jingli
d3d1d4e1df
esp32c2/clk_cali: fix rtc slow clk cali logic
2022-08-17 11:17:36 +08:00
jingli
8cd7c30bc7
kconfig: refactor xtal freq kconfig to common configuration item
2022-08-08 13:53:02 +08:00
Song Ruo Jing
842efaf753
Merge branch 'bugfix/rtc_fastmem_lpu_c3_h2' into 'master'
...
sleep: fix wrong register access to set/clear rtc fast mem low power mode on c3 and h2
Closes IDF-5746
See merge request espressif/esp-idf!19361
2022-08-03 19:52:24 +08:00
morris
307d26659e
Merge branch 'bugfix/rmt_hw_issue' into 'master'
...
rmt: only use register to control the IDLE state (hardware issue workaround)
See merge request espressif/esp-idf!19344
2022-08-03 17:01:44 +08:00
songruojing
e8915e14e7
esp_hw_support: fix wrong register access to set/clear rtc fast mem low power mode on c3 and h2
2022-08-03 14:33:13 +08:00
morris
45524408df
coverity: fix uninit variable issue in driver
...
Related CID:
389832, 389838, 389880, 286743, 286752, 395156, 291011, 396001, 396002
2022-08-03 10:46:50 +08:00
morris
031adc01c4
gpio: add test with -O0
2022-08-02 23:07:06 +08:00
Armando
5e6a16380a
esp_adc: move adc common hw related code into esp_hw_support
2022-07-28 03:49:48 +00:00
morris
5e50ec1d66
systimer: add helper functions to convert between tick and us
2022-07-25 16:08:52 +08:00
Guillaume Souchere
0bac33ed41
esp_system: Remove deprecate section from esp_cpu.h
...
- Remove esp_cpu_in_ocd_mode() from esp_cpu.h. Users should call esp_cpu_dbgr_is_attached() instead.
- Remove esp_cpu_get_ccount() from esp_cpu.h. Users should call esp_cpu_get_cycle_count() instead.
- Remove esp_cpu_set_ccount() from esp_cpu.h. Users should call esp_cpu_set_cycle_count() instead.
- Other IDF components updated to call esp_cpu_dbgr_is_attached(), esp_cpu_get_cycle_count() and esp_cpu_set_cycle_count() as well.
2022-07-22 00:06:06 +08:00
Guillaume Souchere
6005cc9163
hal: Deprecate interrupt_controller_hal.h, cpu_hal.h and cpu_ll.h interfaces
...
This commit marks all functions in interrupt_controller_hal.h, cpu_ll.h and cpu_hal.h as deprecated.
Users should use functions from esp_cpu.h instead.
2022-07-22 00:06:06 +08:00
Mahavir Jain
20e21fb29d
Merge branch 'refactor/remove_rom_deps' into 'master'
...
RFC: remove dependency to target-specific ROM headers
Closes IDF-1968
See merge request espressif/esp-idf!18206
2022-07-13 16:44:44 +08:00
Jiang Jiang Jian
b610b47a83
Merge branch 'feature/esp32s3_memprot_additional_improvements' into 'master'
...
[System/Security] Memprot after-merge improvements (v5.0)
Closes IDF-5263 and IDF-5208
See merge request espressif/esp-idf!18893
2022-07-13 15:48:20 +08:00
Jakob Hasse
33a3616635
refactor (bootloader_support, efuse)!: remove target-specific rom includes
...
The following two functions in bootloader_support are private now:
* esp_secure_boot_verify_sbv2_signature_block()
* esp_secure_boot_verify_rsa_signature_block()
They have been moved into private header files
inside bootloader_private/
* Removed bootloader_reset_reason.h and
bootloader_common_get_reset_reason() completely.
Alternative in ROM component is available.
* made esp_efuse.h independent of target-specific rom header
2022-07-13 10:29:02 +08:00
songruojing
ef813b23fa
rtc: esp32c2 support 26MHz xtal in startup code and rtc_clk.c
2022-07-11 12:24:58 +08:00
Martin Vychodil
0c87ae2a91
System/Security: Memprot API unified (ESP32S3)
...
Added missing features and improvements
2022-07-09 22:57:51 +02:00
Ivan Grokhotkov
672e70a023
esp_hw_support: add 26 MHz XTAL option for esp32c2
...
Some esp32c2 boards will be produced with a 26 MHz XTAL. This commit
adds the basic Kconfig option for this type of hardware.
Support for CONFIG_ESP32C2_XTAL_FREQ_26 in other areas of IDF will be
implemented in subsequent commits.
2022-07-08 15:04:17 +08:00
Michael (XIAO Xufeng)
a58362a429
Merge branch 'feature/efuse_rev_major_minor' into 'master'
...
efuse: Adds major and minor versions
See merge request espressif/esp-idf!18255
2022-07-07 11:48:54 +08:00
Song Ruo Jing
b662f4b74f
Merge branch 'feature/support_26M_32M_xtal_bbpll_c2' into 'master'
...
support c2 26M/32M xtal for bbpll
Closes IDF-5485
See merge request espressif/esp-idf!18769
2022-07-06 21:17:52 +08:00
cje
e16165f263
support c2 26M/32M xtal for bbpll
2022-07-05 17:45:03 +08:00
KonstantinKondrashov
0f8ff5aa15
efuse: Adds major and minor versions and others
2022-07-05 14:38:27 +08:00
Martin Vychodil
29c0703d7e
Merge branch 'bugfix/esp32s3_memprot_wrong_check_unicore' into 'master'
...
System/Security: fix missing checks for CPU-count sensitive Memprot APIs (ESP32S3)
Closes IDF-5401
See merge request espressif/esp-idf!18834
2022-07-04 16:41:45 +08:00
Omar Chebib
7e42038c86
Merge branch 'refactor/move_regi2c_headers' into 'master'
...
Refactor: move regi2c_*.h header files from esp_hw_support to soc component
See merge request espressif/esp-idf!18676
2022-07-04 11:32:30 +08:00
Martin Vychodil
ee9aa9a302
System/Security: fix missing checks for CPU-count sensitive Memprot APIs (ESP32S3)
...
Some of the Memory Protection (internal) API functions dealing with per-CPU operations were missing appropriate handling of the CPU count actually configured by CONFIG_FREERTOS_UNICORE. The flaw was fixed across all the places found in the code as the issue was of general type
2022-07-02 20:12:56 +00:00
Cao Sen Miao
a690a87829
spi_flash: Remove legacy spi_flash drivers
2022-07-01 11:01:34 +08:00
Omar Chebib
cd48baf979
Refactor: move regi2c_*.h header files from esp_hw_support to soc component
...
When creating G0 layer, some regi2c_*.h headers were moved out from
esp_hw_support (G1) to soc (G0). In order to be consistent with that change,
move all the remaining regi2c_*.h headers to soc too.
2022-06-30 09:40:44 +00:00
morris
7fd9a91034
dma: move from driver to hw_support
2022-06-28 14:17:12 +08:00
Omar Chebib
8fae0f0753
G0: Support Xtensa targets for G0-only compilation
...
G0-only example now supports Xtensa targets. This means that G0 layer
does not depend on G1+ layers anymore
2022-06-20 11:34:20 +00:00
Martin Vychodil
339fcbf14d
System/Security: Memprot API unified (ESP32S3)
...
Unified Memory protection API for all PMS-aware chips - ESP32S3 port
2022-06-20 02:36:44 +00:00
Omar Chebib
752026a174
Merge branch 'refactor/remove_g0_dep_on_g1_riscv' into 'master'
...
G0: RISC-V targets have now an independent G0 layer
See merge request espressif/esp-idf!17926
2022-06-16 11:53:39 +08:00
Armando (Dou Yiwen)
0b80546f8e
Merge branch 'feature/new_esp_psram_component' into 'master'
...
esp_psram: new esp psram component
Closes IDF-4318, IDF-4382, IDF-4841, and IDFGH-7192
See merge request espressif/esp-idf!18050
2022-06-15 19:16:56 +08:00
Darian
e213e66ba3
Merge branch 'refactor/esp_hw_support_cpu' into 'master'
...
esp_hw_support: Add new esp_cpu.h abstraction
Closes IDF-4769
See merge request espressif/esp-idf!17091
2022-06-14 21:11:30 +08:00
Armando
cdad8a02fe
esp_psram: remove g_spiram_ok
2022-06-14 15:44:27 +08:00
Armando
38e5043ae8
esp_psram: new psram component
2022-06-14 15:44:27 +08:00
Omar Chebib
2fd784c97a
G0 RISC-V: Remove "private_include/regi2c_brownout.h" header as it has been moved and simplify "regi2c_ctrl.h"
2022-06-14 15:00:53 +08:00
Omar Chebib
5bcd9b2db8
G0: RISC-V targets have now an independent G0 layer
...
G0 doesn't depend on any G1+ layer for RISC-V based targets
2022-06-14 15:00:53 +08:00
Darian Leung
61eb7baa6b
esp_hw_support: Add esp_cpu.h abstraction and API
...
This commit updates the esp_cpu.h API. The new API presents a new
abstraction of the CPU where CPU presents the following interfaces:
- CPU Control (to stall/unstall/reset the CPU)
- CPU Registers (to read registers commonly used in SW such as SP, PC)
- CPU Interrupts (to inquire/allocate/control the CPUs 32 interrupts)
- Memory Port (to configure the CPU's memory bus for memory protection)
- Debugging (to configure/control the CPU's debugging port)
Note: Also added FORCE_INLINE_ATTR to the DoxyFile in order to pass doc
builds for esp_cpu.h
2022-06-14 14:30:58 +08:00
Darian Leung
556ec30457
esp_hw_support: Rename cpu_util.c to cpu.c
2022-06-14 14:30:57 +08:00
songruojing
03477a59db
rtc_clk: Fix rtc8m calibration failure after cpu/core reset
...
1. make sure 8md256 clk is enabled before calibration
2. improve bootloader and application startup 8m, 8md256 enable logic
2022-06-13 17:47:51 +08:00
songruojing
c8752cee6a
clk_tree: Refactor rtc_clk.c by adding HAL layer for clock subsystem
2022-06-13 17:47:50 +08:00
Armando
44f771c713
psram: support s3 copy flash to psram
2022-06-10 10:39:29 +08:00
Cao Sen Miao
6589daabb9
MMU: Add configurable mmu page size support on ESP32C2
2022-06-08 19:34:31 +08:00
Michael (XIAO Xufeng)
773715d900
Merge branch 'feature/support_refresh_brownout_v1' into 'master'
...
spi_flash: send reset when brownout detected on XMC flash
Closes IDF-3882
See merge request espressif/esp-idf!16873
2022-06-06 16:27:58 +08:00
Michael (XIAO Xufeng)
d798662421
Merge branch 'bugfix/s3_sleep_voltage' into 'master'
...
esp32s3: fixed dangerous power parameters in sleep modes
See merge request espressif/esp-idf!18168
2022-06-04 00:47:32 +08:00
Cao Sen Miao
6a2d3509dc
spi_flash: Making XMC flash works more stable when brownout detected
2022-06-02 10:38:55 +08:00
chaijie
e624206ca6
modify voltage param to fit all mode of S3
2022-06-01 21:03:54 +08:00
Michael (XIAO Xufeng)
ab69df3ea7
esp32s3: fixed dangerous power parameters in sleep modes
2022-06-01 21:03:54 +08:00
KonstantinKondrashov
ac4c7d99fe
dport: Move DPORT workaround to G0
2022-05-31 13:44:18 +08:00
Anton Maklakov
3c8a1390a0
Merge branch 'bugfix/esp-system-warnings' into 'master'
...
system: minor fixes of warnings
See merge request espressif/esp-idf!18310
2022-05-30 19:33:01 +08:00
Anton Maklakov
afde2434e8
memprot: fix type casting to avoid suspesious address arithmetic
2022-05-30 14:48:12 +07:00