morris
54507f0113
Merge branch 'refactor/usb_remove_unused_files_v5.1' into 'release/v5.1'
...
USB: Remove unused HAL files and deprecate usb_periph (v5.1)
See merge request espressif/esp-idf!29790
2024-05-11 22:36:18 +08:00
Song Ruo Jing
a664c71fd7
fix(uart): Fix mismatch wakeup rising edges required with the threshold configured
...
Closes https://github.com/espressif/esp-idf/issues/12586
2024-04-24 17:21:37 +08:00
Darian Leung
0205ed9dc6
refactor(hal): Remove usb_hal and usb_ll
...
This commit removes some legacy USB related HAL and LL files that are no longer
used.
2024-03-22 15:21:51 +08:00
Darian Leung
d837836f84
refactor(hal/usb): Rename usb_fsls_phy API to match header/source names
...
Note: Also fixed some formatting issues in usb_wrap_struct.h
2024-02-28 16:09:52 +08:00
Darian Leung
148cc6e75d
refactor(hal/usb): Rename usb_phy files to usb_fsls_phy
...
This commit renames USB PHY related HAL files from "usb_phy_xxx" to
"usb_fsls_phy_xxx" since they are only designed to support Full-Speed/Low-Speed
Serial USB PHYs. This renmaing is done to accommodate future USB PHYs that use
other PHY interfaces (e.g., UTMI, ULPI etc).
2024-02-28 16:09:52 +08:00
Cao Sen Miao
dfff867379
fix(tempertuer_sensor): Fix regs on temperature sensor is not volatile due to GCC bug
2023-12-15 16:41:16 +08:00
Cao Sen Miao
9dd90e2d9b
fix(bod): Reset brownout in configuration to avoid RF cannot be enabled again
2023-12-07 10:33:58 +08:00
Shu Chen
ecbbd3c3d9
Merge branch 'backport/add_ot_radio_stats_enable_config_5_1' into 'release/v5.1'
...
feat(openthread): backport some openthread features(BackportV5.1)
See merge request espressif/esp-idf!26885
2023-11-22 12:23:53 +08:00
morris
64e7343e40
Merge branch 'bugfix/fix_adc_read_zero_h2_v5.1' into 'release/v5.1'
...
ADC: fix adc raw data get 0 because of signal delay on ESP32H2(v5.1)
See merge request espressif/esp-idf!26976
2023-11-21 11:08:57 +08:00
Jiang Jiang Jian
0e1ec38785
Merge branch 'bugfix/fix_lightsleep_current_leakage_on_usj_pad_v5.1' into 'release/v5.1'
...
fix(esp_hw_support): fix lightsleep current leakage on usb pad (backport v5.1)
See merge request espressif/esp-idf!27205
2023-11-21 10:51:11 +08:00
morris
ddb6d22468
Merge branch 'feature/gpio_dump_io_info_v5.1' into 'release/v5.1'
...
feat(gpio): add a dump API to dump IO configurations (v5.1)
See merge request espressif/esp-idf!26870
2023-11-17 16:30:22 +08:00
gaoxu
1179d9859f
fix(adc): fix h2 adc oneshot read zero and add delay after getting done signal v5.1
2023-11-17 02:16:21 +00:00
wuzhenghui
6ae596c764
fix(esp_hw_support): fix lightsleep current leakage on usb-phy controlled pad
2023-11-16 20:03:30 +08:00
morris
bfeae3857c
feat(rmt): support calling rmt_receive in ISR callback
2023-11-15 05:57:45 +00:00
Jiang Jiang Jian
0172c33818
Merge branch 'bugfix/fix_deinit_init_wifi_scan_fail_issue_v5.1' into 'release/v5.1'
...
Bugfix/fix deinit init wifi scan fail issue v5.1(Backport v5.1)
See merge request espressif/esp-idf!27064
2023-11-14 15:25:54 +08:00
muhaidong
abfd0cbebc
change(hal): remove useless code from periph_ll_wifi_bt_module_enable_clk
2023-11-10 11:15:49 +08:00
Armando
6de9757a4b
fix(adc): rename ADC_ATTEN_DB_11 to ADC_ATTEN_DB_12
...
By design, it's 12 dB. There're errors among chips, so the actual
attenuation will be 11dB more or less
2023-11-07 14:09:21 +08:00
Song Ruo Jing
4892c481b5
feat(gpio): add a dump API to dump IO configurations
...
Merges https://github.com/espressif/esp-idf/pull/12511
2023-11-03 16:21:31 +08:00
Lou Tianhao
9b3e40c9d1
feat(pm/deepsleep): Support EXT1_WAKEUP_MODE_PER_PIN
2023-11-03 11:02:56 +08:00
morris
f41df5641a
Merge branch 'bugfix/gptimer_hal_placement_wrong_condition_v5.1' into 'release/v5.1'
...
fix(gptimer): hal function placement under wrong condition (v5.1)
See merge request espressif/esp-idf!25280
2023-08-23 23:21:20 +08:00
morris
77b74ab091
Merge branch 'bugfix/spi_bus_unify_defualt_mosi_level_v5.1' into 'release/v5.1'
...
spi: unify default mosi level on all targets (v5.1)
See merge request espressif/esp-idf!25014
2023-08-17 10:13:05 +08:00
morris
c113507ad7
feat(gptimer): add gptimer linker.lf to control the placement of driver and hal
...
since the linker placement of the hal functions are controlled by the Kconfig in the driver component,
we should create the linker.lf in the driver component, not in the hal component.
2023-08-14 02:31:16 +00:00
wanlei
bb845e1841
cache: refactor cache_utils into cache_hal instade
2023-07-31 14:52:03 +08:00
wanlei
7a30edc412
fix(all): unify default mosi level to low on all targets
2023-07-26 20:34:25 +08:00
Armando
d21e332281
fix(adc): fixed esp32, esp32s2,esp32s3 adc oneshot mode clk div issue
2023-07-12 17:10:58 +08:00
Cao Sen Miao
f44e8a8a8f
brownout: Disable the hardware BOD when BOD interrupt is enabled
2023-07-11 14:32:40 +08:00
Cao Sen Miao
e493a99da2
temperature_sensor: Apply new-shared interface in temperature sensor driver
2023-07-10 11:16:09 +08:00
laokaiyao
13e74d5573
i2s: fixed i2s_ll compiling failure under C++ evironment
...
Closes: https://github.com/espressif/esp-idf/issues/11625
2023-06-26 15:42:36 +08:00
wuzhenghui
ed076c2bc8
bugfix: move adc_oneshot_power_acquire/release to adc_oneshot_read
...
Closes https://github.com/espressif/esp-idf/issues/10595
Closes https://github.com/espressif/esp-idf/issues/11386
2023-05-18 20:08:47 +08:00
morris
f79088f115
Merge branch 'bugfix/add_len_check_per_spi_master_transaction_v5.1' into 'release/v5.1'
...
spi master: added transaction length check to refuse longer than hardware supported length (v5.1)
See merge request espressif/esp-idf!23747
2023-05-18 16:47:18 +08:00
morris
0814386710
Merge branch 'refactor/driver_ut_to_test_app_v5.1' into 'release/v5.1'
...
CI: Move all UT in driver to test_app(backport v5.1)
See merge request espressif/esp-idf!23708
2023-05-18 16:18:26 +08:00
Armando
4943844764
spi: added transaction length check to refuse longer than hardware supported length
2023-05-17 09:03:26 +00:00
Cao Sen Miao
df7a27e36d
CI: Move all UT in driver to test_app
2023-05-16 16:42:28 +08:00
KonstantinKondrashov
2165ff386e
hal: Explicit setting of efuse time settings
...
EFUSE_PWR_ON_NUM in C3 has default value = 0x2880, now = 0x3000
2023-05-12 21:42:38 +08:00
morris
d12ad17373
rmt: check filter and idle threashold
...
Closes https://github.com/espressif/esp-idf/issues/11262
2023-05-05 19:07:59 +08:00
Song Ruo Jing
5070e51dde
ledc: Fix two bugs inside LEDC driver
...
1. Regression introduced when refactoring on clock sources selection (0d07f859
).
If channel configuration is called before timer configuration on C6, PWM signal may not be able to output.
2. Missing the improper fade parameter fix inside ledc_set_duty_and_update() function.
2023-04-06 12:37:33 +08:00
KonstantinKondrashov
5b00d1f396
efuse: Update efuses for esp32 esp32c2 esp32c3 esp32s2 esp32s3
2023-04-04 22:32:32 +08:00
jingli
238f31d93b
uart: add low level func for uart to set err wr mask
2023-03-09 10:28:33 +08:00
Armando (Dou Yiwen)
4452a3cf3e
Merge branch 'feature/support_h2_adc' into 'master'
...
adc: support adc h2
Closes IDF-6124, IDF-6214, IDF-6543, IDF-6215, IDF-6664, and IDF-6695
See merge request espressif/esp-idf!22205
2023-02-24 14:28:33 +08:00
Marius Vikhammer
c2f9392be5
Merge branch 'feature/h2_wdt' into 'master'
...
wdt: add support for H2
Closes IDF-6643 and IDF-6678
See merge request espressif/esp-idf!22422
2023-02-24 13:48:20 +08:00
Armando
486c765a93
adc: remove adc_hal_conf.h
...
Macros inside adc_hal_conf.h are moved to adc_ll.h
2023-02-23 11:48:31 +08:00
Armando
c2d5c19b28
adc: ll enum renaming
2023-02-23 11:48:31 +08:00
Marius Vikhammer
5d26a0de9a
wdt: add support for H2
2023-02-23 11:22:51 +08:00
Alexey Lapshin
36d0e275a0
hal: always inline clk_tree_ll functions
2023-02-22 05:33:03 +00:00
Jing Li
75a82988f1
Merge branch 'refactor/wdt_use_unified_type' into 'master'
...
wdt: refactor wdt codes to use unified type
Closes IDF-5653
See merge request espressif/esp-idf!22378
2023-02-21 09:46:06 +08:00
Armando
82ee8403b6
mmu: mmu_hal_check_valid_ext_vaddr_region
2023-02-17 13:04:55 +08:00
jingli
9c37441b17
wdt: refactor wdt codes to use unified type
2023-02-15 12:08:55 +08:00
Armando
3afa671069
esp_adc: added adc digital filter feature
2023-02-10 16:46:20 +00:00
Song Ruo Jing
b69f983525
uart: Fix two TX concurrency issues
...
1. Concurrency might cause ESP_ERR_TIMEOUT when calling uart_wait_tx_done
2. Concurrency might cause RTS line being de-assreted during tx transmission for rs485 mode
2023-02-08 14:24:43 +08:00
Armando
d6844051fc
esp_mm: new virtual memory mapping apis via mmu
2023-02-07 20:23:52 +08:00