This commit deprecates the `#include "freertos/task_snapshot.h" include path:
- Adds compatibility header with compile time warning
- Removes hints related to `task_snapshot.h`
- Adds entry to migration guide
Task snapshot API were never intended to be called from user code. This commit
makes task snapshot a private API thus moves `#include "freertos/task_snapshot.h"`
to `#include "esp_private/freertos_debug.h"`.
Task snapshot related Kconfig options have also been hidden.
Note: Added 'freertos_common' mapping to ldgen mapping execptions lists due to
inlining of 'freertos_debug.h' functions.
Catch all tlsf assertion failure and display a hint for out of bound writing since
all assertion failure are triggered when the tlsf metadata structure has been corrupted.
bugfix(nvs_flash) : fixed nvs_set functions behaviour when called sequentially with same key and different data type(s)
Closes IDFGH-9727
See merge request espressif/esp-idf!25581
Currently the component_requirements hint module does not work
as expected if the component list for a project is trimmed down.
With the new "all_component_info" dictionary info in project_description.json,
the module can produce hints even if cmake's COMPONENTS variable is
set.
Signed-off-by: Frantisek Hrbata <frantisek.hrbata@espressif.com>
Add new "all_component_info" dictionary into the
project_description.json file. It contains information about all
registered components presented in the __COMPONENT_TARGETS list.
Since components in this list are not fully evaluated, because only the first
stage of cmakefiles processing is done, it does not contain the same information
as the "build_component_info" dictionary. The "type", "file" and "sources" variables
are missing.
Most of the properties are already attached to the component target, so
this only adds INCLUDE_DIRS property to the target during the first cmakefiles
processing stage.
The "all_component_info" dict is generated in a separate function, even
though the original function for "build_component_info" could be
adjusted. This introduces a little bit of boilerplate, but keeps it
logically separated and probably easier if we want to extend it in the
future.
Signed-off-by: Frantisek Hrbata <frantisek.hrbata@espressif.com>
1. move startup_stack attr from soc_memory_type_desc_t to soc_memory_region_t and
remove unused aliased_iram field
2. all of the last level of RAM is retention dma accessible on esp32c3
3. remove esp32c2 and later chips retention dma accessible memory caps
4. allow allocate memory from RTC_RAM with MALLOC_CAP_EXEC cap
If there is a component(child) within a component(parent), like for test_apps, the parent
component may be wrongly identified as source component for the failed include. This may
lead to a false bug report if the parent component has component, which provides the missing
header, in requirements.
Fix this by looking for the longest matching source component directory.
Suggested-by: Ivan Grokhotkov <ivan@espressif.com>
Signed-off-by: Frantisek Hrbata <frantisek.hrbata@espressif.com>
If LCP keepalive mechanism is enabled in menuconfig, it's statically
configured on creation of an interface and cannot be changed runtime. In
some cases it's useful to relax LCP criteria during runtime operation,
for example before initiating OTA. This config option allows for
disabling already enabled LCP echo (this setting becomes effective after
reconnecting, i.e. initializing a new session)
Closes https://github.com/espressif/esp-protocols/issues/287
Add a test app to verify the working of the application when
SECURE_SIGNED_ON_UPDATE_NO_SECURE_BOOT is selected in the menuconfig
and the application is not signed
This commit adds beta support for the FreeRTOS v10.5.1 kernel which can be
enabled by enabling the CONFIG_FREERTOS_USE_KERNEL_10_5_1 option.
The following changes have been made:
- Updated freertos/CMakeLists.txt to build v10.5.1 kernel with v10.4.3. ports
- Updated existing Xtensa and RISC-V ports to work with V10.5.1
- Modifications to other ESP-IDF components to work with v10.5.1
- Added some ESP-IDF specific tracing changes to v10.5.1 kernel
- Make CONFIG_FREERTOS_USE_KERNEL_10_5_1 a public option
Note: The beta release is missing some minor fixes, performance improvements,
and features. Using this beta release for production is not recommended.
Closes https://github.com/espressif/esp-idf/issues/7137
Merges https://github.com/espressif/esp-idf/pull/12093
fix(ll): remove FLAG_ATTR macro
Such kind of operator overload will not work because C++ thinks such overload is ambiguous and it still prefer the built-in one which accepts and returns integer. Manually force type conversion seems to be unavoidable.
Add changes to use fast_pbkdf2 as default for PMK calculations.
fast_pbkdf2 is significantly faster than current implementations
for esp chips.
Also removes unnecessary code for pbkdf-sha256 and pbkdf-sha512.
This commit moves/merges the IDF FreeRTOS "PinnedToCore" task creation
functions from tasks.c/task.h to idf_additions.h/freertos_task_c_additions.h.
Also updated FreeRTOS Mock component to provide mocks for "idf_additions.h"
headers for our mock tests.
It corrupts environment on macOS runner because it uses shell, not docker-executor,
and makes all tree read-only for a non-root user.
+ Replace examples with real files in example README.md
Currently idf.py reports just "Please use idf.py only in an ESP-IDF shell environment".
Sometimes it may be useful to know for which module the import failed.
Also the problem does not have to be related to shell environment only, but the
python venv can be corrupted. This adds a little bit more verbose error
message.
Signed-off-by: Frantisek Hrbata <frantisek.hrbata@espressif.com>
Users of the nvs API are likely to have `nvs_handle_t` in all cases, but
not all of them carry around the partition name and namespace name (as
they aren't needed after creating an `nvs_handle_t`).
Allow this common case to use nvs iteration without them tracking
additional data by using the `nvs_handle_t` to locate the namespace
index and the partition name by introducing an alterate to
`nvs_entry_find` called `nvs_entry_find_in_handle`, which operates
similarly except that it is given a `nvs_handle_t` instead of partition
and namespace strings.
This is somewhat more limited than the `nvs_entry_find` API as one
cannot examine all keys in a given partition.
Previously, TLSP deletion callbacks were...
- Stored in a seprate TCB member "pvThreadLocalStoragePointersDelCallback"
- Called separately via multipole prvDeleteTLS() insertions in tasks.c
This commit refactors how TLSP deletion callbacks are stored and called:
- TLSP deletion callbacks are now stored in "pvThreadLocalStoragePointers"
directly. configNUM_THREAD_LOCAL_STORAGE_POINTERS is doubled in size so that
the deletion callbacks are stored in the latter half of the array
- The callbacks are now called via "portCLEAN_UP_TCB()". As such, the
prvDeleteTLS() additions are no longer needed and the function can be removed
- Removed some legacy TLSP tests using the old method of storing the callback
pointers.
This commit reduces the source code diff between IDF FreeRTOS and upstream
vanilla FreeRTOS, in preparation for v10.5.1 upgrade.
Previously, if CONFIG_FREERTOS_ENABLE_STATIC_TASK_CLEAN_UP was enabled, users
would provide a definition for a vPortCleanUpTCB() hook function that is called
right before a task's memory is freed in prvDeleteTCB(). However,
vPortCleanUpTCB() will be reclaimed by ESP-IDF for internal use in v6.0.
This commit introduces the following changes...
Introduced a new CONFIG_FREERTOS_TASK_PRE_DELETION_HOOK option:
- Provides the same pre-deletion hook functionality. But users now define
vTaskPreDeletionHook() instead.
- CONFIG_FREERTOS_ENABLE_STATIC_TASK_CLEAN_UP still exists, but is marked as
deprecated. This is to maintain compatibility with existing applications
that already define vPortCleanUpTCB().
- Removed redundant --wl --wrap workaround with vPortCleanUpTCB()
- Added todo notes to remove support for user defined vPortCleanUpTCB()
completely in v6.0.
- Updated test cases to use new CONFIG_FREERTOS_TASK_PRE_DELETION_HOOK option
Freed up portCLEAN_UP_TCB() to call a new internal vPortTCBPreDeleteHook():
- vPortTCBPreDeleteHook() now replaces the previous "wrapped" implementation
of vPortCleanUpTCB().
- vPortTCBPreDeleteHook() is an internal task pre-delete hook for IDF FreeRTOS
ports to inject some pre-deletion operations.
- Internal pre-delete hook now invokes user provided vTaskPreDeletionHook()
if enabled.
- Relocated vPortTCBPreDeleteHook() to correct section in port.c
- a recent commit fixed the API deprecations,
and the BLEDevice object now needs to be accessed through a tuple.
- thus the changes were made in the code wherein the object was used,
but updating the usage in the condition when de
vname is not None got skipped.
GDB on Windows incorrectly reads EOL in the script files causing 'gdb'
action to fail.
(gdb) source .../build/gdbinit/py_extensions
(gdb) source .../build\gdbinit\symbols
add symbol table from file "...\build\bootloader\bootloader.elf"
.../build\gdbinit\symbols:6: Error in sourced command file:
Undefined command: "". Try "help".
Forcing line separator to '\n' resolved the issue
Signed-off-by: Michal Jenikovsky <jendo@jmsystems.sk>
1. The original test, before hint modules support was added, used
tempfile.NamedTemporaryFile in a way which is not supported on windows.
It was having the file open, which the hints tried to read it, leading
the EPERM exception. The docs[1] says this is not supported.
<quote>
Whether the name can be used to open the file a second time, while the
named temporary file is still open, varies across platforms (it can be
so used on Unix; it cannot on Windows)
</quote>
2. The hint module component_requirements test used the idf.py directly,
which is idf.py.exe on windows.Now it's starting idf.py through python.
We could probably used shell=True, but this approach is used in other
tests too.
Anyway the test are now passing on windows.
[1] https://docs.python.org/3/library/tempfile.html
Signed-off-by: Frantisek Hrbata <frantisek.hrbata@espressif.com>
Following tests were added.
1. Test for missing header directory in component's INCLUDE_DIRS
2. Test for missing dependency in component's PRIV_REQUIRES
3. Test for missing dependency in component's REQUIRES
4. Test for dependency in PRIV_REQUIRES which should be in REQUIRES
Signed-off-by: Frantisek Hrbata <frantisek.hrbata@espressif.com>
Implementation of hint module for component dependency. It can provide
hint about missing header directory in component's INCLUDE_DIRS or
about missing component dependency in REQUIRES or PRIV_REQUIRES.
Signed-off-by: Frantisek Hrbata <frantisek.hrbata@espressif.com>
Currently hints are supported based on hints.yml only, which may be
limiting for some use cases. This introduces a generic plugin approach,
which allows to implement hint module that doesn't require entry in hints.yml.
Such module has the full command output available and it is not limited to
a single regex in hints.yml.
Note that regex in hint.yml expects the output concatenated into a single line,
but hint modules are getting the output unchanged.
Signed-off-by: Frantisek Hrbata <frantisek.hrbata@espressif.com>
Introduces get_build_context() helper, which allows to get build context, e.g.
project description, at places where this info is not available. The
build context is set within ensure_build_directory.
Signed-off-by: Frantisek Hrbata <frantisek.hrbata@espressif.com>
feat(idf.py): Allow adding arguments from file via @filename.txt (#11783) (GitHub PR)
Closes IDFGH-10584 and IDFGH-10539
See merge request espressif/esp-idf!24955
The ticket below reports some very strange behaviour, where
even a simple command like the following
python3 -c "import subprocess; subprocess.run([''])"
actually spawns some process and pass instead of raising
PermissionError. Even though the problem is most probably somewhere
else, not in idf_tools, we may just return early if there is no
command available for get_version().
Closes https://github.com/espressif/esp-idf/issues/11880
Signed-off-by: Frantisek Hrbata <frantisek.hrbata@espressif.com>
When interrupt allocation fails, esp_intr_alloc will now print a
message telling that no free interrupt was found. This message is
then checked in hints.yml, to give a link to the troubleshooting
guide.
Currently ESP_PYTHON is used in the install.sh script, but it's
overwritten in detect_python.sh. This allows to explicitly specify
python binary, which should be used to create venv.
$ ESP_PYTHON=/usr/bin/python3.7 ./install.{sh,fish}
$ ESP_PYTHON=/usr/bin/python3.7 ./export.{sh,fish}
Signed-off-by: Frantisek Hrbata <frantisek.hrbata@espressif.com>
