morris
373d9b3dbc
Merge branch 'feature/default_clk_for_gptimer' into 'master'
...
clk_tree: added default clock source for peripherals (GPTimer, RMT, LCD, TempSensor)
Closes IDF-4894
See merge request espressif/esp-idf!17759
2022-04-19 18:02:40 +08:00
songruojing
534346f4bb
ledc: Provide support for esp32c2 and esp32h2
...
LEDC examples, unit test, and programming guide are all updated.
2022-04-14 08:15:14 +00:00
morris
f32a89826c
clk_tree: added default clock source for peripheral
2022-04-14 15:44:56 +08:00
morris
cc71e645be
Merge branch 'feature/ksz8863rll_support' into 'master'
...
ESP IDF infrastructure preparation for ksz8863rll support
See merge request espressif/esp-idf!17203
2022-04-14 10:51:27 +08:00
songruo
60bb5c913d
clk_tree: prework of introducing clk subsystem control
...
1. Clean up clk usage in IDF, replace rtc_clk_xtal/apb_freq_get with
upper level API esp_clk_xtal/apb_freq
2. Fix small errors and wrong comments related to clock
3. Add clk_tree_defs.h to provide an unified clock id for each chip
Modify the NGed drivers to adopt new clock ids
2022-04-11 12:09:06 +08:00
Ondrej Kosta
4051b80b4d
esp_netif: remove dependency of L2 TAP Interface from netif_lwip
...
esp_eth: extended infrastructure to optionally provide more advanced access to MAC/PHY layers
2022-04-08 16:40:29 +02:00
Armando
a8a47a61f5
spi_flash: move buffer check from hal layer to driver layer
...
Prior to this change, `spi_flash_hal_supports_direct_write` and
`spi_flash_hal_supports_direct_read` will check the buffer pointer
place, which should be done in driver layer, instead of HAL layer.
2022-04-08 11:46:10 +08:00
Armando
c4bcf1117c
esp_hw_support: move soc_memory_types.h helper functions into esp_hw_support
2022-04-08 11:46:10 +08:00
laokaiyao
f17edba20b
i2s: extract std/pdm/tdm modes
...
Type structures of these modes are defined. Driver and HAL layer are modified to fit these concepts.
2022-03-22 10:14:45 +08:00
Armando
386363cafd
adc: unify adc_ll_num_t and adc_unit_t
2022-03-18 11:36:50 +08:00
Armando (Dou Yiwen)
6ed3ffbbf1
Merge branch 'refactor/remove_redundant_rom_cache_dependency' into 'master'
...
cache: remove redundant rom cache dependency in bootloader
Closes IDF-4523
See merge request espressif/esp-idf!17077
2022-03-12 10:11:39 +08:00
Armando
c1cbd7bbf6
cache/mmu: implememnt cache and mmu hal APIs in bootloader
2022-03-11 22:43:11 +08:00
morris
9f55712c03
rmt: document and improve LL driver
2022-03-09 10:58:12 +08:00
Sachin Parekh
bc1d35a14e
esp32c2/hal: Added ECC HAL layer
2022-03-08 14:05:23 +00:00
Simon
4bf4a020a6
Merge branch 'refactor/abstract_temperature_sensor' into 'master'
...
temperature_sensor: Refactor temperature sensor to new APIs (follow rule of driverNG) and support esp32s3
Closes IDF-3665, IDF-3367, and IDF-1793
See merge request espressif/esp-idf!16787
2022-03-07 20:17:39 +08:00
morris
a0283234cd
Merge branch 'feature/support_esp32h2_gpio' into 'master'
...
esp32h2: support GPIO peripheral, IO_MUX, GPIO matrix
Closes IDF-4232 and IDF-3439
See merge request espressif/esp-idf!16609
2022-03-04 18:22:28 +08:00
Cao Sen Miao
b248046bcb
Temperature_sensor: Create new temperature sensor API
2022-03-04 18:13:35 +08:00
songruojing
c8c137f2b7
esp32h2: support GPIO peripheral, IO_MUX, GPIO matrix.
...
Generic GPIO example is supported as well.
2022-03-04 11:25:05 +08:00
morris
ec8defaa96
pulse_cnt: new driver for PCNT peripheral
2022-03-03 22:38:32 +08:00
Song Ruo Jing
b665dcbe68
Merge branch 'feature/esp32c2h2_support_uart' into 'master'
...
UART: Provide support for esp32c2 and esp32h2
Closes IDF-3823, IDF-4154, and IDF-4221
See merge request espressif/esp-idf!16832
2022-03-03 11:45:10 +08:00
laokaiyao
b336a838b6
i2s: fix bug of switching mono/stereo mode by 'i2s_set_clk' on c3/s3
2022-03-02 03:34:25 +00:00
songruojing
24a60c12c6
uart: Provide support for esp32c2 and esp32h2
...
UART examples, unit test, and programming guide are all updated.
2022-03-02 11:29:13 +08:00
Kevin (Lao Kaiyao)
cc1d89ebba
Merge branch 'feature/i2c_support_on_esp8684_esp32h2' into 'master'
...
i2c: support i2c on esp32c2 and esp32h2
Closes IDF-3918
See merge request espressif/esp-idf!16444
2022-02-28 13:59:02 +08:00
Konstantin Kondrashov
44e5ac2c59
Merge branch 'feature/efuse_hal' into 'master'
...
hal: Adds efuse hal layer
See merge request espressif/esp-idf!16354
2022-02-28 13:38:43 +08:00
KonstantinKondrashov
9605f3eb1a
soc: Adds efuse hal
...
Replaced eFuse ROM funcs with hal layer
2022-02-24 22:20:09 +08:00
laokaiyao
7da023ceae
i2c: support esp32c2
2022-02-23 15:19:37 +08:00
morris
116197040f
i2s: update copyright
2022-02-21 21:28:48 +08:00
0xFEEDC0DE64
c86fba7919
Fix compiling when included from C++
2022-02-18 15:37:07 +01:00
Ondrej Kosta
7512bdecfe
Merge branch 'feature/emac_start_stop_test' into 'master'
...
test_emac: extended Ethernet start/stop stress test
Closes IDF-4540
See merge request espressif/esp-idf!16755
2022-02-15 13:23:01 +00:00
David Cermak
8da2e4088c
esp_eth: Update esp32's EMAC API to decouple driver and vendor config
2022-02-14 16:17:29 +00:00
David Cermak
1dc60730ee
esp_eth: ESP32 EMAC to use common DMA busrt size for both Tx and Rx
2022-02-14 16:17:29 +00:00
David Cermak
2553fb5845
esp_eth: Make EMAC DMA burst size configurable
...
Merges https://github.com/espressif/esp-idf/pull/7874
Closes https://github.com/espressif/esp-idf/issues/7380
2022-02-14 16:17:29 +00:00
Ondrej Kosta
e97fd4b076
esp_eth: EMAC start/stop optimization
2022-02-14 08:21:43 +01:00
morris
2ab7d92785
lcd: improve LL driver according to TRM
2022-01-24 18:58:37 +08:00
laokaiyao
cf049e15ed
esp8684: rename target to esp32c2
2022-01-19 11:08:57 +08:00
Ivan Grokhotkov
876f4d6a1c
vfs: add support for semihosting on ESP32-C3
2022-01-14 17:29:03 +01:00
Armando
6a74cb695d
spi: support spi on 8684
2022-01-12 11:30:29 +08:00
morris
869bed1bb5
soc: don't expose unstable soc header files in public api
2022-01-06 23:10:22 +08:00
morris
8cdcb4e291
rmt: move RMT item definition from soc to driver
2022-01-06 21:43:12 +08:00
Darian Leung
1aad12468a
usb: Hub Driver Update and Refactor
...
Hub Driver is refactored as follows:
This commit update and refactors the Hub Driver as follows:
- Refactored enumeration state machine and stage functions
- Enumeration stage is now incremented
- Combined transfer stages of enumeration into common functions
- Comments updated
- Fixed usbh_hal_disable_debounce_lock() that would cause root_port_handle_events()
to fail the HCD_PORT_CMD_RESET call because the previous port connection interrupt
was not cleared.
The following features were added to the Hub Driver
- Enumeration config descriptor is now fetched in two separate stages
- Header is fetched first to determine the wTotalLength of the descriptor
- Fetching the full descriptor will request exactly wTotalLength bytes
- This works around some non-compliant devices that will babble/return zero
when requesting a length > wTotalLength
- Closes https://github.com/espressif/esp-idf/issues/7799
- Enumeration now stores string descriptors
- The Manufacturer, Product, and Serial Number string descriptors are
now read and stored during enumeration
- String descriptors are now part of usb_device_info_t
- Added unit test to test enumeration
2022-01-06 15:11:13 +08:00
Darian Leung
854127a57c
usb: USB Host stack uses USB PHY driver
...
This commit updates the USB Host stack to use the USB PHY driver. The
USB PHY and the OTG Controller should now both be setup/deleted using
usb_new_phy() and usb_del_phy() respectively.
- The hcd_install() now expects the USB PHY and OTG Contorller to be
already setup before it is called
- usb_host_install() now has an option to skip calling usb_del_phy() if
the user wants to setup their own USB PHY (e.g., in the case of using
and external PHY).
- CDC-ACM and MSC examples/test updated to use internal PHY
Closes https://github.com/espressif/esp-idf/issues/8061
2022-01-06 15:09:39 +08:00
Ondrej Kosta
fa9cc49b9e
Merge branch 'bugfix/esp_eth_start_tx_buff' into 'master'
...
Fixed ESP32 EMAC driver `insufficient TX buffer size`
Closes WIFI-4194
See merge request espressif/esp-idf!16457
2022-01-05 09:40:12 +00:00
songruojing
e0bc3a923c
esp8684: support GPIO peripheral, IO_MUX, GPIO matrix.
...
Generic GPIO example and GPIO unit test on esp8684 are both supported as well.
2021-12-29 22:01:45 +08:00
laokaiyao
4f28b33bbc
apll: add lock for apll
2021-12-29 10:13:13 +08:00
Ondrej Kosta
1150a11c56
Fixed ESP32 EMAC driver insufficient TX buffer size
which could followed esp_eth_stop and esp_eth_start sequence
2021-12-23 10:48:38 +01:00
morris
2c810f8451
timer: save alarm value in driver layer
2021-12-23 11:39:32 +08:00
Martin Vychodil
dd938eb952
System/Security: Memprot API unified (ESP32C3)
...
Unified Memory protection API for all PMS-aware chips (ESP32C3)
Closes JIRA IDF-3849
2021-12-21 01:50:36 +01:00
Armando
4dc0d6b2fe
adc: support adc dma driver on all chips
2021-12-16 00:19:15 +00:00
morris
89e37837d0
lcd: rgb pclk idle default to low
2021-11-30 13:44:06 +08:00
Ondrej Kosta
3a7a67f174
netif: added ESP-NETIF L2 TAP interface
2021-11-23 11:17:22 +01:00
Omar Chebib
aa2ca7dd94
LEDC: improved support for ESP32-C3 and refactored divisor calculation
...
As ESP32C3 does not have support for REF_TICK source clock, it is now not
possible to select it anymore.
Auto cfg clock has been improved for all boards.
2021-11-11 12:21:15 +08:00
morris
83d16aa00c
gdma: support IRAM interrupt
2021-11-08 16:14:51 +08:00
Cao Sen Miao
09487761cf
ESP8684: add freertos, hal, esp_system support
2021-11-06 17:33:44 +08:00
Alexey Gerenkov
bb9cd84cdc
debug_stubs: Refactor and add support for RISCV
2021-11-04 01:33:24 +03:00
Darian Leung
0c758c8557
usb: Fix how the HCD handles sudden disconnection
...
This commit fixes how the USB Host HCD handles sudden disconnections.
Bugs:
- HW channels remain active when the port suddenly disconnects, and
previously the channel would be disabled by setting the disabled bit,
then waiting for a disabled interrupt. However, ISOC channels do not
generate the disabled interrupt when the port is invalid, thus leading
to tasks getting indefinitely blocked in hcd_pipe_command().
Fix:
On a sudden disconnection, forcibly treat all channels as halted even
if their HCCHAR.ChEna bit is still set. We do a soft reset after a port
error anyways, so the channels will eventually be reset.
Closes https://github.com/espressif/esp-idf/issues/7505
2021-11-02 14:30:58 +08:00
Darian Leung
0159c37cf2
usb: Fix LL 8/16 bit register field access
...
This commit addes the 8/16 bit register field access workarounds to
the DWC_OTG peripheral. This workaround was applied to all other
peripherals in commit 874a720286
.
2021-11-02 14:30:58 +08:00
Jakob Hasse
7efb01846f
[cxx]: simple spi master class
...
* spi cxx unit test (CATCH-based, on host)
* added portmacro.h to driver mocking
* added simple testing app to write/read SPI,
using an MPU9250
2021-10-25 14:56:59 +08:00
morris
e2275b1f63
gptimer: clean up hal and ll for driver-ng
2021-10-20 18:40:08 +08:00
Kevin (Lao Kaiyao)
a9faafee3c
Merge branch 'feature/touch_sensor_driver_support_for_esp32s3' into 'master'
...
driver(touch): support touch sensor for esp32s3 platform
Closes IDF-1784 and IDF-3302
See merge request espressif/esp-idf!14102
2021-10-12 05:50:58 +00:00
morris
7283e349b9
Merge branch 'refactor/rgb_lcd_callback_add_event_data' into 'master'
...
lcd: modify callback prototype && build API docs
See merge request espressif/esp-idf!15354
2021-10-09 06:26:44 +00:00
laokaiyao
f4705f8eb4
touch sensor: update copyright notice
2021-10-08 11:45:57 +08:00
fuzhibo
057b9d61b5
driver(touch): support touch sensor for esp32s3 platform
2021-10-08 10:39:46 +08:00
morris
e09e39c94f
lcd: unify callback prototype
2021-10-02 14:23:31 +08:00
laokaiyao
7264c0e59a
i2s_rec_example: add support for esp32s3
2021-10-01 16:05:04 +01:00
Alex Lisitsyn
f40ae9cae9
Merge branch 'bugfix/fix_esp_restart_does_not_reset_timer_groups_periph' into 'master'
...
driver: fix esp_restart() does not reset timer group peripheral
Closes IDFGH-4652
See merge request espressif/esp-idf!12188
2021-09-16 11:45:42 +00:00
Alex Lisitsyn
c5d0d89508
driver: fix timer driver initialization sequence to not trigger interrupt immediately
...
add timer_hal_reset_periph()
fix timer_init() to reset timer counter during init
2021-09-16 19:45:33 +08:00
Armando (Dou Yiwen)
13b63cd9d2
Merge branch 'feature/support_adc_calibration_s3' into 'master'
...
adc: support adc calibration on s3
Closes IDF-1950, IDF-3730, and IDF-3036
See merge request espressif/esp-idf!15031
2021-09-14 08:51:03 +00:00
Armando
c45c6f52f1
adc: support adc efuse-based calibration on esp32s3
2021-09-14 11:42:50 +08:00
songruojing
1fcd639224
usb: Add usb_phy driver to support operations on USB PHY
2021-09-13 12:39:56 +08:00
morris
25f723765e
Merge branch 'feature/lcd_driver_follow_up' into 'master'
...
lcd: add PM lock
Closes IDF-3631, IDF-3704, and IDF-3317
See merge request espressif/esp-idf!14880
2021-09-10 03:14:50 +00:00
Wang Meng Yang
a885c42cda
Merge branch 'example/controller_hci_uart_for_esp32s3' into 'master'
...
examples: added support of ESP32-S3 chip in controller_hci_uart example
Closes BT-1906
See merge request espressif/esp-idf!14935
2021-09-08 06:02:18 +00:00
Cao Sen Miao
e85e9dc824
Merge branch 'feature/esp_flash_octal_api_support_xmic' into 'master'
...
esp_flash: Add new octal flash chip support in new chip driver (for MXIC)
Closes IDF-2859
See merge request espressif/esp-idf!14185
2021-09-08 03:59:34 +00:00
morris
02e470bc50
lcd: add pm lock
2021-09-08 11:34:46 +08:00
Cao Sen Miao
6c0aebe279
esp_flash: add opi flash support in esp_flash chip driver, for MXIC
2021-09-07 14:44:40 +08:00
Jiang Jiang Jian
316988bd2d
Merge branch 'feature/support_esp32s3_cpu_tagmem_retention' into 'master'
...
support esp32s3 cpu + tagmem retention
See merge request espressif/esp-idf!14579
2021-09-06 03:47:44 +00:00
Kevin (Lao Kaiyao)
2991eea97d
Merge branch 'refactor/i2s_driver' into 'master'
...
driver/i2s: bugfix and refactor for i2s
Closes IDF-3656 and IDF-3738
See merge request espressif/esp-idf!14704
2021-09-06 02:07:40 +00:00
laokaiyao
c5afd7ce34
i2s: fix write failure on ESP32 in 32bit slave mode
2021-09-03 17:36:44 +08:00
laokaiyao
0ff3dd9778
i2s: fix mono support issue
2021-09-02 14:33:36 +08:00
laokaiyao
b26da6f115
driver/i2s: refactor for i2s driver layer
2021-09-02 14:33:36 +08:00
Sachin Billore
f80d6f8c21
Digital Signature support for S3
...
Closes IDF-1791
2021-09-02 11:59:24 +05:30
Marius Vikhammer
bdf3a8ff29
Merge branch 'feature/xtwdt' into 'master'
...
WDT: Add support for XTAL32K Watchdog timer
Closes IDF-2575
See merge request espressif/esp-idf!15000
2021-09-02 02:44:47 +00:00
Marius Vikhammer
4869b3cd4a
WDT: Add support for XTAL32K Watchdog timer
2021-09-02 09:09:00 +08:00
Darian
8af7292496
Merge branch 'feature/new_usb_host_driver' into 'master'
...
(5) USB: Add public USB Host Driver
Closes IDF-3121, IDF-3509, and IDF-3557
See merge request espressif/esp-idf!13145
2021-08-30 09:28:43 +00:00
Li Shuai
ccf1a9a1fc
light sleep: add i/d-cache tagmem retention support for esp32s3
2021-08-27 11:11:09 +08:00
Li Shuai
03746de96f
light sleep: add cpu power down support for esp32s3
2021-08-27 11:11:06 +08:00
Martin Vychodil
58aed7df98
ESP32S2: No assert()/abort() in Memprot API, use esp_err_t instead
...
JIRA IDF-3634
2021-08-26 09:20:00 +02:00
wangmengyang
c053ef0541
examples: added support of ESP32-S3 chip in controller_hci_uart example
2021-08-26 14:24:32 +08:00
Darian Leung
accbaee57c
Add USB Host Library
...
This commit adds the preliminary version of the USB Host Library. This commit contains:
- USBH (USB Host Driver)
- Hub Driver that only supports a single device and device enumeration
- USB Host Library (asychronous API)
- Test cases for USB Host Library asychronous API
The following changes were made to the existing HCD:
- Removed HCD_PIPE_STATE_INVALID. Pipes are no longer invalidated
- Changed pipe commands to halt, flush, and clear. Pipes need to be manually
halted, flush, and cleared.
- Halting and flushing a pipe will execute the pipe callback if it causes a
HCD_PIPE_EVENT_URB_DONE event
2021-08-24 23:28:00 +08:00
morris
bb87fd8f08
Merge branch 'refactor/pcnt_driver_esp32s3' into 'master'
...
pcnt: soc update and hal refactor
See merge request espressif/esp-idf!14698
2021-08-20 04:23:15 +00:00
morris
71d475149d
lcd: update doc unit test and example to support 8-line spi
2021-08-19 16:40:22 +08:00
bizhuangyang
8143832041
spi_master:support octal mode for esp32s2 and esp32s3
...
Add support for 8-line spi for lcd on esp32s2 and esp32s3
Closes https://github.com/espressif/esp-idf/issues/6371
2021-08-19 16:40:22 +08:00
morris
56760c9669
pcnt: refactor hal driver
2021-08-10 17:19:21 +08:00
laokaiyao
f863998e90
driver/i2s: support mclk
2021-08-04 10:20:03 +08:00
laokaiyao
3c57a6ac36
driver/i2s: refactor ll and hal
2021-08-04 10:20:03 +08:00
laokaiyao
d51b85989b
doc/i2s: update i2s programming guide on s3 & c3
2021-08-04 10:20:03 +08:00
laokaiyao
f7f8c9c11f
driver/i2s: support i2s on c3 and s3
...
1. Support i2s on esp32c3 and esp32s3
2. Refactor i2s_config_t to avoid breaking change
2. Fix a bug that receiving unavailable values from message queue when dma queue has been re-allocted
4. Support i2s unit test on esp32c3 and esp32s3
2021-08-04 10:20:03 +08:00
houwenxiang
2f1247e1c4
driver: support I2S on ESP32-S3 & ESP32-C3
...
1. refactor I2S driver.
2. support TDM mode for esp2s3 & esp32c3.
2021-08-04 10:20:03 +08:00
morris
f907009056
Merge branch 'refactor/cleanup_mcpwm_examples' into 'master'
...
mcpwm: more clean up (example + LL + doc)
Closes IDF-3295
See merge request espressif/esp-idf!12798
2021-07-29 10:41:07 +00:00
Armando
3ce2d85e9e
adc: support adc2 working with WiFi
2021-07-28 17:50:14 +08:00
morris
88c87bfe56
mcpwm: update hal and soc naming
2021-07-26 22:32:45 +08:00