Fixed some BLE controller bugs on ESP32-C3 and ESP32-S3
Closes BT-2760, BT-2733, BT-2687, BT-2588, BT-2574, BT-2470, and BT-2355
See merge request espressif/esp-idf!19970
Fixed calling esp_ble_get_cur_sendable_packets_num() sometimes crashes when bluetooth is disconnecting
Closes BT-2699
See merge request espressif/esp-idf!19993
This commit synchronizes multiple functions in tasks.c with upstream v10.4.3
that contain minor differences.
The following functions have had their parameter names or code formatting
updated:
- xTaskCreateStaticPinnedToCore()
- xTaskCreatePinnedToCore()
- prvInitialiseNewTask()
- prvTaskIsTaskSuspended()
- vTaskStartScheduler()
- xTaskResumeAll()
- xTaskCheckForTimeOut()
- uxTaskResetEventItemValue()
The following functions have had their missing "xAlreadyYielded" restored
- xTaskDelayUntil()
- vTaskDelay()
The following functions have had their critical section/interrupt disdable
usage update
- vTaskSuspendAll()
- xTaskGetTickCountFromISR()
- xTaskGetApplicationTaskTagFromISR()
This commit synchronizes multiple functions that contain major differences with
upstream v10.4.3. Multi-core modifications are then reapplied to the function.
Vanilla code uses "pxTCB == pxCurrentTCB" to check whether a task is currently
running. This commit adds the following macros instead.
- taskIS_CURRENTLY_RUNNING()
- taskIS_CURRENTLY_RUNNING_ON_CORE()
The following functions have been updated to use those macros instead.
- eTaskGetState()
- vTaskPrioritySet()
- vTaskResume()
The following functions have been synchronized with upstream v10.4.3.
Multi-core modifications are then reapplied.
- vTaskSuspend()
- vTaskDelete()
- prvGetExpectedIdleTime()
This commit synchronizes multiple functions in queue.c with upstream v10.4.3.
Multi-core modifications are then reapplied to these functions. The following
functions were modified:
prvNotifyQueueSetContainer()
xQueueGenericCreateStatic()
xQueueGenericCreate()
xQueueGetMutexHolder()
xQueueCreateCountingSemaphoreStatic()
xQueueCreateCountingSemaphore()
xQueueGenericSend()
xQueueGenericSendFromISR()
xQueueReceiveFromISR()
uxQueueMessagesWaiting()
prvUnlockQueue()
prvIsQueueFull()
xQueueAddToSet()
xQueueRemoveFromSet()
prvNotifyQueueSetContainer()
Note: The SEGGER_SYSVIEW traceQUEUE_SEND() macro was updated as the
xCopyPosition argument is no longer available in scenarios where the
macro is called.
- The callback `open_fn` is used for creating a new SSL session
with httpd_sess_new.
- If the call fails, the active socket count (httpd_data->hd_sd_active_count)
is not incremented. But, httpd_sess_delete is called, which decrements the
count, resulting in a negative value for several failed session creations
in a row.
Closes https://github.com/espressif/esp-idf/issues/9683
- Fixed the performance issue of usage of PLL track related baseband IRQsFixed the performance issue of BLE sync scan in coexistence scenario when PLL track is enabled
- Fixed connect failed due to error sync found signal
- Fixed BLE disconnect failed due to terminate_ind have sent but no ACK is received
- Added ADV mode error check in ADV rx isr handler function
- Fixed BLE RAL_UNDERRUN and TX_CRYPT_ERR assert
- Disable scan continue
- Fixed scan forever if scan continue is disable
bt: Fixed sink not being able to output mono audio because it can only decode dual channel audio data
Closes BT-2698
See merge request espressif/esp-idf!19759
define: lock_bits = (lock->status & LOCK_MASK) >> LOCK_SHIFT; This `lock_bits` is the Bit 29-20 of the lock->status
1. spi_hdl_1:
acquire_end_core():
uint32_t status = lock_status_clear(lock, dev_handle->mask & LOCK_MASK);
Becuase this is the first `spi_hdl_1`, so after this , lock_bits == 0`b0. status == 0
2. spi_hdl_2:
acquire_core:
uint32_t status = lock_status_fetch_set(lock, dev_handle->mask & LOCK_MASK);
Then here status is 0`b0, but lock_bits == 0`b10. Because this is the `spi_hdl_2`
3. spi_hdl_2:
`acquire_core` return true, because status == 0. `spi_bus_lock_acquire_start(spi_hdl_2)` then won't block.
4. spi_hdl_2:
spi_device_polling_end(spi_hdl_2).
5. spi_hdl_1:
acquire_end_core:
status is 0, so it cleas the lock->acquiring_dev
6. spi_hdl_2:
spi_device_polling_end:
assert(handle == get_acquiring_dev(host)); Fail
Closes https://github.com/espressif/esp-idf/issues/8179
This commit fixes incorrect usage of memset() in the HCD's various
_buffer_parse_...() functions. The memset was not clearing the qtd lists, and
were simply setting the first qtd to a non zero value (i.e., the length of
the QTD list).
However, no bug occurred as the subsequent _buffer_fill_...() functions would
overwrite the QTD list anyways.
This commit adds support for using the RTC I2C peripheral on the ULP
RISC-V core for esp32s2 and esp32s3. It also adds an example to demonstrate the
usage of the RTC I2C peripheral.
This commit also modifies the rtc_i2c register structure files to enable
the use of bitfields in the ULP RISC-V RTC I2C driver.
bt:Fixed deadlock due to wrong parameter when calling btc_transfer_context() after calling esp_bluedroid_disable()
Closes IDFGH-8175 and BT-2744
See merge request espressif/esp-idf!19859
This commit fixes build issue because of function `bootloader_common_reset_rtc_retain_mem`
getting inlined with compiler optimization level set to `PERF` (-O2).
Build failure log:
-----------------
In function 'bootloader_common_reset_rtc_retain_mem',
inlined from 'bootloader_common_update_rtc_retain_mem' at /h/esp-idf/components/bootloader_support/src/bootloader_common_loader.c:183:13:
/h/esp-idf/components/bootloader_support/src/bootloader_common_loader.c:159:5: error: 'memset' writing 16 bytes into a region of size 0 overflows the destination [-Werror=stringop-overflow=]
159 | memset(rtc_retain_mem, 0, sizeof(rtc_retain_mem_t));
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
update gpio_sig at `spics_out` array in each spi_periph.c of chips later than s2
then `spi_bus_add_device` can correctly distribute gpio_signals for cs_signal
Closes https://github.com/espressif/esp-idf/issues/8876
esp_https_ota: fix bug where `http_client_init_cb` is called after esp_http_client_perform()
Closes IDFGH-8080
See merge request espressif/esp-idf!19897
`wifi_prov_mgr_is_provisioned()` API uses the `esp_wifi_get_config()` API
to check if Wi-Fi credentials are configured. It does not really require
any other information from the wifi_prov component. Hence, this commit
removed dependency of this API on provisioning manager initialization state.
Closes IDF-5878
In previous gpio default isr, interrupt status bits get cleared at the exit of the isr.
However, for edge-triggered interrupt type, the interrupt status bit should be cleared before entering the per-pin handlers to avoid any potential interrupt lost.
Closes https://github.com/espressif/esp-idf/pull/6853
heap: remove misleading info about malloc being equivalent to heap_caps_malloc(p, MALLOC_CAP_8BIT)
Closes IDFGH-5971
See merge request espressif/esp-idf!19889
Wrap the ledc, i2c source files with the new caps in CMakeLists and linker.lf.
This could avoid potential source file not found warning during linking time.
User's custom data are not taken into account during the CRC calculation anymore.
Which means taht the retained mem structure is not systematically erased
on each reboot anymore.
For usb_serial_jtag REPL only, xTaskCreate was passing a pointer to
esp_console_repl_com_t, while esp_console_repl_task was expecting
a pointer to esp_console_repl_universal_t.
The way the two structures are defined, this makes no difference, and
the pointer values are the same. Still, this could potentially break
in the future.
(I am not sure what is the distinction between repl_com (common?) and
repl_universal; it seems that `int uart_channel` could just as well
be part of esp_console_repl_com_t; alternatively, as suggested in the
previous commit, this structure could contain a callback function
pointer, which would allow `esp_console_new_repl_*` functions to
specify how stdin/stdout should be initialized by the REPL task.)
The crash occurred when calling setvbuf(stdin,...) with stdin==NULL.
This happened because esp_console_repl_task started running before
its args->uart_channel was initialized; then esp_console_repl_task
went into the code path 'uart_channel != CONFIG_ESP_CONSOLE_UART_NUM',
and tried to 'fopen("/dev/uart/0");`
Since the UART VFS is not registered when ESP_CONSOLE_USB_SERIAL_JTAG
option is enabled, fopen failed and 'stdin' was NULL.
Fix by moving the initialization of repl task arguments before the
start of the task, same as it is done for the usb_cdcacm case.
The crash started happening after the commit 287ab7566b. I haven’t
verified this, but I guess the reason why it wasn’t happening before
was that xTaskCreate was not correctly yielding to the newly created
higher-priority 'repl' task, therefore the code which was setting
the repl task arguments after xTaskCreate had time to execute.
It should be noted that the 'uart_channel' argument is a bit hacky,
in the first place. The code should be refactored to pass a callback
function to the repl task, and let this callback initialize stdin and
stdout based on the chosen console channel. Then esp_console_repl_task
does not require assumptions about the specific interface used.
Closes https://github.com/espressif/esp-idf/issues/9662
essl_spi: fix wrong dummy cycle under quad spi mode ant add a test to verify spi quad mod
Closes IDF-5182 and IDF-5181
See merge request espressif/esp-idf!18680
There are multiple changes in this commit:
1. Unify the RISC-V and ULP-FSM code paths in esp32ulp_mapgen.py.
It seems that these were originally introduced because `nm` output
for the RISC-V case contained symbol sizes, while for the ULP-FSM
no symbol sizes were reported. This makes sense, because the
ULP-FSM object files are produced from assembly source, symbol
sizes have to be added manually using the .size directive.
In the case of RISC-V, the object files are built from C sources
and the sizes are automatically added by the compiler.
Now 'posix' output format is used for both RISC-V and ULP-FSM.
2. Move BASE_ADDR out of esp32ulp_mapgen.py. This now has to be passed
from CMake, which should make it easier to modify if a new chip
with a different RTC RAM base address is added.
3. Add C++ guards to the generated header file.
4. Switch from optparse to argparse for similarity with other IDF
tools.
5. Add type annotations.
* "dummy loop to force pre-processed linker file generation" seems to
be unnecessary. It looks like the idea was copied from the
dependency of ULP-FSM preprocessed source files on the LD script.
* Can use add_dependencies instead of
set_target_properties(...LINK_DEPENDS...) which is more readable
* Use target_link_options instead of target_link_libraries, which is
supported starting from CMake 3.13. Unlike target_link_libraries,
it doesn't require manually quoting the pats.
This commit gives basic mmu driver framework. Now it is able to maintain
mmu virtual address usage on esp32, esp32s2 and esp32s3. Usage to
external virtual address should rely on mmu functions to know which
address range is available, instead of hardcoded.
This commit also improves psram memory that is added to the heap
allocator. Now it's added to the heap, according to the memory
alignment.
Closes https://github.com/espressif/esp-idf/issues/8295
This commit extends the heap test set by adding a test to check corruption
detection in free memory block.
For each byte of the free block memory, the test changes the value of the byte,
call multi_heap_check(), make sure that the function returns 'corruption detected'
only when comprehensive poisoning is set, restore the good value of the byte, calls
multi_heap_check() again and make sure that it returns 'OK'.
The tlsf implementation in the ROM does not provide a mechanism
to register a callback to be called in by tlsf_check().
This commit is creating a patch of the tlsf implementation to provide
a definition of the function allowing to register the callback called
in tlsf_check() and add the call of this callback in tlsf_check().
This patch is only compiled for target(s) with ESP_ROM_HAS_HEAP_TLSF
set and ESP_ROM_TLSF_CHECK_PATCH set. For all the other configurations
the environment remains unchanged by those modifications.
Add the definition of tlsf_check_hook() in multi_heap if MULTI_HEAP_POISONING
is set. This definition calls the multi_heap_internal_check_block_poisoning()
to check the memory of a free block for corruption. If the light poisoinng is
set this function returns true. If the comprehensive poisoning is set, this
function will check that all byte of memory in the memory chunk passed as parameter
are set to the right FILL pattern.
sdio_slave: workaround the sdio_slave crash issue with release config + GCC11
Closes IDFCI-1296, IDFCI-1297, and IDFCI-1298
See merge request espressif/esp-idf!19680
Prior to this commit, esp_psram/include/esp_private/mmu.h contains some
APIs that is used for:
- copy flash content to psram
- necessary sync APIs used by flash_mmap.c, due to above feature
This commit rename it to mmu_psram_flash.h, therefore mmu.h can be used
for real mmu related APIs.
This commit also moves above mention funcitons in `mmu.c` and
`mmu_psram.c` to `mmu_psram_flash.c`, leaving `mmu.c` to be used for
real mmu driver.
This commit fixes gpio_hold_en(pin) function for ESP32, where after wakeup from deep sleep, the pin gets reset to default state and stop holding the pin level.
This commit synchronizes the following xTaskRemoveFrom...EventList() with
upstream v10.4.3. Multi-core modifications are then reapplied to the
functions.
The functions updated are:
- xTaskRemoveFromEventList()
- vTaskRemoveFromUnorderedEventList()
The following multi-core macros have been removed as they are no longer
required.
- tskCAN_RUN_HERE()
- taskYIELD_OTHER_CORE()
This commit synchronizes the following vTaskPlaceOnEventList...() with
upstream v10.4.3.
The functions updated are:
- vTaskPlaceOnEventList()
- vTaskPlaceOnUnorderedEventList()
- vTaskPlaceOnEventListRestricted()
The traceTASK_DELAY_UNTIL() macro has also been updated.
Usage of `mbedtls_ssl_conf_sig_algs()` was incorrect, it must include signature
algorithm with hash. This change is as per requirement defined in mbedTLS-3.2.1
release.
1.The dummy_bits is set to 4 in ESP32C3/C2, therefore, the data transmission started too early.This commit fix this issue by changing dummy_bits to 8.
2.Put the spi command the spi defintion in spi_types.h
3.Put the function which get spi command or dummy bits in spi_ll.h
'linux' component provides some of the common header files, such as
'sys/queue.h' and 'sys/lock.h'. For chip targets, it is possible to
include these files without having to add any extra requirements.
With this change, the same behavior will apply for the linux target.
Added a kconfig option. By default, when using ADC oneshot
driver, it will disable
DAC channels:
- ESP32: IO25, IO26
- ESP32S2: IO17, IO18
if ADC2 is in use.
You can disable this option, to measure DAC output, via internal ADC.
This is for test usage.
bt:No need to use local copy of btc_msg_t in btc_transfer_context, create it on heap and pass to osi_thread_post()
Closes IDFGH-8021
See merge request espressif/esp-idf!19577
uart: update console docs about frequency for ESP32-C2, move frequency of clock sources out of HAL
Closes IDF-5424 and IDF-4332
See merge request espressif/esp-idf!19274
Prior to this commit, adc ulp is disabled by setting
adc_oneshot_unit_init_cfg_t::ulp_mode to false.
After this commit, a new enum `ADC_ULP_MODE_DISABLE` is added. So
setting `ulp_mode` to `ADC_ULP_MODE_DISABLE`, instead of `false`, to
disable the ulp mode.
sizeof(time_t) was previously switched from 4 to 8, ROM functions that use
time_t or dependent types (such as "struct stat") are no longer called due as
they still treat sizeof(time_t) as 4 (see commit
24c20d188e).
However, there is a ROM callpath that was left out. If putchar is the first
stdio print related call, the call path will result in cantwrite() ->
__swsetup_r() -> __smakebuf_r() -> __swhatbuf_r() using the ROM "struct stat"
(where sizeof(time_t)==4).
Instead of removing all printf related ROM newlib functions (which will result
in increased binary size), this commit adds a workaround to setup the stdio
files before any print related calls occur.
This results in cantwrite() always returning false, thus the callpath described
above never being reached.
Closes https://github.com/espressif/esp-idf/issues/9269
ledc_ls_timer_update is required only when CLK_DIV and DUTY_RES bits are changed.
Calling ledc_timer_rst while re-configure PWM frequency through ledc_set_freq can cause glitch in the signal
Internally, disable usb serial jtag DP pin's pullup when calling gpio_ll_pullup_dis and rtcio_ll_pullup_disable
At usb serial jtag setup/install, re-enable DP pin's pullup
Closes https://github.com/espressif/esp-idf/issues/9495
spi_flash driver knows how to write data from cache (DROM or PSRAM)
into flash, so the extra check in nvs_flash is unnecessary.
Besides, the hardcoded address limit (0x3ff00000) is wrong for some
of the newer chips.
Add a check in spi_master driver to prevent using both 'trans->length'
and 'trans->rxlength' on chips other than ESP32 and ESP32S2 which hardware
not support using both TX and RX phases in half-duplex mode
There are two ways to know which transaction descriptor is finished,
by either calling `spi_device_get_trans_result`, or getting it from `post_cb`.
When `SPI_DEVICE_NO_RETURN_RESULT` is set, driver will not push finished
transaction descriptors into the queue. So you can't get it from
`spi_device_get_trans_result`. The only way to know this is via `post_cb`.
update document for function `spi_bus_add_device`
