Previously, if CONFIG_FREERTOS_ENABLE_STATIC_TASK_CLEAN_UP was enabled, users
would provide a definition for a vPortCleanUpTCB() hook function that is called
right before a task's memory is freed in prvDeleteTCB(). However,
vPortCleanUpTCB() will be reclaimed by ESP-IDF for internal use in v6.0.
This commit introduces the following changes...
Introduced a new CONFIG_FREERTOS_TASK_PRE_DELETION_HOOK option:
- Provides the same pre-deletion hook functionality. But users now define
vTaskPreDeletionHook() instead.
- CONFIG_FREERTOS_ENABLE_STATIC_TASK_CLEAN_UP still exists, but is marked as
deprecated. This is to maintain compatibility with existing applications
that already define vPortCleanUpTCB().
- Removed redundant --wl --wrap workaround with vPortCleanUpTCB()
- Added todo notes to remove support for user defined vPortCleanUpTCB()
completely in v6.0.
- Updated test cases to use new CONFIG_FREERTOS_TASK_PRE_DELETION_HOOK option
Freed up portCLEAN_UP_TCB() to call a new internal vPortTCBPreDeleteHook():
- vPortTCBPreDeleteHook() now replaces the previous "wrapped" implementation
of vPortCleanUpTCB().
- vPortTCBPreDeleteHook() is an internal task pre-delete hook for IDF FreeRTOS
ports to inject some pre-deletion operations.
- Internal pre-delete hook now invokes user provided vTaskPreDeletionHook()
if enabled.
- Relocated vPortTCBPreDeleteHook() to correct section in port.c
This commit optimizes xTaskRemoveFromEventList() by removing the
listLIST_IS_EMPTY() check from single core builds. The scenario of the event
list being empty when the function is called can only occur on multi-core
builds.
This commit fixes and optimizes vTaskRemoveFromUnorderedEventList() in the
following ways:
- Fixed bug in single core builds where the unblocked task would be placed on
xPendingReadyList.
- If an ISR occurs while accessing xPendingReadyList, and the ISR also
accesses the xPendingReadyList, xPendingReadyList would be corrupted.
- In single core builds, this function is only called from event groups with
the scheduler suspended. Thus the function should have exclusive access to
pxReadyTasksLists instead of xPendingReadyList.
- The function's single core logic has now been updated to match upstream
behavior, by always placing the unblocked task on pxReadyTasksLists.
- Optimized the function for single core builds by removing the
taskCAN_BE_SCHEDULED() check.
- In single core builds, given that the function is always called with the
scheduler suspended
- Thus, the taskCAN_BE_SCHEDULED (and the subsequent routine to place the
unblocked task on the xPendingReadyList) is not necessary for single core
builds.
- The function now matches upstream behavior in single core builds.
Closes https://github.com/espressif/esp-idf/issues/11883
portBASE_TYPE is an internal macro defined by the porting layer. This commit
changes all references to BaseType_t which is the official type exposed by
FreeRTOS.
portSTACK_TYPE is an internal macro defined by the porting layer. This commit
changes all references to StackType_t which is the official type exposed by
FreeRTOS.
- add hardware stack guard based on assist-debug module
- enable hardware stack guard by default
- disable hardware stack guard for freertos ci.release test
- refactor rtos_int_enter/rtos_int_exit to change SP register inside them
- fix panic_reason.h header for RISC-V
- update docs to include information about the new feature
This commit adds a "CONFIG_FREERTOS_USE_KERNEL_10_5_1" hidden option to enable
building of the v10.5.1 kernel for development/testing purposes. Currently
enabling this option will just cause CMake to error out.
Also added a markdown file to record the code changes made to the V10.5.1 source
when porting over SMP behavior.
This commit adds the source files for the FreeRTOS Kernel V10.5.1 in
preparation for upgrading ESP-IDF FreeRTOS Kernel version (files copied from
https://github.com/FreeRTOS/FreeRTOS-Kernel/tree/V10.5.1)
The following modifications were made to the files when copying
- Added "SPDX-FileCopyrightText" and "SPDX-FileContributor" tags to all files
to pass ESP-IDF pre-commit checks.
- Left out some files unnecessary to ESP-IDF (e.g., URLs, "History.txt", and
"portable" folder).
freertos: Updated vTaskRemoveFromUnorderedEventList() to consider scheduler state before adding task to ready list
Closes IDF-5785
See merge request espressif/esp-idf!23482
vTaskRemoveFromUnorderedEventList() runs under the assumption that the
scheduler is suspended during the call. However, for IDF FreeRTOS, this
is not true. When dual-core system is active, this API call is made in
a critical section but without suspending the scheduler. This commit
updates the vTaskRemoveFromUnorderedEventList() function to now consider
the scheduler state on either cores before adding a task to the ready list.
This commit fixes a bug in xTaskRemoveFromEvenetList() where in the
check for scheduler suspension did not account for nested suspensions.
Additionally, this commit updates all checks for scheduler
suspension to follow a uniform way.
This commit refactors the "freertos" component's structure as follows:
- "FreeRTOSConfig.h" related files moved to "./config" directory
- Refactored CMakeLists.txt file in preparation for v10.5.1 upgrade
- Grouped list appends based on component organization
- Removed some unecessarily public "include_dirs"
- Removed FreeRTOS-openocd.c
- uxTopUsedPriority has been added back to tasks.c since v10.4.2
- Thus the workaround in FreeRTOS-openocd.c is no longer needed and can
be removed.
linux/lwip: Wrap some IO posix functions
* to workaourd the FreeRTOS EINTR issue (when building without lwip)
* to correctly choose the sub-system based on fd (when building with
lwip) -- passing control to either linux/system or to lwip
This commit also addapts tapio-if to provide DHCP client by default and
configurable settings for static IP
This commit refactors port_systick.c so that all ports (RISC-V vs Xtensa) of
all FreeRTOS implementations (IDF vs Amazon SMP FreeRTOS) use the same set of
tick interrupt functions. Thus, these funcitons are now common:
- vPortSetupTimer() to setup the tick interrupt's timer
- xPortSysTickHandler() that is called on each tick interrupt
* Added a POSIX/Linux simulator that is compatible with the Amazon
FreeRTOS SMP API. Note that the simulator itself is still
single core, like the IDF FreeRTOS POSIX/Linux simulator.
This commit adds the corresponding CreateWithCaps functions for tasks:
- xTaskCreatePinnedToCoreWithCaps()
- xTaskCreateWithCaps()
- vTaskDeleteWithCaps()
Documentation and migraiton guide have been updated accordingly.
Closes https://github.com/espressif/esp-idf/issues/11216
This commit adds "bare metal stubs" xtensa_rtos.h glue layer to mimic a bare
metal OS port. The bare metal stubs don't access any components outside of the
G0 group.
The previous commit moved the OS agnostic files from the IDF FreeRTOS port to
the xtensa component, thus can be accessed by both IDF and Amazon SMP FreeRTOS.
This commit removes the redudant copies in the Amazon SMP FreeRTOS port.
When porting an RTOS to the Xtensa architecture, there are a few files that
are common to all Xtensa RTOS ports. These files form the Xtensa RTOS porting
layer (e.g., "xtensa_vectors.S", "xtensa_context.S"). An Xtensa RTOS port is
expected to provide an RTOS specific "xtensa_rtos.h" header to interface with
the Xtensa RTOS porting layer.
Previously, the Xtensa RTOS porting layer files were placed in the FreeRTOS
component. This commit does the following:
1. Moves the Xtensa RTOS porting layer files from the `freertos` component to
the `xtensa` component. The following files were moved:
- xtensa_asm_utils.h
- xtensa_context.S
- xtensa_loadstore_handler.S
- xtensa_vectors.S
2. Refactored xtensa component include paths to separate Xtensa RTOS porting
layer headers.
- Xtensa HAL headers included via `#include <xtensa/...h>`
- Xtensa RTOS porting layer headers included via `#include <...h>`
Note: The xtensa files in the Amazon SMP FreeRTOS port are not moved/deleted in
this commit to ensure the moved files retain a clean diff history.
When building for CONFIG_FREERTOS_SMP, "idf_additions.h" was previously
implicitly included by "task.h" so that other ESP-IDF components still have
access to IDF API additions without needing to include "idf_additions.h"
directly.
However, some FreeRTOS headers (e.g., queue.h) will include task.h before
declaring any types (e.g., QueueHandle_t). Thus if any of those types are used
in idf_additions.h, we get a missing type error.
This commit moves the implicity include of idf_additions.h to FreeRTOS.h
Previously, some IDF FreeRTOS API additions that were meant to be private were
exposed through the same "idf_additions.h" header. This commit moves those
functions to a separate header included via
"esp_private/freertos_idf_additions_priv.h" so that they are not mistaken as
public API by users.
This commit also fixes some missing include and C++ guards in idf_additions.h
freertos_tasks_c_additions.h is technically included as source file. This
commit removes the "private_include" directory of "freertos_tasks_c_additions.h"
and treats it as a source file of "esp_additions".
This commit fixes the failing test - Test vTaskSuspendAll allows
scheduling on other cores.
The commit also adds a new test to test the scenario where in an
unpinned task, when unblocked by an ISR can be scheduled on the core
which has the scheduler running.
This commit merges the "FreeRTOSConfig_smp.h" file into the "FreeRTOSConfig.h".
The configurations for all FreeRTOS implementations are now stored in a single
file.
xTaskRemoveFromUnorderedEventList is a scheduler internal function, thus will
never be called by users. Therefore, the compatbility define is not necessary.
FromISR APIs would put an unblocked task on the pending ready list if
the scheduler is suspended on the current core, irrespective of the
task's core affinity and the state of the scheduler on the other core.
This commit updates this behavior by allowing tasks to get scheduled on
a core which has the scheduler running as long as the task's core
affinity allows it.
The task snapshot tests use esp_cpu_stall() to stall the other CPU before
manually walking the task lists. However, it is possible that the other CPU
was also accessing the task lists when esp_cpu_stall() is called, leading to
flakey tests
This commit fixes the test by using a 2-way handshake instead of
esp_cpu_stall().
The default implementation of some xtensa vectors were previously moved to
"xtensa_vector_defaults.S" as weak functions so that they could be overriden.
This commit moves these default vectors back into "xtensa_vectors.S" in
preparation for further refactoring of the xtensa component.
This commit adds a common macro for the differing configASSERT() calls that
check if the scheduler is suspended outside a critical section. This macro
allows vanilla behavior to be restored for single core builds. Also added
comments explaining why xTaskGetSchedulerState() is called instead when
building for SMP.
Vanilla FreeRTOS expects applications to use one of the heap implementations
provided by FreeRTOS (i.e., heap_x.c), where functions such as pvPortMalloc()
and vPortFree() are defined in the heap implementation.
However, ESP-IDF already provides its own heap implementation
(i.e., esp_heap_caps.h). Thus, the pvPortMallc()/vPortFree() functions were
previously overriden by macro to call esp_heap functions directly.
This commit refactors the FreeRTOS port's heap as such:
- Added a heap_idf.c that implements all of the heap related functions required
by FreeRTOS source
- All dynamic memory allocated by FreeRTOS is from internal memory. Thus, the
FreeRTOS heap is the internal memory subset of the ESP-IDF heap.
- Removed some old macros to reduce diff from upstream source code.
The stream buffer send-receive test preivously contained the following bugs:
- "sender" task would send 101 bytes instead of 100
- The main task would return before "sender" task sends its 101st item. Thus
the sender task would cause memory corruption when accessing "tc" structure
allocated on the main task's stack
This commit fixes and simplifies the stream buffer test.
This commit updates the linker fragment file for IDF FreeRTOS.
- Linker fragment file's formatting was updated
- Placement rules of functions is now clearly specified inside the linker
fragment file.
- Some extra functions are now placed in flash in accordance to the new
placement rules.
This commit updates the linker fragment file for Amazon SMP FreeRTOS.
- Linker fragment file's formatting was updated
- Placement rules of functions is now clearly specified inside the linker
fragment file.
- Some extra functions are now placed in flash in accordance to the new
placement rules.
This commit adds a separate linker fragment file "linker_common.lf" for the
functions in "port_common.c". The placement rules are now clearly specified
inside the linker fragment file.
This commit updates the FreeRTOS port FPU unit tests so that they run for
multiple iterations, thus checking that a task's FPU context is properly
cleaned up on deletion.
Previously, IDF FreeRTOS would restrict the clean up of task memory (done by
vTaskDelete() or the Idle task) to only tasks pinned to the current core or
unpinned tasks. This was due to the need to clear the task's coprocessor
ownership on the other core (i.e., "_xt_coproc_owner_sa"). But this restriction
can be lifted by simply protecting access of "_xt_coproc_owner_sa" with a
spinlock.
This commit implements a "_xt_coproc_owner_sa_lock" to protect the access of
"_xt_coproc_owner_sa", thus vTaskDelete() and prvDeleteTCB() can now delete
tasks pinned to the other core so long as that task is not currently running.
Note: This fix was copied from the Xtensa port of Amazon SMP FreeRTOS
This commit removes the dependency on portUSING_MPU_WRAPPERS on the Xtensa port
of IDF FreeRTOS. This dependency was added due to a hack implemented in the
upstream port that required the usage of the "xMPUSettings" member of the TCB.
The "xMPUSettings" would be used as a pointer to the task's coprocessor save
area on the stack, even though FreeRTOS MPU support was not available.
The hack has now been removed, and the CPSA pointer is now calculated using
a combination of constant offsets values and the pxEndOfStack member of the
TCB.
Note: This impelemtation was copied from the Xtensa port of Amazon SMP FreeRTOS.
This commit refactors the FPU handling code on the Xtensa port of Amazon SMP
FreeRTOS in the following ways:
Auto-pinning via XT_RTOS_CP_EXC_HOOK
------------------------------------
The "_xt_coproc_exc" exception would previously automatically pin a task that
uses the FPU to the current core (to ensure that we can lazy save the task's FPU
context). However, this would mean that "xtensa_vectors.S" would need to be
OS-aware (to read the task's TCB structure).
This is now refactored so that "_xt_coproc_exc" calls a CP exception hook
function ("XT_RTOS_CP_EXC_HOOK") implemented in "portasm.S", thus allowing
"xtensa_vectors.S" to remain OS agnostic.
Using macros to acquire owner spinlock
--------------------------------------
The taking and relasing of the "_xt_coproc_owner_sa_lock" is now mostly
abstracted as the "spinlock_take" and "spinlock_release" macro. As a result,
"_xt_coproc_release" and "_xt_coproc_exc" are refactored so that:
- They are closer to their upstream (original) versions
- The spinlock is only taken when building for multicore
- The spinlock held region is shortened (now only protects the instructions
that access the "_xt_coproc_owner_sa" array
Other Changes
-------------
- Updated placing and comments of various "offset_..." constants used by
portasm.S
- Update description of "get_cpsa_from_tcb" assembly macro
- Tidied up some typos in the ".S" files
This commit fixes the following FPU/Coprocessor bugs in the Xtensa port of
Amazon SMP FreeRTOS:
- vPortCleanUpCoprocArea() does not calculate the correct pointer to the
task's CPSA (located on the task's stack). This can result in
- _xt_coproc_release() not releasing the task's CP ownership
- The next coprocessor exception will write the current CP owner (i.e., the
deleted task's CPSA) leading to memory corruption
- _xt_coproc_release() writes xCoreID instead of 0 when clearing a CP owner.
This results in the next CP exception trying to load the CP owner's CPSA at
the address of "xCoreID", leading to a double exception.
This commit updates variousf pytest scripts to expect
"main_task: Calling app_main()" instead of "cpu_start: Starting scheduler" as
indicator of the start of an application.
This commit refactors port_common.c so that it only contains implementation of
FreeRTOS port functions that are common to all FreeRTOS ports (i.e., on all
architectures and on all FreeRTOS implementations).
This commit refactors the OS startup functions as follows:
- Moved the OS/app startup functions listed below to "app_startup.c". Their
implementations are now common to all ports (RISC-V and Xtensa) of all
FreeRTOS implementations (IDF and Amazon SMP).
- esp_startup_start_app()
- esp_startup_start_app_other_cores()
- Removed esp_startup_start_app_common() as app startup functions are now
already common to all ports.
- Added extra logs to "main_task" to help with user debugging
Note: Increased startup delay on "unity_task". The "unity_run_menu()" is non
blocking, thus if the main task or other startup tasks have not been freed
by the time "unity_run_menu()" is run, those tasks will be freed the next time
"unity_task" blocks. This could cause some tests to have a memory leak, thus
the "unity_task" startup delay has increased.
FreeRTOS(IDF): Restore vanilla task selection algorithm if building for single core with optimized selection is disabled
See merge request espressif/esp-idf!21001
Since core affinity is supported in task stats by default in Amazon
FreeRTOS SMP, the Kconfig option
CONFIG_FREERTOS_VTASKLIST_INCLUDE_COREID is now made only available for
IDF-FreeRTOS.
This commit restores the vanilla behavior for taskSELECT_HIGHEST_PRIORITY_TASK
when configNUM_CORES == 1 && configUSE_PORT_OPTIMISED_TASK_SELECTION == 0. This
results in the SMP selection algorithm (taskSelectHighestPriorityTaskSMP) to
only be run when configNUM_CORES > 1.
This commit adds preprocessing time checks to ensure that
- configNUM_CORES is defined to 1 or 2
- Incompatible configurations are not set depending on configNUM_CORES
Macros that need to reteurn a value should use GCC statement expression macro
syntax. This commit fixes the portTRY_ENTER_CRITICAL() in the RISC-V port of
SMP FreeRTOS to be a statement expression macro.
Due to SMP, critical sections have been added to xTaskIncrementTick() and
vTaskSwitchContext() (to take the xKernelLock). However, this is technically
not necessary when building for single-core as FreeRTOS expect these funcitons
to be called with interrupts already disabled.
This commit makes the critical secitons in those functions depend on
"configNUM_CORES > 1", and ensures that interrupts are disabled when calling
those functions. This effectively restores the vanilla behavior for these
functions when building for single-core.
In IDF FreeRTOS, when building for SMP, there are numerous functions
which require different critical sections when compared to single-core. This
commit encapsulates those difference into a common set of macros whose
behavior depends on "configNUM_CORES > 1". As such...
- Vanilla behavior has been restored for some functions when building for
single core (i.e., used to call taskENTER_CRITICAL, now disables interrupts
mactching vanilla behavior).
- Reduces number of "#ifdef (configNUM_CORES > 1)" in functions
- Any SMP only critical sections are now wrapped by
"#ifdef (configNUM_CORES > 1)" and properly documented via comments.
The portDISABLE_INTERRUPTS() macro on Xtensa should return only the interrupt
mask/level before the interrupts were disabled. Previously, the entire contents
of PS register were returned (i.e., direct return from RSIL instruction without
any bit masking or shifting).
This commit fixes the portDISABLE_INTERRUPTS() macro to return the INTLEVEL
bitfield of the PS register.
This commit updates how configTHREAD_LOCAL_STORAGE_DELETE_CALLBACKS is defined
by default it to 0 if not defined elsewhere. Dependent code now check for
"configTHREAD_LOCAL_STORAGE_DELETE_CALLBACKS == 1" instead.
This commit synchronize the cosmetic differences of IDF FreeRTOS to upstream
Vanilla v10.4.3. Comsetic differences include:
- Out of date doxygen API descriptions
- Misnamed parameters
- Missing examples
- Fixed/added missing @cond/@code directives
- Extra/missing comments/lines
- Code formatting (uncrustify)
Other changes:
- Some ESP_PLATFORM directives were also removed
- xTaskIncrementTickOtherCores() now depends on "configNUM_CORES > 1"
- Updated some multi-core dummy variable names in FreeRTOS.h
This commit removes the updates the usage of queue locks in IDF FreeRTOS
Queue locks are present in Vanilla FreeRTOS to ensure that queue functions
behave deterministicly in critical sections (i.e., no walking linked lists
while interrupts are disabled). However, currently in IDF FreeRTOS...
- When configNUM_CORES > 1, IDF FreeRTOS drops the determinism requirement.
Thus, queue functions could be simplified if queue locks were not used at all
(and have a queue function do everything inside the same critical section).
- When configNUM_CORES == 1, the current queue implementation in IDF FreeRTOS
does not meet the determinism requirements, as critical sections are used
(instead of scheduler suspension) when locking/unlocking the queues.
There, this commit updates multiple queue functions so that
- When configNUM_CORES > 1
- Queue locks are no longer used. All actions are done within the same
critical section.
- Affected queue functions now need 40% less CPU clock cycles when blocking
- When configNUM_CORES = 1
- Queue locks are still used.
- Vanilla behavior of suspending the scheduler is restored when locking
the queue. Thus queue fucntions are now deterministic and have the same
behavior as Vanilla FreeRTOS.
- Affected queue functions now takes 36% more CPU clock cycles when
blocking (due to the scheduler suspension/resumption).
The following changes have been made in this commit:
1. configMINIMAL_STACK_SIZE is now defined as CONFIG_FREERTOS_IDLE_TASK_STACKSIZE.
2. Removed configIDLE_TASK_STACK_SIZE config as it was redundant.
3. Updates the order of allocating the TCB and stack memory to avoid the
stack memory overriding the TCB memory when the stack grows downwards.
4. CONFIG_FREERTOS_IDLE_TASK_STACKSIZE is now incorporated into the
FreeRTOSConfig_smp.h to configure the IDLE0 stack size.
This commit fixes flakey task delay tests when running on IDF FreeRTOS. IN IDF
FreeRTOS, core 1's tick interrupts could be up to (< 1 tick) out of phase from
core 0's tick interrupt, thus the measured delay time on core 1 could last 1
tick longer. This commit makes the test detla 2 ticks for IDF FreeRTOS.
This commit adds a copy of upstream vanilla FreeRTOS uncrustify.cfg files from
the following upstream commit:
89e4823a49
Note: "pp_indent_brace" is commented out as that was enabled after v10.4.3
Also also added a note in the ESP-IDF style guide aobut formatting FreeRTOS
source code using Uncrustify.
