morris
4154eaec93
sdm: clean up soc/hal/ll code
2022-07-20 14:59:50 +08:00
morris
bec44ca2e9
gptimer: test on c2 with xtal 26mhz
2022-07-20 04:40:28 +00:00
Song Ruo Jing
4734b1433b
Merge branch 'bugfix/gpio_hal_coverity_fix' into 'master'
...
gpio: Fix ESP32S3 GPIO48 does not support hold function bug and Fix coverity report
Closes IDF-4901
See merge request espressif/esp-idf!18805
2022-07-19 21:37:15 +08:00
Armando (Dou Yiwen)
9f6f61345b
Merge branch 'feature/adc_driver_ng' into 'master'
...
ADC Driver NG
Closes IDF-4560, IDF-3908, IDF-4225, IDF-2482, IDF-4111, IDF-3610, IDF-4058, IDF-3801, IDF-3636, IDF-2537, IDF-4310, IDF-5150, IDF-5151, and IDF-4979
See merge request espressif/esp-idf!17960
2022-07-19 21:28:31 +08:00
Cao Sen Miao
53580a62b5
I2C: Fullfill the I2C clock tree, and support 26M XTAL on ESP32-C2
2022-07-19 11:41:42 +08:00
Armando
5b523a3313
esp_adc: new esp_adc component and adc drivers
2022-07-15 18:31:00 +08:00
songruojing
145454356b
gpio: Fix ESP32S3 GPIO48 does not support hold function bug
...
GPIO_HOLD_MASK array was missing the last item
Add __Static_assert to check array sizes for all gpio_periph.c files to prevent same mistake in the future.
2022-07-15 16:51:25 +08:00
Jiang Jiang Jian
b610b47a83
Merge branch 'feature/esp32s3_memprot_additional_improvements' into 'master'
...
[System/Security] Memprot after-merge improvements (v5.0)
Closes IDF-5263 and IDF-5208
See merge request espressif/esp-idf!18893
2022-07-13 15:48:20 +08:00
Jiang Jiang Jian
3630713e5f
Merge branch 'docs/esp32c2_sys_feature_api_guides' into 'master'
...
docs: update system API-guides for ESP32-C2
Closes IDF-4202, IDF-4213, and IDF-4222
See merge request espressif/esp-idf!18979
2022-07-12 10:59:12 +08:00
Marius Vikhammer
d62421619c
docs: update system API-guides for ESP32-C2
2022-07-12 09:32:43 +08:00
Song Ruo Jing
ea97cc93ea
Merge branch 'feature/c2_systimer_26mhz' into 'master'
...
esp32c2: 26 MHz XTAL support: Kconfig option, systimer support
Closes IDF-5412 and IDF-5413
See merge request espressif/esp-idf!18835
2022-07-11 16:17:25 +08:00
songruojing
b3d8db3ae2
bootloader, esp_system: esp32c2 console uart to support 26MHz xtal
...
Gets the XTAL frequency from the RTC storage register, remove UART_CLK_FREQ_ROM macro from soc.h
2022-07-11 12:24:58 +08:00
songruojing
ef813b23fa
rtc: esp32c2 support 26MHz xtal in startup code and rtc_clk.c
2022-07-11 12:24:58 +08:00
Ivan Grokhotkov
2e37218ce5
soc, hal: remove XTAL_CLK_FREQ
...
XTAL_CLK_FREQ now depends on the actual XTAL used, remove this macro
and get the XTAL frequency from the RTC register instead.
No uses of XTAL_CLK_FREQ found, other than in the UART LL.
2022-07-11 12:24:58 +08:00
Ivan Grokhotkov
5b54ae76d4
esp_timer, hal: add support for non-integer systimer frequency
...
When ESP32-C2 is paired with a 26 MHz XTAL, the systimer tick
frequency becomes equal to 26 / 2.5 = 10.4 MHz. Previously we always
assumed that systimer tick frequency is integer (and 1 MHz * power of
two, above that!).
This commit introduces a new LL macro, SYSTIMER_LL_TICKS_PER_US_DIV.
It should be set in such a way that:
1. SYSTIMER_LL_TICKS_PER_US / SYSTIMER_LL_TICKS_PER_US_DIV equals the
actual systimer tick frequency,
2. and SYSTIMER_LL_TICKS_PER_US is integer.
For ESP32-C2 this means that SYSTIMER_LL_TICKS_PER_US = 52 and
SYSTIMER_LL_TICKS_PER_US_DIV = 5.
This introduced two possible issues:
1. Overflow when multiplying systimer counter by 5
- Should not be an issue, since systimer counter is 52-bit, so
counter * 5 is no more than 55-bit.
2. The code needs to perform:
- divide by 5: when converting from microseconds to ticks
- divide by 52: when converting from ticks to microseconds
The latter potentially introduces a performance issue for the
esp_timer_get_time function.
2022-07-11 12:24:37 +08:00
Martin Vychodil
0c87ae2a91
System/Security: Memprot API unified (ESP32S3)
...
Added missing features and improvements
2022-07-09 22:57:51 +02:00
Jiang Jiang Jian
a7bf3af687
Merge branch 'bugfix/reset_ble_hw_on_inititalization' into 'master'
...
component/bt: reset Bluetooth hardware during controller inititalization on ESP32-C3/ESP32-S3
Closes BT-2402
See merge request espressif/esp-idf!18831
2022-07-08 16:21:41 +08:00
morris
75bd6fc2d9
Merge branch 'contrib/github_pr_9302' into 'master'
...
ESP32S3 USB external PHY pinout (GitHub PR)
Closes IDFGH-7761
See merge request espressif/esp-idf!18909
2022-07-07 16:17:26 +08:00
morris
b0e228f756
soc: update copyright for usb phy pins
2022-07-07 11:50:06 +08:00
Michael (XIAO Xufeng)
a58362a429
Merge branch 'feature/efuse_rev_major_minor' into 'master'
...
efuse: Adds major and minor versions
See merge request espressif/esp-idf!18255
2022-07-07 11:48:54 +08:00
Song Ruo Jing
b662f4b74f
Merge branch 'feature/support_26M_32M_xtal_bbpll_c2' into 'master'
...
support c2 26M/32M xtal for bbpll
Closes IDF-5485
See merge request espressif/esp-idf!18769
2022-07-06 21:17:52 +08:00
lsita
9ceff23c6d
USB external PHY pinout set as in Reference Manual Figure 29-3.
2022-07-06 14:54:35 +02:00
wangmengyang
f86efb2bc2
fix licence copyright for header file syscon_reg.h on ESP32C3 and ESP32S3
2022-07-06 16:24:03 +08:00
wangmengyang
1d55f12c2d
component/bt: reset Bluetooth hardware during controller inititalization on ESP32-C3/ESP32-S3
...
1. Rename MACROs SYSTEM_WIFI_RST_EN register bit fields to be more recognizable
2. reset Bluetooth baseband and clock bits to fix the issue of task watchdog triggered during controller initialization due to invalid hardware state
2022-07-06 16:23:48 +08:00
morris
627b171a3c
Merge branch 'feature/enable_rpa_modem_reset_function_in_esp32h2' into 'master'
...
Enable rpa_moudle reset function
See merge request espressif/esp-idf!18891
2022-07-06 14:47:37 +08:00
GengYuchao
d145c337e0
Enable rpa_moudle reset function
2022-07-05 20:50:31 +08:00
cje
e16165f263
support c2 26M/32M xtal for bbpll
2022-07-05 17:45:03 +08:00
KonstantinKondrashov
0f8ff5aa15
efuse: Adds major and minor versions and others
2022-07-05 14:38:27 +08:00
Jakob Hasse
f8b5ed5d6c
refactor (soc, esp_rom)!: removed target-specific ROM dependencies
2022-07-05 13:57:58 +08:00
morris
7863c1bc45
Merge branch 'bugfix/fix_rtc_freq_err_for_h2_beta1' into 'master'
...
Bugfix/fix rtc freq err for h2 beta1
See merge request espressif/esp-idf!18682
2022-07-04 16:46:17 +08:00
Omar Chebib
cd48baf979
Refactor: move regi2c_*.h header files from esp_hw_support to soc component
...
When creating G0 layer, some regi2c_*.h headers were moved out from
esp_hw_support (G1) to soc (G0). In order to be consistent with that change,
move all the remaining regi2c_*.h headers to soc too.
2022-06-30 09:40:44 +00:00
GengYuchao
10fd1daa10
Add ETM clk gate defines for h2
2022-06-30 17:02:00 +08:00
Armando (Dou Yiwen)
e13d7f8351
Merge branch 'bugfix/s2_ap64_psram_crash_issue' into 'master'
...
psram: fix esp32s2 module with APS6404 PSRAM crash issue
Closes IDF-5361
See merge request espressif/esp-idf!18699
2022-06-29 11:19:17 +08:00
Armando
31b3f31ef4
ext_mem: make memory region check strict
2022-06-28 14:17:44 +08:00
morris
7fd9a91034
dma: move from driver to hw_support
2022-06-28 14:17:12 +08:00
Mahavir Jain
c619e2162d
Merge branch 'feature/memprot_settings_to_soc_caps' into 'master'
...
esp_system: move MEMPROT related configuration to soc capability header
Closes IDF-4506
See merge request espressif/esp-idf!18645
2022-06-24 18:08:19 +08:00
Mahavir Jain
dd24639215
Merge branch 'esp32h2/enable_ecc_accelerator' into 'master'
...
esp32h2: Enable ECC accelerator
Closes IDF-3397
See merge request espressif/esp-idf!18647
2022-06-23 20:06:26 +08:00
Cao Sen Miao
3a820462ac
temperature_sensor: Add temperature sensor support for ESP32-C2
2022-06-23 15:36:43 +08:00
Sachin Parekh
6cfc9c365f
esp32h2: Enable ECC accelerator
2022-06-23 12:59:13 +05:30
Marius Vikhammer
7e60e07a0a
Merge branch 'feature/esp8684_sha' into 'master'
...
mbedtls: enable hw support for SHA on C2
Closes IDF-3830 and IDF-5141
See merge request espressif/esp-idf!18531
2022-06-23 14:18:49 +08:00
Mahavir Jain
0a12eab32e
esp_system: move MEMPROT related configuration to soc capability header
...
Closes IDF-4506
2022-06-23 10:29:42 +05:30
Marius Vikhammer
f4c79687f8
SHA: added hardware support for SHA on C2.
2022-06-23 11:01:16 +08:00
Zim Kalinowski
136c873364
Merge branch 'refactor/g0_for_xtensa' into 'master'
...
G0: Support Xtensa targets for G0-only compilation
Closes IDF-3087
See merge request espressif/esp-idf!18538
2022-06-23 07:28:37 +08:00
muhaidong
96f86e0bb4
esp_wifi: esp32c2 does not support wifi mesh
2022-06-21 16:48:52 +08:00
muhaidong
b48b9beace
esp_wifi: esp32c2 does not support csi.
2022-06-20 21:47:51 +08:00
muhaidong
9a25d06b5f
esp_wifi: esp32s2 esp32c3 and esp32s3 support ftm
2022-06-20 21:47:51 +08:00
morris
865937fba3
Merge branch 'bugfix/fix_esp32c2_dose_not_support_wapi' into 'master'
...
esp_wifi: esp32c2 does not support wapi
Closes IDF-4216
See merge request espressif/esp-idf!18573
2022-06-20 21:31:54 +08:00
muhaidong
2ccce0ca41
esp_wifi: update comments of WI-FI CAPS in soc_caps.h
2022-06-20 19:43:16 +08:00
Omar Chebib
8fae0f0753
G0: Support Xtensa targets for G0-only compilation
...
G0-only example now supports Xtensa targets. This means that G0 layer
does not depend on G1+ layers anymore
2022-06-20 11:34:20 +00:00
Martin Vychodil
692b9980b5
Merge branch 'feature/memprot_api_unified_s3_2' into 'master'
...
System/Security: Memprot API unified (ESP32S3)
See merge request espressif/esp-idf!16169
2022-06-20 17:34:22 +08:00