Commit Graph

668 Commits

Author SHA1 Message Date
Michael (XIAO Xufeng)
9c23b8e596 feature(spi_master): allow to place functions into IRAM to get higher efficiency 2018-06-14 20:22:40 +08:00
Ivan Grokhotkov
589e8db4dd Merge branch 'bugfix/spi_gpio_deinit' into 'master'
fix(spi): Fix several init/deinit issues of spi pins

See merge request idf/esp-idf!2522
2018-06-14 19:21:34 +08:00
michael
9b1f2df900 fix(sdio_slave): fix the intr_recv issue that trigger receiving too fast cause assertion failed.
also fix a race risk issue when recycle receiving buffers.
2018-06-14 12:04:23 +08:00
michael
5b37a96ddc feature(sdio): allow to enable internal pullups of the SDIO host and slave as a debug feature
NOTE: the internal pullups are not totally reliable, please do add external pullups on your bus.
2018-06-14 12:04:22 +08:00
michael
45d1c9207c bugfix(spi): resolve the glitch that happens during initialization 2018-06-14 11:29:16 +08:00
Michael (XIAO Xufeng)
77077196fd fix(spi): reset gpios that used by spi when deinited 2018-06-14 11:29:15 +08:00
Michael (XIAO Xufeng)
ebfda40b7c refactor(spi): move pin information into soc folder 2018-06-14 11:29:15 +08:00
He Yin Ling
e1a6e71486 Merge branch 'test/driver_rmt' into 'master'
test: add rmt test cases

See merge request idf/esp-idf!1797
2018-06-13 22:31:11 +08:00
He Yin Ling
a4581ff404 Merge branch 'test/driver_timer' into 'master'
test: add driver timer test cases

See merge request idf/esp-idf!1785
2018-06-13 22:28:17 +08:00
houchenyao
5c6473245f test: add driver/rmt test case 2018-06-13 18:10:09 +08:00
He Yin Ling
17200f484e Merge branch 'test/driver_sigmadelta' into 'master'
test: add sigmadelta test

See merge request idf/esp-idf!1780
2018-06-13 15:19:35 +08:00
houchenyao
de848a5150 test: driver/sigmadelta test case 2018-06-13 10:15:06 +08:00
houchenyao
0837eb4c2e test: components/driver: timer case 2018-06-13 01:39:07 +00:00
houchenyao
e5717e365f test: add driver/gpio test case 2018-06-12 19:04:30 +08:00
Mahavir Jain
eef8d0f7ed Resolve required include header dependencies in component itself
Signed-off-by: Mahavir Jain <mahavir@espressif.com>
2018-06-12 11:19:39 +05:30
Angus Gratton
87077a5478 test: Tweaks to reduce variation in CI unit tests
spi test: Prime the flash cache before each test to minimise flash cache misses.

VFS performance test: Increase the number of runs to minimise influence of an isolated bad run.
2018-06-08 14:42:44 +10:00
Michael (XIAO Xufeng)
939e5693a5 chore(spi): fix the terms of native to iomux 2018-06-06 06:08:39 +00:00
michael
75cdbcefc7 test(spi): add test for SPI timing 2018-06-06 06:08:39 +00:00
michael
208d993de1 test(spi_master): slightly modify the test 2018-06-06 06:08:39 +00:00
michael
5cf7d3768d feat(spi_master): fine tune the timing of SPI 2018-06-06 06:08:39 +00:00
Angus Gratton
6b9784cc45 Merge branch 'master' into feature/cmake_update 2018-05-31 14:46:23 +10:00
Angus Gratton
c9f8470fdf Merge branch 'feature/rmt_translator' into 'master'
driver(rmt): Add API supports sending uint8_t type data

See merge request idf/esp-idf!1975
2018-05-23 07:27:14 +08:00
Angus Gratton
75c27202f7 Merge branch 'feature/update_touchpad_filter_process' into 'master'
driver(touchpad): Change the measuring mode, improve the software filter.

See merge request idf/esp-idf!2358
2018-05-22 09:56:55 +08:00
kooho
5bc8ae3b3a driver(rmt):Add API supports sending uint8_t type data. 2018-05-22 01:55:44 +00:00
michael
f613859e29 feat(sdio_slave): add new driver for sdio_slave 2018-05-21 23:48:47 +08:00
Angus Gratton
0c64ef9600 Merge branch 'bugfix/sdio_write_unaligned_len' into 'master'
SDIO: allow read/write operations for lengths not divisible by 4

See merge request idf/esp-idf!2278
2018-05-21 15:26:32 +08:00
Wangjialin
09181b7d94 driver(touchpad): improve touchpad filter mode and update examples. 2018-05-21 14:45:31 +08:00
Jiang Jiang Jian
35d148256b Merge branch 'bugfix/fix_uart_buffer_full_flg_error_bug' into 'master'
driver(uart): Fix the bug that uart buffer_full flag is true all the time.

See merge request idf/esp-idf!2418
2018-05-21 14:09:44 +08:00
Jiang Jiang Jian
9c53b599b2 Merge branch 'bugfix/i2c_add_xqueue_static_allocation' into 'master'
driver(i2c, rmt):  Add xQueue and xSemaphore static allocation support when intr_alloc_flag set to ESP_INTR_FLAG_IRAM.

See merge request idf/esp-idf!2335
2018-05-21 10:29:31 +08:00
Angus Gratton
03414b1f39 Merge branch 'bugfix/reset_some_peripherals_when_cpu_start' into 'master'
driver:   Reset  communication peripherals when cpu start up.

See merge request idf/esp-idf!2296
2018-05-21 09:53:42 +08:00
kooho
f6f9f93a9d driver(i2c, rmt):Add intr_flag setting to ESP_INTR_FLAG_IRAM support when enable psram. 2018-05-21 09:37:56 +08:00
wangmengyang
22e21b38f7 component/bt: implement bluetooth modem sleep mode, one mode for BLE only and another for dual mode bluetooth
1. provide options for bluetooth low power mode
2. provide two options for bluetooth low power clock: main XTAL and external 32kHz XTAL
3. provide function and callbacks to control bluetooth low power mode, including enable/disable sleep, software wakeup request, low power clock settings, check power state, etc
4. modify vhci API vhci_host_send_packet to use blocking mode
5. note that DFS and bluetooth modem sleep can not be used together currently.
2018-05-19 15:37:26 +08:00
kooho
33b99caf50 driver(uart):Fix the bug that uart buffer_full flag is true all the time. 2018-05-18 16:46:10 +08:00
kooho
ef39c09bc1 driver: reset communication peripherals when the cpu starts. 2018-05-18 14:41:58 +08:00
Roland Dobai
18e83bcd53 Allow VFS file descriptors in select() 2018-05-18 08:06:33 +02:00
Jiang Jiang Jian
cf9499479c Merge branch 'bugfix/i2s_mix_result_with_error_code_master' into 'master'
fix i2s mix result and error code

See merge request idf/esp-idf!2227
2018-05-17 21:53:06 +08:00
Jiang Jiang Jian
8c657dfee4 Merge branch 'bugfix/fix_an_error_in_comment_of_uart_driver' into 'master'
deiver(uart):revise the explanation of uart break length

See merge request idf/esp-idf!2398
2018-05-17 17:17:14 +08:00
Jiang Jiang Jian
993b8b7bf6 Merge branch 'bugfix/o3_fails' into 'master'
Fix compilation errors when -O3 is used

See merge request idf/esp-idf!2396
2018-05-17 16:48:13 +08:00
Zhang Zhao Xiang
9deb58859c fix i2s mix result and error code 2018-05-17 10:59:04 +08:00
Angus Gratton
b2e264ef52 Merge branch 'feature/ledc_add_api_set_hpoint_val' into 'master'
driver(ledc): fix duty and fade issues and add thread-safe version APIs.

See merge request idf/esp-idf!2233
2018-05-16 19:52:26 +08:00
Jiang Jiang Jian
4b4a587540 Merge branch 'bugfix/touch_change_default_enable_value' into 'master'
bugfix(touch): change the default value for sar_touch_enable register.

See merge request idf/esp-idf!1870
2018-05-16 17:40:18 +08:00
Angus Gratton
fcd5d0869d Merge branch 'bugfix/spi_native_pins' into 'master'
fix several spi issues about pin configurations

See merge request idf/esp-idf!2309
2018-05-15 14:19:20 +08:00
Angus Gratton
31d53bc059 Merge branch 'bugfix/sdspi_delayed_write_response' into 'master'
sdspi: handle delayed response to data write command

See merge request idf/esp-idf!2290
2018-05-15 10:32:21 +08:00
Jiang Jiang Jian
73d20981de Merge branch 'bugfix/rmt_tx_stop_bug' into 'master'
driver(rmt):  RMT tx stop  workaround

See merge request idf/esp-idf!1915
2018-05-15 10:04:33 +08:00
Jiang Jiang Jian
33b11c6f6a Merge branch 'feature/adjust_log_level_about_uart' into 'master'
feat: Adjust log level about UART

See merge request idf/esp-idf!2047
2018-05-15 09:59:21 +08:00
Ivan Grokhotkov
9379d7b9f9 sdmmc: wait for command done event even if data transfer is over
This fixes errors logged on the console: sdmmc_req:
handle_idle_state_events unhandled: 00000004 00000000

The issue happens if "data done" event occurs before "command done".
State machine code did not check *which* event occurred in
SENDING_CMD state, and went to IDLE or SENDING_DATA state on any
non-error event. In this case, we can't process "data done" event
until command has completed. This change introduces "unhandled event"
mask, which is carried over from one run of process_events to the
other. This allows waiting for the "command done" event to complete,
and then process "data done" event.

Ref TW17126.
2018-05-15 09:59:20 +08:00
Ivan Grokhotkov
cf81db40a2 sdio: allow reads/writes with lengths not divisible by 4
CMD53 in byte mode supports transfers of any number of bytes between 1
and 512. This change removes limitation that the number of bytes must
be divisible by 4. Host quirk, that such transfers must be split into
two commands (one for the aligned part and the other one for
unaligned) is taken into account.
2018-05-15 09:59:20 +08:00
chenjianqiang
b5de860bcb revise the explain of a parameter(brk_len) in uart driver file 2018-05-14 19:47:16 +08:00
kooho
a8d26d7e4d driver(rmt):Fix rmt_tx_stop bug. 2018-05-14 19:46:30 +08:00
Roland Dobai
ca08397b6b Fix compilation errors when -O3 is used
Closes https://github.com/espressif/esp-idf/issues/718
2018-05-14 12:29:57 +02:00
jack
c384fa2492 rename clock enable and reset bits for SPI modules
1.The names of clock enable and reset bits do not match with TRM, just rename them.
2018-05-14 16:45:03 +08:00
kooho
1bebec05c6 driver(ledc): fix duty and fade issues and add thread-safe version APIs.
1. Fix the duty fade check issue reported from https://github.com/espressif/esp-idf/issues/1914
2. Fix the duty overflow issue when duty_scale is set to 1.
3. Fix the duty fade error when a fade operation is under way. We must configure a new duty setting after the previous fade operation has finished due to hardware limit.
4. Add thread-safe version APIs to set duty and fade.
5. Correct the duty range in driver.
2018-05-14 12:27:21 +08:00
Angus Gratton
e23ee9fa73 Merge branch 'bugfix/ledc_error' into 'master'
ledc driver: Clarify logging of function argument errors

See merge request idf/esp-idf!2380
2018-05-14 09:16:02 +08:00
Angus Gratton
64c52022b9 Merge branch 'bugfix/add_comments_for_adc' into 'master'
driver(adc): Add descriptions that starting ADC can trigger interrupt of GPIO36…

See merge request idf/esp-idf!1910
2018-05-11 18:54:40 +08:00
kooho
d53661a663 driver(adc): add descriptions for the issue that starting ADC can trigger interrupt of GPIO36 and GPIO39. 2018-05-11 17:08:58 +08:00
Mahavir Jain
b2a1a79eb4 i2s: fix issue in dma descriptor allocation if SPIRAM is enabled
It has been observed that, if external SPIRAM is enabled, then under
certain scenarios (e.g. internal memory being too much fragmented),
I2S tx/rx descriptors can land in external SPIRAM and hence resulting
in failure in DMA. Adding explicit capability to allocate in only DMA
capable memory.

Signed-off-by: Mahavir Jain <mahavir@espressif.com>
2018-05-10 18:26:01 +05:30
Angus Gratton
feb64c3be6 ledc driver: Clarify logging of function argument errors
Some parameter errors did not specify which parameter was invalid.

Adds a new macro to name the invalid param.
2018-05-10 17:21:35 +08:00
Ivan Grokhotkov
a2556229aa Merge branch 'bugfix/uart_fix_get_baudrate_error_bug' into 'master'
driver(uart):   Fix uart_get_baudrate incorrect return value when using ref_tick

See merge request idf/esp-idf!2295
2018-05-08 20:25:13 +08:00
michael
197f594b06 fix(spi): fix the issue when bus flag not set, dual mode cannot be used. 2018-05-08 15:47:26 +08:00
michael
28beafc624 fix(spi): fix the issue that native pins don't work after SPI initialized before 2018-05-08 15:47:25 +08:00
Michael (XIAO Xufeng)
1f085b1a3b feat(gpio): add function allowing switching input source from GPIO back to IOMUX 2018-05-08 15:47:25 +08:00
Angus Gratton
b90ad81f22 driver: Add notes to SPI driver docs about thread safety 2018-05-07 09:03:48 +08:00
kooho
0dca2d4c68 driver(uart): Fix uart_get_baudrate incorrect return value when using ref_tick 2018-05-04 09:41:41 +08:00
Angus Gratton
1cb5712463 cmake: Add component dependency support
Components should set the COMPONENT_REQUIRES & COMPONENT_PRIVATE_REQUIRES variables to define their
requirements.
2018-04-30 09:59:20 +10:00
Angus Gratton
4f1a856dbf cmake: Remove defaults for COMPONENT_SRCDIRS, COMPONENT_SRCS, COMPONENT_ADD_INCLUDEDIRS
* Philosophical: "explicit is better than implicit".
* Practical: Allows useful errors if invalid directories given in components as the defaults aren't
  always used. Also trims the -I path from a number of components that have no actual include
  directory.
* Simplifies knowing which components will be header-only and which won't
2018-04-30 09:59:20 +10:00
Angus Gratton
c671a0c3eb build system: Initial cmake support, work in progress 2018-04-30 09:59:20 +10:00
Liu Zhi Fu
ed46976f41 esp32/bt/driver: support static allocation of FreeRTOS queues used by ISR routine
Support static allocation of FreeRTOS queues used by ISR routine in WiFi/BT/esp_timer/driver etc
2018-04-27 15:02:30 +08:00
Ivan Grokhotkov
2699bb49ae sdspi: handle delayed responses for data write commands
Command response tokens can be delayed from the original command by 1
to 8 bytes. In 4a2489b9, handling for delayed tokens was added for
normal (no data) commands, and data read commands. This adds handling
for delayed commands for data write commands.
2018-04-26 10:04:44 +08:00
Ivan Grokhotkov
52f9a5ca16 Merge branch 'bugfix/sdspi_wp_cd_pins' into 'master'
sdmmc, sdspi: fix handling of CD and WP

See merge request idf/esp-idf!2285
2018-04-24 20:53:47 +08:00
Ivan Grokhotkov
85ab4fc83e sdmmc host: add handling of CD and WP pins
Previous version of the code only connected CD and WP to the
peripheral, in fact the hardware does not use the values of these
signals automatically. This adds code to read CD and WP values when
command is executed and return errors if card is not present, or
write command is executed when WP signal is active.
2018-04-24 19:08:44 +08:00
Ivan Grokhotkov
829c6cef39 sdmmc host: when parameter validation fails, exit cleanly
This fixes lock-up which happened when sending a command, if the
previous command has failed.
2018-04-24 19:08:44 +08:00
Ivan Grokhotkov
92a16ac6e6 sdspi: fix CD and WP incorrectly configured as outputs 2018-04-23 14:35:40 +08:00
Ivan Grokhotkov
2a7d85cfa4 sdmmc, sdspi: fix initializers to be C++-compatible, add test
Closes https://github.com/espressif/esp-idf/issues/1861
Closes https://github.com/espressif/arduino-esp32/issues/1312
2018-04-23 14:35:13 +08:00
Flavio Bayer
d477d3c5bd bugfix/sdspi_host.c: wrong CD/WP pin configuration
Looks like the configuration of CP and WP pins are wrong, since the check for `gpio_cd` and `gpio_wp` in `slot_config` seems to be swapped.
2018-04-23 11:32:42 +10:00
Ivan Grokhotkov
22fbcd276c Merge branch 'feature/amazon_freertos_compat_v2' into 'master'
Changes for Amazon Freertos compatibility

See merge request idf/esp-idf!2123
2018-04-20 14:55:47 +08:00
Ivan Grokhotkov
6185e722c3 Revert "Merge branch 'feature/vfs_select' into 'master'"
This reverts merge request !2074
2018-04-20 11:51:41 +08:00
Mahavir Jain
43a12894ea driver/spi: add _ISR counterparts if invoked from interrupt for critical section
Signed-off-by: Mahavir Jain <mahavir@espressif.com>
2018-04-19 18:28:55 +05:30
Ivan Grokhotkov
88d0d6ffb0 Merge branch 'feature/vfs_select' into 'master'
Allow VFS file descriptors in select()

See merge request idf/esp-idf!2074
2018-04-19 15:06:02 +08:00
Ivan Grokhotkov
b297b72abb Merge branch 'bugfix/fix_gpio_install_isr_service_check_value' into 'master'
driver(gpio): modify return value when gpio ISR service already exists.

See merge request idf/esp-idf!2125
2018-04-19 15:01:50 +08:00
Roland Dobai
6852d653bd Allow VFS file descriptors in select() 2018-04-17 11:25:30 +02:00
Mahavir Jain
959c677025 rtc_module: fix build failure if assertions are disabled
Closes https://github.com/espressif/esp-idf/issues/1841

Signed-off-by: Mahavir Jain <mahavir@espressif.com>
2018-04-17 10:44:48 +05:30
Ivan Grokhotkov
d3fd00c049 Merge branch 'bugfix/spi_miso_on_input_only_pins' into 'master'
fix(spi): allow to use MISO on GPIO34-39.

See merge request idf/esp-idf!2136
2018-04-16 14:39:02 +08:00
Angus Gratton
8b3fda99f5 Merge branch 'feature/uart_add_api_get_cmd_position' into 'master'
driver(uart): Add API to get the position of cmd_char

See merge request idf/esp-idf!2177
2018-04-16 08:03:25 +08:00
Wang Jia Lin
6c44fc70bc Merge branch 'feature/gpio_add_hold_support' into 'master'
driver(gpio):   Add api support digital pad hold function

See merge request idf/esp-idf!2186
2018-04-13 12:18:44 +08:00
Michael (Xiao Xufeng)
45f8bcf3f8 fix(spi): allow using MISO on GPIO34-39
Breaking Changes: arguments of ``spicommon_bus_initialize_io`` are changed.

Closes https://github.com/espressif/esp-idf/issues/1736.
2018-04-12 17:01:38 +08:00
Michael (Xiao Xufeng)
77629129c0 chore(spi): update the return value of spi init functions 2018-04-12 17:01:38 +08:00
Michael (Xiao Xufeng)
dceb3452c7 doc(spi_master): format the documentation of several fields and macros in spi_master.h 2018-04-12 17:01:37 +08:00
kooho
2236249555 driver(pcnt): Add some APIs to support each unit can have it's own interrupt handler. 2018-04-11 16:15:09 +08:00
Ivan Grokhotkov
c6829fa5b8 sdmmc: improve error handling during SPI mode init
- In SPI mode, the card will respond to the initial SDIO reset (done
using CMD52) with “invalid command” error. Handle this correctly.

- sdmmc_card_init had a hack where GO_IDLE_STATE (CMD0) command was
sent twice. Add explanation why this is done, and don’t expect
correct response from the card on first CMD0.

- improve logs printed at debug level by adding CMD index
2018-04-11 11:11:17 +08:00
Ivan Grokhotkov
ee600784c5 sdmmc: add SDIO support
- Add SDIO support at protocol layer (probing, data transfer, interrupts)
- Add SDIO interrupts support in SDMMC host
- Add test (communicate with ESP32 in SDIO download mode)
2018-04-11 11:07:13 +08:00
Ivan Grokhotkov
5f97e6bebb sdmmc: fill as many DMA descriptors as possible 2018-04-11 11:06:50 +08:00
Ivan Grokhotkov
20a8c3318a sdmmc: do expect CMD_DONE interrupt after response timeout
Existing code assumed that response timeout is not followed by CMD_DONE,
which was not true, in fact. Host datasheet states that CMD_DONE is sent
after an RTO.
2018-04-11 11:06:50 +08:00
Ivan Grokhotkov
01cd2fce73 sdmmc: print error status only once 2018-04-11 11:06:50 +08:00
Ivan Grokhotkov
5fc6fb58ea sdmmc: don't whitelist the opcodes when handling response timeout
All the commands which do not have a response must have their flags set
accordingly. Therefore the host will not send RTO interrupt if response
is not expected. It is a bug in the code logic if it happens otherwise.
2018-04-11 11:06:50 +08:00
Ivan Grokhotkov
f02cff13cc sdmmc: set highest possible host clock divider
SDMMC host suffers from an issue that it outputs data near the rising
edge of the card clock, which is the edge used by the card to sample
data. If sampling time constraint is not satisfied, card may read data
after the transition.

The phases of output/input data can, in fact, be adjusted. However this
adjustment happens in the clock generation block outside of the host.
So the maximum phase change which can be created this way is equal to
half of the host clock period. So if the host clock is set to the lowest
possible frequency (for the given card frequency), then the phase offset
(and hence the hold time) will be the highest. This change modifies the
logic used to determine clock dividers accordingly.

sdmmc host: set correct dout phase and print correct frequency
2018-04-11 11:06:50 +08:00
Ivan Grokhotkov
84d6793f77 sdmmc: don't set data_expected on SET_BUS_WIDTH command
SET_BUS_WIDTH is not a data transfer command. Extensive search in the
host datasheet and SD card spec did not reveal the origin of this hack
or 'feature'. Further testing showed that removing this does not lead to
regressions.
2018-04-11 11:06:50 +08:00
Ivan Grokhotkov
42de5fb76d sdmmc: send init sequence before CMD0 2018-04-11 11:06:50 +08:00
kooho
ccf09c3b39 driver(gpio): Add api support digital pad hold function. 2018-04-10 11:31:59 +08:00
Ing. Jaroslav Šafka
3d89c8ba74 rmt: Fix LoadProhibited on RX END
Fixes exceptions LoadProhibited, when rmt tries read variable p_rmt on RX END which can be 0.
It happens after esp_reset()  (OTA) and the rmt is not probably stopped by it.
In other words the routine rmt_driver_isr_default was called before second rx channel was registered.

scenario:
register tx channel
register rx channel
reboot
register tx channel
-> exception (because rx channel is accessed)

Merges https://github.com/espressif/esp-idf/pull/1671
2018-04-09 12:29:05 +10:00
Angus Gratton
53234ef2bc Merge branch 'refactor/rtc_split_module' into 'master'
bugfix(rtc): make sure peripherals (DAC, HALL) are turned off before conversion.

See merge request idf/esp-idf!1848
2018-04-04 09:00:58 +08:00
kooho
305c788c60 driver(uart): Add API to get the position of cmd_char 2018-04-03 12:34:16 +08:00
Ivan Grokhotkov
4a2489b99a sdspi: fix compatibility issue in multi block read
SDSPI driver optimized polling of the response tokens by requesting
two extra bytes on top of the block size (512) and CRC (2), and
checking whether these bytes contained the data response token or
not. In case the token was there, further polling would not need to
happen, thereby reducing latency between two consecutive blocks
transferred. However this caused compatibility issues when these two
extra bytes were sent after reading the final block. When
STOP_TRANSMISSION command was sent, these extra two bytes were
treated as part of the command, causing an invalid command error.

This fixes the logic by only requesting extra two bytes if the block
being read is not the final block. In addition to that, more strict
error checking is implemented for command response tokens.
2018-03-30 18:49:42 +08:00
Ivan Grokhotkov
229f67b816 sdspi: handle delayed R1 responses for data read commands 2018-03-30 18:49:42 +08:00
Ivan Grokhotkov
bbbdec24d9 sdspi: handle error flags for R3/R7 responses
Previously error flags were only handled for R1 responses. This change
moves error handling into a separate function and calls it for R1/R3/R7.
2018-03-30 18:49:42 +08:00
Jiang Jiang Jian
8b9f237cb9 Merge branch 'feature/i2s_add_expand_function' into 'master'
add a new i2s feature to expand the original i2s width

See merge request idf/esp-idf!1617
2018-03-30 14:51:23 +08:00
kooho
8e1f930582 driver(gpio): Modified the GPIO_CHECK's return value when ISR service already installed 2018-03-29 09:58:31 +08:00
Ivan Grokhotkov
1a157279e0 Merge branch 'doc/adc1_channel_config' into 'master'
adc: Add doc details about configure not needed before each read

See merge request idf/esp-idf!2132
2018-03-28 19:11:44 +08:00
Michael (Xiao Xufeng)
cef8baf424 bugfix(rtc): make sure peripherals (DAC, HALL) are turned off before conversion.
refactor structure of ``rtc_module.c`` to make it more clearly.

Closes https://github.com/espressif/esp-idf/issues/1517
2018-03-28 17:10:01 +08:00
Angus Gratton
4507b3fde6 adc: Add doc details about configure not needed before each read 2018-03-28 11:52:41 +11:00
Ivan Grokhotkov
2935e958fc Merge branch 'bugfix/adc2_cct' into 'master'
fix(adc2): fix cct and xpd configurations to improve precision of ADCs

See merge request idf/esp-idf!2020
2018-03-27 16:23:43 +08:00
Ivan Grokhotkov
892f3907fa Merge branch 'bugfix/i2c_ack_error_bug' into 'master'
driver(i2c):  Fixed i2c interrupt wdt timeout bug

See merge request idf/esp-idf!2049
2018-03-27 12:29:23 +08:00
Michael (Xiao Xufeng)
7563510758 feat(spi_master): allow output high speed data when dummy bits are not used. 2018-03-26 21:24:32 +08:00
michael
28e832c37e fix(adc2): fix cct and xpd configurations to improve precision of ADCs 2018-03-26 12:02:26 +00:00
kooho
37db055cff driver(i2c): Fixed ack_err interrupt can't exit bug. 2018-03-26 16:31:17 +08:00
Zhang Zhao Xiang
f48ecb8613 Add a new i2s feature to expand the original i2s width 2018-03-22 18:52:55 +08:00
Ivan Grokhotkov
7e2028d598 Merge branch 'bugfix/gpio_timer_doc_fixes' into 'master'
Minor fixes of GPIO and timer group driver docs

See merge request idf/esp-idf!2081
2018-03-20 10:49:36 +08:00
Ivan Grokhotkov
b9a8912659 Merge branch 'bugfix/spi_master_const_dev_config_t' into 'master'
spi master: use constant dev_config parameter in spi_bus_add_device

See merge request idf/esp-idf!2082
2018-03-19 16:31:19 +08:00
Jonathan Kaufmann
a99d4d5a7f Modified spi_bus_add_device so that it takes a constant *dev_config parameter.
Merges https://github.com/espressif/esp-idf/pull/1690
2018-03-19 12:17:45 +08:00
Stefan Tauner
38daa1e716 docs: fix description of timer_get_alarm_value()
Replace c&p text with an actual description.

Merges https://github.com/espressif/esp-idf/pull/1740
2018-03-19 11:56:57 +08:00
Stefan Tauner
86a1d579ff docs: add warning to gpio_get_level()
On most microcontrollers I have worked with one can retrieve the
current state of output GPIO pins. On ESP32 this is not the case
if the pad is not explictly configured to route this information into
the port by configuring it as input or i/o.
Thus add a warning to the API documentation of gpio_get_level().

Merges https://github.com/espressif/esp-idf/pull/1740
2018-03-19 11:56:57 +08:00
Michael (Xiao Xufeng)
15be0829fa test(spi_master): test spi master speed performance by median value.
also increase the boundary of SPI limit by a little.
2018-03-16 16:37:19 +08:00
Xu Chun Guang
973913b151 feat: Adjust log level about UART
There are too many log when UART baud is around 2Mbps if not use hard flow control.
2018-03-13 16:01:37 +08:00
Ivan Grokhotkov
c8ba6cf156 Merge branch 'feature/rtc_gpio_isolate' into 'master'
Add rtc_gpio_isolate function, use it in deep sleep examples

See merge request idf/esp-idf!1936
2018-02-26 06:09:08 +08:00
Angus Gratton
63ddae5087 Merge branch 'bugfix/i2s_driver' into 'master'
i2s: add support fixed_mclk configuration

See merge request idf/esp-idf!1600
2018-02-22 12:03:26 +08:00
Tuan PM
7cda34c626 i2s: add support fixed_mclk configuration 2018-02-22 09:00:23 +07:00
h3ndrik
dcc466a673 i2s: fix type mismatch of intr_alloc_flags
Merges https://github.com/espressif/esp-idf/pull/1589
2018-02-16 16:20:12 +11:00
Ivan Grokhotkov
363c096f2b Merge branch 'test/adc2_with_wifi_reopen' into 'master'
test(adc2): re-enable the adc2 test.

See merge request idf/esp-idf!1926
2018-02-11 22:32:18 +08:00
Ivan Grokhotkov
f45622ff17 driver/rtc: add rtc_gpio_isolate helper function to disconnect RTC IO 2018-02-11 13:18:51 +08:00
Ivan Grokhotkov
e381c6adde Merge branch 'bugfix/fix_i2s_adc_mode' into 'master'
driver(i2s): fix broken i2s adc mode

See merge request idf/esp-idf!1653
2018-02-11 12:58:58 +08:00
Ivan Grokhotkov
62f924544d Merge branch 'test/spi_performance' into 'master'
test(spi_master): add performance display for spi master.

See merge request idf/esp-idf!1923
2018-02-08 22:59:40 +08:00
michael
687d6aa2cd test(adc2): re-enable the adc2 test. 2018-02-08 13:48:25 +08:00
Jeroen Domburg
35de8d703e Merge branch 'bugfix/spi_gpio0' into 'master'
fix(spi): several fixes about maros (flags) and GPIO0.

See merge request idf/esp-idf!1666
2018-02-07 18:50:13 +08:00
Michael (Xiao Xufeng)
a151767426 test(spi_master): add performance display for spi master. 2018-02-07 17:50:13 +08:00
Wangjialin
451f69cc2e driver(i2s): fix broken i2s adc mode
1. Move i2s reset code from i2s_stop to i2s_start.
2. add RTC API to set sw mode for ADC
3. add description for adc_power_always_on()
4. add lock for i2s dma and RTC ADC functions.
5. add ADC read task in example

reported from bbs:  https://esp32.com/viewtopic.php?f=13&t=3490&p=17522#p17522
reported from github: https://github.com/espressif/esp-idf/issues/1333
2018-02-07 17:17:20 +08:00
Michael (XIAO Xufeng)
e14e1508cb fix(sdmmc_host): fix the issue when slot and host flag are not compatible. 2018-02-07 12:05:05 +08:00
Michael (XIAO Xufeng)
8abbb17401 feat(sdmmc_host): force pull-up DAT3 for SD 4-bit mode so that slave will not fall into SPI mode. 2018-02-07 12:05:05 +08:00
Michael (Xiao Xufeng)
5214a0600c test(adc2): temporary ignore adc2 unit test (with WiFi) to pass the CI.
the issue is introduced in commit 17f01eb718.
2018-02-06 11:59:40 +08:00
Angus Gratton
4297c337f9 esp32: Add IO_MUX_GPIOxx register names to match iomux names used in TRM
The TRM describes IOMUX registers are IO_MUX_x_REG for x in GPIO0-39.

Until now ESP-IDF describes them as PERIPHS_IO_MUX_(pinname)_U

This commit adds additional IOMUX register names which match the ones used in the TRM.
2018-01-30 17:09:37 +08:00
michael
be96e1db95 fix(spi): fix typo of LSBFIRST macro.
Closes https://github.com/espressif/esp-idf/issues/1480, Closes https://github.com/espressif/esp-idf/issues/1464
2018-01-29 17:44:37 +08:00
michael
8900200147 fix(spi_master): fix the variable command and address flag issue.
Closes https://github.com/espressif/esp-idf/issues/1549
2018-01-29 17:44:36 +08:00
michael
60469c500a fix(spi): fix pin issue with GPIO0 (other pins than CS). 2018-01-29 17:44:36 +08:00
Wangjialin
3da8f2eda1 bugfix(touch): change the default value for sar_touch_enable register.
Reported from github: https://github.com/espressif/esp-idf/issues/1236

All the touch channels are enabled by default in hardware. This would interfere other RTC function on Touch IOs.
Disable touch function in touch_pad_init().
2018-01-29 15:40:21 +08:00
Wangjialin
870efdb9d4 bugfix(uart): patten detect function
requirement from github(https://github.com/espressif/esp-idf/issues/805): to provide the position in the buffer of the pattern detected.

requirement from AT application: in AT app, when no hardware flow control is enabled, in some situation the rx buffer might be full, and the terminator “+++” might be lost, we can use pattern detect interrupt to avoid missing the terminator. When pattern detect interrupt happens, it will not send a data event at the same time.

1. Add API to get position of detected pattern in rx buffer
2. Modify UART event example
3. Add comments for uart_flush, add alias API uart_flush_input to clear the rx buffer
4. Modify the way rx_buffered_len is calculated
2018-01-22 13:33:51 +08:00
kooho
492db0591d Fix uart fifo overflow bug 2018-01-12 14:42:54 +08:00
Angus Gratton
2227c44254 rmt: Add void * argument for end-of-transmission callback
Ref https://github.com/espressif/esp-idf/pull/1174
2018-01-05 17:31:59 +11:00
Krzysztof Bociurko
1066c74b74 rmt: Adds a simple handler that can be called when transmission ends.
Merges https://github.com/espressif/esp-idf/pull/1174
2018-01-05 17:14:02 +11:00
Ivan Grokhotkov
30aacb79d5 Merge branch 'bugfix/uart_semaphore_pr1387' into 'master'
uart driver: Remove unnecessary xSemaphoreGive()

See merge request !1739
2018-01-05 11:05:05 +08:00
Angus Gratton
6e23ee704b Merge branch 'refactor/spi_clk_pre_cal' into 'master'
bugfix(spi_master): improve spi time cost for each transfer.

See merge request !1670
2018-01-04 06:03:12 +08:00
Alexey Morozov
25b8642835 uart driver: Remove unnecessary xSemaphoreGive()
avoid unnecessary call of xSemaphoreGive(p_uart_obj[uart_num]->tx_mux);

Merges https://github.com/espressif/esp-idf/pull/1387
2018-01-03 13:44:19 +11:00
Per Malmberg
f7f52414ec Removed logging in RMT driver which skews the timing. Issue #1345
Merges https://github.com/espressif/esp-idf/pull/1450
2018-01-03 10:50:03 +11:00
Per Malmberg
5fb16d9b2b Fix regression in i2c_master_read() which rejected all data lenths. 2017-12-28 14:54:15 +01:00
michael
2552fdccd1 chore(spi): add log to show native pins or not when configure pins. 2017-12-28 12:03:29 +08:00
michael
f4be6ac84d fix(spi_master): fix the logic in the ISR to prevent re-config registers when device is not changed. 2017-12-28 12:03:29 +08:00
michael
7a7b8fc182 refactor(spi_master): move the clock calculation from ISR to initialization. 2017-12-28 12:03:28 +08:00
Angus Gratton
ec7cac5fe8 Merge branch 'feature/docs_update_rmt_api' into 'master'
RMT API docs update, new example

See merge request !1564
2017-12-27 09:23:47 +08:00
kooho
d78be97154 add NACK for the last byte to read 2017-12-26 21:50:18 +08:00
Angus Gratton
661d584ae7 Merge branch 'bugfix/i2c_fixes_pr1180' into 'master'
i2c: rx <-> tx typo's, NULLing free'd variable, consistent CRITICAL sects

See merge request !1551
2017-12-18 06:44:33 +08:00
Angus Gratton
8f874aaa0f Merge branch 'bugfix/i2c_use_queue_instead_of_eventbit' into 'master'
bugfix(i2c): use queue instead of event group for internal commands

See merge request !1616
2017-12-15 13:54:03 +08:00
Chuck Todd
d913fff6d7 i2c: rx <-> tx typo's, NULLing free'd variable, consistent CRITICAL sects
A couple of typos referencing tx_ring_buf when rx_ring_buf, slv_tx_mux
instead of slv_rx_mux.

Also, I2C_ENTER_CRITICAL()/I2C_EXIT_CRITICAL() usage was not consistent.
Only some of the _set_ functions had them.  Most of the _get_ function
had them?  It is my understanding that they should be wrapped around
writes, not reads? (I think we still need the lock for reading pairs of consistent values)

Also, the ticks_to_wait timeout handling in i2c_master_cmd_begin() would
not handle integer rollover correctly.

Merges https://github.com/espressif/esp-idf/pull/1180
2017-12-11 11:08:39 +08:00
Ivan Grokhotkov
269486ca4d sdspi: use response timeout passed from upper layer
Previously SDSPI host driver would rely on retry count when waiting for
the card to read or write data. This caused different timeout times
depending on CPU frequency and card clock frequency. In practice, card
performance does not depend on these two factors.
This change uses timeout_ms field of sdmmc_command_t introduced
previously for SDMMC host.

Fixes https://esp32.com/viewtopic.php?f=2&t=3440&p=16037 and similar
issues related to SDSPI timeouts.
2017-12-11 11:07:08 +08:00
Fabiano Kovalski
9075b507b5 driver(i2c): corrected timeout range for i2c_set_timeout.
Merges https://github.com/espressif/esp-idf/pull/1353
2017-12-08 14:26:35 +08:00
krzychb
421592a8eb LEDC Driver: Added back original definitions of 'duty_resolution' and 'clock_divider'. This update is to provide backward compatibility with ESP-IDF 2.1. 2017-12-04 21:12:56 +01:00
Jiang Jiang Jian
c672fc54fd Merge branch 'feature/ledc_more_meaningful_parameter_names' into 'master'
Provided more meaningful parameter names by renaming 'bit_num' to 'duty_resoluti…

See merge request !1440
2017-12-01 19:33:53 +08:00
krzychb
866b84b9f8 Typo fix. Closes https://github.com/espressif/esp-idf/issue/1323 2017-12-01 09:06:08 +01:00
Wangjialin
bf3c41bb92 bugfix(i2c): use queue instead of event group for internal commands
Reported from github:
https://github.com/espressif/esp-idf/issues/1312
https://github.com/espressif/esp-idf/issues/1193

Issues:
1. We used to use event group in the driver, which would cause:
    a. longer operation time since the event group are based on FreeRTOS timer.
    b. Operation fails if the timer queue is not long enough.
2. There might be some issue with event group, we will still try to provide a small test code in other branch.

modification:
1. use queue instead of event-bit for internal commands
2. use queue overwrite for cmd_done event
2017-11-29 12:33:11 +08:00
Angus Gratton
5e7478a055 Merge branch 'bugfix/ledc_fade_scale' into 'master'
driver(LEDC): add scale value check in ledc_set_fade API

See merge request !1583
2017-11-27 07:23:19 +08:00
panfeng
b553c925b1 bugfix: while scale equals 0 will cause crash 2017-11-23 17:56:18 +08:00
kooho
ada33fe3dd Add GPIO input and output disable option 2017-11-22 15:00:27 +08:00
krzychb
2ec35f60ca RMT API docs update, new example 2017-11-21 22:34:23 +01:00
Ivan Grokhotkov
4b8f55aadf Merge branch 'bugfix/minor_fixes_github' into 'master'
Minor fixes from github

See merge request !1555
2017-11-20 15:58:34 +08:00
Angus Gratton
f54e99008d spi: Add ESP_ERR_NO_MEM to spi_device_queue_trans() documentation
Ref https://github.com/espressif/esp-idf/pull/1243#issuecomment-343103414
2017-11-20 16:06:59 +11:00
michael
02573a8dc9 fix(spi_master): release temporary memory when queue new trans timeout. 2017-11-17 12:15:19 +08:00
michael
13d38f10ee test(spi): internal connection test master with slave for address and command field. 2017-11-17 12:15:19 +08:00
michael
57e1d47ad7 fix(spi_master): fix the CS pin issue with GPIO 0.
Closes #909
2017-11-17 12:15:19 +08:00
michael
842292523f fix(spi_slave): add interrupt free into bus free process. 2017-11-17 12:14:40 +08:00
Raphael Luba
31711b5ac7 SPI: Document TIMEOUT return values
`spi_device_queue_trans` and `spi_device_get_trans_result` can return `ESP_ERR_TIMEOUT` – but this had not been documented.

Merges https://github.com/espressif/esp-idf/pull/1243
2017-11-17 10:50:54 +11:00
krzychb
d488bb7bac Provided more meaningful parameter names by renaming 'bit_num' to 'duty_resolution' and 'div_num' to 'clock_divider' 2017-11-15 08:08:12 +01:00
Ivan Grokhotkov
da141a2c7e Merge branch 'bugfix/touch_pad_register_mismatch' into 'master'
Bugfix/touch pad register mismatch

See merge request !1469
2017-11-15 14:52:13 +08:00
Wangjialin
7200b2cc11 bugfix(touch): registers of touchpad 8 and 9 are mismatched
1. All the registers of touch sensor 8 and 9 are mismatched except the ‘dac’ field in touch register of RTC IO
2. To swap the index for sensor 8 and 9 in APIs.
2017-11-14 18:47:56 +08:00
Ivan Grokhotkov
09d2791cfd Merge branch 'feature/spi_variable_len' into 'master'
feat(spi_master): add new feature allow use variable command and address field length for the same device.

See merge request !1322
2017-11-14 00:08:50 +08:00
Ivan Grokhotkov
5404252e80 Merge branch 'bugfix/uart_fifo_bug_workaround' into 'master'
bugfix(uart): workaround for uart fifo reset issue

See merge request !1499
2017-11-13 17:46:42 +08:00
Wangjialin
4052803e16 bugfix(uart): workaround for uart fifo reset issue
Reported from github:
https://github.com/espressif/esp-idf/issues/1219
https://github.com/espressif/esp-idf/issues/1202

After providing a simple code to digital team, they confirmed that this is a hardware bug.

Root cause:
The fifo reset signal is incorrectly connected
If we want to reset tx fifo of UART2, we have to set txfifo_rst bit of both UART1 and UART2
If we want to reset rx fifo of UART2, we have to set rxfifo_rst bit of both UART1 and UART2

Workaround:
we don't use fifo rst bit in driver.

Documentation:
Digital team would update TRM and give more explanation about this issue.
2017-11-13 15:23:00 +08:00
Anton Maklakov
27c1fc52ba Added .command_timeout_ms = 0 to SDSPI_HOST_DEFAULT() too 2017-11-08 12:52:50 +08:00
Philip Ashmore
d72bef02e9 Added .command_timeout_ms = 0 to SDMMC_HOST_DEFAULT() in components/driver/include/driver/sdmmc_host.h 2017-11-03 17:15:44 +08:00
XiaXiaotian
42cefc173f refractor WiFi clock setting
Do not set WiFi clock in PHY initializing function, move it to WiFi
   start/stop function.
2017-11-02 15:24:21 +08:00
wangmengyang
bd6394db92 component/bt: clean up WIFI_CLK_EN_REG settings for Bluetooth
1. move settings of WIFI_CLK_EN_REG for bluetooth into controller init/deinit APIs
2. modify the bit mask used in phy_rf init/deinit to use WIFI-BT shared bits
2017-11-02 15:24:21 +08:00
michael
0330ec270a feat(spi_master): add new feature allow use variable command and address field length for the same device.
Closes #654
2017-10-30 19:33:41 +08:00
Angus Gratton
7c9b24b407 Merge branch 'bugfix/fix_uart_vfs_test_error' into 'master'
bugfix(uart): Don't disable console uart peripheral

See merge request !1456
2017-10-27 19:20:13 +08:00
Wangjialin
102eb96c8b bugfix(uart): Don't disable console UART peripheral 2017-10-27 16:46:10 +08:00
Angus Gratton
ffeecde9e2 Merge branch 'feature/docs_update_timer_api' into 'master'
Timer API docs update, refactored example

See merge request !1316
2017-10-27 13:31:18 +08:00
krzychb
9b7d5d76a7 Timer API docs update, refactored example 2017-10-27 07:13:59 +02:00
Angus Gratton
f5b3a370cd Merge branch 'feature/adc2_driver' into 'master'
feature(adc2): add support to use ADC2 when WIFI is disabled

See merge request !1237
2017-10-26 15:48:48 +08:00
michael
87f2b27dc4 refactor(rtc): re-organize code in rtc_module.c 2017-10-26 14:35:30 +08:00
michael
d30f3e7aa8 example(adc2): add example and test case for adc2.
closes #461
2017-10-26 14:35:30 +08:00
esp32de
7c0020bfd0 feat(adc2): append adc2 support and api and the lock with WIFI module
append adc support and api
- esp_err_t adc2_config_width(adc_bits_width_t width_bit);
- esp_err_t adc2_config_channel_atten(adc2_channel_t channel, adc_atten_t atten);
- int adc2_get_voltage(adc2_channel_t channel);
2017-10-26 14:35:29 +08:00
Wangjialin
303b9f60db bugfix(uart): set default tx idle num
Reported from:
https://github.com/espressif/esp-idf/issues/703
https://github.com/espressif/esp-idf/issues/917
In uart driver we didn't change the default value of tx idle num, so there would be a delay after tx FIFO is empty.

1. Add API to set tx idle interval before next data transmission. (The UART hardware can add an interval after tx FIFO is empty).
2. Set default tx idle interval to zero.
3. Add hardware disable in uart driver delete function.
2017-10-25 13:29:02 +08:00
michael
a6ac5b33c9 feat(rtc): open adc*(dac)_pad_get_io_num functions to public. 2017-10-24 12:06:14 +08:00
michael
cff8d30c25 refactor(rtc): change register writing from macros to structures in *_struct.h 2017-10-24 12:05:52 +08:00
Angus Gratton
01befe4d6a Merge branch 'bugfix/i2c_hw_fsm_recover' into 'master'
bugfix(i2c): add I2C hardware reset if the hw FSM get stuck

See merge request !1272
2017-10-23 10:16:02 +08:00
Ivan Grokhotkov
f039aac1e5 Merge branch 'bugfix/i2s_bck_polariy' into 'master'
bugfix(i2s): fix bck polarity issue when using pll clock.

See merge request !1428
2017-10-22 12:36:27 +08:00
Ivan Grokhotkov
000a4f5941 Merge branch 'bugfix/rmt_thresh_check' into 'master'
bugfix(rmt): fix event thresh check issue

See merge request !1423
2017-10-22 12:35:44 +08:00
Ivan Grokhotkov
59b7d98fec Merge branch 'feature/dfs' into 'master'
Dynamic frequency scaling

See merge request !1189
2017-10-22 12:34:11 +08:00
Wangjialin
ed1e32f583 bugfix(i2c): add I2C hardware reset if the hw FSM get stuck
Reported from different sources from github or bbs:

https://github.com/espressif/esp-idf/issues/680

https://github.com/espressif/esp-idf/issues/922

We tested reading several sensor or other I2C slave devices, if the power and SDA/SCL wires are in proper condition, everything works find with reading the slave.
If we remove the power supply for the slave during I2C is reading, or directly connect SDA or SCL to ground, this would  cause the I2C FSM get stuck in wrong state, all we can do is the reset the I2C hardware in this case.
After this commit, no matter whether the power supply of I2C slave is removed or SDA / SCL are shorted to ground, the driver can recover from wrong state.

We are not sure whether this the save issue with the reported one yet, but to make the driver more robust.

Further information:

1. For I2C master mode, we have tested different situations, e.g., to short the SDA/SCL directly to GND/VCC, to short the SDA to SCL, to un-plug the slave device, to power off the slave device. Under all of those situations, this version of driver can recover and keep working.
2. Some slave device will die by accident and keep the SDA in low level, in this case, master should send several clock to make the slave release the bus.
3. Slave mode of ESP32 might also get in wrong state that held the SDA low, in this case, master device could send a stop signal to make esp32 slave release the bus.

Modifications:

1. Disable I2C_MASTER_TRAN_COMP interrupt to void extra interrupt.
2. Disable un-used timeout interrupt for slave.
3. Add bus reset if error detected for master mode.
4. Add bus clear if SDA level is low when error detected.
5. Modify the argument type of i2c_set_pin.
6. add API to set timeout value
7. add parameter check for timing APIs
2017-10-21 02:10:59 +08:00
Ivan Grokhotkov
b6f37bda97 Merge branch 'feature/i2s_built_in_adc' into 'master'
feature(I2S-ADC): add ADC mode for I2S.

See merge request !1077
2017-10-20 15:52:56 +08:00
Angus Gratton
477ed8ce62 Merge branch 'bugfix/touchpad_dac_mismatch_on_tp8_tp9' into 'master'
bugfix(touch): add workaround for touch pad DAC hardware source mismatch on tp8 and tp9.

See merge request !1288
2017-10-20 14:18:32 +08:00
Wangjialin
a84db78eb1 bugfix(i2s): fix bck polarity issue when using pll clock.
reported from github: https://github.com/espressif/esp-idf/issues/1119

Digital team think it is due to the decimal divider.
We can reset the i2s tx and rx when calling i2s_stop to avoid this.
2017-10-19 23:23:01 +08:00
Wangjialin
ab1abff080 bugfix(rmt): fix event thresh check issue
reported from: https://github.com/espressif/esp-idf/issues/1011

1. Fix event thresh check issue
2. Change IO number in example in case it conflicts with GPIO16(psram cs pin).
2017-10-18 18:49:09 +08:00
Ivan Grokhotkov
5048d38ce7 spi slave: lock APB frequency while driver is in use 2017-10-18 14:37:21 +08:00
Ivan Grokhotkov
e4616588b7 spi master: lock APB frequency while in transaction 2017-10-18 14:19:21 +08:00
Ivan Grokhotkov
330b6bd668 sdmmc: lock APB frequency while in transaction 2017-10-18 14:19:20 +08:00
Ivan Grokhotkov
fba9678c56 uart: add support for REF_TICK 2017-10-18 14:19:20 +08:00
Gabriel Carstoiu
8128bb95ef fix(spi_slave): enable DMA clock when initialization.
merging in the code updates to the SPI master code done in commit b834fcf78a.

TW#15670, Closes #1027
2017-10-17 12:20:40 +08:00
michael
88f602a0e0 fix(periph_ctrl): fix reset function in periph_ctrl.c 2017-10-17 12:20:40 +08:00
michael
8e31a36562 feat(spi_slave): append trans_len field in trans_desc to show length actually transferred. 2017-10-17 12:01:12 +08:00
Ivan Grokhotkov
edb212986f Merge branch 'bugfix/sd_card_fixes' into 'master'
SD card fixes

See merge request !1393
2017-10-17 04:45:24 +08:00
Angus Gratton
0a52dbccca Merge branch 'bugfix/spi_reset_race' into 'master'
periph_ctrl: Refactor to add periph_module_reset(), avoid potential race in SPI DMA workaround

See merge request !1349
2017-10-13 08:51:36 +08:00
Ivan Grokhotkov
3cf23ff77d sdmmc: allow command timeouts to be configured
Previously the timeout was set to the same value (1000ms) for all kinds
of commands. In some cases, such as with slow cards, write commands
failed to complete in time.
This change makes command timeouts configurable via sdmmc_host_t
structure, and also makes default timeouts different for ordinary
commands and write commands.

Closes https://github.com/espressif/esp-idf/issues/1093

Ref TW15774.
2017-10-13 08:16:07 +08:00
Jiang Jiang Jian
8e47c355fa Merge branch 'feature/i2s_apll' into 'master'
driver/i2s: add support apll clock

See merge request !1115
2017-10-12 19:06:50 +08:00
Jiang Jiang Jian
e0922c9564 Merge branch 'bugfix/i2s_set_pin_valid_gpio' into 'master'
change to GPIO_IS_VALID_OUTPUT_GPIO for data out pin

See merge request !764
2017-10-12 18:21:25 +08:00
Jiang Jiang Jian
da247c2cf8 Merge branch 'bugfix/ledc_duty_type_change' into 'master'
ledc_get_duty return type changed from int to uint32_t, target_duty changed from int to uint32_t

See merge request !752
2017-10-12 18:18:33 +08:00
Jeroen Domburg
a8131b14b0 Merge branch 'feature/docs_update_uart_api' into 'master'
Updated functional overview of UART API documentation

See merge request !1328
2017-10-10 14:06:08 +08:00
Jeroen Domburg
1835c3a213 Merge branch 'feature/docs_update_pcnt_api' into 'master'
Extended description of the Pulse Counter API and removed redundant comments from the example

See merge request !1312
2017-10-10 14:06:03 +08:00
krzychb
9107b47deb Updated UART API documentation and examples. Included a fix of #1091 from GitHub 2017-10-10 05:54:36 +02:00
Tuan PM
9d39881981 i2s: add support apll clock
using apll_param to setup APLL

new apll calculation method, much faster

validate freq calculation

Ensure that the i2s frequency is greater than the hardware limit

Add description of how to calculate apll clock, support apll for other 16-bits audio, check rev0 chip

correct space
2017-10-06 15:36:24 +07:00
Angus Gratton
0dd9b899b7 periph_ctrl: Refactor to add periph_module_reset(), avoid potential race in SPI DMA workaround
Also refactor use of direct clock access in unit test ref_clock (probably not a real issue)
2017-10-02 17:48:16 +11:00
michael
fcd0f52e21 test(spi_master): add test case for 3 DMA issues with internal connection by gpio mux.
3 issues are:
1. RX buffer not aligned (start and end)
2. not setting rx_buffer
3. setting rx_length != length

also add spi release code here.
2017-09-27 10:44:28 +08:00
krzychb
e69691427c Extended description of the Pulse Counter API and removed redundant comments from the example 2017-09-26 22:44:46 +02:00
krzychb
b5e4c76bfe Updated sigma delta API documenation and example 2017-09-25 21:31:09 +02:00
Ivan Grokhotkov
64d1f947ed driver/rtc: fix copy-paste error in HOLD_FORCE field name for GPIO26
This error prevented EXT1 wakeup using GPIO26 from working.
2017-09-21 12:26:03 +08:00
Simon Werner
45ad0cdda2 Improved uart_flush() documentation.
Improved `uart_flush()` documentation based on this discussion: https://esp32.com/viewtopic.php?f=13&t=2804&p=13377&hilit=uart_flush#p13373

Merges https://github.com/espressif/esp-idf/pull/970
2017-09-20 12:09:44 +10:00
Wangjialin
449f9e10a3 bugfix(touch): add workaround for touch pad DAC hardware source mismatch on tp8 and tp9. 2017-09-19 20:10:39 +08:00
michael
1b91cb7be0 fix(sdspi): fix issues causing the sdspi driver to work low efficiently with DMA. 2017-09-19 19:00:47 +08:00
michael
074f36afff fix(spi_master): fix the heap corruption bug that RX DMA writes over the temporary buffer boundary.
TW#15434

Closes #994.
2017-09-19 16:47:14 +08:00
Kewal Shah
379320bdb2 change to GPIO_IS_VALID_OUTPUT_GPIO for data out pin 2017-09-14 13:33:39 +08:00
Wangjialin
2fceec4d85 feature(I2S-ADC): add ADC mode for I2S.
1. Support built-in ADC for I2S.
2. Modify code of ADC, made no change to the original APIs.
3. Add APIs in I2S:
esp_err_t i2s_set_adc_mode(adc_unit_t adc_unit, adc1_channel_t adc_channel);
4. Add I2S ADC/DAC example code.
5. add old-fashion definition to make it more compatible
6. replase spi_flash_ APIs with esp_partition_ APIs
7. add example of generating audio table from wav
8. change example sound
2017-09-14 13:24:08 +08:00
Kewal Shah
c4f15a0e5d ledc_get_duty return type changed from int to uint32_t, target_duty changed from int to uint32_t 2017-09-13 01:43:42 +08:00
Ivan Grokhotkov
23f10e1a57 Merge branch 'feature/uart_software_flow_control' into 'master'
uart: Add api call to switch on hardware support for 'software' flow control. (github #890)

See merge request !1215
2017-09-12 12:11:11 +08:00
Ivan Grokhotkov
de038f502c Merge branch 'feature/gpio_channel_macro' into 'master'
feat(global): add macros for GPIO->channel lookup

See merge request !1170
2017-09-11 12:15:08 +08:00
Ivan Grokhotkov
e12967297d Merge branch 'feature/docs_touch_pad_api' into 'master'
Touch Pad driver overview

See merge request !1195
2017-09-08 11:55:27 +08:00
Ivan Grokhotkov
3c470e7c43 Merge branch 'bugfix/rmt' into 'master'
RMT 2 fixes: Rename one API and specify wait_time in another API

See merge request !896
2017-09-07 18:03:08 +08:00
michael
08b9fbc242 feat(global): add macros for GPIO->channel lookup
including: macros for dac, adc, touch, rtc_gpio, uart and clk_out.

TW#13970
2017-09-07 10:40:25 +08:00
Alex Burr
93cc3a77cb uart: Add api call to switch on hardware support for 'software' flow control.
Cherry-picks https://github.com/espressif/esp-idf/pull/890
2017-09-05 16:30:21 +10:00
krzychb
ba42c46cb3 Touch Pad driver overview 2017-09-05 08:28:44 +02:00
Ivan Grokhotkov
b38186dc43 sdmmc: use periph_ctrl to enable peripheral when initializing the host 2017-09-04 22:43:52 +08:00
Ivan Grokhotkov
956a28a95c driver: add periph_ctrl support for SDMMC, SDIO slave, CAN, EMAC 2017-09-04 22:43:51 +08:00
michael
b834fcf78a fix(spi_master): this fix the SPI MOSI output missing bug. 2017-09-04 22:43:51 +08:00
Jeroen Domburg
fe140fe347 Fix off-by-one in 5MBaud arg checking; propagate errors better 2017-09-01 12:15:28 +08:00
Ivan Grokhotkov
1cfe96b1d7 Merge branch 'bugfix/i2s_dac_channel' into 'master'
fix(i2s_dac): fix the disable function which only disables DAC_CHANNEL_1.

See merge request !1169
2017-08-31 10:45:30 +08:00
Ivan Grokhotkov
b4857fc159 Merge branch 'bugfix/memory_issues_pr838' into 'master'
vfat, i2s, mdns: Fix two memory leaks, one double free (github #838)

See merge request !1173
2017-08-31 10:45:19 +08:00
Angus Gratton
96f9ae3e30 Merge branch 'bugfix/minor_prs_github' into 'master'
Minor bugfixes and corrections from github

See merge request !1181
2017-08-31 07:11:30 +08:00