| .. |
|
adc_ll.h
|
fix(adc): fix adc read zero after getting done signal on h2
|
2023-10-26 12:22:09 +08:00 |
|
aes_ll.h
|
feat(hal/aes): use RCC atomic block to enable/reset the AES peripheral
|
2024-03-13 15:22:07 +05:30 |
|
apm_ll.h
|
apm: updated APM HAL/LL APIs.
|
2023-10-17 18:20:36 +05:30 |
|
assist_debug_ll.h
|
feat(system): esp32p4: support hw stack guard
|
2024-03-21 14:30:21 +04:00 |
|
brownout_ll.h
|
feat(pmu): set fix voltage to different mode for esp32c6 & c6 modify brownout rst2
|
2024-02-04 14:13:23 +08:00 |
|
cache_ll.h
|
feat(cache): support cache driver on esp32p4
|
2023-09-22 14:19:41 +08:00 |
|
clk_gate_ll.h
|
change(hal): control PAU bus clock by hal layer
|
2024-03-29 00:36:46 +08:00 |
|
clk_tree_ll.h
|
feat(system): gate the debug clock source by default for esp32c6 and esp32h2
|
2024-03-07 19:26:39 +08:00 |
|
cpu_utility_ll.h
|
feat(hal): Adds hal funcs for cpu.c
|
2024-04-11 13:07:04 +03:00 |
|
crosscore_int_ll.h
|
refactor(riscv): added a new API for the interrupts
|
2024-01-18 16:36:53 +08:00 |
|
dedic_gpio_cpu_ll.h
|
fast_gpio: bring up fast gpio driver on esp32c6
|
2022-09-15 11:02:31 +08:00 |
|
ds_ll.h
|
feat(ds): use RCC atomic block to enable/reset the DS peripheral
|
2023-10-11 14:59:04 +05:30 |
|
ecc_ll.h
|
feat(ecc): use RCC atomic block to enable/reset the ECC peripheral
|
2023-10-11 14:59:04 +05:30 |
|
efuse_hal.h
|
esp32c6: add hal support
|
2022-09-01 12:37:51 +08:00 |
|
efuse_ll.h
|
feat(pmu): set fix voltage to different mode for esp32c6 & c6 modify brownout rst2
|
2024-02-04 14:13:23 +08:00 |
|
etm_ll.h
|
feat(ulp): add api to get lp_cpu wakeup cause and clear wakeup source at startup
|
2023-12-18 11:29:53 +08:00 |
|
gdma_ll.h
|
feat(dma): advanced dma malloc helper
|
2024-04-02 14:30:14 +08:00 |
|
gpio_etm_ll.h
|
fix(gpio_etm): allow one GPIO binds to multiple ETM tasks
|
2024-04-23 20:37:34 +08:00 |
|
gpio_glitch_filter_ll.h
|
filter: workaround a hw issue in the glitch filter
|
2023-03-29 13:28:07 +08:00 |
|
gpio_ll.h
|
feat(gpio): add gpio support on ESP32C5
|
2024-02-20 14:57:25 +08:00 |
|
gpspi_flash_ll.h
|
fix(ll): fix cpp compile error
|
2023-09-14 14:48:12 +08:00 |
|
hmac_ll.h
|
feat(hmac): use RCC atomic block to enable/reset the HMAC peripheral
|
2023-10-11 14:59:04 +05:30 |
|
i2c_ll.h
|
feat(i2c_master): Add lp_i2c support in i2c master driver
|
2024-04-03 11:39:04 +08:00 |
|
i2s_ll.h
|
refactor(apll): move the apll soc caps to clk_tree_ll
|
2023-09-28 15:03:27 +08:00 |
|
ieee802154_ll.h
|
fix(ieee802154): fix the issue of not receiving packets when RSSI is positive in esp32h2
|
2024-01-03 14:39:31 +08:00 |
|
ledc_ll.h
|
feat(ledc): support ledc on esp32p4
|
2023-10-17 16:40:04 +08:00 |
|
lp_aon_hal.h
|
feat(esp_hw_support): add esp32p4 sleep initial support
|
2024-03-10 10:51:28 +08:00 |
|
lp_aon_ll.h
|
change(rtc): rename sleep mode related regs defination
|
2024-03-28 17:49:14 +08:00 |
|
lp_clkrst_ll.h
|
feat(system): disable RNG module clock by default for save power
|
2024-03-12 10:10:41 +08:00 |
|
lp_core_ll.h
|
feat(ulp): support interrupts for C6/P4 LP core
|
2024-04-28 17:03:23 +08:00 |
|
lp_timer_ll.h
|
refactor(rtc): move soc/rtc.h from soc to esp_hw_support component
|
2024-01-25 19:15:33 +08:00 |
|
lpwdt_ll.h
|
feat(lp_wdt): add lp wdt HAL support on C6, H2 and P4
|
2023-09-06 11:39:27 +08:00 |
|
mcpwm_ll.h
|
fix(mcpwm): enable mcpwm group clock before hal init
|
2024-01-15 18:13:56 +08:00 |
|
mmu_ll.h
|
change(soc): added SOC_ prefix to mmu defs
|
2023-09-05 15:47:26 +08:00 |
|
modem_lpcon_ll.h
|
modem clock: gatable clock interface which can gate or ungate modem clock domain
|
2023-07-13 20:44:56 +08:00 |
|
modem_syscon_ll.h
|
bringup esp32c5beta3 modem clock
|
2024-03-26 19:54:32 +08:00 |
|
mpi_ll.h
|
feat(mpi): use RCC atomic block to enable/reset the MPI peripheral
|
2023-10-11 14:59:03 +05:30 |
|
mwdt_ll.h
|
refactor(esp_hw_support): move TIMG_WDT_WKEY_VALUE defination from hal to soc
|
2024-01-23 11:51:44 +08:00 |
|
parlio_ll.h
|
feat(parlio_rx): add parlio rx examples
|
2023-12-28 11:05:26 +08:00 |
|
pau_ll.h
|
change(hal): control PAU bus clock by hal layer
|
2024-03-29 00:36:46 +08:00 |
|
pcnt_ll.h
|
feat(pcnt): replace periph_module func with new ll func
|
2023-09-20 15:06:04 +08:00 |
|
pmu_hal.h
|
pmu: add hal layer codes for esp32c6
|
2023-01-31 22:12:27 +08:00 |
|
pmu_ll.h
|
feat(ulp): support interrupts for C6/P4 LP core
|
2024-04-28 17:03:23 +08:00 |
|
regi2c_ctrl_ll.h
|
hal: Fix missing definition for "bool" type
|
2023-03-16 01:50:22 +08:00 |
|
rmt_ll.h
|
feat(rmt): support sleep retention
|
2024-04-24 22:10:42 +08:00 |
|
rtc_io_ll.h
|
feat(ulp): support interrupts for C6/P4 LP core
|
2024-04-28 17:03:23 +08:00 |
|
rwdt_ll.h
|
wdt: refactor wdt codes to use unified type
|
2023-02-15 12:08:55 +08:00 |
|
sar_ctrl_ll.h
|
bugfix: move adc_oneshot_power_acquire/release to adc_oneshot_read
|
2023-05-18 10:29:50 +08:00 |
|
sdio_slave_ll.h
|
feat(sdio_slave): add reset and clock control functions
|
2024-03-29 10:41:17 +08:00 |
|
sdm_ll.h
|
sdm: correct concept duty to density
|
2023-01-06 17:01:48 +08:00 |
|
sha_ll.h
|
feat(hal/sha): use RCC atomic block to enable/reset the SHA peripheral
|
2024-03-27 11:23:30 +05:30 |
|
spi_flash_encrypted_ll.h
|
fix(flash_encryption): Fix the issue that XTS_AES Plain text memory size wrong
|
2023-10-26 19:38:42 +08:00 |
|
spi_flash_ll.h
|
refactor(spi_flash): Use new spi_flash register sturct and deperecate the old one
|
2024-01-08 09:59:22 +08:00 |
|
spi_ll.h
|
refactor(spi_slave): replace dma_ll in slave hal layer (part 2.2)
|
2024-04-24 14:01:09 +08:00 |
|
spimem_flash_ll.h
|
refactor(spi_flash): Use new spi_flash register sturct and deperecate the old one
|
2024-01-08 09:59:22 +08:00 |
|
systimer_ll.h
|
feat(systimer): support ETM on esp32p4
|
2023-12-07 18:46:24 +08:00 |
|
temperature_sensor_ll.h
|
feat(temperature_sensor): Add new support for temperature sensor ETM on ESP32C6/H2
|
2024-03-01 18:52:39 +08:00 |
|
timer_ll.h
|
change(gptimer): use private unsafe RCC LL functions in bootloader
|
2024-04-08 17:48:20 +08:00 |
|
twai_ll.h
|
feat(twai): support legacy twai(can) driver for esp32p4
|
2023-10-26 16:20:45 +08:00 |
|
uart_ll.h
|
fix(uart): Fix mismatch wakeup rising edges required with the threshold configured
|
2024-03-15 16:58:33 +08:00 |
|
usb_serial_jtag_ll.h
|
feature(usb_serial_jtag): add usb serial jtag support for esp32p4
|
2024-05-11 14:16:57 +08:00 |
