alex/esp-idf
alex/esp-idf
1
0
Fork 0
mirror of https://github.com/espressif/esp-idf.git synced 2024-10-05 20:47:46 -04:00
Code Issues Actions 2 Packages Projects Releases Wiki Activity
31,937 Commits 20 Branches 148 Tags 384 MiB
f93025b7f9
Commit Graph

248 Commits

Author SHA1 Message Date
Jiang Jiang Jian
f87ee9c4ec Merge branch 'bugfix/fix_c6_wakeup_access_flash_v5.1' into 'release/v5.1' 
fix(hal): fix esp32c6 clock bug workaround access flash in wakeup process (v5.1)

See merge request espressif/esp-idf!29245
 2024-03-05 10:58:14 +08:00
Darian Leung
d837836f84
refactor(hal/usb): Rename usb_fsls_phy API to match header/source names 
Note: Also fixed some formatting issues in usb_wrap_struct.h
 2024-02-28 16:09:52 +08:00
Darian Leung
148cc6e75d
refactor(hal/usb): Rename usb_phy files to usb_fsls_phy 
This commit renames USB PHY related HAL files from "usb_phy_xxx" to
"usb_fsls_phy_xxx" since they are only designed to support Full-Speed/Low-Speed
Serial USB PHYs. This renmaing is done to accommodate future USB PHYs that use
other PHY interfaces (e.g., UTMI, ULPI etc).
 2024-02-28 16:09:52 +08:00
wuzhenghui
12dca8d086
fix(hal): fix esp32c6 clock bug workaround access flash in wakeup process 2024-02-26 11:42:38 +08:00
hongshuqing
80378b809e feat(pmu): set fix voltage to different mode for esp32c6 2024-02-22 15:01:14 +08:00
Lou Tianhao
1e43abfb57 change(pm): put pmu_hal to iram 2024-01-16 14:01:22 +08:00
xiaqilin
a9679450b2 fix(ieee802154): fix the issue of not receiving packets when RSSI is positive in esp32h2 2024-01-04 15:09:42 +08:00
Jiang Jiang Jian
6e57f35873 Merge branch 'backport/add_dynamic_iram_check_for_ot_sleep_v51' into 'release/v5.1' 
fix(pm): fix extra retention function to iram(Backportv5.1)

See merge request espressif/esp-idf!28134
 2023-12-29 12:26:04 +08:00
wuzhenghui
53afab3850
feat(ulp): add api to get lp_cpu wakeup cause and clear wakeup source at startup 
Closes https://github.com/espressif/esp-idf/issues/12651
 2023-12-28 13:31:55 +08:00
zwx
81123259ff fix(pm): fix extra retention function to iram 
* Also remove unused function on H2
 2023-12-26 19:20:44 +08:00
Cao Sen Miao
dfff867379 fix(tempertuer_sensor): Fix regs on temperature sensor is not volatile due to GCC bug 2023-12-15 16:41:16 +08:00
morris
1b78d57496 Merge branch 'bugfix/bod_reset_c6_h2_v5.1' into 'release/v5.1' 
fix(bod): Reset brownout in configuration to avoid RF cannot be enabled again(backport v5.1)

See merge request espressif/esp-idf!27723
 2023-12-14 11:05:55 +08:00
wuzhenghui
4a7d9dd387
fix(esp_hw_support): re-initialize icg map in modem_clock_module_enable 2023-12-08 14:22:36 +08:00
morris
5e29bd5370 Merge branch 'bugfix/fix_adc_continuous_do_not_rst_apb_clk_v5.1' into 'release/v5.1' 
fix(adc): fix adc continuous get less results beacuse do not reset apb clk (v5.1)

See merge request espressif/esp-idf!27604
 2023-12-07 21:27:05 +08:00
Lou Tianhao
c1782faf0f fix(pm/ext1): fix c6 h2 lp_aon_ll_ext1_set_wakeup_pins func 2023-12-07 03:52:22 +00:00
Cao Sen Miao
9dd90e2d9b fix(bod): Reset brownout in configuration to avoid RF cannot be enabled again 2023-12-07 10:33:58 +08:00
gaoxu
57a5c4684c fix(adc): fix adc continuous get less results beacuse do not reset apb clk 2023-12-06 10:19:45 +00:00
Shu Chen
ecbbd3c3d9 Merge branch 'backport/add_ot_radio_stats_enable_config_5_1' into 'release/v5.1' 
feat(openthread): backport some openthread features(BackportV5.1)

See merge request espressif/esp-idf!26885
 2023-11-22 12:23:53 +08:00
morris
64e7343e40 Merge branch 'bugfix/fix_adc_read_zero_h2_v5.1' into 'release/v5.1' 
ADC: fix adc raw data get 0 because of signal delay on ESP32H2(v5.1)

See merge request espressif/esp-idf!26976
 2023-11-21 11:08:57 +08:00
Jiang Jiang Jian
e718b603e4 Merge branch 'bugfix/clear_ulp_wake_intr_in_wake_source_enable_v5.1' into 'release/v5.1' 
fix(esp_hw_support): clear all type ULP wakeup intr status at ulp wakeup source enable (backport v5.1)

See merge request espressif/esp-idf!27188
 2023-11-21 10:52:54 +08:00
Jiang Jiang Jian
0e1ec38785 Merge branch 'bugfix/fix_lightsleep_current_leakage_on_usj_pad_v5.1' into 'release/v5.1' 
fix(esp_hw_support): fix lightsleep current leakage on usb pad (backport v5.1)

See merge request espressif/esp-idf!27205
 2023-11-21 10:51:11 +08:00
morris
ddb6d22468 Merge branch 'feature/gpio_dump_io_info_v5.1' into 'release/v5.1' 
feat(gpio): add a dump API to dump IO configurations (v5.1)

See merge request espressif/esp-idf!26870
 2023-11-17 16:30:22 +08:00
morris
ceb0aec0cc Merge branch 'bugfix/rmt_stop_issue_v5.1' into 'release/v5.1' 
fix(rmt): a disabled channel may pick up a pending transaction (v5.1)

See merge request espressif/esp-idf!26779
 2023-11-17 16:27:21 +08:00
gaoxu
1179d9859f fix(adc): fix h2 adc oneshot read zero and add delay after getting done signal v5.1 2023-11-17 02:16:21 +00:00
wuzhenghui
6ae596c764
fix(esp_hw_support): fix lightsleep current leakage on usb-phy controlled pad 2023-11-16 20:03:30 +08:00
wuzhenghui
61bb3fb67f fix(esp_hw_support): clear all type ULP wakeup intr status at ulp wakeup source enable 2023-11-16 11:49:40 +08:00
morris
bfeae3857c feat(rmt): support calling rmt_receive in ISR callback 2023-11-15 05:57:45 +00:00
Chen Jichang
0ce2683d81 feature(MCPWM): Add MCPWM trigger driver and test 
Each MCPWM operator has two Trigger (named T0 and T1), and they can be
routed to GPIO fault signal or timer sync event.Generator can be set up
to perform different action on Trigger event.
This commit add a trigger driver and a test for the driver.
 2023-11-15 05:57:37 +00:00
Song Ruo Jing
4892c481b5 feat(gpio): add a dump API to dump IO configurations 
Merges https://github.com/espressif/esp-idf/pull/12511
 2023-11-03 16:21:31 +08:00
Lou Tianhao
9b3e40c9d1 feat(pm/deepsleep): Support EXT1_WAKEUP_MODE_PER_PIN 2023-11-03 11:02:56 +08:00
morris
9b4a42e728 feat(mcpwm): support update timer period dynamically 
Implement the requirement asked in
https://www.esp32.com/viewtopic.php?f=13&t=35919
 2023-10-24 10:11:47 +08:00
Michael (XIAO Xufeng)
c1c843f5e2 Merge branch 'bugfix/fix_adc_sar_set_power_mode_no_effect_v5.1' into 'release/v5.1' 
ADC: Fixed wrong ADC reading issue caused by ADC and WiFi power conflict on ESP32C6(backport v5.1)

See merge request espressif/esp-idf!26235
 2023-10-12 15:18:18 +08:00
wuzhenghui
49013a0560 feat(modem_clock): separate management of modem_adc_common_fe clock and modem_private_fe 2023-09-28 16:24:39 +00:00
gaoxu
b183b88463 fix(adc): power settings not taking into effect on C6 2023-09-28 16:24:39 +00:00
morris
e5c8434c6e fix(parlio_tx): fix wrong dma descriptor setup 2023-09-27 14:53:53 +08:00
Eduardo Lacerda Campos
9cd0aee51b fix(uart): Fix uart_ll_set_baudrate div-by-zero crash due to uint32_t overflow 
Merges https://github.com/espressif/esp-idf/pull/12179
 2023-09-19 12:12:05 +08:00
Marius Vikhammer
41a291fee0 fix(wdt): changed WDT clock source to XTAL for C6/H2 
Previously it used PLL, but PLL could potentially be powered down by power-management
when CPU frequency changed.
 2023-09-13 10:45:51 +08:00
morris
5baf0197f0 Merge branch 'feature/modify_mcpwm_clock_pre_scale_v5.1' into 'release/v5.1' 
feat(mcpwm): Make the MCPWM capture timer's resolution configurable (v5.1)

See merge request espressif/esp-idf!25904
 2023-09-12 11:30:39 +08:00
Chen Jichang
d8e5b2ac41 feat(mcpwm): Set group clock prescale dynamically 
MCPWM group clock pre scale was originally fixed to 2, which is
inconvenient. Set group clock prescale dynamically. Now the maximum
resolution of the MCPWM timer is up to 160MHz(when the prescale set
to 1). And add a resulotion config for MCPWM capture.
 2023-09-11 11:29:28 +08:00
Marius Vikhammer
0a6d6c085a feat(wdt): add LL functions for WDT on H2 2023-09-08 11:01:25 +08:00
morris
2a80451b24 Merge branch 'feature/add_mcpwm_carrier_clk_source_v5.1' into 'release/v5.1' 
feat(MCPWM): Add mcpwm carrier clk source(v5.1)

See merge request espressif/esp-idf!25572
 2023-08-28 11:11:04 +08:00
Jiang Jiang Jian
5a25786a8a Merge branch 'bugfix/lp_i2c_bugfixes_v5.1' into 'release/v5.1' 
Fixed multiple LP I2C bugs (v5.1)

See merge request espressif/esp-idf!25277
 2023-08-28 10:20:40 +08:00
Chen Jichang
c240a1f46b feat(MCPWM): Add mcpwm carrier clk source 
The MCPWM carrier is part of the operator and can work independently
without the MCPWM timer being enabled. This commit add the MCPWM
carrier clk source.
 2023-08-25 17:34:58 +08:00
morris
f41df5641a Merge branch 'bugfix/gptimer_hal_placement_wrong_condition_v5.1' into 'release/v5.1' 
fix(gptimer): hal function placement under wrong condition (v5.1)

See merge request espressif/esp-idf!25280
 2023-08-23 23:21:20 +08:00
Jiang Jiang Jian
b638cb3335 Merge branch 'bringup/esp32h2_deep_sleep_for_rebase_v5.1' into 'release/v5.1' 
esp32h2: support deep_sleep(backport v5.1)

See merge request espressif/esp-idf!24962
 2023-08-23 20:12:01 +08:00
Laukik Hase
a0da805f2b
fix(hal): Fix the external memory vaddr region validity check 
- For c6 and h2, the vaddr end calculated was off by 1
  byte.
 2023-08-22 15:24:02 +05:30
morris
77b74ab091 Merge branch 'bugfix/spi_bus_unify_defualt_mosi_level_v5.1' into 'release/v5.1' 
spi: unify default mosi level on all targets (v5.1)

See merge request espressif/esp-idf!25014
 2023-08-17 10:13:05 +08:00
morris
c113507ad7 feat(gptimer): add gptimer linker.lf to control the placement of driver and hal 
since the linker placement of the hal functions are controlled by the Kconfig in the driver component,
we should create the linker.lf in the driver component, not in the hal component.
 2023-08-14 02:31:16 +00:00
Sudeep Mohanty
6b1292284e fix(lp_i2c): Fixed a bug where the LP_I2C did not send NACK for 16-byte reads 
This commit updates the LP_I2C driver used by the LP CPU wherein the
driver did not send out a NACK when we do a read of multiple of the FIFO
depth bytes. This was because the LP I2C controller was configured to
send an ACK when the Rx FIFO reaches the threshold instead of a NACK.
This commit updates the behavior.
 2023-08-11 14:43:15 +00:00
Lou Tianhao
badef66538 change(pm/deepsleep): rewrite the option all low as any low for esp32s2, esp32s3, esp32c6 and esp32h2 2023-08-03 16:46:55 +08:00