In previous transmission(s), the TX_DONE interrupt raw bit may be raised, but never been cleared.
TX_DONE interrrupt status bit should be cleared before enabling it to check the new transmission.
Introduced in 4e09d147b11ed8a094b5858642c9f60d658ef656
if using this flag, driver willn't return the trans-done descriptor from ISR, so
`spi_slave_get_trans_result()` shouldn't be called.
besides, callback is the only way to know transaction status in that case, so a
`post_trans_cb` will be checked mandatory.
esp-wifi: Restores station status to connected when no other AP is found for roam
Closes WIFI-4785
See merge request espressif/esp-idf!20120
\[WiFi\]Fixed the bug that station connected to an AP already connected caused subsequent scan fail.
Unlike COMPILE_OPTIONS, COMPILE_DEFINITIONS CMake property assumes
values without the -D prefix, such as NAME or NAME=VAL.
Previously, IDF build system was passing COMPILE_DEFINITIONS build
property to CMake COMPILE_OPTIONS property, so -D prefix was not
a problem.
Now that COMPILE_DEFINITIONS CMake property is used, -D prefix has
to be removed.
(Note that this doesn't affect 'target_compile_definitions' function,
which strips -D prefix before adding the definition to the property.)
Now that the supported CMake version is >=3.16, this code can be
simplified.
The code to deduplicate the directories can be removed since this is
handled by target_link_directories.
This commit adds a priority scheduling unit test to test that the scheduler
always schedules the highest priority ready state task. Single core and SMP
variants of the test are both added.
This commit adds a README.md containing guidelines on how to refactor the
FreeRTOS unit tests for upstreaming. A portTestMacro.h header was also added
which contains port implementation specific macros used by the test cases.
Fixed BLE disconnection issue when channel map instant passed due to bad channels
Closes BT-2764, BT-2730, and BT-2649
See merge request espressif/esp-idf!20189
This commit places some functions in port.c and port_common.c into flash by
default. These functions are mostly called once during startup, thus shouldn't
affect applications much when placed into flash instead of the default IRAM.
This commit synchronizes multiple functions in tasks.c with upstream v10.4.3
that contain minor differences.
The following functions have had their parameter names or code formatting
updated:
- xTaskCreateStaticPinnedToCore()
- xTaskCreatePinnedToCore()
- prvInitialiseNewTask()
- prvTaskIsTaskSuspended()
- vTaskStartScheduler()
- xTaskResumeAll()
- xTaskCheckForTimeOut()
- uxTaskResetEventItemValue()
The following functions have had their missing "xAlreadyYielded" restored
- xTaskDelayUntil()
- vTaskDelay()
The following functions have had their critical section/interrupt disdable
usage update
- vTaskSuspendAll()
- xTaskGetTickCountFromISR()
- xTaskGetApplicationTaskTagFromISR()
This commit synchronizes multiple functions that contain major differences with
upstream v10.4.3. Multi-core modifications are then reapplied to the function.
Vanilla code uses "pxTCB == pxCurrentTCB" to check whether a task is currently
running. This commit adds the following macros instead.
- taskIS_CURRENTLY_RUNNING()
- taskIS_CURRENTLY_RUNNING_ON_CORE()
The following functions have been updated to use those macros instead.
- eTaskGetState()
- vTaskPrioritySet()
- vTaskResume()
The following functions have been synchronized with upstream v10.4.3.
Multi-core modifications are then reapplied.
- vTaskSuspend()
- vTaskDelete()
- prvGetExpectedIdleTime()
This commit synchronizes multiple functions in queue.c with upstream v10.4.3.
Multi-core modifications are then reapplied to these functions. The following
functions were modified:
prvNotifyQueueSetContainer()
xQueueGenericCreateStatic()
xQueueGenericCreate()
xQueueGetMutexHolder()
xQueueCreateCountingSemaphoreStatic()
xQueueCreateCountingSemaphore()
xQueueGenericSend()
xQueueGenericSendFromISR()
xQueueReceiveFromISR()
uxQueueMessagesWaiting()
prvUnlockQueue()
prvIsQueueFull()
xQueueAddToSet()
xQueueRemoveFromSet()
prvNotifyQueueSetContainer()
Note: The SEGGER_SYSVIEW traceQUEUE_SEND() macro was updated as the
xCopyPosition argument is no longer available in scenarios where the
macro is called.
For project with reduced component list, secure boot signing key
path was not getting correctly. This change sets the secure boot
signing key path explicitly based on the relevant config option.
Closes https://github.com/espressif/esp-idf/issues/9578
Close IDFGH-8075
Bugfix/fix send eapol key request frame when wpa group handshake issue
Closes ESPCS-842, IDFGH-6592, and IDFGH-5563
See merge request espressif/esp-idf!19905
This commit fixes the function declaration naming from esprv_intc_set_threshold()
to esprv_intc_int_set_threshold(), thus allowing the underlying ROM funciton to be
exposed via the header.
This commit removes the riscv_interrupts.h header is it has become redundant. The previously
exposed API has been handled as follows:
- "riscv_interrupt_enable()" and "riscv_interrupt_disable()" have been removed. These functions
were declarations only and never had any implementation.
- "riscv_global_interrupts_enable()" and "riscv_global_interrupts_disable()" renamed to
"rv_utils_intr_global_enable()" and "rv_utils_intr_global_disable()" respectively and now
placed in rv_utils.h
Following the file renaming to use the "usb_dwc" prefix, this commit
updates the symbol names of those files to use the "usb_dwc" as well.
Some LL functions were also renamed so that the register name is
mentioned.
This commit updates the DWC_OTG based struct/ll/hal file names to
use the prefix "usb_dwc". This naming scheme reduces ambiguity if
another USB controller implementation is added.
As a result, "hcd.c" has been renamed to "hcd_dwc.c"
ESP32-C2 has a single group timer, thus it will use it for the interrupt watchdog,
which is more critical than the task watchdog. The latter is implement in
software thanks to the `esp_timer`component.
Fixed some BLE controller bugs on ESP32-C3 and ESP32-S3
Closes BT-2760, BT-2733, BT-2687, BT-2588, BT-2574, BT-2470, and BT-2355
See merge request espressif/esp-idf!19970
Fixed calling esp_ble_get_cur_sendable_packets_num() sometimes crashes when bluetooth is disconnecting
Closes BT-2699
See merge request espressif/esp-idf!19993
This commit synchronizes multiple functions in tasks.c with upstream v10.4.3
that contain minor differences.
The following functions have had their parameter names or code formatting
updated:
- xTaskCreateStaticPinnedToCore()
- xTaskCreatePinnedToCore()
- prvInitialiseNewTask()
- prvTaskIsTaskSuspended()
- vTaskStartScheduler()
- xTaskResumeAll()
- xTaskCheckForTimeOut()
- uxTaskResetEventItemValue()
The following functions have had their missing "xAlreadyYielded" restored
- xTaskDelayUntil()
- vTaskDelay()
The following functions have had their critical section/interrupt disdable
usage update
- vTaskSuspendAll()
- xTaskGetTickCountFromISR()
- xTaskGetApplicationTaskTagFromISR()
This commit synchronizes multiple functions that contain major differences with
upstream v10.4.3. Multi-core modifications are then reapplied to the function.
Vanilla code uses "pxTCB == pxCurrentTCB" to check whether a task is currently
running. This commit adds the following macros instead.
- taskIS_CURRENTLY_RUNNING()
- taskIS_CURRENTLY_RUNNING_ON_CORE()
The following functions have been updated to use those macros instead.
- eTaskGetState()
- vTaskPrioritySet()
- vTaskResume()
The following functions have been synchronized with upstream v10.4.3.
Multi-core modifications are then reapplied.
- vTaskSuspend()
- vTaskDelete()
- prvGetExpectedIdleTime()
This commit synchronizes multiple functions in queue.c with upstream v10.4.3.
Multi-core modifications are then reapplied to these functions. The following
functions were modified:
prvNotifyQueueSetContainer()
xQueueGenericCreateStatic()
xQueueGenericCreate()
xQueueGetMutexHolder()
xQueueCreateCountingSemaphoreStatic()
xQueueCreateCountingSemaphore()
xQueueGenericSend()
xQueueGenericSendFromISR()
xQueueReceiveFromISR()
uxQueueMessagesWaiting()
prvUnlockQueue()
prvIsQueueFull()
xQueueAddToSet()
xQueueRemoveFromSet()
prvNotifyQueueSetContainer()
Note: The SEGGER_SYSVIEW traceQUEUE_SEND() macro was updated as the
xCopyPosition argument is no longer available in scenarios where the
macro is called.
- The callback `open_fn` is used for creating a new SSL session
with httpd_sess_new.
- If the call fails, the active socket count (httpd_data->hd_sd_active_count)
is not incremented. But, httpd_sess_delete is called, which decrements the
count, resulting in a negative value for several failed session creations
in a row.
Closes https://github.com/espressif/esp-idf/issues/9683
- Fixed the performance issue of usage of PLL track related baseband IRQsFixed the performance issue of BLE sync scan in coexistence scenario when PLL track is enabled
- Fixed connect failed due to error sync found signal
- Fixed BLE disconnect failed due to terminate_ind have sent but no ACK is received
- Added ADV mode error check in ADV rx isr handler function
- Fixed BLE RAL_UNDERRUN and TX_CRYPT_ERR assert
- Disable scan continue
- Fixed scan forever if scan continue is disable
bt: Fixed sink not being able to output mono audio because it can only decode dual channel audio data
Closes BT-2698
See merge request espressif/esp-idf!19759
define: lock_bits = (lock->status & LOCK_MASK) >> LOCK_SHIFT; This `lock_bits` is the Bit 29-20 of the lock->status
1. spi_hdl_1:
acquire_end_core():
uint32_t status = lock_status_clear(lock, dev_handle->mask & LOCK_MASK);
Becuase this is the first `spi_hdl_1`, so after this , lock_bits == 0`b0. status == 0
2. spi_hdl_2:
acquire_core:
uint32_t status = lock_status_fetch_set(lock, dev_handle->mask & LOCK_MASK);
Then here status is 0`b0, but lock_bits == 0`b10. Because this is the `spi_hdl_2`
3. spi_hdl_2:
`acquire_core` return true, because status == 0. `spi_bus_lock_acquire_start(spi_hdl_2)` then won't block.
4. spi_hdl_2:
spi_device_polling_end(spi_hdl_2).
5. spi_hdl_1:
acquire_end_core:
status is 0, so it cleas the lock->acquiring_dev
6. spi_hdl_2:
spi_device_polling_end:
assert(handle == get_acquiring_dev(host)); Fail
Closes https://github.com/espressif/esp-idf/issues/8179
This commit fixes incorrect usage of memset() in the HCD's various
_buffer_parse_...() functions. The memset was not clearing the qtd lists, and
were simply setting the first qtd to a non zero value (i.e., the length of
the QTD list).
However, no bug occurred as the subsequent _buffer_fill_...() functions would
overwrite the QTD list anyways.
This commit adds support for using the RTC I2C peripheral on the ULP
RISC-V core for esp32s2 and esp32s3. It also adds an example to demonstrate the
usage of the RTC I2C peripheral.
This commit also modifies the rtc_i2c register structure files to enable
the use of bitfields in the ULP RISC-V RTC I2C driver.
bt:Fixed deadlock due to wrong parameter when calling btc_transfer_context() after calling esp_bluedroid_disable()
Closes IDFGH-8175 and BT-2744
See merge request espressif/esp-idf!19859
This commit fixes build issue because of function `bootloader_common_reset_rtc_retain_mem`
getting inlined with compiler optimization level set to `PERF` (-O2).
Build failure log:
-----------------
In function 'bootloader_common_reset_rtc_retain_mem',
inlined from 'bootloader_common_update_rtc_retain_mem' at /h/esp-idf/components/bootloader_support/src/bootloader_common_loader.c:183:13:
/h/esp-idf/components/bootloader_support/src/bootloader_common_loader.c:159:5: error: 'memset' writing 16 bytes into a region of size 0 overflows the destination [-Werror=stringop-overflow=]
159 | memset(rtc_retain_mem, 0, sizeof(rtc_retain_mem_t));
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
update gpio_sig at `spics_out` array in each spi_periph.c of chips later than s2
then `spi_bus_add_device` can correctly distribute gpio_signals for cs_signal
Closes https://github.com/espressif/esp-idf/issues/8876
esp_https_ota: fix bug where `http_client_init_cb` is called after esp_http_client_perform()
Closes IDFGH-8080
See merge request espressif/esp-idf!19897
`wifi_prov_mgr_is_provisioned()` API uses the `esp_wifi_get_config()` API
to check if Wi-Fi credentials are configured. It does not really require
any other information from the wifi_prov component. Hence, this commit
removed dependency of this API on provisioning manager initialization state.
Closes IDF-5878
In previous gpio default isr, interrupt status bits get cleared at the exit of the isr.
However, for edge-triggered interrupt type, the interrupt status bit should be cleared before entering the per-pin handlers to avoid any potential interrupt lost.
Closes https://github.com/espressif/esp-idf/pull/6853
heap: remove misleading info about malloc being equivalent to heap_caps_malloc(p, MALLOC_CAP_8BIT)
Closes IDFGH-5971
See merge request espressif/esp-idf!19889
Wrap the ledc, i2c source files with the new caps in CMakeLists and linker.lf.
This could avoid potential source file not found warning during linking time.
User's custom data are not taken into account during the CRC calculation anymore.
Which means taht the retained mem structure is not systematically erased
on each reboot anymore.
For usb_serial_jtag REPL only, xTaskCreate was passing a pointer to
esp_console_repl_com_t, while esp_console_repl_task was expecting
a pointer to esp_console_repl_universal_t.
The way the two structures are defined, this makes no difference, and
the pointer values are the same. Still, this could potentially break
in the future.
(I am not sure what is the distinction between repl_com (common?) and
repl_universal; it seems that `int uart_channel` could just as well
be part of esp_console_repl_com_t; alternatively, as suggested in the
previous commit, this structure could contain a callback function
pointer, which would allow `esp_console_new_repl_*` functions to
specify how stdin/stdout should be initialized by the REPL task.)
The crash occurred when calling setvbuf(stdin,...) with stdin==NULL.
This happened because esp_console_repl_task started running before
its args->uart_channel was initialized; then esp_console_repl_task
went into the code path 'uart_channel != CONFIG_ESP_CONSOLE_UART_NUM',
and tried to 'fopen("/dev/uart/0");`
Since the UART VFS is not registered when ESP_CONSOLE_USB_SERIAL_JTAG
option is enabled, fopen failed and 'stdin' was NULL.
Fix by moving the initialization of repl task arguments before the
start of the task, same as it is done for the usb_cdcacm case.
The crash started happening after the commit 287ab7566b. I haven’t
verified this, but I guess the reason why it wasn’t happening before
was that xTaskCreate was not correctly yielding to the newly created
higher-priority 'repl' task, therefore the code which was setting
the repl task arguments after xTaskCreate had time to execute.
It should be noted that the 'uart_channel' argument is a bit hacky,
in the first place. The code should be refactored to pass a callback
function to the repl task, and let this callback initialize stdin and
stdout based on the chosen console channel. Then esp_console_repl_task
does not require assumptions about the specific interface used.
Closes https://github.com/espressif/esp-idf/issues/9662
essl_spi: fix wrong dummy cycle under quad spi mode ant add a test to verify spi quad mod
Closes IDF-5182 and IDF-5181
See merge request espressif/esp-idf!18680
There are multiple changes in this commit:
1. Unify the RISC-V and ULP-FSM code paths in esp32ulp_mapgen.py.
It seems that these were originally introduced because `nm` output
for the RISC-V case contained symbol sizes, while for the ULP-FSM
no symbol sizes were reported. This makes sense, because the
ULP-FSM object files are produced from assembly source, symbol
sizes have to be added manually using the .size directive.
In the case of RISC-V, the object files are built from C sources
and the sizes are automatically added by the compiler.
Now 'posix' output format is used for both RISC-V and ULP-FSM.
2. Move BASE_ADDR out of esp32ulp_mapgen.py. This now has to be passed
from CMake, which should make it easier to modify if a new chip
with a different RTC RAM base address is added.
3. Add C++ guards to the generated header file.
4. Switch from optparse to argparse for similarity with other IDF
tools.
5. Add type annotations.
* "dummy loop to force pre-processed linker file generation" seems to
be unnecessary. It looks like the idea was copied from the
dependency of ULP-FSM preprocessed source files on the LD script.
* Can use add_dependencies instead of
set_target_properties(...LINK_DEPENDS...) which is more readable
* Use target_link_options instead of target_link_libraries, which is
supported starting from CMake 3.13. Unlike target_link_libraries,
it doesn't require manually quoting the pats.
