alex/esp-idf
alex/esp-idf
1
0
Fork 0
mirror of https://github.com/espressif/esp-idf.git synced 2024-10-05 20:47:46 -04:00
Code Issues Actions 2 Packages Projects Releases Wiki Activity
31,835 Commits 20 Branches 148 Tags 384 MiB
006c058df5
Commit Graph

375 Commits

Author SHA1 Message Date
Darian Leung
d837836f84
refactor(hal/usb): Rename usb_fsls_phy API to match header/source names 
Note: Also fixed some formatting issues in usb_wrap_struct.h
 2024-02-28 16:09:52 +08:00
Darian Leung
148cc6e75d
refactor(hal/usb): Rename usb_phy files to usb_fsls_phy 
This commit renames USB PHY related HAL files from "usb_phy_xxx" to
"usb_fsls_phy_xxx" since they are only designed to support Full-Speed/Low-Speed
Serial USB PHYs. This renmaing is done to accommodate future USB PHYs that use
other PHY interfaces (e.g., UTMI, ULPI etc).
 2024-02-28 16:09:52 +08:00
Cao Sen Miao
dfff867379 fix(tempertuer_sensor): Fix regs on temperature sensor is not volatile due to GCC bug 2023-12-15 16:41:16 +08:00
Cao Sen Miao
9dd90e2d9b fix(bod): Reset brownout in configuration to avoid RF cannot be enabled again 2023-12-07 10:33:58 +08:00
morris
64e7343e40 Merge branch 'bugfix/fix_adc_read_zero_h2_v5.1' into 'release/v5.1' 
ADC: fix adc raw data get 0 because of signal delay on ESP32H2(v5.1)

See merge request espressif/esp-idf!26976
 2023-11-21 11:08:57 +08:00
Jiang Jiang Jian
0e1ec38785 Merge branch 'bugfix/fix_lightsleep_current_leakage_on_usj_pad_v5.1' into 'release/v5.1' 
fix(esp_hw_support): fix lightsleep current leakage on usb pad (backport v5.1)

See merge request espressif/esp-idf!27205
 2023-11-21 10:51:11 +08:00
morris
ddb6d22468 Merge branch 'feature/gpio_dump_io_info_v5.1' into 'release/v5.1' 
feat(gpio): add a dump API to dump IO configurations (v5.1)

See merge request espressif/esp-idf!26870
 2023-11-17 16:30:22 +08:00
gaoxu
1179d9859f fix(adc): fix h2 adc oneshot read zero and add delay after getting done signal v5.1 2023-11-17 02:16:21 +00:00
wuzhenghui
6ae596c764
fix(esp_hw_support): fix lightsleep current leakage on usb-phy controlled pad 2023-11-16 20:03:30 +08:00
morris
bfeae3857c feat(rmt): support calling rmt_receive in ISR callback 2023-11-15 05:57:45 +00:00
muhaidong
abfd0cbebc change(hal): remove useless code from periph_ll_wifi_bt_module_enable_clk 2023-11-10 11:15:49 +08:00
Song Ruo Jing
4892c481b5 feat(gpio): add a dump API to dump IO configurations 
Merges https://github.com/espressif/esp-idf/pull/12511
 2023-11-03 16:21:31 +08:00
Eduardo Lacerda Campos
9cd0aee51b fix(uart): Fix uart_ll_set_baudrate div-by-zero crash due to uint32_t overflow 
Merges https://github.com/espressif/esp-idf/pull/12179
 2023-09-19 12:12:05 +08:00
Marius Vikhammer
c192ea478e fix(wdt): changed ESP32-C3 WDT to use XTAL as clock 
This clock is unchanged even when CPU/APB frequency changes (e.g. due to esp_pm),
which means timeout period is correct even after such a change.
 2023-09-13 10:45:49 +08:00
morris
f41df5641a Merge branch 'bugfix/gptimer_hal_placement_wrong_condition_v5.1' into 'release/v5.1' 
fix(gptimer): hal function placement under wrong condition (v5.1)

See merge request espressif/esp-idf!25280
 2023-08-23 23:21:20 +08:00
morris
77b74ab091 Merge branch 'bugfix/spi_bus_unify_defualt_mosi_level_v5.1' into 'release/v5.1' 
spi: unify default mosi level on all targets (v5.1)

See merge request espressif/esp-idf!25014
 2023-08-17 10:13:05 +08:00
morris
c113507ad7 feat(gptimer): add gptimer linker.lf to control the placement of driver and hal 
since the linker placement of the hal functions are controlled by the Kconfig in the driver component,
we should create the linker.lf in the driver component, not in the hal component.
 2023-08-14 02:31:16 +00:00
wanlei
bb845e1841 cache: refactor cache_utils into cache_hal instade 2023-07-31 14:52:03 +08:00
wanlei
7a30edc412 fix(all): unify default mosi level to low on all targets 2023-07-26 20:34:25 +08:00
Armando
d21e332281 fix(adc): fixed esp32, esp32s2,esp32s3 adc oneshot mode clk div issue 2023-07-12 17:10:58 +08:00
Cao Sen Miao
f44e8a8a8f brownout: Disable the hardware BOD when BOD interrupt is enabled 2023-07-11 14:32:40 +08:00
Cao Sen Miao
e493a99da2 temperature_sensor: Apply new-shared interface in temperature sensor driver 2023-07-10 11:16:09 +08:00
laokaiyao
13e74d5573 i2s: fixed i2s_ll compiling failure under C++ evironment 
Closes: https://github.com/espressif/esp-idf/issues/11625
 2023-06-26 15:42:36 +08:00
wuzhenghui
ed076c2bc8 bugfix: move adc_oneshot_power_acquire/release to adc_oneshot_read 
Closes https://github.com/espressif/esp-idf/issues/10595
Closes https://github.com/espressif/esp-idf/issues/11386
 2023-05-18 20:08:47 +08:00
morris
f79088f115 Merge branch 'bugfix/add_len_check_per_spi_master_transaction_v5.1' into 'release/v5.1' 
spi master: added transaction length check to refuse longer than hardware supported length (v5.1)

See merge request espressif/esp-idf!23747
 2023-05-18 16:47:18 +08:00
morris
0814386710 Merge branch 'refactor/driver_ut_to_test_app_v5.1' into 'release/v5.1' 
CI: Move all UT in driver to test_app(backport v5.1)

See merge request espressif/esp-idf!23708
 2023-05-18 16:18:26 +08:00
Armando
4943844764 spi: added transaction length check to refuse longer than hardware supported length 2023-05-17 09:03:26 +00:00
Cao Sen Miao
df7a27e36d CI: Move all UT in driver to test_app 2023-05-16 16:42:28 +08:00
morris
aed737b351 Merge branch 'feature/efuse_settings_v5.1' into 'release/v5.1' 
hal: Explicit setting of efuse time settings (v5.1)

See merge request espressif/esp-idf!23725
 2023-05-15 19:16:30 +08:00
morris
78d88afbef Merge branch 'bugfix/i2c_timing_wrong_v5.1' into 'release/v5.1' 
i2c: fix a bug in sda sample timing (backport v5.1)

See merge request espressif/esp-idf!23379
 2023-05-15 10:47:35 +08:00
KonstantinKondrashov
2165ff386e hal: Explicit setting of efuse time settings 
EFUSE_PWR_ON_NUM in C3 has default value = 0x2880, now = 0x3000
 2023-05-12 21:42:38 +08:00
morris
d12ad17373 rmt: check filter and idle threashold 
Closes https://github.com/espressif/esp-idf/issues/11262
 2023-05-05 19:07:59 +08:00
Omar Chebib
6b5b7f09f9 i2c: fix a bug in sda sample timing 
* Closes https://github.com/espressif/esp-idf/issues/9777

This bug prevented SCL line to work properly after a NACK was received in master mode.
 2023-05-04 12:14:43 +08:00
Song Ruo Jing
44915e4251 Merge branch 'bugfix/ledc_channel_update_regression' into 'master' 
ledc: Fix two bugs inside LEDC driver

See merge request espressif/esp-idf!23064
 2023-04-06 20:52:23 +08:00
Song Ruo Jing
5070e51dde ledc: Fix two bugs inside LEDC driver 
1. Regression introduced when refactoring on clock sources selection (0d07f859).
   If channel configuration is called before timer configuration on C6, PWM signal may not be able to output.
2. Missing the improper fade parameter fix inside ledc_set_duty_and_update() function.
 2023-04-06 12:37:33 +08:00
morris
1429913042 gdma: support override default channel priority 2023-04-06 10:49:32 +08:00
KonstantinKondrashov
5b00d1f396 efuse: Update efuses for esp32 esp32c2 esp32c3 esp32s2 esp32s3 2023-04-04 22:32:32 +08:00
jingli
238f31d93b uart: add low level func for uart to set err wr mask 2023-03-09 10:28:33 +08:00
Song Ruo Jing
1a66459b44 usb_serial_jtag: Improve the code for the issue of usb cdc device unable to work during sleep 
1. Remove RTC_CLOCK_BBPLL_POWER_ON_WITH_USB Kconfig option
   During sleep, BBPLL clock always gets disabled
   esp_restart does not disable BBPLL clock, so that first stage bootloader log can be printed
2. Add a new Kconfig option PM_NO_AUTO_LS_ON_USJ_CONNECTED
   When this option is selected, IDF will constantly monitor USB CDC port connection status.
   As long as it gets connected to a HOST, automatic light-sleep will not happen.

Closes https://github.com/espressif/esp-idf/issues/8507
 2023-02-27 12:10:49 +08:00
Armando (Dou Yiwen)
4452a3cf3e Merge branch 'feature/support_h2_adc' into 'master' 
adc: support adc h2

Closes IDF-6124, IDF-6214, IDF-6543, IDF-6215, IDF-6664, and IDF-6695

See merge request espressif/esp-idf!22205
 2023-02-24 14:28:33 +08:00
Marius Vikhammer
c2f9392be5 Merge branch 'feature/h2_wdt' into 'master' 
wdt: add support for H2

Closes IDF-6643 and IDF-6678

See merge request espressif/esp-idf!22422
 2023-02-24 13:48:20 +08:00
Armando
486c765a93 adc: remove adc_hal_conf.h 
Macros inside adc_hal_conf.h are moved to adc_ll.h
 2023-02-23 11:48:31 +08:00
Armando
c2d5c19b28 adc: ll enum renaming 2023-02-23 11:48:31 +08:00
Marius Vikhammer
5d26a0de9a wdt: add support for H2 2023-02-23 11:22:51 +08:00
Alexey Lapshin
36d0e275a0 hal: always inline clk_tree_ll functions 2023-02-22 05:33:03 +00:00
Jing Li
75a82988f1 Merge branch 'refactor/wdt_use_unified_type' into 'master' 
wdt: refactor wdt codes to use unified type

Closes IDF-5653

See merge request espressif/esp-idf!22378
 2023-02-21 09:46:06 +08:00
Armando (Dou Yiwen)
0c635543ff Merge branch 'feature/support_shared_vs_non_shared_mmap' into 'master' 
esp_mm: share and non-share mapping

Closes IDF-6575

See merge request espressif/esp-idf!22320
 2023-02-18 08:02:15 +08:00
Armando
82ee8403b6 mmu: mmu_hal_check_valid_ext_vaddr_region 2023-02-17 13:04:55 +08:00
Laukik Hase
4cf889b692
memprot: Fix incorrect faulting address reported for esp32c3 & esp32s3 
Co-authored-by: Mahavir Jain <mahavir@espressif.com>
 2023-02-16 15:27:11 +05:30
jingli
9c37441b17 wdt: refactor wdt codes to use unified type 2023-02-15 12:08:55 +08:00