morris
454d658309
rgb_lcd: workaround pclk polarity bug by setting mo>=2
2022-07-21 13:06:09 +00:00
laokaiyao
edee3ee3cd
i2s: add slot sequence table
...
Closes: https://github.com/espressif/esp-idf/issues/9208
When I2S is configured into different modes, the slot sequence varies.
This commit updates slot sequence tables and corresponding descriptions
in (both code and programming guide).
2022-07-21 15:52:39 +08:00
laokaiyao
90866e99fb
i2s: add basic examples for STD/TDM/PDM mode
2022-07-21 15:52:39 +08:00
morris
4154eaec93
sdm: clean up soc/hal/ll code
2022-07-20 14:59:50 +08:00
Song Ruo Jing
4734b1433b
Merge branch 'bugfix/gpio_hal_coverity_fix' into 'master'
...
gpio: Fix ESP32S3 GPIO48 does not support hold function bug and Fix coverity report
Closes IDF-4901
See merge request espressif/esp-idf!18805
2022-07-19 21:37:15 +08:00
Armando (Dou Yiwen)
9f6f61345b
Merge branch 'feature/adc_driver_ng' into 'master'
...
ADC Driver NG
Closes IDF-4560, IDF-3908, IDF-4225, IDF-2482, IDF-4111, IDF-3610, IDF-4058, IDF-3801, IDF-3636, IDF-2537, IDF-4310, IDF-5150, IDF-5151, and IDF-4979
See merge request espressif/esp-idf!17960
2022-07-19 21:28:31 +08:00
Cao Sen Miao
53580a62b5
I2C: Fullfill the I2C clock tree, and support 26M XTAL on ESP32-C2
2022-07-19 11:41:42 +08:00
Armando
5b523a3313
esp_adc: new esp_adc component and adc drivers
2022-07-15 18:31:00 +08:00
songruojing
0c4b9a0101
gpio: Fix HAL bad bit shift operation on gpio_num_t reported from coverity
...
All gpio hal and ll functions input arguments gpio_num_t are changed to uint32_t type.
Validation of gpio num should be guaranteed from the driver layer.
2022-07-15 16:51:25 +08:00
Jiang Jiang Jian
b610b47a83
Merge branch 'feature/esp32s3_memprot_additional_improvements' into 'master'
...
[System/Security] Memprot after-merge improvements (v5.0)
Closes IDF-5263 and IDF-5208
See merge request espressif/esp-idf!18893
2022-07-13 15:48:20 +08:00
Cao Sen Miao
683d92bc88
flash_encryption: Fix issue that flash encryption cannot work when 8-line psram enabled,
...
Closes https://github.com/espressif/esp-idf/issues/9244 ,
Closes https://github.com/espressif/esp-idf/issues/9287
2022-07-12 16:08:57 +08:00
Song Ruo Jing
ea97cc93ea
Merge branch 'feature/c2_systimer_26mhz' into 'master'
...
esp32c2: 26 MHz XTAL support: Kconfig option, systimer support
Closes IDF-5412 and IDF-5413
See merge request espressif/esp-idf!18835
2022-07-11 16:17:25 +08:00
Marius Vikhammer
6cc871d793
Merge branch 'feature/ulp_riscv_adc' into 'master'
...
ulp-riscv: add support for using ADC as well as an example show-casing it.
Closes IDFGH-7564 and IDF-1714
See merge request espressif/esp-idf!18767
2022-07-11 12:30:31 +08:00
songruojing
996fb0cce8
G0: hal/regi2c_ctrl.h now defines all REGI2C macros to pass g0_components build test
2022-07-11 12:24:58 +08:00
wuzhenghui
a9c8065030
Kconfig: Update dependencies to avoid invalid configurations
...
1. Since the baud rate in the ROM cannot be changed,
set the default baud rate of the 26Mhz version
of esp32c2 to 74800
2. Since the systimer configuration of the 26Mhz
version requires a non-integer systimer frequency
configuration, and this feature is not supported
in the current ROM, this option is disabled for
the 26Mhz version esp32c2
2022-07-11 12:24:58 +08:00
Ivan Grokhotkov
2e37218ce5
soc, hal: remove XTAL_CLK_FREQ
...
XTAL_CLK_FREQ now depends on the actual XTAL used, remove this macro
and get the XTAL frequency from the RTC register instead.
No uses of XTAL_CLK_FREQ found, other than in the UART LL.
2022-07-11 12:24:58 +08:00
Ivan Grokhotkov
5b54ae76d4
esp_timer, hal: add support for non-integer systimer frequency
...
When ESP32-C2 is paired with a 26 MHz XTAL, the systimer tick
frequency becomes equal to 26 / 2.5 = 10.4 MHz. Previously we always
assumed that systimer tick frequency is integer (and 1 MHz * power of
two, above that!).
This commit introduces a new LL macro, SYSTIMER_LL_TICKS_PER_US_DIV.
It should be set in such a way that:
1. SYSTIMER_LL_TICKS_PER_US / SYSTIMER_LL_TICKS_PER_US_DIV equals the
actual systimer tick frequency,
2. and SYSTIMER_LL_TICKS_PER_US is integer.
For ESP32-C2 this means that SYSTIMER_LL_TICKS_PER_US = 52 and
SYSTIMER_LL_TICKS_PER_US_DIV = 5.
This introduced two possible issues:
1. Overflow when multiplying systimer counter by 5
- Should not be an issue, since systimer counter is 52-bit, so
counter * 5 is no more than 55-bit.
2. The code needs to perform:
- divide by 5: when converting from microseconds to ticks
- divide by 52: when converting from ticks to microseconds
The latter potentially introduces a performance issue for the
esp_timer_get_time function.
2022-07-11 12:24:37 +08:00
Marius Vikhammer
e8b5096f52
ulp-riscv: add support for using ADC as well as an example show-casing it.
2022-07-11 09:31:22 +08:00
Martin Vychodil
0c87ae2a91
System/Security: Memprot API unified (ESP32S3)
...
Added missing features and improvements
2022-07-09 22:57:51 +02:00
Jiang Jiang Jian
a7bf3af687
Merge branch 'bugfix/reset_ble_hw_on_inititalization' into 'master'
...
component/bt: reset Bluetooth hardware during controller inititalization on ESP32-C3/ESP32-S3
Closes BT-2402
See merge request espressif/esp-idf!18831
2022-07-08 16:21:41 +08:00
Michael (XIAO Xufeng)
a58362a429
Merge branch 'feature/efuse_rev_major_minor' into 'master'
...
efuse: Adds major and minor versions
See merge request espressif/esp-idf!18255
2022-07-07 11:48:54 +08:00
Song Ruo Jing
b662f4b74f
Merge branch 'feature/support_26M_32M_xtal_bbpll_c2' into 'master'
...
support c2 26M/32M xtal for bbpll
Closes IDF-5485
See merge request espressif/esp-idf!18769
2022-07-06 21:17:52 +08:00
morris
a92cce9861
Merge branch 'bugfix/calib_i2c_clk' into 'master'
...
I2C: Make I2C clock frequency accurate
Closes IDF-5363
See merge request espressif/esp-idf!18686
2022-07-06 20:52:31 +08:00
wangmengyang
1d55f12c2d
component/bt: reset Bluetooth hardware during controller inititalization on ESP32-C3/ESP32-S3
...
1. Rename MACROs SYSTEM_WIFI_RST_EN register bit fields to be more recognizable
2. reset Bluetooth baseband and clock bits to fix the issue of task watchdog triggered during controller initialization due to invalid hardware state
2022-07-06 16:23:48 +08:00
Cao Sen Miao
e218723e0e
I2C: Make I2C clock frequency accurate
2022-07-06 11:58:08 +08:00
GengYuchao
d145c337e0
Enable rpa_moudle reset function
2022-07-05 20:50:31 +08:00
cje
e16165f263
support c2 26M/32M xtal for bbpll
2022-07-05 17:45:03 +08:00
KonstantinKondrashov
0f8ff5aa15
efuse: Adds major and minor versions and others
2022-07-05 14:38:27 +08:00
morris
7863c1bc45
Merge branch 'bugfix/fix_rtc_freq_err_for_h2_beta1' into 'master'
...
Bugfix/fix rtc freq err for h2 beta1
See merge request espressif/esp-idf!18682
2022-07-04 16:46:17 +08:00
Omar Chebib
cd48baf979
Refactor: move regi2c_*.h header files from esp_hw_support to soc component
...
When creating G0 layer, some regi2c_*.h headers were moved out from
esp_hw_support (G1) to soc (G0). In order to be consistent with that change,
move all the remaining regi2c_*.h headers to soc too.
2022-06-30 09:40:44 +00:00
GengYuchao
10fd1daa10
Add ETM clk gate defines for h2
2022-06-30 17:02:00 +08:00
Armando (Dou Yiwen)
e13d7f8351
Merge branch 'bugfix/s2_ap64_psram_crash_issue' into 'master'
...
psram: fix esp32s2 module with APS6404 PSRAM crash issue
Closes IDF-5361
See merge request espressif/esp-idf!18699
2022-06-29 11:19:17 +08:00
Armando
c51c1a8651
mmu: fix wrong mmu entry id issue
2022-06-28 14:17:44 +08:00
Armando
31b3f31ef4
ext_mem: make memory region check strict
2022-06-28 14:17:44 +08:00
morris
7fd9a91034
dma: move from driver to hw_support
2022-06-28 14:17:12 +08:00
Mahavir Jain
dd24639215
Merge branch 'esp32h2/enable_ecc_accelerator' into 'master'
...
esp32h2: Enable ECC accelerator
Closes IDF-3397
See merge request espressif/esp-idf!18647
2022-06-23 20:06:26 +08:00
Cao Sen Miao
2c0651a671
Add regi2c enable/disable reference count
2022-06-23 15:36:44 +08:00
Cao Sen Miao
3a820462ac
temperature_sensor: Add temperature sensor support for ESP32-C2
2022-06-23 15:36:43 +08:00
Sachin Parekh
6cfc9c365f
esp32h2: Enable ECC accelerator
2022-06-23 12:59:13 +05:30
Omar Chebib
8fae0f0753
G0: Support Xtensa targets for G0-only compilation
...
G0-only example now supports Xtensa targets. This means that G0 layer
does not depend on G1+ layers anymore
2022-06-20 11:34:20 +00:00
Martin Vychodil
339fcbf14d
System/Security: Memprot API unified (ESP32S3)
...
Unified Memory protection API for all PMS-aware chips - ESP32S3 port
2022-06-20 02:36:44 +00:00
Omar Chebib
752026a174
Merge branch 'refactor/remove_g0_dep_on_g1_riscv' into 'master'
...
G0: RISC-V targets have now an independent G0 layer
See merge request espressif/esp-idf!17926
2022-06-16 11:53:39 +08:00
Armando (Dou Yiwen)
0b80546f8e
Merge branch 'feature/new_esp_psram_component' into 'master'
...
esp_psram: new esp psram component
Closes IDF-4318, IDF-4382, IDF-4841, and IDFGH-7192
See merge request espressif/esp-idf!18050
2022-06-15 19:16:56 +08:00
laokaiyao
28b8fc6a7e
i2s: update documents for driver-NG
2022-06-15 10:30:04 +08:00
laokaiyao
0fe3bb8ab7
i2s: update examples and unit-tests
2022-06-15 10:29:06 +08:00
laokaiyao
621d0aa942
i2s: Introduced a brand new driver
2022-06-15 10:29:06 +08:00
Darian
e213e66ba3
Merge branch 'refactor/esp_hw_support_cpu' into 'master'
...
esp_hw_support: Add new esp_cpu.h abstraction
Closes IDF-4769
See merge request espressif/esp-idf!17091
2022-06-14 21:11:30 +08:00
morris
919344547b
Merge branch 'bugfix/rmt_register_file_s3' into 'master'
...
rmt: update register file after fixing csv of RMT peripheral (esp32s2/s3)
Closes IDFGH-7537
See merge request espressif/esp-idf!18392
2022-06-14 18:24:28 +08:00
Michael (XIAO Xufeng)
7b8e5888ca
Merge branch 'refactor/add_clk_tree_ll' into 'master'
...
clk_tree: Stage3 - HAL for clock subsystem
Closes IDF-4334
See merge request espressif/esp-idf!18270
2022-06-14 17:16:29 +08:00
Jiang Jiang Jian
3cb6abee3c
Merge branch 'bugfix/hal_assert_spelling' into 'master'
...
HAL: fix kconfig HAL_ASSERTION typo
See merge request espressif/esp-idf!18482
2022-06-14 16:24:25 +08:00