| .. |
|
adc_channel.h
|
adc: make adc_channel.h macros work with ng driver
|
2023-01-09 14:25:24 +08:00 |
|
apb_saradc_reg.h
|
esp32c2: Add support for RNG
|
2022-06-02 11:36:23 +08:00 |
|
apb_saradc_struct.h
|
temperature_sensor: Add temperature sensor support for ESP32-C2
|
2022-06-23 15:36:43 +08:00 |
|
assist_debug_reg.h
|
feat(esp_system): implement hw stack guard for riscv chips
|
2023-07-01 16:27:40 +00:00 |
|
bb_reg.h
|
|
|
|
boot_mode.h
|
|
|
|
clk_tree_defs.h
|
feat(esp_hw_support): add api to gpio driver to support output internal clock on GPIO
|
2023-10-20 14:35:26 +08:00 |
|
dport_access.h
|
dport: Move DPORT workaround to G0
|
2022-05-31 13:44:18 +08:00 |
|
dport_reg.h
|
dport: Move DPORT workaround to G0
|
2022-05-31 13:44:18 +08:00 |
|
ecc_mult_reg.h
|
esp32c2/hal: Added ECC HAL layer
|
2022-03-08 14:05:23 +00:00 |
|
efuse_defs.h
|
efuse: Update efuses for esp32 esp32c2 esp32c3 esp32s2 esp32s3
|
2023-04-04 22:32:32 +08:00 |
|
efuse_reg.h
|
efuse: Update efuses for esp32 esp32c2 esp32c3 esp32s2 esp32s3
|
2023-04-04 22:32:32 +08:00 |
|
efuse_struct.h
|
efuse: Update efuses for esp32 esp32c2 esp32c3 esp32s2 esp32s3
|
2023-04-04 22:32:32 +08:00 |
|
ext_mem_defs.h
|
feat(soc): added flash operation range macros in ext_mem_defs.h
|
2023-10-16 17:19:04 +08:00 |
|
extmem_reg.h
|
|
|
|
fe_reg.h
|
|
|
|
gdma_channel.h
|
feat(esp_gdma): add hal interface for common operations
|
2023-07-10 13:45:57 +08:00 |
|
gdma_reg.h
|
|
|
|
gdma_struct.h
|
|
|
|
gpio_num.h
|
refactor(gpio): per-target gpio number definition
|
2023-07-03 13:33:11 +08:00 |
|
gpio_pins.h
|
|
|
|
gpio_reg.h
|
|
|
|
gpio_sig_map.h
|
|
|
|
gpio_struct.h
|
|
|
|
hwcrypto_reg.h
|
esp32c2: xts-aes register prefix discrepency
|
2023-05-25 11:27:18 +05:30 |
|
i2c_reg.h
|
|
|
|
i2c_struct.h
|
|
|
|
interrupt_core0_reg.h
|
|
|
|
interrupt_reg.h
|
fix(freertos): Use INTERRUPT_CURRENT_CORE_INT_THRESH_REG for esp32p4
|
2023-09-07 15:25:35 +08:00 |
|
interrupts.h
|
feat(esp_timer): Support systimer for ESP32P4
|
2023-09-13 19:13:38 +08:00 |
|
io_mux_reg.h
|
gpio: support glitch filter
|
2022-12-09 11:33:42 +08:00 |
|
Kconfig.soc_caps.in
|
fix(console): enable to select UART1 port for console output
|
2023-11-09 22:32:49 +08:00 |
|
ledc_reg.h
|
ledc: Provide support for esp32c2 and esp32h2
|
2022-04-14 08:15:14 +00:00 |
|
ledc_struct.h
|
ledc: Provide support for esp32c2 and esp32h2
|
2022-04-14 08:15:14 +00:00 |
|
mmu.h
|
change(soc): added SOC_ prefix to mmu defs
|
2023-09-05 15:47:26 +08:00 |
|
modem_clkrst_reg.h
|
Fix soc caps for BT
|
2022-06-03 21:45:40 +08:00 |
|
nrx_reg.h
|
|
|
|
periph_defs.h
|
refactor(interrupt):put the interrupts definitions in soc/interrupts.h
|
2023-07-17 19:31:56 +08:00 |
|
reg_base.h
|
esp32c2: xts-aes register prefix discrepency
|
2023-05-25 11:27:18 +05:30 |
|
regi2c_bbpll.h
|
Refactor: move regi2c_*.h header files from esp_hw_support to soc component
|
2022-06-30 09:40:44 +00:00 |
|
regi2c_bias.h
|
Refactor: move regi2c_*.h header files from esp_hw_support to soc component
|
2022-06-30 09:40:44 +00:00 |
|
regi2c_brownout.h
|
G0: RISC-V targets have now an independent G0 layer
|
2022-06-14 15:00:53 +08:00 |
|
regi2c_defs.h
|
1.add ldo parameters in efuse table; 2.set ldo dbias based on pvt-efuse; 3.add pll cali stop function; 4. add efuse_ocode
|
2022-08-05 14:24:51 +08:00 |
|
regi2c_dig_reg.h
|
Refactor: move regi2c_*.h header files from esp_hw_support to soc component
|
2022-06-30 09:40:44 +00:00 |
|
regi2c_lp_bias.h
|
Refactor: move regi2c_*.h header files from esp_hw_support to soc component
|
2022-06-30 09:40:44 +00:00 |
|
regi2c_saradc.h
|
G0: RISC-V targets have now an independent G0 layer
|
2022-06-14 15:00:53 +08:00 |
|
reset_reasons.h
|
|
|
|
rtc_cntl_reg.h
|
fix(wdt): move non-auto generated wdt values to ll
|
2023-09-05 11:52:34 +08:00 |
|
rtc_cntl_struct.h
|
soc: fix register header files not self-contain
|
2022-07-29 11:18:06 +08:00 |
|
rtc.h
|
fix chip broken bug when run in monitor mode of S2 and modify voltage param to fit all sleep mode of S2/C2/C3
|
2023-04-10 18:04:24 +08:00 |
|
sensitive_reg.h
|
|
|
|
sensitive_struct.h
|
|
|
|
soc_caps.h
|
fix(console): enable to select UART1 port for console output
|
2023-11-09 22:32:49 +08:00 |
|
soc_pins.h
|
|
|
|
soc.h
|
fix(soc): fix wrong freq definition for 26Mhz version esp32c2 soc
|
2023-07-15 01:54:48 +08:00 |
|
spi_mem_reg.h
|
|
|
|
spi_mem_struct.h
|
C/Cxx: unify static assertions with the macro ESP_STATIC_ASSERT
|
2022-11-21 16:18:08 +08:00 |
|
spi_pins.h
|
|
|
|
spi_reg.h
|
|
|
|
spi_struct.h
|
|
|
|
syscon_reg.h
|
Fix soc caps for BT
|
2022-06-03 21:45:40 +08:00 |
|
syscon_struct.h
|
soc: fix register header files not self-contain
|
2022-07-29 11:18:06 +08:00 |
|
system_reg.h
|
esp32c6: clean up existing soc files and header file inclusion in IDF to be compatible with the new chip
|
2022-09-01 12:28:06 +08:00 |
|
system_struct.h
|
feat(gptimer): use RCC atomic block to enable/reset peripheral
|
2023-08-22 17:05:35 +08:00 |
|
systimer_reg.h
|
|
|
|
systimer_struct.h
|
systimer: refactor hal to accomodate more xtal choices
|
2022-07-25 16:08:52 +08:00 |
|
timer_group_reg.h
|
fix(wdt): move non-auto generated wdt values to ll
|
2023-09-05 11:52:34 +08:00 |
|
timer_group_struct.h
|
WDT: implement interrupt wdt and task wdt for ESP32-C2
|
2022-09-15 14:37:59 +08:00 |
|
uart_channel.h
|
|
|
|
uart_pins.h
|
|
|
|
uart_reg.h
|
|
|
|
uart_struct.h
|
driver: fix public header exceptions for driver
|
2022-07-22 00:12:36 +00:00 |
|
wdev_reg.h
|
|
|
|
xts_aes_reg.h
|
esp32c2: xts-aes register prefix discrepency
|
2023-05-25 11:27:18 +05:30 |
46d33e46ef