Li Shuai
512800891e
light sleep: add uart new final state machine support for esp32s3
2021-07-20 11:27:14 +08:00
morris
3176ba11d8
gdma: update DMA soc data for esp32-s3
2021-07-16 14:47:09 +08:00
morris
217d3eb690
Merge branch 'feature/adc_single_sample_support_on_s3' into 'master'
...
adc: support adc single read on s3
Closes IDF-3118
See merge request espressif/esp-idf!14036
2021-07-16 06:32:08 +00:00
laokaiyao
27d9657b6c
driver/adc: support adc single sample on s3
2021-07-15 19:13:50 +08:00
Michael (XIAO Xufeng)
ded74889da
Merge branch 'bugfix/spi_slave_wrong_miso_mosi' into 'master'
...
spi_slave: Fix MOSI/MISO inconsistent references on the SPI Slave drivers.
See merge request espressif/esp-idf!13645
2021-07-15 08:51:41 +00:00
Armando
6bb6f3ebc4
adc: refactor esp32s3 adc_ll.h
2021-07-15 10:33:03 +08:00
Marius Vikhammer
71c1da8952
timer group: add timer group and WDT support for ESP32S3
...
Regenerate timer group header files and update LL, check examples
and update docs.
2021-07-06 16:21:43 +08:00
morris
d9d4db43a1
Merge branch 'feature/dedic_gpio_esp32s3' into 'master'
...
Dedicated gpio driver on esp32s3
Closes IDF-3387
See merge request espressif/esp-idf!14196
2021-07-06 03:20:04 +00:00
Michael (XIAO Xufeng)
5986b204c6
Merge branch 'feature/i2c_add_static_buffer_transfers' into 'master'
...
i2c: add `i2c_cmd_link_create_static()` to create commands from a given buffer
Closes IDFGH-3087
See merge request espressif/esp-idf!13013
2021-07-02 14:00:03 +00:00
Michael (XIAO Xufeng)
e8ff60544d
Merge branch 'bugfix/channel_clk_independent' into 'master'
...
rmt: clean up and support esp32-s3 (no DMA support)
Closes IDF-3296 and IDFGH-5350
See merge request espressif/esp-idf!13244
2021-07-01 04:37:07 +00:00
morris
c8c3015018
dedic_gpio: support on esp32s3
2021-06-30 18:10:54 +08:00
Gustavo Henrique Nihei
4bc9e18124
spi: Ensure DMA In-Link EOF is generated by trans_done on SPI Slave
2021-06-28 18:58:59 -03:00
Gustavo Henrique Nihei
fb8d9f76b3
spi: Remove Slave TX/RX set bitlen not effective for ESP32-S2/C3/S3
...
Furthermore, RX_EOF_EN should only be set when SPI Slave is configured
for segment transfer mode and the "ms_data_bitlen" field is configured
to control the "IN_SUC_EOF" interrupt. Since "ms_data_bitlen" is not
set anymore for S2, C3 and S3, "RX_EOF_EN" should be cleared.
2021-06-28 18:58:59 -03:00
bizhuangyang
78c67d2384
gpio:support gpio in/out/interrupt for esp32s3(728)
...
Add support of gpio for esp32s3(728). Adjust some pins and comments in test_gpio.c. Add support for gpio functions for gpio19 and gpio20. Update S3 programming guide Peripheral API: gpio and sigmadelta. Add unit test for input and output function of S3 USB pins(GPIO19 and GPIO20) and C3 USB pins(GPIO18 and GPIO19). Adjust input only test in test_spi_master.c.
2021-06-28 11:44:14 +08:00
morris
40f350693f
rmt: update soc data with regtool for esp32s3
2021-06-22 15:29:11 +08:00
morris
a1494809b2
rmt: clean up LL driver
2021-06-22 15:29:11 +08:00
morris
9afdf54748
hal: added HAL_ASSERT
2021-06-22 11:28:01 +08:00
Cao Sen Miao
f2fe0847d5
usb_serial_jtag: add initial support for S3 (including flashing, monitoring, writing, and reading) but console is not avaliable now
2021-06-18 12:42:41 +08:00
Cao Sen Miao
11672dc9e5
soc: update the csv headers for esp32s3
2021-06-16 18:04:18 +08:00
Michael (XIAO Xufeng)
1322a44588
Merge branch 'feature/mcpwm_refactor_and_support_esp32s3' into 'master'
...
MCPWM: refactor driver and support ESP32-S3
Closes IDF-1765
See merge request espressif/esp-idf!11907
2021-06-09 16:45:20 +00:00
Omar Chebib
cfcbca1271
i2c: optimize space allocated for read or write buffers
...
Only a single command will be allocated now when a read or write is
prepared in the command list. The size of a command's buffer is not
limited to 255 bytes anymore.
2021-06-09 15:21:20 +08:00
Angus Gratton
bc4eb2071c
Merge branch 'feature/toolchain_2021r1' into 'master'
...
Bring 2021r1 toolchains
Closes IDFGH-5009
See merge request espressif/esp-idf!13554
2021-06-09 05:06:23 +00:00
morris
d4fe219c49
mcpwm: refactor driver
2021-06-09 12:27:01 +08:00
Michael (XIAO Xufeng)
afe9b42cbf
Merge branch 'typo_fix/fix_typo_in_comment_in_uart_ll' into 'master'
...
Fix typo in `include/hal/uart_ll.h`
Closes IDFGH-5320
See merge request espressif/esp-idf!13826
2021-06-09 02:13:36 +00:00
Michael (XIAO Xufeng)
e005ec0899
Merge branch 'feature/s3_base_support' into 'master'
...
soc: S3 base support
See merge request espressif/esp-idf!13827
2021-06-07 12:07:08 +00:00
Anton Maklakov
5a982ffe7a
hal: fix ee.get_gpio_in command for esp32-s3
2021-06-07 12:52:50 +07:00
Marius Vikhammer
19a492bc8d
soc: add base support for ESP32-S3
...
Updates the following with changes from verification branches:
* esp_rom linker files
* rtc_cntl and system reg and struct headers
Also updates:
* GDMA driver with new register layout
* esptool submodule commit
2021-06-07 10:40:14 +08:00
Michael (XIAO Xufeng)
1596e336a1
Merge branch 'bugfix/spi_flash_cs_setup' into 'master'
...
spi_flash: fix cs line setup to make the flash driver more stable
Closes IDF-3240
See merge request espressif/esp-idf!13623
2021-06-04 07:05:05 +00:00
Andrey Starodubtsev
8488055711
Fix typo in include/hal/uart_ll.h
...
s/final state machine/finite-state machine/g
Signed-off-by: bizhuangyang <bizhuangyang@espressif.com>
Merges https://github.com/espressif/esp-idf/pull/7076
2021-06-02 15:37:30 +08:00
Cao Sen Miao
08f1bbe0c7
spi_flash: fix cs line setup to make the flash driver more stable
2021-06-01 16:41:41 +08:00
Gustavo Henrique Nihei
c1b3d77dcf
spi: Fix wrong target register for interrupt disable
2021-05-31 11:25:32 -03:00
Michael (XIAO Xufeng)
8409485b22
Merge branch 'doc/fix_misleading_of_mcpwm_capture_enable_doc' into 'master'
...
driver/mcpwm: fix the misleading of mcpwm_capture_enable parameters
Closes IDFGH-3000
See merge request espressif/esp-idf!13497
2021-05-16 15:15:26 +00:00
laokaiyao
e66f25caf2
driver/mcpwm: fix the misleading of mcpwm_capture_enable parameters
...
closes https://github.com/espressif/esp-idf/issues/5032
2021-05-13 12:23:19 +08:00
morris
e10202a608
lcd: add esp_lcd component
...
* Support intel 8080 LCD panel IO on ESP32-S3
* Support RGB LCD panel on ESP32-S3
* Support SPI && I2C LCD panel IO on all esp chips
2021-05-12 17:53:32 +08:00
Kang Zuoling
8887133d0c
touch_sensor: fix esp32s2 touch sensor default power source
2021-05-08 11:09:17 +08:00
Michael (XIAO Xufeng)
758238a8a1
Merge branch 'bugfix/separate_gdma_tx_rx_interrupt' into 'master'
...
gdma: separate tx/rx channel interrupt
Closes IDF-3181
See merge request espressif/esp-idf!13367
2021-05-06 16:38:44 +00:00
Alex Lisitsyn
ea6710ce98
soc/hal: add tinyusb support esp32s3
...
add usb hal/soc, usb_ll files and esp32s3 target for usb
move usb_hal.h into soc common folder
soc/hal: fix soc and periph for usb
tinyusb: fix tinyusb io header
hal: usb_ll fix pull up/down config for esp32s3
soc/hal: fix peripheral addresses
2021-05-06 16:20:54 +08:00
morris
6e981af406
gdma: separate tx/rx channel interrupt
2021-05-06 15:06:37 +08:00
Michael (XIAO Xufeng)
41937a9f97
Merge branch 'feature/support_spi_on_727' into 'master'
...
spi: support spi on 727
Closes IDF-3178
See merge request espressif/esp-idf!13346
2021-04-28 08:16:15 +00:00
Ivan Grokhotkov
9d34a1cd42
Merge branch 'bugfix/optimise_esp_timer_get_time' into 'master'
...
systimer: optimise esp_timer_get_time
See merge request espressif/esp-idf!13335
2021-04-27 08:52:09 +00:00
Armando
831b6127d7
spi: update interrupt set in spi_ll.h
2021-04-27 11:11:00 +08:00
morris
988c88a6b1
systimer: optimise esp_timer_get_time
2021-04-26 11:54:02 +08:00
Cao Sen Miao
0d81edb174
spi_flash: refactoring flash encryption into new api
2021-04-25 17:09:25 +08:00
Ivan Grokhotkov
ea7d020f20
Merge branch 'feature/ubsan' into 'master'
...
system: add option to enable undefined behavior sanitizer (UBSAN)
Closes IDF-166 and IDF-1824
See merge request espressif/esp-idf!11318
2021-04-23 09:27:42 +00:00
Angus Gratton
0be81903cc
Merge branch 'bugfix/hal_duplicated_interrupt_functions' into 'master'
...
[hal]: merged duplicated HAL layer functions
Closes IDF-2308
See merge request espressif/esp-idf!12444
2021-04-23 07:47:51 +00:00
Ivan Grokhotkov
e449728b7d
hal: fix planted break instruction for Xtensa targets
...
On Xtensa, "break 0, 0" encodes a software breakpoint which is placed
into the program by the debug monitor. Planted breakpoints (added in
the code to trap into debugger) should be encoded as "break 1, 15".
See table "Breakpoint Instruction Operand Conventions" in the ISA
Reference manual.
2021-04-22 23:33:47 +02:00
Ivan Grokhotkov
da90775d98
hal: mpu: fix signed overflow error
2021-04-22 23:33:47 +02:00
morris
ec898b771e
systimer: strip hal driver
2021-04-22 21:08:39 +08:00
Michael (XIAO Xufeng)
7e06a60c0d
Merge branch 'refactor/no_dac_on_esp32s3' into 'master'
...
dac: added DAC support macro
Closes IDF-1777
See merge request espressif/esp-idf!13038
2021-04-12 10:52:33 +00:00
Michael (XIAO Xufeng)
8cfcf6da7a
Merge branch 'bugfix/enable_gpio18_gpio19_esp32c3' into 'master'
...
gpio: Disable USB JTAG when setting pins 18 and 19 as GPIOs on ESP32C3
Closes IDF-2964
See merge request espressif/esp-idf!12753
2021-04-12 09:39:55 +00:00