New —-list-separator argument of confgen.py and
prepare_kconfig_files.py is used to select which character is used
as list separator. For compatibility with esp-docs, we still keep
support for space separator. Otherwise esp-docs would have to choose
the separator depending on the IDF version.
esp_timer:
Control flow issues (DEADCODE)
Execution cannot reach this statement: "break;".
protocomm_httpd:
(UNUSED_VALUE)
Assigning value from "cookie_session_id" to "cur_cookie_session_id" here, but that stored value is overwritten before it can be used.
esp_flash_api:
Null pointer dereferences (REVERSE_INULL)
Null-checking "chip" suggests that it may be null, but it has already been dereferenced on all paths leading to the check.
Memory check (leaks and heap tracing) functions for unit tests
now have a separate file now and are renamed for more consistency.
BREAKING CHANGE: renamed memory check function names which may be used
in unit tests outside IDF.
gpio: Fix the bug that gpio interrupt cannot be triggered on app cpu on ESP32S3
Closes IDFGH-6211 and IDFGH-3635
See merge request espressif/esp-idf!15945
This commit updates the handles for the timer, task and event_group
modules to struct type. This matches upstream freertos source.
Signed-off-by: Sudeep Mohanty <sudeep.mohanty@espressif.com>
In commit de22f3a4e5, combination of
hardware and software MPI (bignum) related approach was used to
work around chip (e.g. ESP32-C3) limitation of max 3072 bits support.
This was done using linker "--wrap" flag but since the relevant API is
being used in same translation (compilation unit), hardware mode was not
getting used in some cases (e.g., RSA key generation).
This commit modified internal mbedTLS API and makes software+hardware
combination deterministic.
This commit updates the chip independent system chapters of the
programming guide for esp32s3.
Signed-off-by: Sudeep Mohanty <sudeep.mohanty@espressif.com>
For the CID10564,10384,10280,10098,10038,The memory was released in other place.
For the CID10365,it release the memory in the function when sent successfully.
For the CID10268,10011, we need not change the code.
Add TRY_ENTRY_CRITICAL() API to all for timeouts when entering critical sections.
The following port API were added:
- portTRY_ENTER_CRITICAL()
- portTRY_ENTER_CRITICAL_ISR()
- portTRY_ENTER_CRITICAL_SAFE()
Deprecated legacy spinlock API in favor of spinlock.h. The following API were deprecated:
- vPortCPUInitializeMutex()
- vPortCPUAcquireMutex()
- vPortCPUAcquireMutexTimeout()
- vPortCPUReleaseMutex()
Other Changes:
- Added portMUX_INITIALIZE() to replace vPortCPUInitializeMutex()
- The assembly of the critical section functions ends up being about 50 instructions longer,
thus the spinlock test pass threshold had to be increased to account for the extra runtime.
Closes https://github.com/espressif/esp-idf/issues/5301
fix: re-enabled fatfs r/w test on sdspi
fix: copyright notice
add: pin definitions for esp32c3
fix: Changed fixed spi dma channel to a macro definition
* provide light example for acting as zigbee coordinator, router and end-device
* remove unused componenent for example usage
* remove unused variable
* clean up unused header include for example
* update the license header
* update copyright
* Add readme for instruction adding esp-zboss-lib component
* esp-idf:update copy_right_check ignore file
* CI: fix the ci check error from pipeline
* sdkconfig: default set change for better user use
* use Button (BOOT) as switch input
* update the statemachine for debouncing
* esp-zboss-lib: support lib 0.0.2
* fix warning issue from example
As ESP32C3 does not have support for REF_TICK source clock, it is now not
possible to select it anymore.
Auto cfg clock has been improved for all boards.
MSYS/Mingw was deprecated since v4.0 and it is removed in v5.0. Please
follow the getting started guide of the documentation to set up a
Windows Command Line or Power Shell based environment.
peripheral enable/disable usually should be managed by driver itself,
so make it as espressif private APIs, not recommended for user to use it
in application code.
However, if user want to re-write the driver or ports to other platform,
this is still possible by including the header in this way:
"esp_private/peripheral_ctrl.h"
* Migrate test cases from IDF test runner to Unity fixture.
* Tighten heap checks in the test case a bit.
* Run formatting script on test_wl.c
* NEW: Define 4 test configurations, including configs with 512 byte
sector size. Previously these configs weren't tested in CI.
* NEW: The test app only runs for ESP32 and ESP32-C3 (one chip for
each architecture). The component is pretty high level so we don't
need to test it for each chip. This reduces the load on CI.
This commit fixes how the USB Host HCD handles sudden disconnections.
Bugs:
- HW channels remain active when the port suddenly disconnects, and
previously the channel would be disabled by setting the disabled bit,
then waiting for a disabled interrupt. However, ISOC channels do not
generate the disabled interrupt when the port is invalid, thus leading
to tasks getting indefinitely blocked in hcd_pipe_command().
Fix:
On a sudden disconnection, forcibly treat all channels as halted even
if their HCCHAR.ChEna bit is still set. We do a soft reset after a port
error anyways, so the channels will eventually be reset.
Closes https://github.com/espressif/esp-idf/issues/7505
This commit addes the 8/16 bit register field access workarounds to
the DWC_OTG peripheral. This workaround was applied to all other
peripherals in commit 874a720286.
During the early start, the virtual eFuse mode can call erase operations when OS is not yet running.
Possible workaround: CONFIG_SPI_FLASH_YIELD_DURING_ERASE=n
Fixed for the legacy flash driver as well.
usb_serial_jtag: Add secondary menu to support using usb_serial port to print when primary is uart
Closes IDF-3525 and IDF-3555
See merge request espressif/esp-idf!14554
FATFS provides a disk status and disk initialize callback which were not
implemented. Implementation has very low impact on SD/MMC speed and
fixes issues, when trying to open file when SD card was removed from
slot and not deinited.
If disk_status returns STA_NOINIT, it will always continue with
disk_initialize. If that returns 0, it will continue like everything is
working normally. So there has to be the same check as in disk_status.
Return of disk_initialize is always checked like this for STA_NOINIT or
STA_PROTECT so if command fails, we return the STA_NOINIT.
stat = disk_initialize(pdrv);
if (stat & STA_NOINIT) return FR_NOT_READY;
if (stat & STA_PROTECT) return FR_WRITE_PROTECTED;
Closes IDF-4125
esp_restart()/panic_restart() never resets the Digital system (so far required only by the Memprot feature) as there's a typo in the corresponding #define:
it checks CONFIG_ESP_SYSTEM_CONFIG_MEMPROT_FEATURE instead of CONFIG_ESP_SYSTEM_MEMPROT_FEATURE.
Issue fixed.
IDF-4094
The following changes have been made:
1. All FreeRTOS kernel source files are now placed in the
freertos/FreeRTOS-Kernel folder to match with the upstream folder structure.
2. All kernel include files are now placed in freertos/FreeRTOS-Kernel/include.
3. All port files are now placed in freertos/FreeRTOS-Kernel/portable.
4. All additions/customizations are placed in freertos/esp_additions.
5. All other miscellaneous files (README, License files etc.) are moved to
freertos/FreeRTOS-Kernel folder to match with the upstream.
6. Updated esp-cryptoauthlib to latest commit to resolve FreeRTOS
include dependencies.
Signed-off-by: Sudeep Mohanty <sudeep.mohanty@espressif.com>
This commit fixes a bug in no-split and allow-split ring buffers free buffer size calculation.
When the free size available in the buffers less than the size of one item header,
the function prvGetCurMaxSizeNoSplit/AllowSplit() incorrectly returned the maxItemSize instead of 0.
This is due to the comparision between a negative and a positive value
where both operands are treated as unsigned during the comparision operation,
thereby treating the negative operand as a large integer.
Also added new unit tests to test buffer-full and almost-full conditions
where this scenario is likely to be hit.
Closes https://github.com/espressif/esp-idf/issues/7344
Closes https://github.com/espressif/esp-idf/pull/7371
The release of the semaphore indicating the item was successfully sent must be the last semaphore released. The receiver may be in another task and may delete the Ringbuffer (such as with a return code across tasks design pattern) if they are through with the Ringbuffer.
The function xRingbufferSendAcquire followed by xRingbufferSendComplete had the semaphores released in the proper order and that same pattern should have been used in xRingbufferSend and xRingbufferSendFromISR. This commit fixes this order.
Issue (IDFGH-6030) #7716 describes the problem in more detail.
Closes IDFGH-6030, https://github.com/espressif/esp-idf/issues/7716
Closes IDFGH-6036, https://github.com/espressif/esp-idf/pull/7721
