gaoxu
5101e52a36
fix(adc): workaround to fix adc continuous get less results on c3
2024-02-21 13:54:29 +08:00
Armando
d8ee45ce08
adc: port gh pr to current adc continuous mode driver
...
DMA EOF may happens per multiple dma descriptors, instead of only one.
Closes https://github.com/espressif/esp-idf/pull/11500
2023-07-12 16:41:24 +08:00
Niklas Gürtler
5da5e1801b
Fix #10804 by running continuous ADC DMA in endless loop instead of restarting after each run (descriptor chain) to avoid losing samples. Use descriptor error callback for GDMA to check for DMA buffer overrun.
...
Signed-off-by: Armando <douyiwen@espressif.com>
2023-07-12 16:41:19 +08:00
Armando
f76f3dc83f
adc: fix adc continuous driver conv_frame_size not bigger than 4092 issue
...
Closes https://github.com/espressif/esp-idf/issues/11385
2023-07-12 16:41:11 +08:00
laokaiyao
13e74d5573
i2s: fixed i2s_ll compiling failure under C++ evironment
...
Closes: https://github.com/espressif/esp-idf/issues/11625
2023-06-26 15:42:36 +08:00
Armando
486c765a93
adc: remove adc_hal_conf.h
...
Macros inside adc_hal_conf.h are moved to adc_ll.h
2023-02-23 11:48:31 +08:00
Armando
5653018cd1
esp_adc: support selecting clock source for oneshot driver
2023-02-23 11:48:31 +08:00
morris
774a05399b
soc: fix wrong APB_CLK_FREQ value on esp32c6
2023-01-28 06:33:23 +00:00
laokaiyao
5333ac81bf
adc: support ADC on esp32c6 (driver/test/example)
2022-12-23 11:24:06 +08:00
laokaiyao
e27f3e3128
adc: support ADC on esp32c6 (hal)
2022-12-23 11:24:06 +08:00
Armando
5b523a3313
esp_adc: new esp_adc component and adc drivers
2022-07-15 18:31:00 +08:00
laokaiyao
28b8fc6a7e
i2s: update documents for driver-NG
2022-06-15 10:30:04 +08:00
laokaiyao
0fe3bb8ab7
i2s: update examples and unit-tests
2022-06-15 10:29:06 +08:00
laokaiyao
621d0aa942
i2s: Introduced a brand new driver
2022-06-15 10:29:06 +08:00
Armando
49747bb486
adc: create common adc hal layer
2022-05-07 19:20:44 +08:00
laokaiyao
f17edba20b
i2s: extract std/pdm/tdm modes
...
Type structures of these modes are defined. Driver and HAL layer are modified to fit these concepts.
2022-03-22 10:14:45 +08:00
Armando
386363cafd
adc: unify adc_ll_num_t and adc_unit_t
2022-03-18 11:36:50 +08:00
Armando
494b996ecc
sleep: restore analog calibration registers after waking up from light sleep
...
Closes https://github.com/espressif/esp-idf/issues/8287
Closes https://github.com/espressif/esp-idf/issues/7921
2022-03-04 12:10:20 +08:00
Armando
4dc0d6b2fe
adc: support adc dma driver on all chips
2021-12-16 00:19:15 +00:00
Cao Sen Miao
09487761cf
ESP8684: add freertos, hal, esp_system support
2021-11-06 17:33:44 +08:00
Armando
ddd0235783
adc: support adc self-calibration on esp32s3
2021-09-16 15:17:29 +08:00
Armando
c45c6f52f1
adc: support adc efuse-based calibration on esp32s3
2021-09-14 11:42:50 +08:00
Armando
3ce2d85e9e
adc: support adc2 working with WiFi
2021-07-28 17:50:14 +08:00
laokaiyao
27d9657b6c
driver/adc: support adc single sample on s3
2021-07-15 19:13:50 +08:00
Shu Chen
205cd469e9
esp32h2: update driver/hal/soc components to support esp32h2
2021-07-01 19:53:11 +08:00
morris
9afdf54748
hal: added HAL_ASSERT
2021-06-22 11:28:01 +08:00
morris
6e981af406
gdma: separate tx/rx channel interrupt
2021-05-06 15:06:37 +08:00
Armando
cc6bfcd9ac
adc: apply adc power API to adc driver
...
Closes https://github.com/espressif/esp-idf/issues/6269
Closes https://github.com/espressif/esp-idf/issues/6682
2021-03-26 17:58:00 +08:00
Armando
0e0baee25a
adc: add implementation of missed public API
...
Added ``adc1_pad_get_io_num``, ``adc2_pad_get_io_num`` and
``adc_vref_to_gpio``.
2021-03-26 12:04:46 +08:00
Armando
e9995fe165
adc: add pm_lock to adc driver on esp32c3
2021-03-26 12:04:46 +08:00
Armando
00a3f48bd8
adc: refactor adc single read api on esp32c3
2021-03-26 12:04:46 +08:00
Armando
69a0f8b9bb
adc: seperate hal layer and driver layer
2021-03-26 12:04:46 +08:00
Armando
5427c18781
adc: apply gdma api to adc on esp32c3
2021-02-08 11:41:21 +08:00
Michael (XIAO Xufeng)
351ba5ff9e
adc: fixed the issue that ADC power is left on after the calibration is done
...
Also refactor the locks in the adc_common.c file.
2021-02-05 14:17:52 +08:00
Michael (XIAO Xufeng)
2b83418141
adc: add fallback calibration method
...
Also:
1. Separate static configuration into init phase to improve
performance
2. Add a init code config layer to avoid duplicated configuration
3. Add a HW_CALIBRATION_V1 caps
2021-01-25 20:30:42 +08:00
Michael (XIAO Xufeng)
3d7da2c8ff
adc: simplify LL on C3
2021-01-25 15:08:55 +08:00
Armando
d8a4b247b9
adc_digi: update_adc_api_for_5M_freq_limit
...
The ``adc_digi_config_t`` struct is modified on esp32c3: configuration
of clock divider factors are not provided anymore. The SARADC sampling
frequency is provided instead. In this way, we can handle the frequency
limit better.
2021-01-25 04:51:40 +00:00
fuzhibo
19fb11549b
driver(adc): update adc ll and hal driver for esp32c3
2021-01-25 04:51:40 +00:00
Armando
02600309c8
adc: fix some regression issues
2021-01-25 04:51:40 +00:00
Armando
2b737c1927
adc: fix adc invalid data issue by update adc_reset
2021-01-25 04:51:40 +00:00
Armando
b38f4646de
adc_digi: add dma drivers
2021-01-25 04:51:40 +00:00
morris
e6d23a35ec
gdma: dynamic alloc DMA channels
2021-01-13 10:52:27 +08:00
Armando
2d37bfa126
driver: Add adc_digi single conversion mode
...
- add lock for single read and continuous read APIs
- update onetime read start singal delay for hardware limitation[*]
- move adc_caps to soc_caps.h
- update license dates
[*] There is a hardware limitation. If the APB clock frequency is high, the
step of this reg signal: ``onetime_start`` may not be captured by the
ADC digital controller (when its clock frequency is too slow). A rough
estimate for this step should be at least 3 ADC digital controller
clock cycle.
2020-12-23 09:53:24 +11:00
Angus Gratton
f09b8ae7a4
driver: Add esp32c3 ADC driver
...
Based on internal commit 3ef01301fffa552d4be6d81bc9d199c223224305
2020-12-23 09:53:24 +11:00
Michael (XIAO Xufeng)
647dea9395
soc: combine xxx_caps.h into one soc_caps.h
...
During HAL layer refactoring and new chip bringup, we have several
caps.h for each part, to reduce the conflicts to minimum. But this is
The capabilities headers will be relataive stable once completely
written (maybe after the featues are supported by drivers).
Now ESP32 and ESP32-S2 drivers are relative stable, making it a good
time to combine all these caps.h into one soc_caps.h
This cleanup also move HAL config and pin config into separated files,
to make the responsibilities of these headers more clear. This is
helpful for the stabilities of soc_caps.h because we want to make it
public some day.
2020-10-17 16:10:15 +08:00
Michael (XIAO Xufeng)
5425ef4ee4
hal: extract hal component from soc component
2020-09-01 13:25:32 +08:00