Martin Vychodil
dd938eb952
System/Security: Memprot API unified (ESP32C3)
...
Unified Memory protection API for all PMS-aware chips (ESP32C3)
Closes JIRA IDF-3849
2021-12-21 01:50:36 +01:00
Cao Sen Miao
e3d14858c7
rtc_clk: change clock source from xtal to pll on real board(ESP8684)
2021-12-15 12:21:11 +08:00
Michael (XIAO Xufeng)
b23ed0ee81
Merge branch 'feature/update_adc_cali_due_to_efuse_version_change' into 'master'
...
adc: update s3 adc calibration efuse version
Closes IDF-4069
See merge request espressif/esp-idf!15843
2021-12-14 07:27:35 +00:00
Armando
9a6f894046
psram: add octal psram ECC feature
2021-12-13 20:24:52 +08:00
Armando
021e8817cf
psram: make psram wrap mode unavailable
2021-12-13 20:19:32 +08:00
Armando
bfb2a264c6
adc: update adc calibration efuse version
...
ADC calibration scheme and algorithm are not changed. Only the eFuse bit BLOCK1_VERSION is changed. This MR updated the logic to recognize the adc efuse version
2021-12-13 13:00:13 +08:00
Cao Sen Miao
463cf2cf1c
ESP8684: Clean up ESP8684 code, remove useless code, update headers
2021-12-09 18:36:39 +08:00
Simon
6f9b89f619
Merge branch 'bugfix/usb_no_rom_log' into 'master'
...
USB_SERIAL_JTAG: Fix the issue that there is no rom/bootloader log when restarting
Closes IDF-4173
See merge request espressif/esp-idf!16057
2021-12-07 08:16:10 +00:00
Cao Sen Miao
17ea9d7faf
USB_SERIAL_JTAG: Fix the issue that there is no rom log when restarting
2021-11-29 20:26:09 +08:00
jingli
0ea1825f64
reduce bootup time when using usb-serial-jtag
2021-11-29 17:21:11 +08:00
wuzhenghui
388615add0
update esp32h2beta2 chip_id to 14
2021-11-24 12:30:43 +08:00
wuzhenghui
968c42d88c
822 FPGA rnv init
2021-11-24 12:30:17 +08:00
morris
207891ef6c
clk: fix esp32h2 print wrong CPU frequency
2021-11-15 17:40:51 +08:00
Cao Sen Miao
ce1ee3d8ae
psram: add ESP32-D0WD-R2-V3 support
2021-11-12 13:52:24 +08:00
morris
16677b0d3c
global: make periph enable/disable APIs private
...
peripheral enable/disable usually should be managed by driver itself,
so make it as espressif private APIs, not recommended for user to use it
in application code.
However, if user want to re-write the driver or ports to other platform,
this is still possible by including the header in this way:
"esp_private/peripheral_ctrl.h"
2021-11-08 10:37:47 +08:00
Cao Sen Miao
3934e24d22
ESP8684: add spi_flash, efuse, hw_support support
2021-11-06 17:33:44 +08:00
Armando
c331c85318
mspi: make cpu clock source switch safe
...
For some of the MSPI high frequency setting (e.g. 80M DDR mode Flash or PSRAM), timing tuning is required.
Certain delays will be added to the MSPI RX direction. When system clock switches down, the delays should be
cleared. When system clock switches up, the delays should be restored.
2021-10-19 21:47:27 +08:00
wuzhenghui
5000aa877f
fix rtc_clk_cal: Wait for timeout in a loop instead of just judge once
2021-10-19 12:07:34 +08:00
wuzhenghui
ab9df9945f
fix stuck in rtc_clk_cal
2021-10-14 16:25:54 +08:00
Li Shuai
73829221f5
esp_hw_support: force power down wifi and bt power domain when rtc module init
2021-10-14 10:51:10 +08:00
Armando
16a91399f1
psram: put opiram_psram and spiram_psram in internal ram
...
External memory is accessed via SPI0. When modifying the SPI0 registers,
should put the code in internal RAM. Otherwise when there is an ongoing
SPI0 transaction, CPU changes the SPI0 registers. This is dangerous.
Besides, modifying SPI0 registers may lead external memory to an
unstable state. Therefore putting these code in internal RAM is
necessary.
2021-10-08 17:39:41 +08:00
Armando
7ff9332243
rtc: fix mspi timing issue when self-calibrate ocode
...
When doing OCode self-calibration in rtc_init.c, it will change the
system clock from PLL to XTAL, which is in a lower frequency, and MSPI
timing tuning is not needed. Therefore we should modify the timing
configurations accordingly, and set it back after the calibration.
This is a temporary fix
2021-10-08 15:59:57 +08:00
Armando
4cafdbd83b
mspi: fix psram cs timing register setting not in iram bug
2021-10-08 15:59:57 +08:00
Armando
2655a506c9
mspi: support auto detect octal flash vendor
2021-10-08 15:59:57 +08:00
Martin Vychodil
5344de34c3
System/Memprot: fixed voltage glitching detection logic
...
When the application is being debugged it should check the call result (esp_cpu_in_ocd_debug_mode())
is not given volt.glitch attack - so the result is triple-checked by ESP_FAULT_ASSERT macro. In case
the check fails, the system is reset immediately
IDF-4014
2021-10-04 09:21:07 +02:00
Jiang Jiang Jian
f5ae8b0533
Merge branch 'feature/ledc_use_rtc8m_or_xtal_lightsleep' into 'master'
...
support RTC8M and XTAL power domain in light sleep mode
Closes IDF-3419
See merge request espressif/esp-idf!15152
2021-09-27 04:02:29 +00:00
Jiang Jiang Jian
a015123a1d
Merge branch 'feature/rename_apbctrl_to_syscon' into 'master'
...
rename apbctrl to syscon
See merge request espressif/esp-idf!14524
2021-09-16 12:58:07 +00:00
Wu Zheng Hui
1080e4f6a2
rename APB_CTRL ro SYS_CON
...
save
2021-09-16 20:57:57 +08:00
Armando (Dou Yiwen)
b9ea273e78
Merge branch 'feature/suppport_self_icode_calibration_on_s3' into 'master'
...
adc: support self calibration icode on s3
Closes IDF-3913
See merge request espressif/esp-idf!15195
2021-09-16 11:14:58 +00:00
Armando
ddd0235783
adc: support adc self-calibration on esp32s3
2021-09-16 15:17:29 +08:00
Li Shuai
b3e27403f3
esp_hw_support: keep external 40 MHz xtal related analog circuit power on during sleep
2021-09-16 14:46:21 +08:00
Li Shuai
58292a7d22
Power Management: add XTAL power domain to control whether external 40MHz xtal is powered down during sleep
2021-09-16 14:43:43 +08:00
Li Shuai
f5b39a7cde
esp_hw_support: No voltage drop during light sleep to ensure stable output clock of rtc8m oscillator
2021-09-16 14:40:46 +08:00
Li Shuai
b59902f4d1
Merge branch 'bugfix/esp32s3_lightsleep_psram_leakage_current' into 'master'
...
fix SPIRAM leakage when its CS pin has no hardware pullup
See merge request espressif/esp-idf!14730
2021-09-16 04:07:58 +00:00
Armando
ea10dacf68
mspi: add octal psram get_cs_io function
2021-09-15 20:34:18 +08:00
chenjianqiang
9b53e18c44
add flash and PSRAM CS IO acquire function
2021-09-15 20:34:17 +08:00
Armando
c45c6f52f1
adc: support adc efuse-based calibration on esp32s3
2021-09-14 11:42:50 +08:00
Li Shuai
e44ead5356
Power Management: add RTC8M power domain to control whether internal 8m oscillator is powered down during sleep
2021-09-13 17:36:54 +08:00
Sachin Parekh
0e6b03f343
esp32s2/hmac: Release HMAC lock in downstream mode incase of failure
2021-09-06 11:21:39 +05:30
Sachin Parekh
fd5a7df404
esp32h2: Replicated HMAC JTAG downstream enable mode implementation
2021-09-06 11:06:50 +05:30
Sachin Parekh
fa2707f1f3
hmac: Added Downstream JTAG enable mode for esp32c3 and esp32s3
...
If JTAG is disabled temporarily by burning SOFT_DIS_JTAG, it can be
re-enabled temporarily through esp_hmac_jtag_enable API
2021-09-06 11:06:50 +05:30
Sachin Billore
f80d6f8c21
Digital Signature support for S3
...
Closes IDF-1791
2021-09-02 11:59:24 +05:30
Marius Vikhammer
bdf3a8ff29
Merge branch 'feature/xtwdt' into 'master'
...
WDT: Add support for XTAL32K Watchdog timer
Closes IDF-2575
See merge request espressif/esp-idf!15000
2021-09-02 02:44:47 +00:00
Marius Vikhammer
4869b3cd4a
WDT: Add support for XTAL32K Watchdog timer
2021-09-02 09:09:00 +08:00
Armando (Dou Yiwen)
5f38b766a8
Merge branch 'feature/support_120mhz_quad_psram_quad_flash' into 'master'
...
mspi: support 120MHz clock freq on QSPI flash/psram on ESP32-S3
Closes IDF-3711
See merge request espressif/esp-idf!14849
2021-09-01 02:46:05 +00:00
Armando
a3dc625da6
mspi: support 120MHz Quad Flash and PSRAM on ESP32S3
2021-08-31 16:06:44 +08:00
Marius Vikhammer
2e0cab6f94
himem: reverse error check logic in himem
2021-08-31 08:46:27 +08:00
SalimTerryLi
55a5c444b5
rtc_io, esp_himem: replace XXX_CHECK with ESP_RETURN_ON_FALSE
2021-08-30 11:18:34 +08:00
Martin Vychodil
58aed7df98
ESP32S2: No assert()/abort() in Memprot API, use esp_err_t instead
...
JIRA IDF-3634
2021-08-26 09:20:00 +02:00
Shu Chen
f8f9e545e8
Merge branch 'feature/support_esp32h2_hw_support' into 'master'
...
Feature/support esp32h2 hw support
Closes IDF-3378 and IDF-3396
See merge request espressif/esp-idf!14545
2021-08-26 06:00:27 +00:00