-storage size by removing .srodata section
from it. It initially was included in TLS section by mistake.
The issue was found when stack size increased after building applications
with GCC-11.1 compiler. Stack size became bigger because some new data
appeared in .srodata. See more details here:
adce62f53d
SMP FreeRTOS uses a single kernel lock for all critical sections. There is a known
issue with esp_ipc_isr_stall_other_cpu() that can cause dead if the other CPU is
already in a critical section.
This commit adds a temporary workaround to reduce the chance of deadlock by taking
the SMP FreeRTOS kernel lock first before stalling the other CPU.
See IDF-5257 for more details.
The previously used splits between memory allocated for ROM code,
2nd stage bootloader and the app were somewhat safe and conservative.
This resulted in some space being unavailable for static allocation
in the app.
This commit increases the space available for static allocation to the
maximum possible amount.
1. Some of the ROM code static allocation is only used in UART/USB/SPI
download modes. This region ("shared buffers") has been placed at
the lower end of ROM memory area, to be reusable in flash boot
mode. The 2nd stage bootloader linker script is modified to "pack"
all sections exactly up to the end but with roughly 8K margin between
startup stacks.
2. Instead of calculating the sections placement and hardcoding the
addresses in the LD script again, rewrite it to calculate the
start address of each memory region automatically based on the
logic above.
3. Adjust the app memory layout (SRAM_IRAM_END) accordingly,
increasing the space available for static allocation.
Overall these changes increase the space available for static
allocation by about 78kB.
The downside of these changes is that the 2nd stage bootloader .data
segment is now directly adjacent to the startup stack on the PRO CPU.
Previously, there was effectively about 78kB of extra stack space for
the PRO CPU, before the stack would run into the data segment.
This commit makes changes to cpu_ll.h, cpu_hal.h, and interrupt_controller_hal.h:
- Moved to esp_hw_support in order to be deprecated in the future
- HAL/LL API now route their calls to esp_cpu.h functions instead
Also updated soc_hal.h as follows:
- Removed __SOC_HAL_..._OTHER_CORES() macros as they dependend on cpu_hal.h
- Made soc_hal.h and soc_ll.h interfaces always inline, and removed soc_hal.c.
This commit also updates the XCHAL_ERRATUM_572 workaround by
- Removing it's HAL function and invoking the workaround it directly the bootloader
- Added missing workaround for the ESP32-S3
Was: Backtrace: N:M N:M N:M ...
Now: Backtrace:N:MN:M N:M ...
The problem with the new format is that it is hard to parse and
breaks the parser that is used by PlatformIO. The old format
is much more reasonable. I do not see how the pattern in IDFDUT.py
can work with the new format, due to the missing space after the :
This updates the minimal supported version of CMake to 3.16, which in turn enables us to use more CMake features and have a cleaner build system.
This is the version that provides most new features and also the one we use in our latest docker image for CI.
The behavior of portSET_INTERRUPT_MASK_FROM_ISR() has changed in SMP FreeRTOS. It's
previous behavior is now implemented in portDISABLE_INTERRUPTS() and portRESTORE_INTERRUPTS().
This commit replaces all portSET_INTERRUPT_MASK_FROM_ISR() and portCLEAR_INTERRUPT_MASK_FROM_ISR()
calls with portDISABLE_INTERRUPTS() and portRESTORE_INTERRUPTS() respectively
When configNUM_CORES = 1, vTaskCoreAffinityGet() is not defined. This
commit fixes the TWDT to omit calls to vTaskCoreAffinityGet() when building
for unicore.
This commit does the following:
- Update existing unit tests that use the TWDT to call the new
esp_task_wdt_init() API
- Add a set of dedicate TWDT unit tests
- Updates the TWDT example
This commit moidifies the TWDT as follows:
- Adds a feature to allows subscribing arbitrary users to the TWDT
- Changes esp_task_wdt_init() API to accept configuration structure
- Changes esp_task_wdt_init() and esp_task_wdt_deinit() to subscribe/unsubscribe
idle tasks of various cores.
- Adds support for SMP FreeRTOS idle tasks
- Updates startup code TWDT initialization
- Updates API documentation
This commit refactors the task watchdog as follows:
- Renamed variables, types, and functions
- Replaced manual linked list implementation with SLIST()
- Moved calloc()/free() calls out of critical sections
- Shortened ISR critical sections
- Updated API description
- Updated code formatting
spi_flash: refactor spi_flash clock configuration logic and support esp32c2
Closes IDF-4474, IDF-4025, and IDF-4066
See merge request espressif/esp-idf!16602
Some components were including esp_timer.h without declaring a
dependency on esp_timer component. This used to work due to a
transitive public dependency on esp_timer from freertos component.
Add explicit dependencies where needed.
Also some source files were using esp_timer functions without
including the header file. This used to work because esp_timer.h was
included from freertos port header file. This commit adds esp_timer.h
includes where needed.
Moved the following kconfig options out of the target component:
* CONFIG_ESP*_DEFAULT_CPU_FREQ* -> esp_system
* ESP*_REV_MIN -> esp_hw_support
* ESP*_TIME_SYSCALL -> newlib
* ESP*_RTC_* -> esp_hw_support
Where applicable these target specific konfig names were merged into
a single common config, e.g;
CONFIG_ESP*_DEFAULT_CPU_FREQ -> CONFIG_ESP_DEFAULT_CPU_FREQ_MHZ
1. Clean up clk usage in IDF, replace rtc_clk_xtal/apb_freq_get with
upper level API esp_clk_xtal/apb_freq
2. Fix small errors and wrong comments related to clock
3. Add clk_tree_defs.h to provide an unified clock id for each chip
Modify the NGed drivers to adopt new clock ids
esp-system: removed esp_phy and nvs dependencies, change app update and pm to weak dependencies
Closes IDF-4656
See merge request espressif/esp-idf!17092
- For CONFIG_SPIRAM_MALLOC_ALWAYSINTERNAL < 92, the ipc_task semaphores
were allocated on SPIRAM rather than internal RAM
- SemaphoreHandle_t has a size of 92, thus the failure
IDF FreeRTOS uses vTaskSuspendAll()/xTaskResumeAll() to stop preemption
on a particular core. However, those functions behave differently in FreeRTOS SMP.
This commit replaces all calls of vTaskSuspendAll()/xTaskResumeAll() with
vTaskPreemptionDisable()/vTaskPreemptionEnable() when compiling with SMP FreeRTOS.
This commit updates the visibility of various header files and cleans up
some unnecessary inclusions. Also, this commit removes certain header
include paths which were maintained for backward compatibility.
If a windowoverflow8 happened after changing the SP, the exception handler would look for
the extra save area by looking at the previous frame's SP. This SP would be a garbage value
and could cause the windowoverflow exception to write to invalid memory ares.
Moved the following kconfig options out of the target component:
* ESP32_X_BROWNOUT_* -> esp_system
* ESP32_X_DEBUG_OCDAWARE -> esp_system
* APP_NO_BLOBS -> build type (main kconfig)
ESP32H2 doesn't support access to RTC memory through various buses, thus .rtc.dummy section
makes no sense here. The section is used for blind padding in LD script - to provide proper section offsets)
This commit removes the usage of all legacy FreeRTOS data types that
are exposed via configENABLE_BACKWARD_COMPATIBILITY. Legacy types can
still be used by enabling CONFIG_FREERTOS_ENABLE_BACKWARD_COMPATIBILITY.
Upstream xtensa exception handling will save PS, PC, and a0 registers
together when saving a minimal context. This commit ppdates the xtensa
exception handling to match upstream behavior.
This commit refactors the ulp component.
Files are now divided based on type of ulp, viz., fsm or risc-v.
Files common to both are maintained in the ulp_common folder.
This commit also adds menuconfig options for ULP within the ulp
component instead of presenting target specific configuations for ulp.
The following files were deleted:
- components/esp_hw_support/include/soc/cpu.h
- components/soc/esp32s3/include/soc/cpu.h
The following functions are deprecated:
- get_sp()
The following functions declared in soc/cpu.h are now moved to esp_cpu.h:
- esp_cpu_configure_region_protection()
The following functions declared in soc/cpu.h are now moved to components/xtensa/include/esp_cpu_utils.h:
- esp_cpu_process_stack_pc()
All files with soc/cpu.h inclusion are updated to include esp_cpu.h instead.
Signed-off-by: Sudeep Mohanty <sudeep.mohanty@espressif.com>
This bugfix contains 3 fixes:
1. .rtc_dummy section is removed (not needed for C3)
2. .rtc_text section is padded with 16B for possible CPU prefetch
3. .rtc_text section is aligned to 4B boundary to comply with PMS Memprot requirements
"can set sleep wake stub from stack in RTC RAM" would randomly fail on S3 due to stack overflow.
Fixed wrong usage of stack size and slightly increased it.
This commit updates the chip independent system chapters of the
programming guide for esp32s3.
Signed-off-by: Sudeep Mohanty <sudeep.mohanty@espressif.com>
peripheral enable/disable usually should be managed by driver itself,
so make it as espressif private APIs, not recommended for user to use it
in application code.
However, if user want to re-write the driver or ports to other platform,
this is still possible by including the header in this way:
"esp_private/peripheral_ctrl.h"
esp_restart()/panic_restart() never resets the Digital system (so far required only by the Memprot feature) as there's a typo in the corresponding #define:
it checks CONFIG_ESP_SYSTEM_CONFIG_MEMPROT_FEATURE instead of CONFIG_ESP_SYSTEM_MEMPROT_FEATURE.
Issue fixed.
IDF-4094
In 4972605, high-level interrupt handler hook was renamed from
ld_include_highint_hdl to ld_include_panic_highint_hdl. However the
change wasn't applied in GNU Make based build system. As a result,
the default interrupt handler was linked and features which depended
on the high-level interrupt didn't work.
Closes https://github.com/espressif/esp-idf/issues/7759
Closes https://github.com/espressif/esp-idf/issues/7447
This commit removes the following critical nested macros as follows:
- portENTER_CRITICAL_NESTED()
- portEXIT_CRITICAL_NESTED()
They are replaced with portSET_INTERRUPT_MASK_FROM_ISR() and
portCLEAR_INTERRUPT_MASK_FROM_ISR() which are the proper FreeRTOS interfaces.
Created a portmacro_deprecated.h for each port to contain deprecated API
that were originally from portmacro.h
There was race condition where interrupt entries set by APP cpu core
could have been cleared during PRO cpu startup.
This was observed while setting up "cache access error" interrupt in
SMP mode for ESP32-S3.
This fix allows to NOT modify or clear any entries set by other core
(APP or PRO) and thus avoiding any race conditions during startup code.
As branches/jumps on Xtensa have a maximum range for the destination, it is
unsafe to refer to a label to another compilation unit in a branch/jump instruction.
The labels have been replaced by absolute addresses.
Clang warns that the original code wouldn't have any effect:
warning: indirection of non-volatile null pointer will be deleted,
not trap [-Wnull-dereference]
note: consider using __builtin_trap() or qualifying pointer
with 'volatile'
__builtin_trap translates to 'break 1, 15' instruction on Xtensa,
which might be okay in this case. However to absolutely certainly not
break anything for GCC builds, add 'volatile' instead.
