krzychb
b2ecaa64f0
Added a note how to modify ESP-WROVER-KIT V3 hardware to improve flash bus signal's integrity when using 80 MHz flash frequency. Due to length of the signal lines the flash mode QIO + 80M is not stable and may cause random exceptions on the ESP-WROVER-KIT.
2018-03-02 15:26:46 +01:00
Ivan Grokhotkov
0538daa3f4
Merge branch 'bugfix/docs_missing_reference' into 'master'
...
Added missing references to the current and previous ESP32-DevKitC board versions
See merge request idf/esp-idf!1920
2018-02-26 06:39:54 +08:00
Ivan Grokhotkov
04ad0f79c0
Merge branch 'adc_calibration_update' into 'master'
...
ADC Calibraiton - Support new new calibration methods and eFuse functionality
See merge request idf/esp-idf!1846
2018-02-26 06:15:06 +08:00
Ivan Grokhotkov
c8ba6cf156
Merge branch 'feature/rtc_gpio_isolate' into 'master'
...
Add rtc_gpio_isolate function, use it in deep sleep examples
See merge request idf/esp-idf!1936
2018-02-26 06:09:08 +08:00
Darian Leung
0c9e2c0fba
esp_adc_cal/Remove lookup table
...
This commit removes the lookup table mode due to inferior performance when compared
to linear mode under attenuation 0, 1 and 2. However small portions of the lookup table
are kept for the higher voltages of atten 3 (above ADC reading 2880). That voltage range
in atten 3 has non linear characteristics making the LUT performan better than linear mode.
2018-02-22 20:01:41 +08:00
Roland Dobai
4017cf3516
partition_table: Optionally disable the MD5 checksum in partition tables
2018-02-22 07:46:41 +01:00
Angus Gratton
63ddae5087
Merge branch 'bugfix/i2s_driver' into 'master'
...
i2s: add support fixed_mclk configuration
See merge request idf/esp-idf!1600
2018-02-22 12:03:26 +08:00
Tuan PM
7cda34c626
i2s: add support fixed_mclk configuration
2018-02-22 09:00:23 +07:00
STB3
0bde61e3ca
Update eclipse-setup.rst
...
Chapter Flash from Eclipse: Changed "Select Make Targets -> ..." to "Select Build Targets -> ..." to match the Eclipse wording. Same with "Project -> Make Target" replace Make by build to match the Eclipse wording.
2018-02-15 21:13:01 +01:00
njyq2008
37b98f7306
Update index-cn.rst. Closes https://github.com/espressif/esp-idf/issue/1620
2018-02-13 15:06:05 +01:00
SmallRoomLabs
ef080c0841
Remove the THEN keyword from IF. Closes https://github.com/espressif/esp-idf/issue/1606
...
Both the TinyBasicPlus and the ESP32 variant don't use the THEN keyword in a IF statement
2018-02-13 15:06:05 +01:00
Darian Leung
73cdfbfe79
esp_adc_cal/Add eFuse functionality
...
This commit updates the esp_adc_cal ocmponent to support new calibration methods
which utilize calibratoin values stored in eFuse. This commit includes LUT mode
2018-02-13 21:22:48 +08:00
Ivan Grokhotkov
af6cfc5552
docs, examples: use rtc_gpio_isolate to disconnect GPIO12
...
This is needed to reduce deep sleep current on ESP32-WROVER modules.
Ref TW18165.
2018-02-11 13:28:47 +08:00
Alexey Gerenkov
f8c42369f1
freertos: Adds C11 TLS support
2018-02-07 18:46:57 +03:00
krzychb
ade6bd4ad8
Added missing references to the current and previous board versions
2018-02-06 18:54:58 +01:00
Roland Dobai
cf7a4cc650
Protect partition table by MD5 checksum
2018-02-05 11:36:03 +01:00
Ivan Grokhotkov
8ef7434d55
Merge branch 'feature/docs_devkitc-v4' into 'master'
...
Docs for ESP32 DevKitC V4
See merge request idf/esp-idf!1853
2018-02-01 12:20:17 +08:00
krzychb
c759ff3aab
Docs for ESP32 DevKitC V4
2018-01-31 18:31:13 +01:00
Ivan Grokhotkov
e676676541
Merge branch 'bugfix/ulp_docs_typo' into 'master'
...
Fix typo in ulp_instruction_set.rst. Merges https://github.com/espressif/esp-idf/pull/1540
See merge request idf/esp-idf!1874
2018-01-30 12:17:24 +08:00
Markus Witt
75011a8611
Fix typo in ulp_instruction_set.rst. Merges https://github.com/espressif/esp-idf/pull/1540
2018-01-29 21:56:55 +01:00
Jiang Jiang Jian
58f0edfd03
Merge branch 'bugfix/btdm_tutorials_compatible_with_github' into 'master'
...
component/bt: modify ble tutorials to make them be compatible with GitHub markdown
See merge request idf/esp-idf!1786
2018-01-29 15:47:36 +08:00
island
e22f8ad1aa
component/bt: Update BLE examples tutorials and ReadMe files
...
- Make docs compatible with GitHub Markdown
- Add tutorials links in programming doc
- Modify ReadMe files
2018-01-25 16:59:40 +08:00
michael
fcfcab7678
feat(attr): add new macro DMA_ATTR
and WORD_ALIGNED_ATTR
to help dma buffer declaration.
2018-01-24 11:28:14 +08:00
Ivan Grokhotkov
3bc1a8318b
Merge branch 'doc/debian_build_prereqs' into 'master'
...
docs: Add build dependencies for toolchain for Debian (Github PR)
See merge request !1830
2018-01-23 15:38:09 +08:00
Ivan Grokhotkov
f6cfe92533
Merge branch 'feature/support-markdown-docs' into 'master'
...
docs : Add support for markdown files
See merge request !1781
2018-01-23 15:36:12 +08:00
Urs Fässler
93872837d3
Add build dependencies for toolchain for Debian
...
Merges https://github.com/espressif/esp-idf/pull/1465
2018-01-23 11:38:28 +11:00
krzychb
f3ccc5da4f
Custom link roles have been extended to provide an option of displaying some text where originally a bare link is rendered
2018-01-17 20:01:36 +01:00
me-no-dev
4bddbc031c
Import mDNS changes
2018-01-16 10:58:34 +02:00
Anuj Deshpande
bd47f405a3
docs : Add support for markdown files
2018-01-15 13:58:31 +08:00
Wu Jian Gang
595688a32a
Merge branch 'feature/doc_translations' into 'master'
...
Feature/doc translations
See merge request !1718
2018-01-12 21:09:03 +08:00
lvxinyue
3bdd62ec1c
docs: add CN translation of Windows setup guide
2018-01-12 20:41:32 +08:00
lvxinyue
b7e6d31d42
docs: add CN translation of Linux setup guide
2018-01-12 20:41:32 +08:00
Ivan Grokhotkov
2ddee72996
Merge branch 'feature/toolchain-80-g6c4433a' into 'master'
...
Toolchain: Update to version 1.22.0-80-g6c4433a
See merge request !1771
2018-01-11 21:44:42 +08:00
Angus Gratton
3ef69b8e6d
docs: Add a temporary index page to get CN docs started
2018-01-11 18:18:55 +08:00
Ivan Grokhotkov
914ab07567
Merge branch 'feature/ulp_i2c_reg' into 'master'
...
soc,ulp: add register definitions of RTC_I2C peripheral
See merge request !1762
2018-01-11 12:08:25 +08:00
Angus Gratton
853736afe2
Toolchain: Update to version 1.22.0-80-g6c4433a
...
Includes updated prebuilt Windows MSYS2 environment.
2018-01-10 07:49:24 +00:00
Jiang Jiang Jian
c147d7b03e
Merge branch 'feature/btdm_bt_spp' into 'master'
...
component/bt: Add bt spp profile
See merge request !1593
2018-01-09 10:44:46 +08:00
Angus Gratton
7ea16872d4
Merge branch 'bugfix/docs-pico-kit-swapped-pins' into 'master'
...
Fixed swapped GPIO6 and GPIO11 in ESP-PICO-KIT 'Pin Descriptions', ref. https://esp32.com/viewtopic.php?f=2&t=3880
See merge request !1736
2018-01-09 08:53:10 +08:00
Ivan Grokhotkov
dba291416f
soc,ulp: add register definitions of RTC_I2C peripheral
2018-01-08 21:28:14 +08:00
baohongde
d2663c866e
component/bt: Add SPP profile
2018-01-05 16:48:29 +08:00
JoveToo
ecb75ba669
fix typo
...
Merges https://github.com/espressif/esp-idf/pull/1429
2018-01-03 10:51:34 +11:00
Greg Herlein
a834c069f1
added notes on where to change XTAL freq
...
Merges https://github.com/espressif/esp-idf/pull/1458
2018-01-03 10:45:00 +11:00
krzychb
03d5af9859
Fixed swapped GPIO6 and GPIO11 in documenation of module pinout, ref. https://esp32.com/viewtopic.php?f=2&t=3880
2018-01-02 22:30:45 +01:00
Angus Gratton
4f44d16e88
Merge branch 'feature/docs_add_python3_support' into 'master'
...
docs: Add build support for python3
See merge request !1712
2017-12-29 06:11:50 +08:00
Angus Gratton
ec7cac5fe8
Merge branch 'feature/docs_update_rmt_api' into 'master'
...
RMT API docs update, new example
See merge request !1564
2017-12-27 09:23:47 +08:00
Angus Gratton
258d0329c1
Merge branch 'bugfix/blockdiag_windows_installation' into 'master'
...
A workaround for MSYS2 / Windows system to be able to install 'blockdiag'
See merge request !1684
2017-12-27 09:05:12 +08:00
Anuj Deshpande
59b0c50d77
docs: Add build support for python3
2017-12-26 17:48:33 +05:30
Ivan Grokhotkov
c488235e9c
Merge branch 'feature/components_can_add_to_component_make_rules' into 'master'
...
Support Makefile.componentbuild so components can add to global component make rules
See merge request !1667
2017-12-22 11:40:54 +08:00
Jeroen Domburg
1be1e747c4
Add support for Makefile.componentbuild files
2017-12-20 10:35:27 +08:00
Tuan PM
5615b9ca2b
Add .editorconfig file
...
remove newlinet in binary file
editorconfig style guide
correct format for rst hyperlinks
2017-12-18 12:47:30 +07:00
krzychb
d2da250353
A workaround for MSYS2 / Windows system to be able to install 'blockdiag'
2017-12-18 05:34:44 +01:00
michael
cb810ccbe1
feat(monitor): add pause feature.
2017-12-14 13:48:03 +08:00
michael
a8f89009a4
feat(monitor): add new feature allowing disabling log display.
2017-12-14 13:48:03 +08:00
Ivan Grokhotkov
661686b840
Merge branch 'feature/doc_wroom_modules_with_ESP32-D0WD' into 'master'
...
The WROOM and WROVER family of modules is now extended with ESP-WROOM-32D and ESP32-WROOM-32U
See merge request !1654
2017-12-14 13:36:49 +08:00
Ivan Grokhotkov
d2bd9cccd8
Merge branch 'feature/ulp_docs_update' into 'master'
...
ULP docs update
See merge request !1640
2017-12-13 15:36:36 +08:00
krzychb
465ab0ca10
Linked ESP32 datasheet and regulatory certificates
2017-12-12 08:42:22 +01:00
Ivan Grokhotkov
a7a861962d
Merge branch 'bugfix/note_about_main_xtal_frequency_selection' into 'master'
...
Getting Started docs: Updated information about setting the main XTAL frequency
See merge request !1645
2017-12-11 15:45:01 +08:00
Ivan Grokhotkov
82aeb18c3f
Merge branch 'test/UT_master_slave_mode' into 'master'
...
unit-test-app: support multiple devices test cases
See merge request !1220
2017-12-11 15:22:51 +08:00
krzychb
6584bcf62d
Fixed issues identified during review
2017-12-11 08:01:37 +01:00
krzychb
9b847b2903
1. Following https://esp32.com/viewtopic.php?f=14&t=3834 and https://github.com/espressif/esp-idf/issues/1351 updated information regarding selection of the main XTAL frequency. 2. Removed obsolete note about ': not a valid identifier...', as it does not show up anymore with the latests MSYS2 installation.
2017-12-11 07:52:27 +01:00
Ivan Grokhotkov
a99483a727
docs: add information about execution time of ULP instructions
2017-12-11 14:05:41 +08:00
Angus Gratton
dcf94f2189
Merge branch 'bugfix/minor_fixes_github' into 'master'
...
Minor fixes from github
See merge request !1638
2017-12-11 12:51:41 +08:00
Ivan Grokhotkov
ca751648fa
ulp: document the need to wait for RTC to be ready for wakeup
2017-12-11 12:11:46 +08:00
Ivan Grokhotkov
65fa71f565
docs: add description of ULP I2C instructions
2017-12-11 12:11:46 +08:00
krzychb
e99c7c3b50
The WROOM and WROVER family of modules is now extended with ESP-WROOM-32D and ESP32-WROOM-32U
2017-12-08 21:03:05 +01:00
houchenyao
7a31b93fa3
unit-test-app: support multiple devices test cases:
...
current unit-test-app don't support test components need to communicate
with each other (like GPIO, SPI ...). Now we add multiple devices mode
to unit test app, support writing and running test with multiple DUTs.
please refer to `docs/api-guides/unit-tests.rst` for detail.
2017-12-07 13:57:26 +08:00
Ivan Grokhotkov
7e3ac34704
Merge branch 'bugfix/fix_i2s_doc' into 'master'
...
docs: fix i2s code snippet for interrupt flags setting
See merge request !1637
2017-12-07 13:50:49 +08:00
Ivan Grokhotkov
d6525fb3e6
docs: link to FreeRTOS APIs from SMP changes documentation
2017-12-07 12:41:24 +08:00
Ivan Grokhotkov
cda22d9aaf
docs: add FreeRTOS API docs
...
- Use `code` tags instead of a mix of `<pre></pre>` and
`@verbatim .. @endverbatim`
- Remove manually added function prototypes from comment blocks
- Remove of grouping (`\defgroup`) — some extra work is needed
to make groups compatible with the way we auto-generate API
reference from Doxygen XML files. It's pretty easy to add the
grouping directives back if/when we implement support for
Doxygen groups in the later stages of documentation build
process.
- Hide private APIs under `@cond .. @endcond`
- Convert some comments into Doxygen-compatible ones
- Fix various documentation issues: missing documentation for
some parameters, mismatch between parameter names in comment
block and in function prototype.
- Add doxygen comments for functions which didn't have them
(thread local storage).
- Add [out] param tags where necessary
- Redefine `xTaskCreate` and `xTaskCreateStatic` as inline
functions instead of macros.
2017-12-07 12:01:14 +08:00
Ivan Grokhotkov
2b92119840
Merge branch 'bugfix/freertos_check_task_waiting_termination' into 'master'
...
Freertos Task Deletion backport and FPU documentation
See merge request !1591
2017-12-07 11:55:10 +08:00
Paul Reimer
78855211fe
build system: Add *.cc files to list of file extensions compiled by default
...
Merges https://github.com/espressif/esp-idf/pull/1318
2017-12-07 10:17:03 +11:00
Mahavir Jain
2efef48e3e
docs: fix i2s code snippet for interrupt flags setting
...
Signed-off-by: Mahavir Jain <mahavir@espressif.com>
2017-12-06 12:05:11 +05:30
krzychb
062cc89abd
Pin descriptions, overview diagram and board dimensions carried over from ESP32-PICO-KIT_Datasheet_EN.pdf. The datasheet looks redundant and will not be used.
2017-12-05 22:03:38 +01:00
Darian Leung
38afa32cfb
freertos/fix SMP bug with Idle task clean up
...
This commit backports vTaskDelete() behavior from FreeRTOS v9.0.0 which
allows for the immediate freeing of task memory if the task being deleted
is not currently running and not pinned to the other core. This commit also
fixes a bug in prvCheckTasksWaitingTermination which prevented the
Idle Task from cleaning up all tasks awaiting deletion. Each iteration of the Idle
Task should traverse the xTasksWaitingTermination list and clean up all tasks
not pinned to the other core. The previous implementation would cause
prvCheckTasksWaitingTermination to return when encountering a task
pinned to the other core whilst traversing the xTasksWaitingTermination list.
The test case for vTaskDelete() has been updated to test for the bugfix and
backported deletion behavior.
2017-12-05 18:13:56 +08:00
Jiang Jiang Jian
c672fc54fd
Merge branch 'feature/ledc_more_meaningful_parameter_names' into 'master'
...
Provided more meaningful parameter names by renaming 'bit_num' to 'duty_resoluti…
See merge request !1440
2017-12-01 19:33:53 +08:00
krzychb
fe1e1e2f8e
Review comments implemented
2017-12-01 07:29:54 +01:00
Ivan Grokhotkov
f0547d58e4
esp_timer: add documentation, expose profiling option in Kconfig
2017-11-29 11:44:46 +08:00
krzychb
2b010d4bc9
RMT transmitter and receiver overview pictures
2017-11-24 21:33:50 +01:00
Darian Leung
4c13b2f391
docs/ipc documentation
...
This commit updates doxygen comments in the IPC header files and adds an rst
docs page.
2017-11-24 15:31:28 +08:00
Angus Gratton
02304ad83e
Merge branch 'feature/freertos_backported_functions' into 'master'
...
freertos/backport and test v9.0.0 functions
See merge request !1515
2017-11-24 08:49:59 +08:00
Darian Leung
c1d101dd41
freertos/backport and test v9.0.0 functions
...
This commit backports the following features from FreeRTOS v9.0.0
- uxSemaphoreGetCount()
- vTimerSetTimerId(), xTimerGetPeriod(), xTimerGetExpiryTime()
- xTimerCreateStatic()
- xEventGroupCreateStatic()
- uxSemaphoreGetCount()
Functions backported previously
- xTaskCreateStatic()
- xQueueCreateStatic()
- xSemaphoreCreateBinaryStatic(), xSemaphoreCreateCountingStatic()
- xSemaphoreCreateMutexStatic(), xSemaphoreCreateRecursiveMutexStatic()
- pcQueueGetName()
- vTaskSetThreadLocalStoragePointer()
- pvTaskGetThreadLocalStoragePointer()
Unit tests were also written for the functions above (except for pcQueueGetName
which is tested in a separate Queue Registry MR). The original tlsp and del cb test case
was deleted and integrated into the test cases of this MR.
2017-11-23 14:18:09 +08:00
Angus Gratton
4d34251ff3
windows: Update precompiled env link & toolchain in setup script
2017-11-23 11:55:23 +11:00
krzychb
cdad1e8382
Implement review comments
2017-11-22 23:33:29 +01:00
krzychb
2ec35f60ca
RMT API docs update, new example
2017-11-21 22:34:23 +01:00
Ivan Grokhotkov
0f503dee50
toolchain: update to 1.22.0-75-gbaf03c2
...
- enable condition variable support in gthread
- add provisions to allow emergency exception pool size to be configured
2017-11-21 19:30:52 +08:00
Angus Gratton
4b8c90bce0
doc: Unify the two sections about the "dialout" group on Linux
...
An addition to https://github.com/espressif/esp-idf/pull/1158
2017-11-20 16:10:38 +11:00
Simon Werner
17b4973d47
docs: Improved documentation for /dev/ttyUSB0 issues
...
Improved documentation for /dev/ttyUSB0 issues. This occurred in Ubuntu, but I'm sure is applies to most distributions.
Merges https://github.com/espressif/esp-idf/pull/1158
2017-11-17 10:43:02 +11:00
krzychb
d488bb7bac
Provided more meaningful parameter names by renaming 'bit_num' to 'duty_resolution' and 'div_num' to 'clock_divider'
2017-11-15 08:08:12 +01:00
Angus Gratton
b83792f504
Merge branch 'doc/esp_wifi_types' into 'master'
...
docs: Add esp_wifi_types.h items to wifi API reference
See merge request !1320
2017-11-15 15:03:02 +08:00
Angus Gratton
c40dc36814
docs: Remove internal header esp_wifi_crypto_types.h from documentation
2017-11-15 17:40:38 +11:00
Angus Gratton
9a96c8379e
docs: Add introduction section for WiFi, replace boilerplate
2017-11-15 17:40:38 +11:00
Ivan Grokhotkov
09d2791cfd
Merge branch 'feature/spi_variable_len' into 'master'
...
feat(spi_master): add new feature allow use variable command and address field length for the same device.
See merge request !1322
2017-11-14 00:08:50 +08:00
Angus Gratton
36692dbac7
docs: Add esp_wifi_types.h items to wifi API reference
...
Previously only items defined esp_wifi.h in esp_wifi_crypto_types.h
were including in documentation reference.
2017-11-10 11:00:44 -08:00
Ivan Grokhotkov
3eedf3ed18
Merge branch 'bugfix/to_docs_from_github' into 'master'
...
Documentation bugfixes from the github
See merge request !1501
2017-11-10 11:13:25 +08:00
Anton Maklakov
bb4838314c
doc: Add internal links for chapters and fix typos
...
Used 'git grep -i -E "see *\`[^\`]+\`[^_]"' to find the invalid links
2017-11-09 11:45:13 +08:00
krzychb
60f954448c
I2C API documenation update
2017-11-08 23:38:29 +01:00
Ivan Grokhotkov
37169f0f10
Merge branch 'feature/illustrations_with_blockdiag' into 'master'
...
Implement ‘blockdiag - simple block-diagram image generator’ to illustrate docum…
See merge request !1495
2017-11-08 18:54:28 +08:00
krzychb
9cee2f9558
Linked API reference of 'Application Level Tracing' with description in the 'API Guides'
2017-11-07 20:27:19 +01:00
krzychb
3a1521f965
Implement ‘blockdiag - simple block-diagram image generator’ to illustrate documentation with block diagrams, sequence diagrams, activity diagrams and logical network diagrams
2017-11-07 18:17:53 +01:00
Ivan Grokhotkov
a45e9c806d
Merge branch 'bugfix/new_task_watchdog_API_false_trigger' into 'master'
...
feat/New Task Watchdog API
See merge request !1380
2017-11-07 10:43:56 +08:00
Ivan Grokhotkov
f34a56143d
Merge branch 'bugfix/upgrade_sphinx_and_breathe' into 'master'
...
Upgraded Sphinx to latest release 1.6.5 that contains a fix to https://github.co …
See merge request !1476
2017-11-05 21:44:26 +08:00
Darian Leung
9d63e1da4a
New Task Watchdog API (Revert of Revert)
...
This commit reverts the revert on the new task watchdog API. It also
fixes the following bug which caused the reversion.
- sdkconfig TASK_WDT_TIMEOUT_S has been reverted from the unit of ms back to the
unit of seconds. Fixes bug where projects using the new API without rebuilding sdkconfig
would cause the old default value of 5 to be interpreted in ms.
This commit also adds the following features to the task watchdog
- Updated idle hook registration to be compatible with dual core hooks
- Updated dual core hooks to support deregistration for cpu
- Legacy mode has been removed and esp_task_wdt_feed() is now replaced by
esp_task_wdt_reset(). esp_task_wdt_feed() is deprecated
- Idle hooks to reset are now registered/deregistered when the idle tasks are
added/deleted from the Task Watchdog instead of at Task Watchdog init/deinit
- Updated example
2017-11-02 16:47:51 +08:00
Ivan Grokhotkov
67c202f52b
Merge branch 'feature/docs_small_updates' into 'master'
...
Small updates of documentation
See merge request !1443
2017-11-02 14:18:09 +08:00
krzychb
7cc6b3c5ec
Upgraded Sphinx to latest release 1.6.5 that contains a fix to https://github.com/sphinx-doc/sphinx/issues/4041 . Upgraded Breathe to latest release 4.7.3 as well.
2017-10-31 22:57:39 +01:00
He Yin Ling
8ed14791d0
make: add make command print_flash_cmd
2017-10-31 17:42:20 +08:00
krzychb
d637952555
Small updates of documentation
2017-10-31 07:36:55 +01:00
michael
0330ec270a
feat(spi_master): add new feature allow use variable command and address field length for the same device.
...
Closes #654
2017-10-30 19:33:41 +08:00
Angus Gratton
ffeecde9e2
Merge branch 'feature/docs_update_timer_api' into 'master'
...
Timer API docs update, refactored example
See merge request !1316
2017-10-27 13:31:18 +08:00
krzychb
9b7d5d76a7
Timer API docs update, refactored example
2017-10-27 07:13:59 +02:00
esp32de
7c0020bfd0
feat(adc2): append adc2 support and api and the lock with WIFI module
...
append adc support and api
- esp_err_t adc2_config_width(adc_bits_width_t width_bit);
- esp_err_t adc2_config_channel_atten(adc2_channel_t channel, adc_atten_t atten);
- int adc2_get_voltage(adc2_channel_t channel);
2017-10-26 14:35:29 +08:00
Ivan Grokhotkov
9274814268
Merge branch 'feature/esp32_pico_kit_v4_getting_started_guide' into 'master'
...
ESP32-PICO-KIT V4 Getting Started Guide
See merge request !1418
2017-10-23 14:46:04 +08:00
Ivan Grokhotkov
59b7d98fec
Merge branch 'feature/dfs' into 'master'
...
Dynamic frequency scaling
See merge request !1189
2017-10-22 12:34:11 +08:00
krzychb
4d882c1fb7
ESP32-PICO-KIT V4 Getting Started Guide
2017-10-20 22:49:59 +02:00
Ivan Grokhotkov
b6f37bda97
Merge branch 'feature/i2s_built_in_adc' into 'master'
...
feature(I2S-ADC): add ADC mode for I2S.
See merge request !1077
2017-10-20 15:52:56 +08:00
Angus Gratton
47aaf402b8
heap: Add heap_caps_dump() / heap_caps_dump_all() functions
...
Dump the structure of the heap for debugging purposes.
2017-10-20 11:38:24 +08:00
Ivan Grokhotkov
c360f8dece
Merge branch 'bugfix/heap_check_integrity' into 'master'
...
heap: Fix spurious heap_caps_check_integrity() errors in Comprehensive mode
See merge request !1421
2017-10-19 21:30:16 +08:00
Ivan Grokhotkov
8e01b4aef8
Merge branch 'docs/esp32_hooks' into 'master'
...
docs/Added documentation about esp32 hooks
See merge request !1417
2017-10-19 12:32:36 +08:00
Angus Gratton
04188d8ec7
heap: Fix spurious heap_caps_check_integrity() errors in Comprehensive mode
...
Heap was not being locked before poisoning, so heap_caps_check_integrity()
would sometimes race with checking the poison bytes and print unnecessary
errors.
Details: https://esp32.com/viewtopic.php?f=2&t=3348&p=15732#p15732
2017-10-18 15:57:52 +08:00
Darian Leung
461f8da704
docs/Added documentation about esp32 hooks
...
This commit adds documentation about the esp32 Idle and Tick Hooks
2017-10-18 15:19:35 +08:00
Angus Gratton
78f70d4e79
Merge branch 'bugfix/cxx_exceptions' into 'master'
...
Full C++ Exception Support option (& reclaim memory when exceptions disabled)
See merge request !1353
2017-10-18 15:08:10 +08:00
Ivan Grokhotkov
062be56c3c
docs: add power management API reference
2017-10-18 14:37:23 +08:00
Angus Gratton
d20fbffae1
idf_monitor: Demangle C++ names
2017-10-17 14:46:08 +08:00
Angus Gratton
86c89ff169
pthread: Add support for pthread thread local storage
...
Refactors LWIP to use this for the LWIP thread local semaphore
2017-10-17 14:46:08 +08:00
michael
8e31a36562
feat(spi_slave): append trans_len field in trans_desc to show length actually transferred.
2017-10-17 12:01:12 +08:00
Angus Gratton
b013f5d490
Merge branch 'bugfix/freertos_resume_scheduler_pending_tasks' into 'master'
...
freertos: Fix bug with xTaskResumeAll() not resuming all tasks
See merge request !1330
2017-10-16 09:43:04 +08:00
Angus Gratton
ca7485cc9a
freertos: Remove "stop program on scheduler start when JTAG/OCD is detected" option
...
No longer used with new dual core target & JTAG instructions.
2017-10-13 10:54:02 +11:00
Jiang Jiang Jian
8e47c355fa
Merge branch 'feature/i2s_apll' into 'master'
...
driver/i2s: add support apll clock
See merge request !1115
2017-10-12 19:06:50 +08:00
krzychb
f7daaa9ebe
ESP32-PICO-KIT Getting Started Guide
2017-10-11 08:02:23 +02:00
Angus Gratton
3e62c2e052
freertos: When scheduler is disabled, tasks on other core should immediately resume
...
... if triggered by a SemaphoreGive/etc.
Previously they would resume after scheduler was resumed, on next
RTOS tick of other CPU.
2017-10-11 10:48:20 +11:00
Angus Gratton
f2f9170abc
freertos: Fix bug with xTaskResumeAll() not resuming all tasks
...
Previously if multiple tasks had been added to xPendingReadyList for the CPU, only the first one was resumed.
Includes a test case for resuming multiple (pending) tasks on xTaskResumeAll().
Document the limitation that while scheduler is suspended on one CPU, it can't wake tasks on either CPU.
2017-10-11 10:48:20 +11:00
Angus Gratton
dda136eab7
Merge branch 'bugfix/heap_debugging_cleanup' into 'master'
...
Heap debugging docs cleanup & convenience functions
See merge request !1347
2017-10-10 14:59:54 +08:00
Jeroen Domburg
a8131b14b0
Merge branch 'feature/docs_update_uart_api' into 'master'
...
Updated functional overview of UART API documentation
See merge request !1328
2017-10-10 14:06:08 +08:00
Jeroen Domburg
1835c3a213
Merge branch 'feature/docs_update_pcnt_api' into 'master'
...
Extended description of the Pulse Counter API and removed redundant comments from the example
See merge request !1312
2017-10-10 14:06:03 +08:00
Jeroen Domburg
bbbfa64a66
Merge branch 'feature/docs_update_ledc_api' into 'master'
...
Updated example and description of LED PWM Controller API
See merge request !1276
2017-10-10 14:05:57 +08:00
Jiang Jiang Jian
904d6c8f2b
Merge branch 'feature/scan_optimize' into 'master'
...
wifi: scan optimize
See merge request !1334
2017-10-10 13:39:16 +08:00
Angus Gratton
f0d7cfdafe
heap: Add new heap_caps_check_integrity_all() & heap_caps_check_integrity_addr() debugging functions
...
Easier to either check all heaps, or focus on checking a particular region.
2017-10-10 16:19:30 +11:00
Angus Gratton
325bd3a4dc
doc: Rewrite heap debugging docs to add function/struct links & improve actionability
2017-10-10 16:19:29 +11:00
Deng Xin
d515494d1b
wifi: optimize scan feature
...
1. add the threshold of match AP in fast scan
2. add blacklist feature
3. make sure would wrong if password didn't set
4. add scan example
2017-10-10 12:27:02 +08:00
krzychb
9107b47deb
Updated UART API documentation and examples. Included a fix of #1091 from GitHub
2017-10-10 05:54:36 +02:00
hackrid
d63acf6339
linux docs: (Arch) Add key to keyring
...
for me it was necessary to add the key manually to the key ring. Otherwise I could not have installed the packages
Merges https://github.com/espressif/esp-idf/pull/1029
(Amended to remove reference to exact key, references AUR links instead.)
2017-10-09 14:22:56 +11:00
Angus Gratton
d98934d56b
doc: Fix mentions of Cygwin-style paths to Unix-style
...
Cygwin-style is really only /cygpath/xxx and IDF doesn't support these.
Closes https://github.com/espressif/esp-idf/pull/1033
2017-10-09 14:22:53 +11:00
Tuan PM
9d39881981
i2s: add support apll clock
...
using apll_param to setup APLL
new apll calculation method, much faster
validate freq calculation
Ensure that the i2s frequency is greater than the hardware limit
Add description of how to calculate apll clock, support apll for other 16-bits audio, check rev0 chip
correct space
2017-10-06 15:36:24 +07:00
krzychb
d60722c33d
Updated example and descritpion of LED PWM Controller API
2017-10-06 08:34:27 +02:00
Jeroen Domburg
b6a2bd1184
Revert "esp32: New Task Watchdog API"
...
This reverts commit 616baa239d
.
2017-09-30 18:07:19 +08:00
Darian Leung
616baa239d
esp32: New Task Watchdog API
...
Legacy API of task watchdog used the same function esp_task_wdt_feed() to add
and feed a task. This caused issues of implicitly adding a task to the wdt list
if the function was used in shared code.
The new API introduces init, adding, feeding, deleting, deinit functions. Tasks
must now be explicitly added to the task watchdog using their handles. Deletion
must also be explicit using task handles. This resolves the issue of implicit
task additions to the task watchdog due to shared code calling
esp_task_wdt_feed().
Task watchdog is now fully configurable at runtime by calling the init and
deinit functions.
Also added functions to get the handles of idle tasks of the other core. This
helps when adding idle tasks to the watchdog at run time.
Configuring the task watchdog using menu config is still available, however
menu config will only result in calling the init and add functions for idle
tasks shortly after the scheduler starts.
Menu config also allows for using legacy behavior, however the legacy behavior
willcall the new API functions but with slight variations to make them legacy
compatible.
Documentation and example have also been updated
gcov_rtio.c headers updated to prevent error of freertos header files being
included in the wrong order.
Resolves issue TW#13265
2017-09-29 23:10:55 +08:00
Jeroen Domburg
740f8a79f0
Add logic to make external RAM usable with malloc()
2017-09-28 17:17:50 +08:00
krzychb
e69691427c
Extended description of the Pulse Counter API and removed redundant comments from the example
2017-09-26 22:44:46 +02:00
Ivan Grokhotkov
bbab9ecf23
Merge branch 'feature/docs_update_sigmadelta_api' into 'master'
...
Updated sigma delta API documenation and example
See merge request !1319
2017-09-26 16:05:18 +08:00
Angus Gratton
01aad8f386
Merge branch 'feature/docs_updating_idf' into 'master'
...
Added a section how to update existing local esp-idf repository and load specifi…
See merge request !1273
2017-09-26 10:34:38 +08:00
krzychb
b5e4c76bfe
Updated sigma delta API documenation and example
2017-09-25 21:31:09 +02:00
Angus Gratton
1773770f44
Merge branch 'feature/multi_heap_assert' into 'master'
...
multi_heap: Print the problem address when aborting due to heap corruption
See merge request !1277
2017-09-25 09:51:14 +08:00
Angus Gratton
022d949ccf
Merge branch 'doc/windows_env_updates' into 'master'
...
doc: Add steps to update Windows environment installations
See merge request !1298
2017-09-22 06:39:26 +08:00
Jeroen Domburg
c54a9ff40a
Merge branch 'docs/FreeRTOS_SMP_Changes' into 'master'
...
docs: Added documentation for FreeRTOS SMP changes
See merge request !1238
2017-09-21 17:10:33 +08:00
Darian Leung
6ab552a6ea
docs: Added documentation for FreeRTOS SMP changes
...
Added documentation about the ESP-IDF changes to FreeRTOS.
The documentation covers changes to the following FreeRTOS aspects.
- Task Creation
- Affects on scheduling (Task skipping, scheduler suspension, tick synchronicity)
- Critical sections and disabling interrupts
- Thread Local Storage Pointers and deletion callbacks
- Configuring ESP-IDF FreeRTOS
2017-09-21 16:40:57 +08:00
Angus Gratton
ab531c0b48
doc: Add steps to update Windows environment installations
2017-09-21 16:57:06 +10:00
dziekon
e822b37883
Fix CDT GCC parser to correctly parse C++ commands
...
Previously suggested parser command pattern:
xtensa-esp32-elf-(g?cc)|([gc]\+\+)|(clang)
was incorrect for compilation of c++ files, as it is expanded by Eclipse into or between:
xtensa-esp32-elf-(g?cc)
([gc]\+\+)
(clang)
Additional grouping around existing pattern solves that issue, and helps Eclipse to correctly find ESP-IDF includes.
Merges https://github.com/espressif/esp-idf/pull/1005
2017-09-20 12:06:23 +10:00
Angus Gratton
0db01b4a4d
windows: Update windows prereq script & precompiled environment download
2017-09-18 18:26:57 +10:00
Angus Gratton
76d8190444
multi_heap: Print the problem address when aborting due to heap corruption
...
New multi_heap code has proven effective at aborting when buffer overruns occur,
but it's currently hard to debug the stack traces from these failures.
2017-09-18 16:54:23 +10:00
Ivan Grokhotkov
7551e1d310
make,docs: update toolchain to 1.22.0-72-g4d49225
2017-09-18 10:32:44 +08:00
krzychb
6fa62ca604
Added a section how to update existing local esp-idf repository and load specific release. Inspired by issues #990 and #997
2017-09-15 19:54:36 +02:00
Wangjialin
2fceec4d85
feature(I2S-ADC): add ADC mode for I2S.
...
1. Support built-in ADC for I2S.
2. Modify code of ADC, made no change to the original APIs.
3. Add APIs in I2S:
esp_err_t i2s_set_adc_mode(adc_unit_t adc_unit, adc1_channel_t adc_channel);
4. Add I2S ADC/DAC example code.
5. add old-fashion definition to make it more compatible
6. replase spi_flash_ APIs with esp_partition_ APIs
7. add example of generating audio table from wav
8. change example sound
2017-09-14 13:24:08 +08:00
Angus Gratton
4b8aa9e20d
ci: Add new check_doc_warnings.sh script, pre-process log lines
...
* Fixes issue in !1250 when IDF_PATH changes on build runner
* Allows checking document warnings before CI run
* Will be robust to line number changes in document files
2017-09-14 13:46:35 +10:00
Ivan Grokhotkov
b2adaf2a4c
Merge branch 'feature/docs_adc_api_reference' into 'master'
...
More details added to description of ADC API
See merge request !1240
2017-09-14 10:49:12 +08:00
krzychb
53fde7842e
Resolved docs formatting issues that sneak into documentation with MR 1061
2017-09-13 21:00:48 +02:00
Jiang Jiang Jian
33a4a6a510
Merge branch 'feature/add_espnow' into 'master'
...
add ESPNOW feature
See merge request !1061
2017-09-13 20:32:53 +08:00
Ivan Grokhotkov
dfaf166436
Merge branch 'feature/toolchain-update' into 'master'
...
Toolchain update
See merge request !1204
2017-09-13 18:05:09 +08:00
Angus Gratton
61e3a5bd16
windows: Update toolchain & MSYS package download links
2017-09-13 17:27:47 +08:00
Ivan Grokhotkov
5586b4b799
Update toolchain download links
2017-09-13 17:27:47 +08:00
Ivan Grokhotkov
d7fb4a71a0
Merge branch 'feature/fail_build_on_sphinx_warning' into 'master'
...
Fail CI build on Sphinx warnings
See merge request !1228
2017-09-12 13:49:11 +08:00
krzychb
59792bb2c3
Fail CI build on Sphinx warnings
2017-09-12 07:12:57 +02:00
XiaXiaotian
e4ba31a8b9
add ESPNOW feature
...
ESPNOW is a kind of WiFi communication bettween WiFi devices, no
matter they are connected to each other or not. Once two WiFi
devices are paired, they can send data to or receive data from
each other. The data is transmitted in action frame which can
be encrypted with CCMP method. ESPNOW also support mutilcast frame
transmitting.
2017-09-12 12:12:13 +08:00
krzychb
31eda99136
More detailed description of ADC API
2017-09-11 21:00:09 +02:00
me-no-dev
dd87deb278
Add SPIFFS Component to IDF
2017-09-11 19:56:40 +03:00
Ivan Grokhotkov
1e7c3854d3
Merge branch 'bugfix/warn_on_invalid_xtal_freq' into 'master'
...
soc/rtc: warn if detected XTAL frequency does not match configured one
See merge request !1242
2017-09-11 18:15:11 +08:00
Ivan Grokhotkov
de038f502c
Merge branch 'feature/gpio_channel_macro' into 'master'
...
feat(global): add macros for GPIO->channel lookup
See merge request !1170
2017-09-11 12:15:08 +08:00
Ivan Grokhotkov
5a88f90a33
soc/rtc: warn if detected XTAL frequency does not match configured one
...
Since 9a8c0392
, XTAL frequency is set to 40MHz by default, and users
of 26MHz boards need to select 26MHz manually. Most users are not aware
of this change, and existing getting started guides do not mention that
XTAL frequency needs to be set for some boards. So users are left with
garbage output from UART without any clue what to check.
This change adds a warning in case specific XTAL frequency was set, and
it does not match automatically detected one. This should help users
fix the issue.
2017-09-11 11:42:26 +08:00
Ivan Grokhotkov
050ae50e83
Merge branch 'bugfix/docs_broken_links' into 'master'
...
Fixed broken links in documentation
See merge request !1230
2017-09-08 12:06:43 +08:00
Ivan Grokhotkov
e12967297d
Merge branch 'feature/docs_touch_pad_api' into 'master'
...
Touch Pad driver overview
See merge request !1195
2017-09-08 11:55:27 +08:00
krzychb
b69379941b
Fixed broken links in documentation
2017-09-07 18:48:15 +02:00
Ivan Grokhotkov
40df6546c0
Merge branch 'feature/multi_heap_poisoning' into 'master'
...
Heap tracing & poisoning features
See merge request !749
2017-09-07 17:47:51 +08:00
Ivan Grokhotkov
b9dfb437ab
Merge branch 'bugfix/intr_free' into 'master'
...
fix(intr): fix the logic for allocating and freeing interrupts.
See merge request !1124
2017-09-07 17:45:18 +08:00
Angus Gratton
72995bfcec
doc: Add docs for heap trace & poisoning
2017-09-07 16:32:05 +10:00
michael
08b9fbc242
feat(global): add macros for GPIO->channel lookup
...
including: macros for dac, adc, touch, rtc_gpio, uart and clk_out.
TW#13970
2017-09-07 10:40:25 +08:00
Angus Gratton
4809c70899
Merge branch 'feature/register_heaps_runtime' into 'master'
...
heap: Support adding new heap regions at runtime
See merge request !1159
2017-09-07 10:18:21 +08:00
michael
c82e51cf79
fix(intr): always assign the same intr to a same source, disable the source only when all the handlers disabled.
...
also document handlers sharing a same source.
TW#13454, https://github.com/nodemcu/nodemcu-firmware/issues/1874
Breaking change: handles assigned to a same source should have the same flag now.
2017-09-06 15:20:01 +08:00
krzychb
672390c458
Mass replacement of http with https urls, fixed broken urls
2017-09-06 08:16:01 +02:00
krzychb
73297f1aa3
Separate section on touch detection
2017-09-05 20:43:15 +02:00
krzychb
7c7d29dc4a
Implemented 2 of 3 review comments
2017-09-05 08:28:44 +02:00
krzychb
ba42c46cb3
Touch Pad driver overview
2017-09-05 08:28:44 +02:00
Angus Gratton
5f3cb9f9dc
build system: Document --warn-undefined-variables and add a config item for it
2017-09-05 16:11:03 +10:00
Angus Gratton
5361c08989
heap: Support adding new heap regions at runtime
...
To facilitate this, the list of registered heap regions is now a linked list
(allowing entries to be appended at runtime.)
2017-09-05 14:07:02 +10:00
Ivan Grokhotkov
d2acf1ce77
sleep: add light sleep, factor out APIs common for deep/light sleep
2017-09-01 10:36:14 +08:00
lf
f77020ee5f
Add quotes to PATH declarations
...
This is necessary in case someone has a space in their PATH variable (which is within the realm of possibility)
Merges https://github.com/espressif/esp-idf/pull/800
2017-08-30 17:55:00 +10:00
Patrick Hobusch
76cb1bac2b
Fix distinction between shared and non-shared interrupts in docs
...
Merges https://github.com/espressif/esp-idf/pull/701
2017-08-30 17:55:00 +10:00
Jeroen Domburg
a1b5813049
Merge branch 'feature/adc_calibration' into 'master'
...
esp_adc_cal component
See merge request !1084
2017-08-30 10:00:19 +08:00
Angus Gratton
8bd6feedd4
Merge branch 'bugfix/docs_updates' into 'master'
...
Removed redundant 'Logging to Host' and docs cleaning
See merge request !1158
2017-08-30 09:43:00 +08:00
krzychb
8c3169b6be
Removed redundant 'Logging to Host' and docs cleaning
2017-08-29 20:47:10 +02:00
Darian Leung
88b05f9391
esp_adc_cal: Added ADC calibration component
...
Added component containg API that is able to correct raw ADC readings
into a voltage in mV. Also provided a helper function that combines
the process of getting the raw ADC1 reading then converting it to a
voltage in mV. In doing so, the adc1_get_voltage() function of the ADC
driver has been deprecated. Instead there is now adc1_get_raw to obtain
the raw ADC1 reading, and adc1_to_voltage() that gets the raw reading
and converts all in one function. Functions using the deprecated
adc1_get_voltage() have also been updated to use adc1_get_raw().
Conversion is based on ADC characteristics. The characteristics are based
on the ADC's v_ref, herefore the appropriate structure and functions have
been provided to obtain the ADC characteristics.
The existing ADC driver has also been modified by adding a function to
route the internal ADC reference voltage to a GPIO allowing users to measure
it manually.
Relevant documentation has also been updated
2017-08-29 18:43:14 +08:00
Ivan Grokhotkov
3161854efb
Merge branch 'bugfix/spi_hd_rx' into 'master'
...
fix(spi_dma_rx): add check to avoid using SPI half-duplex mode DMA with both MOSI and MISO phases.
See merge request !1111
2017-08-28 17:36:58 +08:00
michael
2554f61f05
doc(spi master): documents updated for several limitations.
2017-08-26 02:15:32 +08:00
Ivan Grokhotkov
631f552489
sdmmc: don't use high speed mode with SD over SPI
...
Disabling due to limitation of SPI driver (max 26MHz for full-duplex
mode over GPIO matrix)
2017-08-25 14:33:19 +08:00
Jeroen Domburg
1862736c3a
Merge branch 'bugfix/the_esp-wrover-kit_identity' into 'master'
...
ESP-WROVER-KIT now integrates the ESP32-WROVER module by default.
See merge request !1096
2017-08-24 14:33:34 +08:00
Ivan Grokhotkov
cc96234bb8
Merge branch 'feature/docs_esp32-wrover_info' into 'master'
...
docs: Included information about ESP32-WROVER module
See merge request !1107
2017-08-24 14:30:06 +08:00
Wang Jia Lin
f1ecffb46c
Merge branch 'bugfix/touch_pad_driver' into 'master'
...
driver(touch): fix bug and add more features
See merge request !1056
2017-08-23 19:12:39 +08:00
krzychb
173cce2850
docs: Included information about ESP32-WROVER module
2017-08-22 20:08:04 +02:00
Wangjialin
842caaab21
driver(touch): fix bug and add more features
...
1. add sens_struct.h
2. add definition of RTCCNTL and RTCIO
3. modify touch pad examples
4. update example code.
5. add comments add option in menuconfig
6. fix issue that pad index 8 and 9 are mismatched
7. add touch_pad_read_filtered() api to get value filtered by iir filter
8. modify touch pad isr func
9. Make the items in perihperal.ld in the sequence of address
10. delete Kconfig for touch pad
11. add touchpad filter APIs to adjust the filter
12. add touch_pad into index.rst
13. add touch_pad in Doxyfile
14. add touch_pad.rst
2017-08-22 21:21:39 +08:00
Ivan Grokhotkov
908f94c8e9
docs: wifi: use list instead of nested table
...
Latex backend does not support nested tables, which caused documentation
build to fail on readthedocs.
2017-08-22 15:12:35 +08:00
Ivan Grokhotkov
430cf3e9b3
docs: link to Kconfig options documentation
2017-08-22 15:12:35 +08:00
Ivan Grokhotkov
a2f4f2999d
docs: generate documentation for Kconfig options
...
This adds a simple script which parses Kconfig files using Kconfiglib
and emits ReST document with the list of all options. For each option
a link target is generated, to make it possible to link to any Kconfig
option from the rest of the documentation.
Since Kconfiglib is not on PyPI, the latest version (45f87b9d) is
bundled into the docs directory.
2017-08-22 15:12:34 +08:00
Ivan Grokhotkov
5de7c91a54
add console component and example
2017-08-21 15:58:27 +08:00
krzychb
f2ce3e8678
ESP-WROVER-KIT now integrates the ESP32-WROVER module by default. But it is still compatible with both ESP-WROOM-32 and ESP32-WROVER. The latest baseboard is still V3. The original 'ESP-WROVER-KIT' that integrates ESP-WROOM-32 is unlikely to be produced any longer, while the original 'ESP-WROVER-KIT-RVB' is renamed as “ESP-WROVER-KIT” and in mass production.
2017-08-19 21:16:00 +02:00
Ivan Grokhotkov
bfb15c6fc9
Merge branch 'bugfix/docs_app_trace_lib' into 'master'
...
Update of "Application Level Tracing library" documentation to reflect "esp32" target
See merge request !1081
2017-08-16 19:12:51 +08:00
Ivan Grokhotkov
44f5b9f78d
Merge branch 'bugfix/docs_datasheet_link_fix' into 'master'
...
Fix the wrong link of the datasheet
See merge request !1100
2017-08-16 19:11:43 +08:00
krzychb
b0b323df37
Included 'Introduction' from original 'Get Started' PDF
2017-08-14 08:06:42 +02:00
krzychb
fe80e1a595
Fixed Breathe release because 'latest' introduces errors
2017-08-09 19:09:59 +02:00
krzychb
00a81564f0
Merge branch 'master' of https://gitlab.espressif.cn:6688/idf/esp-idf into feature/docs_setup_sphinx
2017-08-09 18:46:43 +02:00
Ivan Grokhotkov
43b81c8f11
Merge branch 'feature/fast_crypto_used_in_supplicant' into 'master'
...
Add the fast crypto function in supplicant, relate to the task tw13712
See merge request !1075
2017-08-09 21:55:05 +08:00
Deng Xin
57bc38d867
Add the fast crypto function in supplicant
...
optimize the speed when do wifi connect
2017-08-09 21:36:13 +08:00
Anton Maklakov
3a608a359d
doc: Fix the wrong link
2017-08-09 18:41:02 +08:00
Ivan Grokhotkov
b8b553d122
Merge branch 'feature/docs_build_openocd_windows' into 'master'
...
Provided instruction to build OpenOCD from sources using MSYS2
See merge request !1062
2017-08-09 13:17:35 +08:00
Ivan Grokhotkov
142f4ac071
Merge branch 'feature/docs_wrover_kit_description' into 'master'
...
Updated desription of ESP-WROVER-KIT features in getting started guide, changed …
See merge request !1064
2017-08-09 13:17:19 +08:00
krzychb
ca5065c66c
Trace collection command examples
2017-08-05 16:54:58 +02:00
krzychb
485518cb59
Target change, clarifications and formatting updates
2017-08-04 22:17:31 +02:00
Ivan Grokhotkov
d286d2f647
Merge branch 'feature/apptrace_api_ext' into 'master'
...
esp32: Apptrace API enhancement
See merge request !1021
2017-08-02 14:34:42 +08:00
krzychb
b1fcfca987
Updated desription of ESP-WROVER-KIT features in getting started guide, changed link to JTAG Debugging
2017-08-02 06:57:28 +02:00
krzychb
2e94b51b9c
Instructions how to setup tools and build documentation locally
2017-08-02 06:33:55 +02:00
krzychb
d5119dd529
Provided instruction to build OpenOCD from sources using MSYS2
2017-08-02 06:10:44 +02:00
Ivan Grokhotkov
dce7fcb90d
Merge branch 'bugfix/sdspi_docs' into 'master'
...
Fix SD SPI docs
See merge request !1058
2017-07-28 16:03:45 +08:00
Ivan Grokhotkov
3bd6194c58
Merge branch 'feature/docs_jtag_debugging' into 'master'
...
Update and extension of Debugging documentation
See merge request !850
2017-07-27 22:03:45 +08:00
Ivan Grokhotkov
770b9e3b9e
docs: fix warnings related to SD SPI documentation
2017-07-27 20:43:26 +08:00
Ivan Grokhotkov
d4982e0b64
docs: temporary downgrade Sphinx to 1.5.6 to work around Breathe issue
2017-07-27 20:43:26 +08:00
Ivan Grokhotkov
046b2c0aa4
docs: add OpenOCD/JTAG instructions for macOS
2017-07-27 20:25:56 +08:00
Jeroen Domburg
09c8851b8d
Merge branch 'feature/esp-wrover-kit-rvb_note' into 'master'
...
Add a note what is different about ESP-WROVER-KIT RVB
See merge request !1008
2017-07-26 16:12:58 +08:00
krzychb
f50fd070c9
Updated links to binary distributions of OpenOCD
2017-07-26 14:53:54 +08:00
Alexey Gerenkov
7d86f167ee
docs: Flashing over JTAG was added
2017-07-26 14:53:48 +08:00
krzychb
1fb85b494c
JTAG Debugging - revamping of Debugging documentation
2017-07-26 14:53:43 +08:00
Ivan Grokhotkov
002f38fa8f
Merge branch 'feature/sdspi_driver' into 'master'
...
SD SPI mode driver
This MR adds functionality to support SD cards connected via SPI interface.
Additionally, two bugs are fixed:
- Definition of `SPI_TRANS_MODE_DIOQIO_ADDR` in spi_master driver
- SD card probing frequency was 4000kHz instead of 400kHz as required by the standard
See merge request !727
2017-07-26 13:51:37 +08:00
Alexey Gerenkov
60c45ae2c4
Updated acc to comments
2017-07-24 20:07:21 +03:00
Alexey Gerenkov
c2c9149a24
esp32: Apptrace API enhancement
...
- User down buffer configuration support
- bugfix: ring buf - avalable write size undeflow
- SysView down buf support updated
2017-07-24 19:57:44 +03:00
Liu Zhi Fu
508855538e
docs: add wifi.rst
...
Add more documents about WiFi API/Event Mechanism/State Machine etc
2017-07-24 10:20:06 +08:00
Dmitry Yakovlev
e5bb45f381
driver: SD protocol driver for SPI peripheral
2017-07-20 13:43:07 +08:00
Angus Gratton
d664e32394
build system: Use component.mk for all components, refactor bootloader build
...
For config-only components, component.mk should now contain "COMPONENT_CONFIG_ONLY := 1"
Also refactored some of the generation of linker paths, library list. This required cleaning up the way the bootloader
project works, it's now mostly independent from the parent.
2017-07-19 09:10:48 +10:00
Angus Gratton
5492ba759a
build system docs: Add some notes about project-level variables
2017-07-19 09:07:53 +10:00
Angus Gratton
2571e66a29
build system: Make component searching more explicit, obsolete SRCDIRS
...
Each COMPONENT_DIRS directory can now either be a component directory, or a parent directory containing component
subdirectories.
When searching for components, skip any directory which doesn't have component.mk, Kconfig.projbuild, or
Makefile.projbuild in it. This helps with debugging, list-components output, etc.
2017-07-19 09:07:53 +10:00
Angus Gratton
2c1fe6663d
build system: Add list-components target for debugging component discovery
2017-07-19 09:07:53 +10:00
Ivan Grokhotkov
0ae916d555
Merge branch 'feature/high_level_interrupts' into 'master'
...
Break out high-level interrupts so a component can override them
See merge request !675
2017-07-18 10:42:31 +08:00
krzychb
d3788b0db1
Add a note what is different about ESP-WROVER-KIT RVB
2017-07-17 07:16:31 +02:00
Angus Gratton
b71f47670f
doc: Move romconsole doc sub-headings to sub-headings
...
Removes them from the API guides ToC.
2017-07-13 14:33:29 +08:00
Angus Gratton
71c70cb15c
heap: Refactor heap regions/capabilities out of FreeRTOS
...
Remove tagged heap API, rename caps_xxx to heap_caps_xxx
Also includes additional heap_caps_xxx inspection functions.
2017-07-10 17:46:03 +08:00
Jeroen Domburg
6cf6f43ac5
Merge branch 'feature/update_wrover_v3' into 'master'
...
docs: layout of esp-wrover-kit updated to v3
See merge request !929
2017-07-07 14:16:36 +08:00
Jeroen Domburg
1d748db209
Break out high-level interrupts so a component can override them
2017-07-07 12:51:33 +08:00
Ivan Grokhotkov
0087b887ae
docs: update general notes section on IRAM/ISRs
...
- Remove outdated note that all ISRs should be in IRAM
- Replace “ISR handler” with “ISR” or “interrupt handler”
2017-07-06 10:47:18 +08:00
Ivan Grokhotkov
cd1b6abc8c
docs: fix flash encryption key storage block, use same names as in TRM
2017-07-06 10:47:18 +08:00
krzychb
9bb4dac3d2
Layout of esp-wrover-kit updated to v3
2017-07-05 21:21:54 +02:00
Jeroen Domburg
50e486f9eb
Some documentation for the undocumented ROM console.
2017-06-29 19:01:50 +08:00
Ivan Grokhotkov
9b955f4c9f
Merge branch 'feature/sysview_via_apptrace' into 'master'
...
sysview via apptrace
See merge request !708
2017-06-29 08:40:13 +08:00
Alexey Gerenkov
8d43859b6a
esp32: SEGGER SystemView Tracing Support
...
Implements support for system level traces compatible with SEGGER
SystemView tool on top of ESP32 application tracing module.
That kind of traces can help to analyse program's behaviour.
SystemView can show timeline of tasks/ISRs execution, context switches,
statistics related to the CPUs' load distribution etc.
Also this commit adds useful feature to ESP32 application tracing module:
- Trace data buffering is implemented to handle temporary peaks of events load
2017-06-27 20:52:43 +03:00
Angus Gratton
906a61d9ee
docs: Add some notes about Windows COM ports, serial port drivers
2017-06-27 10:06:29 +10:00
krzychb
1015780931
Pin List has been moved to the Datasheet, fixed links
2017-06-21 08:13:42 +02:00
krzychb
9edf376bc3
Fixed link to JTAG Debugging for ESP32
2017-06-19 22:42:22 +02:00
Angus Gratton
d2bada24dc
Merge branch 'feature/add_wrover_kit_v3_doc' into 'master'
...
Add WROVER-KIT v3 hw to hw reference
See merge request !818
2017-06-19 08:59:20 +08:00
Ivan Grokhotkov
643aa41953
Merge branch 'bugfix/doc_adding_to_path' into 'master'
...
Fixed adding to PATH and setting up IDF_PATH procedures, ref. issue report #656
See merge request !807
2017-06-14 09:16:58 +08:00
Ivan Grokhotkov
af1bec4625
Merge branch 'bugfix/ulp_fixes' into 'master'
...
Minor fixes for ULP
See merge request !800
2017-06-14 09:12:55 +08:00
krzychb
a8075df8dc
Fixed procedures, ref. issue report #656
2017-06-11 21:17:03 +02:00
Angus Gratton
d00b2428bb
Merge branch 'feature/doc_note_about_component_search_order' into 'master'
...
Add a note about handling of same-named components in different component search paths
See merge request !788
2017-06-06 14:36:33 +08:00
Jeroen Domburg
35dae5dff5
Add ESP-WROVER-KIT v3 to the hw reference
2017-06-05 12:59:59 +08:00
Jeroen Domburg
764a70752a
Use Unix line ends
2017-06-05 12:34:54 +08:00
jack
fc130fba86
fix bug that files missing commit in MR 773
2017-05-31 19:37:39 +08:00
Ivan Grokhotkov
3a787c4830
ulp: fix macro names in documentation
2017-05-31 18:23:24 +08:00
Ivan Grokhotkov
7abd9bc023
ULP: remove deprecated cycle_sel field from ADC instruction
...
Cycle_sel field was never used in binutils and was always set to zero.
This change removes it from documentation and examples.
Needs ULP binutils with this change:
https://github.com/espressif/binutils-esp32ulp/commit/af79434
2017-05-31 18:22:48 +08:00
Angus Gratton
034d37b9cb
Merge branch 'bugfix/doc-small-updates' into 'master'
...
Small fixes/updates to toolchain installation procedures
See merge request !782
2017-05-29 07:09:47 +08:00
Jeroen Domburg
e0ac345fd2
Add a note about handling of same-named components in different component search paths
2017-05-25 19:45:59 +08:00
Jeroen Domburg
79ca00af49
Add cleaner way to conditionally compile files
2017-05-25 16:12:27 +08:00
krzychb
d12f871be6
Small fixes/updates to toolchain installation procedures
2017-05-25 08:01:42 +02:00
zhiweijian
4ffb4911e1
gatt_server example receive prepare write
2017-05-22 10:33:36 +08:00
krzychb
30edcca1fb
docs: Generate Doxygen directives for API documentation
...
This is to resolve issue reported in https://github.com/espressif/esp-idf/issues/130 .
2017-05-19 18:26:02 +02:00
Ivan Grokhotkov
98e15df7f6
examples: add ULP ADC example
2017-05-16 13:15:02 +08:00
Jiang Jiang Jian
a6608648db
Merge branch 'driver_merge_tmp/mcpwm' into 'master'
...
feature: Motor Control PWM(mcpwm) driver and examples
See merge request !698
2017-05-12 18:21:38 +08:00
Wangjialin
1f055d28b8
Driver update: I2S pdm and built-in DAC
...
1. Modify I2S DAC built-in mode settings
2. Add I2S pdm mode
3. Correct I2S signal index in full-duplex mode
4. Modify dac output function
5. Add dac pad init functions
6. Modify DAC documentation
7. Add i2s_set_dac_mode API
2017-05-12 16:21:02 +08:00
Kewal M Shah
2008f4d88c
feature: add Motor Control PWM(mcpwm) driver
...
1. Name change from chopper to carrier, block diagram update, minor changes to example codes
2. mcpwm_reg.h changed, brought uniformity in comments, worked on suggestions, duty to accept float. Some name changes!
3. Minor readme changes and Indetation
4. Minor change: move mcpwm_reg.h and mcpwm_struct.h to new path
5. Minor change: addition of BLDC example code and Readme
6. Name changed from epwm to mcpwm
7. Improve the reg name in mcpwm_struct.h
8. Name change chopper>carrier, deadband>deadtime
2017-05-12 15:47:59 +08:00
XiaXiaotian
b22067a8f0
Optimize configuration of base MAC address
...
Application developer can call APIs to configure base MAC address
instead of using menuconfig.
2017-05-10 10:15:07 +08:00
Ivan Grokhotkov
04eb6f6129
Merge branch 'feature/save_esptool_flash_args' into 'master'
...
CI: save download config in CI build jobs:
IDF built app download config may change with some modification.
save the download configs for built APP in build stage.
then we can use the correct download config in test stage.
See merge request !676
2017-05-08 15:48:28 +08:00
zhiweijian
71401bc9b3
Component/bt:add API to prepare write descriptor for gattc
2017-05-05 18:08:47 +08:00
zhiweijian
fb45ee7a4c
Component/bt: add new cmd for blufi ,ESP32 close a gatt connection
2017-05-04 20:31:58 +08:00
He Yin Ling
6c5e60943e
build: add document about how to save flash args
2017-05-02 13:17:57 +08:00
krzychb
1a19747678
Getting started guides
2017-04-27 19:51:42 +02:00
Jeroen Domburg
46fa2cfb46
Merge branch 'feature/spi_slave' into 'master'
...
Split common SPI stuff out of master driver; add slave driver; add workaround for DMA issue.
This merge req mainly adds a slave device. In order to do this, the original master driver is refactored into common code shared by master and slave modes, and a slave driver is added.
The other things added are:
- Added a workaround for a 'feature' of the ESP32 silicon that can lock up the receive DMA channel in some situations. This can only be fixed by resetting *both* DMA channels. The workaround implemented makes sure that the reset only happens when both channels are idle
- Got rid of the automatic choice between register- and DMA-based transfers. The master (and slave) code will now always go for a DMA transfer if a DMA channel is given, and always go for register-based transfers if no DMA channel is given.
- Add in a bunch of fixes for outstanding Github issues.
See merge request !659
2017-04-27 12:28:42 +08:00
Jeroen Domburg
4c06dca15c
SPI: Small fixes according to MR comments
2017-04-27 11:49:04 +08:00
Jeroen Domburg
e9c372bc2d
SPI: Split common SPI stuff out of master driver; add slave driver; add workaround for DMA issue.
2017-04-27 11:49:04 +08:00
Ivan Grokhotkov
b540322dc1
Merge branch 'feature/wear_levelling' into 'master'
...
wear levelling
This MR adds wear levelling component. It presents an interface similar to the interface of spi_flash and esp_partition. Inside, it stores data inside a partition to in a way that reduces worst case number of erase cycles for any given sector.
Also included are APIs similar to the ones provided for SDMMC to mount FAT filesystem on top of the wear levelling partition. A simple example shows how this API can be used.
Ref TW10338.
See merge request !567
2017-04-25 19:46:11 +08:00
Angus Gratton
453b5ded1d
ethernet: Add convenience functions esp_eth_smi_wait_value() & esp_eth_smi_wait_set()
...
Covers the common case of waiting for a particular PHY register to have a particular value.
2017-04-20 18:03:00 +10:00
Angus Gratton
453722ba54
ethernet: Refactor PHY support to be part of ethernet component
...
Move generic PHY support into its own interface
2017-04-20 18:03:00 +10:00
Ivan Grokhotkov
52b51df859
add wear_levelling component and example
2017-04-17 11:01:17 +08:00
Yulong
c6a516f122
component/bt:move the btdm_rebase_ssp_api branch to this branch
2017-04-13 10:14:28 -04:00
Jiang Jiang Jian
6ace4f6fa4
Merge branch 'feature/btdm_avrc' into 'master'
...
Feature/btdm avrc
The source branch "feature/btdm_avrc" includes classic Bluetooth profiles A2DP(sink role) and AVRCP(controller role);
Menuconfig options to control whether to enable classic BT is added.
See merge request !591
2017-04-13 14:36:58 +08:00
Ivan Grokhotkov
7a4fffca24
Merge branch 'bugfix/doc_update_for_centos' into 'master'
...
Update manual for CentOS
Actualize information about dependencies on CentOS 7
See merge request !649
2017-04-12 10:39:35 +08:00
Anton Maklakov
a4a0ccdce3
doc: Update manual for CentOS
2017-04-11 17:59:47 +08:00
Alexey Gerenkov
0860f46220
spi_flash: Fixed bug in SPI flash ROM driver to work with embedded flash chip
...
1) fixed SPI_read_status: added check for flash busy flag in matrix mode
2) fixed SPI_page_program: enable write before writing data to SPI FIFO
3) SPI flash ROM funcs replacement is controlled via menuconfig option
2017-04-11 10:51:19 +08:00
wangmengyang
ccfe4fefeb
component/bt: implement classic Bluetooth profiles A2DP(sink) and AVRCP(controller)
2017-04-10 16:12:21 +08:00
wangmengyang
dbd4e0522e
Merge branch 'master' into feature/btdm_avrc
2017-04-06 14:59:58 +08:00