Commit Graph

378 Commits

Author SHA1 Message Date
Armando
82ee8403b6 mmu: mmu_hal_check_valid_ext_vaddr_region 2023-02-17 13:04:55 +08:00
Laukik Hase
4cf889b692
memprot: Fix incorrect faulting address reported for esp32c3 & esp32s3
Co-authored-by: Mahavir Jain <mahavir@espressif.com>
2023-02-16 15:27:11 +05:30
jingli
9c37441b17 wdt: refactor wdt codes to use unified type 2023-02-15 12:08:55 +08:00
Armando
3afa671069 esp_adc: added adc digital filter feature 2023-02-10 16:46:20 +00:00
Song Ruo Jing
b69f983525 uart: Fix two TX concurrency issues
1. Concurrency might cause ESP_ERR_TIMEOUT when calling uart_wait_tx_done
2. Concurrency might cause RTS line being de-assreted during tx transmission for rs485 mode
2023-02-08 14:24:43 +08:00
Armando
d6844051fc esp_mm: new virtual memory mapping apis via mmu 2023-02-07 20:23:52 +08:00
morris
dbca74f1ef gdma: prevent mutli-channels connect to the same peripheral
1. add check in the gdma driver, to prevent multiple channels connecting
   to the same peripheral
2. memory copy DMA ID will occupy the peripheral's DMA ID on some ESP
   targets (e.g. esp32c3/s3). We should search for a free one when
install async memcpy driver.

Closes https://github.com/espressif/esp-idf/issues/10575
2023-01-31 15:18:19 +08:00
Song Ruo Jing
ad55230b0a ledc: Add support for esp32h2; Refactor ledc driver clock source selection related code
LEDC examples and test cases are supported on ESP32H2.
   Switch to use general clock IDs for ledc_clk_cfg_t enum values.
   Deprecate LEDC_USE_RTC8M_CLK.
2023-01-30 19:19:34 +08:00
Marius Vikhammer
e2d3f7c54c Merge branch 'feature/c6_wdt' into 'master'
wdt: add support for WDTs on C6

Closes IDF-5935 and IDF-5340

See merge request espressif/esp-idf!21038
2023-01-20 10:36:42 +08:00
Marius Vikhammer
5e9e8c396f wdt: add support for WDTs on C6 2023-01-19 12:58:26 +08:00
Kevin (Lao Kaiyao)
668e125dd4 Merge branch 'feature/support_i2s_on_h2' into 'master'
i2s: support i2s on esp32h2

Closes IDF-6219 and IDF-6700

See merge request espressif/esp-idf!21948
2023-01-19 10:47:33 +08:00
laokaiyao
c79187fdeb i2s: support i2s on esp32h2 2023-01-18 18:42:56 +08:00
wanlei
184145817c spi_master: add feature spi periph clk source selectable 2023-01-18 15:40:12 +08:00
morris
d9825f5165 Merge branch 'feature/add_clk_tree_get_frequency_api' into 'master'
clk_tree: Stage 4 - Add a general API to get the frequency of different clocks

Closes IDF-6569

See merge request espressif/esp-idf!21830
2023-01-17 17:08:23 +08:00
laokaiyao
c25fc7d242 i2s: fix incorrect sclk in legacy driver 2023-01-17 11:34:25 +08:00
Song Ruo Jing
c7c2462d39 system: Add complete support for disabling ROM logging by calling esp_deep_sleep_disable_rom_logging on C2, C3, and S3 2023-01-17 11:30:43 +08:00
Song Ruo Jing
2c9aa4559c clk_tree: Add a general API to get the frequency of different clocks
Add basic clk_tree driver and hal implementation.
2023-01-17 11:30:24 +08:00
Armando (Dou Yiwen)
d1b8da74d8 Merge branch 'refactor/improve_adc_power_maintanance' into 'master'
adc: improve adc power maintanance

Closes IDF-6114 and IDF-6318

See merge request espressif/esp-idf!21151
2023-01-12 20:30:36 +08:00
morris
f7c3d791a2 Merge branch 'feature/systimer_support_esp32h2' into 'master'
systimer: assign counter and alarm in esp_hw_support

Closes IDF-6484, IDF-5323, and IDF-6230

See merge request espressif/esp-idf!21984
2023-01-12 11:01:17 +08:00
morris
6c1d98d556 systimer: assign counter and alarm in esp_hw_support 2023-01-10 17:05:49 +08:00
jiangguangming
cceccb4ed9 hal: add rtc_cntl LL function for wake stub 2023-01-10 16:09:49 +08:00
C.S.M
faac178784 Merge branch 'feature/brownout_bringup_c6' into 'master'
BOD: Bringup for ESP32C6

Closes IDF-5345

See merge request espressif/esp-idf!21888
2023-01-10 14:42:43 +08:00
Cao Sen Miao
56a2d0b8a2 BOD: Bringup for ESP32C6 2023-01-10 10:37:30 +08:00
Armando
5be3c21cfc adc: improve power logic 2023-01-09 17:10:04 +08:00
Armando
f9da48d94f rtc: add pwdet and sar adc power related low level func 2023-01-09 17:09:01 +08:00
laokaiyao
6b631b68d1 sdm: correct concept duty to density 2023-01-06 17:01:48 +08:00
wanlei
971eaa0c08 spi_slave: fix spi_slave_isr iram_safe and add test case for it 2023-01-04 15:35:04 +08:00
laokaiyao
943dcd2cd1 i2s_pdm: fix tx frequency limitation
Closes: https://github.com/espressif/esp-idf/issues/10420
2022-12-29 16:31:03 +08:00
laokaiyao
5333ac81bf adc: support ADC on esp32c6 (driver/test/example) 2022-12-23 11:24:06 +08:00
laokaiyao
e27f3e3128 adc: support ADC on esp32c6 (hal) 2022-12-23 11:24:06 +08:00
laokaiyao
f44aa9bcc5 i2s: fixed rx update stuck bug 2022-12-20 14:49:35 +08:00
laokaiyao
cd5f2c3d76 i2s_test: add unity signal for synchronization 2022-12-20 14:49:35 +08:00
Song Ruo Jing
244d3caa97 i2s: Fix esp32c6 get I2S_CLK_SRC_PLL_160M clock frequency value wrong issue 2022-12-13 19:18:34 +08:00
morris
62f1cbca2c gpio: support glitch filter 2022-12-09 11:33:42 +08:00
KonstantinKondrashov
741e89cbaa esp_hw_support: Removes efuse dependency 2022-11-25 19:27:33 +08:00
Aditya Patwardhan
1c233cc508 hmac_hal: Merge hmac hal layer for different into one 2022-11-24 16:04:26 +05:30
Konstantin Kondrashov
b4580a1980 Merge branch 'feature/esp_timer_add_ll_for_rc_fast_clk' into 'master'
hal: Adds hal/ll func for SYSTIMER to select clock source: XTAL or RC_FAST_CLK

Closes IDF-5323

See merge request espressif/esp-idf!21136
2022-11-23 15:05:48 +08:00
KonstantinKondrashov
63f852adc8 hal: Adds hal/ll func for SYSTIMER to select clock source: XTAL or RC_FAST_CLK 2022-11-22 20:29:19 +08:00
Omar Chebib
cd21058097 C/Cxx: unify static assertions with the macro ESP_STATIC_ASSERT
Closes https://github.com/espressif/esp-idf/issues/9938
2022-11-21 16:18:08 +08:00
Simon Arlott
d1993c01f2 hal/uart_ll.h: Fix compile with C++
I'm including <hal/uart_ll.h> in my C++ application because I need to
bypass the uart driver. The inline functions in the header file fail to
compile as C++.

All of the enums need explicit casts for conversion to/from integers.

Merges https://github.com/espressif/esp-idf/pull/10106
2022-11-15 06:29:05 +00:00
Song Ruo Jing
eae70a8513 Merge branch 'bugfix/wakeup_io_hold_unhold_in_sleep' into 'master'
gpio: Fix deep sleep wakeup IOs unable to unhold after wakeup

Closes IDF-6122

See merge request espressif/esp-idf!20823
2022-11-14 12:48:40 +08:00
Song Ruo Jing
d0a7dc3e9f gpio: Fix IO hold function related problems
1. Fix deep sleep wakeup IOs can not be unhold issue
2. Correct hold related APIs' description
3. Fix gpio_force_hold_all API

docs: Add GPIO wakeup source to sleep_modes doc for ESP32C3 and C2
2022-11-11 20:39:04 +08:00
wangyuanze
6fc51c06c7 uart: force inline ll functions 2022-11-11 16:59:40 +08:00
C.S.M
86aa012c26 Merge branch 'feature/bringup_i2c_esp32c6' into 'master'
I2C: Add i2c support for ESP32C6

Closes IDF-5326 and IDF-5327

See merge request espressif/esp-idf!20905
2022-11-08 11:56:15 +08:00
Cao Sen Miao
803fc3fbe0 I2C: Add i2c support for ESP32C6 2022-11-07 14:12:53 +08:00
morris
a25123f703 twai: bringup on esp32c6 2022-11-04 17:40:29 +08:00
KonstantinKondrashov
1f9260d790 all: Apply new version logic (major * 100 + minor) 2022-11-03 08:36:23 +00:00
liuning
57c394c4e0 esp_wifi: add protection for mac reset 2022-10-31 06:41:42 +00:00
Armando
260ee86c37 rtc: united sar peripheral control 2022-10-27 16:51:25 +08:00
Song Ruo Jing
6d24e8bcf4 gpio: Add support for esp32c6 2022-10-18 12:38:36 +08:00
jingli
128d82eaaa hal/gpio_ll: fix digital gpio can not disable hold during deep sleep 2022-10-11 12:11:36 +08:00
jingli
b903a2253b esp_hw_support/sleep: fix current leakage when hold digital io during deep sleep 2022-10-11 12:11:28 +08:00
morris
b562754a2f rmt: support esp32c6 2022-09-17 04:56:49 +00:00
laokaiyao
bae4944b90 i2s: bringup i2s on esp32c6 2022-09-15 20:03:39 +08:00
laokaiyao
7197e987cb i2s: add XTAL clock source 2022-09-15 19:32:06 +08:00
morris
a1030307f1 gptimer: bringup driver on esp32c6 2022-09-13 10:50:58 +08:00
Simon
e923c15859 Merge branch 'refactor/i2c_hal' into 'master'
I2C: Refactor i2c hal and ll(pre-MR of I2C driver-NG)

See merge request espressif/esp-idf!19750
2022-09-02 10:47:35 +08:00
Cao Sen Miao
31b88a4c88 I2C: Refactor i2c hal and ll 2022-09-01 15:53:59 +08:00
wuzhenghui
1d299a8976 esp32c6: add hal support 2022-09-01 12:37:51 +08:00
wuzhenghui
c31aaeda2a ll: add reset interface to rtc_cntl_ll 2022-08-31 01:59:36 +00:00
Gao Xu
0da21aca0d Merge branch 'bugfix/fix_spi_hd_quad_issue_esp32c3' into 'master'
essl_spi: fix wrong dummy cycle under quad spi mode ant add a test to verify spi quad mod

Closes IDF-5182 and IDF-5181

See merge request espressif/esp-idf!18680
2022-08-30 10:53:11 +08:00
morris
995b89fbb6 gptimer: add API to get captured count value 2022-08-25 17:55:19 +08:00
gaoxu
3610b14aef SPI : fix wrong dummy cycle on quad mode and put get-command function in spi_ll.h
1.The dummy_bits is set to 4 in ESP32C3/C2, therefore, the data transmission started too early.This commit fix this issue by changing dummy_bits to 8.
2.Put the spi command the spi defintion in spi_types.h
3.Put the function which get spi command or dummy bits in spi_ll.h
2022-08-23 10:46:56 +08:00
Song Ruo Jing
72a15e3c7a Merge branch 'bugfix/gpio_usb_pin_pupd' into 'master'
gpio: fix USB D+ pin cannot disable pullup

Closes IDFGH-7984

See merge request espressif/esp-idf!19191
2022-08-22 17:18:05 +08:00
songruojing
01143bd732 gpio: fix USB D+ pin cannot disable pullup
Internally, disable usb serial jtag DP pin's pullup when calling gpio_ll_pullup_dis and rtcio_ll_pullup_disable
At usb serial jtag setup/install, re-enable DP pin's pullup

Closes https://github.com/espressif/esp-idf/issues/9495
2022-08-19 15:05:28 +08:00
Michael (XIAO Xufeng)
746f4b814c uart: move frequency of clock sources out of HAL 2022-08-15 18:55:43 +00:00
morris
6f2ac1ce2a rmt: add iram safe test
Closes https://github.com/espressif/esp-idf/issues/9487
2022-08-12 11:30:14 +08:00
morris
cf4cfc69ed esp_adc: add test with -O0 2022-08-02 23:07:06 +08:00
morris
a5a171926b rmt: add test with -O0 2022-08-02 23:07:06 +08:00
morris
031adc01c4 gpio: add test with -O0 2022-08-02 23:07:06 +08:00
morris
7faf1bee73 gptimer: add test with -O0 2022-08-02 22:53:36 +08:00
Armando
f325ad2211 mmu: fix wrong mmu end check
In mmu code, we follow the rule that the `end` address shouldn't be
touched. This commit fix wrong end address check in mmu_ll.h
2022-07-27 10:22:09 +00:00
morris
d94432fea8 systimer: refactor hal to accomodate more xtal choices 2022-07-25 16:08:52 +08:00
laokaiyao
edee3ee3cd i2s: add slot sequence table
Closes: https://github.com/espressif/esp-idf/issues/9208

When I2S is configured into different modes, the slot sequence varies.
This commit updates slot sequence tables and corresponding descriptions
in (both code and programming guide).
2022-07-21 15:52:39 +08:00
laokaiyao
90866e99fb i2s: add basic examples for STD/TDM/PDM mode 2022-07-21 15:52:39 +08:00
morris
4154eaec93 sdm: clean up soc/hal/ll code 2022-07-20 14:59:50 +08:00
Song Ruo Jing
4734b1433b Merge branch 'bugfix/gpio_hal_coverity_fix' into 'master'
gpio: Fix ESP32S3 GPIO48 does not support hold function bug and Fix coverity report

Closes IDF-4901

See merge request espressif/esp-idf!18805
2022-07-19 21:37:15 +08:00
Armando (Dou Yiwen)
9f6f61345b Merge branch 'feature/adc_driver_ng' into 'master'
ADC Driver NG

Closes IDF-4560, IDF-3908, IDF-4225, IDF-2482, IDF-4111, IDF-3610, IDF-4058, IDF-3801, IDF-3636, IDF-2537, IDF-4310, IDF-5150, IDF-5151, and IDF-4979

See merge request espressif/esp-idf!17960
2022-07-19 21:28:31 +08:00
Cao Sen Miao
53580a62b5 I2C: Fullfill the I2C clock tree, and support 26M XTAL on ESP32-C2 2022-07-19 11:41:42 +08:00
Armando
5b523a3313 esp_adc: new esp_adc component and adc drivers 2022-07-15 18:31:00 +08:00
songruojing
0c4b9a0101 gpio: Fix HAL bad bit shift operation on gpio_num_t reported from coverity
All gpio hal and ll functions input arguments gpio_num_t are changed to uint32_t type.
Validation of gpio num should be guaranteed from the driver layer.
2022-07-15 16:51:25 +08:00
Jiang Jiang Jian
b610b47a83 Merge branch 'feature/esp32s3_memprot_additional_improvements' into 'master'
[System/Security] Memprot after-merge improvements (v5.0)

Closes IDF-5263 and IDF-5208

See merge request espressif/esp-idf!18893
2022-07-13 15:48:20 +08:00
Song Ruo Jing
ea97cc93ea Merge branch 'feature/c2_systimer_26mhz' into 'master'
esp32c2: 26 MHz XTAL support: Kconfig option, systimer support

Closes IDF-5412 and IDF-5413

See merge request espressif/esp-idf!18835
2022-07-11 16:17:25 +08:00
Ivan Grokhotkov
5b54ae76d4 esp_timer, hal: add support for non-integer systimer frequency
When ESP32-C2 is paired with a 26 MHz XTAL, the systimer tick
frequency becomes equal to 26 / 2.5 = 10.4 MHz. Previously we always
assumed that systimer tick frequency is integer (and 1 MHz * power of
two, above that!).
This commit introduces a new LL macro, SYSTIMER_LL_TICKS_PER_US_DIV.
It should be set in such a way that:

1. SYSTIMER_LL_TICKS_PER_US / SYSTIMER_LL_TICKS_PER_US_DIV equals the
   actual systimer tick frequency,
2. and SYSTIMER_LL_TICKS_PER_US is integer.

For ESP32-C2 this means that SYSTIMER_LL_TICKS_PER_US = 52 and
SYSTIMER_LL_TICKS_PER_US_DIV = 5.

This introduced two possible issues:

1. Overflow when multiplying systimer counter by 5
   - Should not be an issue, since systimer counter is 52-bit, so
     counter * 5 is no more than 55-bit.
2. The code needs to perform:
   - divide by 5: when converting from microseconds to ticks
   - divide by 52: when converting from ticks to microseconds
   The latter potentially introduces a performance issue for the
   esp_timer_get_time function.
2022-07-11 12:24:37 +08:00
Martin Vychodil
0c87ae2a91 System/Security: Memprot API unified (ESP32S3)
Added missing features and improvements
2022-07-09 22:57:51 +02:00
Jiang Jiang Jian
a7bf3af687 Merge branch 'bugfix/reset_ble_hw_on_inititalization' into 'master'
component/bt: reset Bluetooth hardware during controller inititalization on ESP32-C3/ESP32-S3

Closes BT-2402

See merge request espressif/esp-idf!18831
2022-07-08 16:21:41 +08:00
Michael (XIAO Xufeng)
a58362a429 Merge branch 'feature/efuse_rev_major_minor' into 'master'
efuse: Adds major and minor versions

See merge request espressif/esp-idf!18255
2022-07-07 11:48:54 +08:00
wangmengyang
1d55f12c2d component/bt: reset Bluetooth hardware during controller inititalization on ESP32-C3/ESP32-S3
1. Rename MACROs SYSTEM_WIFI_RST_EN register bit fields to be more recognizable
2. reset Bluetooth baseband and clock bits to fix the issue of task watchdog triggered during controller initialization due to invalid hardware state
2022-07-06 16:23:48 +08:00
Cao Sen Miao
e218723e0e I2C: Make I2C clock frequency accurate 2022-07-06 11:58:08 +08:00
KonstantinKondrashov
0f8ff5aa15 efuse: Adds major and minor versions and others 2022-07-05 14:38:27 +08:00
Omar Chebib
cd48baf979 Refactor: move regi2c_*.h header files from esp_hw_support to soc component
When creating G0 layer, some regi2c_*.h headers were moved out from
esp_hw_support (G1) to soc (G0). In order to be consistent with that change,
move all the remaining regi2c_*.h headers to soc too.
2022-06-30 09:40:44 +00:00
Armando
31b3f31ef4 ext_mem: make memory region check strict 2022-06-28 14:17:44 +08:00
Cao Sen Miao
2c0651a671 Add regi2c enable/disable reference count 2022-06-23 15:36:44 +08:00
Cao Sen Miao
3a820462ac temperature_sensor: Add temperature sensor support for ESP32-C2 2022-06-23 15:36:43 +08:00
Omar Chebib
8fae0f0753 G0: Support Xtensa targets for G0-only compilation
G0-only example now supports Xtensa targets. This means that G0 layer
does not depend on G1+ layers anymore
2022-06-20 11:34:20 +00:00
Omar Chebib
752026a174 Merge branch 'refactor/remove_g0_dep_on_g1_riscv' into 'master'
G0: RISC-V targets have now an independent G0 layer

See merge request espressif/esp-idf!17926
2022-06-16 11:53:39 +08:00
laokaiyao
28b8fc6a7e i2s: update documents for driver-NG 2022-06-15 10:30:04 +08:00
laokaiyao
0fe3bb8ab7 i2s: update examples and unit-tests 2022-06-15 10:29:06 +08:00
laokaiyao
621d0aa942 i2s: Introduced a brand new driver 2022-06-15 10:29:06 +08:00
Darian
e213e66ba3 Merge branch 'refactor/esp_hw_support_cpu' into 'master'
esp_hw_support: Add new esp_cpu.h abstraction

Closes IDF-4769

See merge request espressif/esp-idf!17091
2022-06-14 21:11:30 +08:00