Commit Graph

146 Commits

Author SHA1 Message Date
jingli
0ea1825f64 reduce bootup time when using usb-serial-jtag 2021-11-29 17:21:11 +08:00
wuzhenghui
388615add0 update esp32h2beta2 chip_id to 14 2021-11-24 12:30:43 +08:00
wuzhenghui
968c42d88c 822 FPGA rnv init 2021-11-24 12:30:17 +08:00
morris
207891ef6c clk: fix esp32h2 print wrong CPU frequency 2021-11-15 17:40:51 +08:00
Cao Sen Miao
ce1ee3d8ae psram: add ESP32-D0WD-R2-V3 support 2021-11-12 13:52:24 +08:00
morris
16677b0d3c global: make periph enable/disable APIs private
peripheral enable/disable usually should be managed by driver itself,
so make it as espressif private APIs, not recommended for user to use it
in application code.
However, if user want to re-write the driver or ports to other platform,
this is still possible by including the header in this way:
"esp_private/peripheral_ctrl.h"
2021-11-08 10:37:47 +08:00
Cao Sen Miao
3934e24d22 ESP8684: add spi_flash, efuse, hw_support support 2021-11-06 17:33:44 +08:00
Armando
c331c85318 mspi: make cpu clock source switch safe
For some of the MSPI high frequency setting (e.g. 80M DDR mode Flash or PSRAM), timing tuning is required.
Certain delays will be added to the MSPI RX direction. When system clock switches down, the delays should be
cleared. When system clock switches up, the delays should be restored.
2021-10-19 21:47:27 +08:00
wuzhenghui
5000aa877f fix rtc_clk_cal: Wait for timeout in a loop instead of just judge once 2021-10-19 12:07:34 +08:00
wuzhenghui
ab9df9945f fix stuck in rtc_clk_cal 2021-10-14 16:25:54 +08:00
Li Shuai
73829221f5 esp_hw_support: force power down wifi and bt power domain when rtc module init 2021-10-14 10:51:10 +08:00
Armando
16a91399f1 psram: put opiram_psram and spiram_psram in internal ram
External memory is accessed via SPI0. When modifying the SPI0 registers,
should put the code in internal RAM. Otherwise when there is an ongoing
SPI0 transaction, CPU changes the SPI0 registers. This is dangerous.
Besides, modifying SPI0 registers may lead external memory to an
unstable state. Therefore putting these code in internal RAM is
necessary.
2021-10-08 17:39:41 +08:00
Armando
7ff9332243 rtc: fix mspi timing issue when self-calibrate ocode
When doing OCode self-calibration in rtc_init.c, it will change the
system clock from PLL to XTAL, which is in a lower frequency, and MSPI
timing tuning is not needed. Therefore we should modify the timing
configurations accordingly, and set it back after the calibration.

This is a temporary fix
2021-10-08 15:59:57 +08:00
Armando
4cafdbd83b mspi: fix psram cs timing register setting not in iram bug 2021-10-08 15:59:57 +08:00
Armando
2655a506c9 mspi: support auto detect octal flash vendor 2021-10-08 15:59:57 +08:00
Martin Vychodil
5344de34c3 System/Memprot: fixed voltage glitching detection logic
When the application is being debugged it should check the call result (esp_cpu_in_ocd_debug_mode())
is not given volt.glitch attack - so the result is triple-checked by ESP_FAULT_ASSERT macro. In case
the check fails, the system is reset immediately

IDF-4014
2021-10-04 09:21:07 +02:00
Jiang Jiang Jian
f5ae8b0533 Merge branch 'feature/ledc_use_rtc8m_or_xtal_lightsleep' into 'master'
support RTC8M and XTAL power domain in light sleep mode

Closes IDF-3419

See merge request espressif/esp-idf!15152
2021-09-27 04:02:29 +00:00
Jiang Jiang Jian
a015123a1d Merge branch 'feature/rename_apbctrl_to_syscon' into 'master'
rename apbctrl to syscon

See merge request espressif/esp-idf!14524
2021-09-16 12:58:07 +00:00
Wu Zheng Hui
1080e4f6a2 rename APB_CTRL ro SYS_CON
save
2021-09-16 20:57:57 +08:00
Armando (Dou Yiwen)
b9ea273e78 Merge branch 'feature/suppport_self_icode_calibration_on_s3' into 'master'
adc: support self calibration icode on s3

Closes IDF-3913

See merge request espressif/esp-idf!15195
2021-09-16 11:14:58 +00:00
Armando
ddd0235783 adc: support adc self-calibration on esp32s3 2021-09-16 15:17:29 +08:00
Li Shuai
b3e27403f3 esp_hw_support: keep external 40 MHz xtal related analog circuit power on during sleep 2021-09-16 14:46:21 +08:00
Li Shuai
58292a7d22 Power Management: add XTAL power domain to control whether external 40MHz xtal is powered down during sleep 2021-09-16 14:43:43 +08:00
Li Shuai
f5b39a7cde esp_hw_support: No voltage drop during light sleep to ensure stable output clock of rtc8m oscillator 2021-09-16 14:40:46 +08:00
Li Shuai
b59902f4d1 Merge branch 'bugfix/esp32s3_lightsleep_psram_leakage_current' into 'master'
fix SPIRAM leakage when its CS pin has no hardware pullup

See merge request espressif/esp-idf!14730
2021-09-16 04:07:58 +00:00
Armando
ea10dacf68 mspi: add octal psram get_cs_io function 2021-09-15 20:34:18 +08:00
chenjianqiang
9b53e18c44 add flash and PSRAM CS IO acquire function 2021-09-15 20:34:17 +08:00
Armando
c45c6f52f1 adc: support adc efuse-based calibration on esp32s3 2021-09-14 11:42:50 +08:00
Li Shuai
e44ead5356 Power Management: add RTC8M power domain to control whether internal 8m oscillator is powered down during sleep 2021-09-13 17:36:54 +08:00
Sachin Parekh
0e6b03f343 esp32s2/hmac: Release HMAC lock in downstream mode incase of failure 2021-09-06 11:21:39 +05:30
Sachin Parekh
fd5a7df404 esp32h2: Replicated HMAC JTAG downstream enable mode implementation 2021-09-06 11:06:50 +05:30
Sachin Parekh
fa2707f1f3 hmac: Added Downstream JTAG enable mode for esp32c3 and esp32s3
If JTAG is disabled temporarily by burning SOFT_DIS_JTAG, it can be
re-enabled temporarily through esp_hmac_jtag_enable API
2021-09-06 11:06:50 +05:30
Sachin Billore
f80d6f8c21 Digital Signature support for S3
Closes IDF-1791
2021-09-02 11:59:24 +05:30
Marius Vikhammer
bdf3a8ff29 Merge branch 'feature/xtwdt' into 'master'
WDT: Add support for XTAL32K Watchdog timer

Closes IDF-2575

See merge request espressif/esp-idf!15000
2021-09-02 02:44:47 +00:00
Marius Vikhammer
4869b3cd4a WDT: Add support for XTAL32K Watchdog timer 2021-09-02 09:09:00 +08:00
Armando (Dou Yiwen)
5f38b766a8 Merge branch 'feature/support_120mhz_quad_psram_quad_flash' into 'master'
mspi: support 120MHz clock freq on QSPI flash/psram on ESP32-S3

Closes IDF-3711

See merge request espressif/esp-idf!14849
2021-09-01 02:46:05 +00:00
Armando
a3dc625da6 mspi: support 120MHz Quad Flash and PSRAM on ESP32S3 2021-08-31 16:06:44 +08:00
Marius Vikhammer
2e0cab6f94 himem: reverse error check logic in himem 2021-08-31 08:46:27 +08:00
SalimTerryLi
55a5c444b5
rtc_io, esp_himem: replace XXX_CHECK with ESP_RETURN_ON_FALSE 2021-08-30 11:18:34 +08:00
Martin Vychodil
58aed7df98 ESP32S2: No assert()/abort() in Memprot API, use esp_err_t instead
JIRA IDF-3634
2021-08-26 09:20:00 +02:00
Shu Chen
f8f9e545e8 Merge branch 'feature/support_esp32h2_hw_support' into 'master'
Feature/support esp32h2 hw support

Closes IDF-3378 and IDF-3396

See merge request espressif/esp-idf!14545
2021-08-26 06:00:27 +00:00
sly
11dfd802e0 esp32h2: add rtc clock support 2021-08-26 11:25:39 +08:00
morris
a861575d05 Merge branch 'bugfix/fix_esp32c3_auto_adjust_volt' into 'master'
system: fix esp32c3 auto adjust voltage bug

See merge request espressif/esp-idf!14725
2021-08-26 02:53:22 +00:00
sly
b342b49823 fix esp32c3 auto adjust voltage bug 2021-08-25 17:08:26 +08:00
Wu Zheng Hui
3128a2544b Adjust the variable name &
Add mapping support for different sizes of spi ram
2021-08-25 16:06:28 +08:00
wuzhenghui
6ab495b4dc esp32h2: chip env support
brownout init fixed
2021-08-25 11:02:47 +08:00
Marius Vikhammer
53975c444c Merge branch 'update_copyright_notice_esp_hw_support_5' into 'master'
esp_hw_support: update copyright notice 5

See merge request espressif/esp-idf!14729
2021-08-13 08:40:47 +00:00
Marius Vikhammer
465830312b Merge branch 'update_copyright_notice_esp_hw_support_4' into 'master'
esp_hw_support: update copyright notice 4

See merge request espressif/esp-idf!14728
2021-08-13 08:40:15 +00:00
Jakob Hasse
1c3be690ed [esp_hw_support]: HMAC upstream support for S3 2021-08-13 12:01:06 +08:00
Jan Brudný
5195b6a237 esp_hw_support: update copyright notice 5 2021-08-10 13:32:08 +02:00