1. Deinit does not return ESP_ERR_WIFI_NOT_INIT if the wifi driver is no longer initialized.
2. Fix get wrong channel value use esp_wifi_get_config.
3. Fix bug of missing unlock when wifi stop.
4. Fix annotation error of api esp_wifi_connect.
Bugfix/make sure sempher and queue used in isr is in dram
Closes WIFI-3571, IDFGH-7458, IDFGH-7342, and IDFGH-7569
See merge request espressif/esp-idf!19160
This commit marks all functions in interrupt_controller_hal.h, cpu_ll.h and cpu_hal.h as deprecated.
Users should use functions from esp_cpu.h instead.
Fix dependency tree so that lwip doesn't depend on any specific network
interface component.
Network interface drivers shall depend on esp_netif.
esp_netif shall depend on lwip (but not on any specific interface
driver) -- it optionally depends on vfs and esp_eth (need ethernet
header for L2/bridge mode)
1. Rename MACROs SYSTEM_WIFI_RST_EN register bit fields to be more recognizable
2. reset Bluetooth baseband and clock bits to fix the issue of task watchdog triggered during controller initialization due to invalid hardware state
If appropriate interface is not set then RX callback can potentially dereference
null pointer from `s_wifi_netifs` table. This in-fact resulted in `LoadProhibited` exception
in HTTP server example test case.
Order here for setting interface and then registering callback was correct but
it was modified in 0e71a325de causing this regression.
The following functions are only defined when CONFIG_PM_ENABLE is defined:
- wifi_apb80m_request()
- wifi_apb80m_release()
This commit makes their linker script mapping statements also dependent on CONFIG_PM_ENABLE
thus fixing some linker errors when CONFIG_PM_ENABLE is disabled.
esp_wifi: add multiphy support for c2 and fix ftm with ps issue
Closes WIFI-4468, WIFI-4464, WIFI-4467, WIFI-4463, WIFI-4456, WIFI-4459, WIFI-4460, WIFI-4474, and WIFI-4505
See merge request espressif/esp-idf!18480
1. sleep: fix potential issue when PSRAM enable.
2. esp32c2: add multiphy support.
3. ftm: workaround for ftm with ps.
4. add regdomain max channel of ap.
5. update total scan time.
6. update min chan when country policy is auto.
7. check whether country schan and nchan is valid.
1. Fix not update phy according to country code.
2. Update regdomain max channel according to country info from nvs and or AP.
3. Change nvs default country from "CN" to "01".
4. Channel 14 is allowed only 11b mode.
5. Remove csa when switch channel from/to 14 channel.
6. Update phy mode nvs when softap channel from 14 to other.
7. Fix the bug that check whether channel parameter is valid.
Docs: change default country from "CN" to "01"
lwip was added to common requirements list to provide "sys/socket.h"
header to all components without additional requirements specified.
However, lwip pulls in a lot of dependencies on other components.
This commit removes lwip from common requirements to reduce the number
of components in G1-only apps.
To compensate for this removal, the following changes are made:
- newlib (which is a common requirement) has a public dependency on
lwip if lwip is present in the build. This ensures that sys/socket.h
is available as long as lwip component is included into the build.
- lwip is now a public requirement of esp-tls since esp_tls.h includes
sys/socket.h header.
- lwip is now a public requirement o esp_http_client because
sys/socket.h is included from esp_http_client.h
- lwip is now a private requirement of esp_wifi for "smartconfig_ack"
- lwip is now a private requirement of mqtt for socket functions
- lwip is now a public requirement of tcp_transport because
esp_transport_tcp.h includes sys/socket.h header.
- mbedtls checks if lwip component is present in the build. If yes,
net_sockets.c is added to the build, along with the dependency on
lwip. Previously lwip was a public requirement of mbedtls
unconditionally.
system/g1_components test app is updated to reflect the changes
Default public dependencies of a component before and after this
change, except common requirements:
- esp_timer (public dependency of freertos)
- bootloader_support (public dependency of esp_hw_support)
- vfs (public dependency of lwip)
- esp_wifi (public dependency of lwip)
- esp_event (public dependency of esp_wifi)
- esp_netif (public dependency of esp_event)
- esp_eth (public dependency of esp_netif)
- esp_phy (public dependency of esp_wifi)
After:
- esp_timer (public dependency of freertos)
- bootloader_support (public dependency of esp_hw_support)
Altogether, the following components have been always added as
public requirements to all other components, and are not added now
([breaking-change]):
- lwip
- vfs
- esp_wifi
- esp_event
- esp_netif
- esp_eth
- esp_phy
Application components now need to explicitly declare dependencies on
these components.
Some components were including esp_timer.h without declaring a
dependency on esp_timer component. This used to work due to a
transitive public dependency on esp_timer from freertos component.
Add explicit dependencies where needed.
Also some source files were using esp_timer functions without
including the header file. This used to work because esp_timer.h was
included from freertos port header file. This commit adds esp_timer.h
includes where needed.
Prior to this change "esp_wifi_clear_default_wifi_driver_and_handlers"
will not remove netif pointer from table when both AP and STA interfaces were
created and destroying default wifi interfaces is done in unfortunate
order. As a result there is dangling pointer left and it may cause crash in
later code (i.e. when esp_wifi_stop() is called).
1. Clean up clk usage in IDF, replace rtc_clk_xtal/apb_freq_get with
upper level API esp_clk_xtal/apb_freq
2. Fix small errors and wrong comments related to clock
3. Add clk_tree_defs.h to provide an unified clock id for each chip
Modify the NGed drivers to adopt new clock ids
PMF capable flag in wifi_pmf_config_t is internally enabled,
for devices to be able to connect to WPA3 only AP's without
additional user configuration. But PMF may need to be disabled
for debug purposes or to avoid PMF issues on AP side. Add API
esp_wifi_disable_pmf_config to support this.
This commit updates the visibility of various header files and cleans up
some unnecessary inclusions. Also, this commit removes certain header
include paths which were maintained for backward compatibility.
Moved the following kconfig options out of the target component:
* ESP32_X_BROWNOUT_* -> esp_system
* ESP32_X_DEBUG_OCDAWARE -> esp_system
* APP_NO_BLOBS -> build type (main kconfig)
While using esp_wifi_set_config, flag pmf_capable defaults to 0.
Users may not bother to enable it, which prevents connection to a
WPA3 AP. Or the AP may reset into WPA3 mode failing the re-connection.
To ensure better security, deprecate the pmf_capable flag and set it to
true internally.
This commit removes the usage of all legacy FreeRTOS data types that
are exposed via configENABLE_BACKWARD_COMPATIBILITY. Legacy types can
still be used by enabling CONFIG_FREERTOS_ENABLE_BACKWARD_COMPATIBILITY.
- add missing Wi-Fi header MD5 checks for esp32c3, esp32s3
- check PHY libraries for references to ets_printf, in addition to
checking Wi-Fi libraries. This used to happen until libphy.a was
moved into a separate submodule.
Reported in https://github.com/espressif/esp-phy-lib/issues/3
1. fix(pp): fix fragment plt loss when 2td pn compare with 1th pn
2. pmf allow keyindex in big endian format to workaround faulty APs
3. docs: update miswritten and abbreviated words and syntax errors for initialize WiFi section in esp_wifi.h header file
4. allow for minimal scope of wifi_init_config_t
Memory check (leaks and heap tracing) functions for unit tests
now have a separate file now and are renamed for more consistency.
BREAKING CHANGE: renamed memory check function names which may be used
in unit tests outside IDF.
Update wifi lib with below fixes -
1. In FTM Responder, add session timer for cleanup, also remove
unnecessary mutex locks
2. In FTM Responder, fix incorrect print in case of failure
while setting up the SofTAP
2. In FTM Initiator, increase FTM Request response timeout to
avoid failures in noisy environments
3. In FTM Initiator, abort for high start delta time, also fix
timeout issue in ASAP mode
Closes https://github.com/espressif/esp-idf/issues/7702
Closes https://github.com/espressif/esp-idf/issues/7753
peripheral enable/disable usually should be managed by driver itself,
so make it as espressif private APIs, not recommended for user to use it
in application code.
However, if user want to re-write the driver or ports to other platform,
this is still possible by including the header in this way:
"esp_private/peripheral_ctrl.h"
