Commit Graph

65 Commits

Author SHA1 Message Date
morris
236d601e98 mcpwm: reset peripheral in restart, panic and halt
mcpwm is commonly used in power eletronic area, when restart happens,
make sure the mcpwm generator is not working.

closes https://github.com/espressif/esp-idf/issues/11324
2023-05-09 18:30:46 +08:00
Marius Vikhammer
b07a534984 esp-system: move uncessary IRAM functions to flash 2023-04-24 10:27:31 +08:00
Marius Vikhammer
585f05596b system: fixed USE_FIXED_STATIC_RAM_SIZE option
The USE_FIXED_STATIC_RAM_SIZE was not actually causing the heap to start
at a fixed address.

Closes https://github.com/espressif/esp-idf/issues/10270
Closes https://github.com/espressif/esp-idf/issues/10271
2023-03-16 16:23:59 +08:00
Cao Sen Miao
8b5f4f54fc system: Clean up code, some single core chips have useless dual-core code 2023-03-13 10:27:57 +08:00
Gustavo Henrique Nihei
3cbac3dd1d esp_system: Ensure TIMG0 clock is always enabled during normal operation
If the TimerGroup 0 clock is disabled and then reenabled, the watchdog
registers (Flashboot protection included) will be re-enabled, and some
seconds later, will trigger an unintended reset.

Signed-off-by: Gustavo Henrique Nihei <gustavo.nihei@espressif.com>
2023-03-06 04:58:11 +00:00
Song Ruo Jing
1a66459b44 usb_serial_jtag: Improve the code for the issue of usb cdc device unable to work during sleep
1. Remove RTC_CLOCK_BBPLL_POWER_ON_WITH_USB Kconfig option
   During sleep, BBPLL clock always gets disabled
   esp_restart does not disable BBPLL clock, so that first stage bootloader log can be printed
2. Add a new Kconfig option PM_NO_AUTO_LS_ON_USJ_CONNECTED
   When this option is selected, IDF will constantly monitor USB CDC port connection status.
   As long as it gets connected to a HOST, automatic light-sleep will not happen.

Closes https://github.com/espressif/esp-idf/issues/8507
2023-02-27 12:10:49 +08:00
Li Shuai
526a9c665a backup dma: force clear reset signal to fix the backup dma operation failure caused by RTC_SW_CPU_RST 2022-10-20 03:24:49 +00:00
jingli
60c1811433 esp_hw_support/clk_cali: remove redundant check for cali value 2022-09-21 03:03:25 +00:00
Darian Leung
05ff1039dc esp_hw_support: Fix misuse of spinlocks as critical sections
Spinlocks themselves do not constitute critical sections as after a spinlock is acquired, interrupts
can remain enabled. However, there are some places where spinlocks are used direclty instead of using
the portMUX_TYPE and portENTER_CRITICAL_...() APIs. This commit fixes those calls.
2022-07-28 17:25:00 +08:00
Guillaume Souchere
6005cc9163 hal: Deprecate interrupt_controller_hal.h, cpu_hal.h and cpu_ll.h interfaces
This commit marks all functions in interrupt_controller_hal.h, cpu_ll.h and cpu_hal.h as deprecated.
Users should use functions from esp_cpu.h instead.
2022-07-22 00:06:06 +08:00
wangmengyang
1d55f12c2d component/bt: reset Bluetooth hardware during controller inititalization on ESP32-C3/ESP32-S3
1. Rename MACROs SYSTEM_WIFI_RST_EN register bit fields to be more recognizable
2. reset Bluetooth baseband and clock bits to fix the issue of task watchdog triggered during controller initialization due to invalid hardware state
2022-07-06 16:23:48 +08:00
Darian
e213e66ba3 Merge branch 'refactor/esp_hw_support_cpu' into 'master'
esp_hw_support: Add new esp_cpu.h abstraction

Closes IDF-4769

See merge request espressif/esp-idf!17091
2022-06-14 21:11:30 +08:00
Darian Leung
a8a3756b38 hal: Route CPU and Interrupt Controller HAL/LL to esp_cpu calls
This commit makes changes to cpu_ll.h, cpu_hal.h, and interrupt_controller_hal.h:

- Moved to esp_hw_support in order to be deprecated in the future
- HAL/LL API now route their calls to esp_cpu.h functions instead

Also updated soc_hal.h as follows:

- Removed __SOC_HAL_..._OTHER_CORES() macros as they dependend on cpu_hal.h
- Made soc_hal.h and soc_ll.h interfaces always inline, and removed soc_hal.c.

This commit also updates the XCHAL_ERRATUM_572 workaround by

- Removing it's HAL function and invoking the workaround it directly the bootloader
- Added missing workaround for the ESP32-S3
2022-06-14 14:40:03 +08:00
songruojing
03477a59db rtc_clk: Fix rtc8m calibration failure after cpu/core reset
1. make sure 8md256 clk is enabled before calibration
2. improve bootloader and application startup 8m, 8md256 enable logic
2022-06-13 17:47:51 +08:00
KonstantinKondrashov
ac4c7d99fe dport: Move DPORT workaround to G0 2022-05-31 13:44:18 +08:00
morris
4352c39e3e Merge branch 'feature/cache_c2_support' into 'master'
cache: access error & illegal error ll functions

Closes IDF-3820

See merge request espressif/esp-idf!18203
2022-05-30 11:40:11 +08:00
Song Ruo Jing
cf32e49aeb Merge branch 'refactor/cleanup_rtc_h' into 'master'
clk_tree: Prework2 of introducing clock subsystem control

Closes IDF-4934

See merge request espressif/esp-idf!17861
2022-05-26 09:16:47 +08:00
songruojing
a5b09cf015 rtc_clk: Clean up some clock related enum and macro in soc/rtc.h, replace with new ones in
soc/clk_tree_defs.h
2022-05-24 22:59:41 +08:00
Marius Vikhammer
0687daf2c8 kconfig: move remaining kconfig options out of target component
The kconfig options are moved to the component where they are used,
mostly esp_hw_support and esp_system.
2022-05-23 17:57:45 +08:00
Armando
8532d09259 cache: access error & illegal error ll functions 2022-05-23 15:00:47 +08:00
Darian Leung
bd8b03888c esp_system: Tidy up INT WDT
This commit tidys the INT WDT code formatting, comments, and API descriptions.
2022-05-18 20:12:25 +08:00
Marius Vikhammer
d2872095f9 soc: moved kconfig options out of the target component.
Moved the following kconfig options out of the target component:
 * CONFIG_ESP*_DEFAULT_CPU_FREQ* -> esp_system
 * ESP*_REV_MIN -> esp_hw_support
 * ESP*_TIME_SYSCALL -> newlib
 * ESP*_RTC_* -> esp_hw_support

Where applicable these target specific konfig names were merged into
a single common config, e.g;
CONFIG_ESP*_DEFAULT_CPU_FREQ -> CONFIG_ESP_DEFAULT_CPU_FREQ_MHZ
2022-04-21 12:09:43 +08:00
Ivan Grokhotkov
c70a69b1dd Merge branch 'bugfix/remove_ref_non_ex_options' into 'master'
config: removed references to non-existing kconfig options

See merge request espressif/esp-idf!17495
2022-03-25 18:02:54 +08:00
Marius Vikhammer
0fbae992dd config: removed references to non-existing kconfig options 2022-03-15 18:32:22 +08:00
Marius Vikhammer
ca3c056ac9 kconfig: replace deprecated options with new values 2022-03-15 16:28:53 +08:00
Marius Vikhammer
934a3951b8 Merge branch 'feature/s2_s3_support_ext_mem_stack' into 'master'
soc: support placing task stacks in external memory for S2 and S3

Closes IDF-2797 and IDF-1805

See merge request espressif/esp-idf!16186
2022-03-09 11:57:31 +08:00
Sudeep Mohanty
a9fda54d39 esp_hw_support/esp_system: Re-evaluate header inclusions and include directories
This commit updates the visibility of various header files and cleans up
some unnecessary inclusions. Also, this commit removes certain header
include paths which were maintained for backward compatibility.
2022-03-07 11:18:08 +05:30
Marius Vikhammer
e543e97c7b system: fix SET_STACK macro crashing in windowoverflow8 exception
If a windowoverflow8 happened after changing the SP, the exception handler would look for
the extra save area by looking at the previous frame's SP. This SP would be a garbage value
and could cause the windowoverflow exception to write to invalid memory ares.
2022-03-04 15:25:52 +08:00
Marius Vikhammer
bb88338118 system: move kconfig options out of target component
Moved the following kconfig options out of the target component:
 * ESP32_X_BROWNOUT_* -> esp_system
 * ESP32_X_DEBUG_OCDAWARE -> esp_system
 * APP_NO_BLOBS -> build type (main kconfig)
2022-03-02 01:22:26 +00:00
Song Ruo Jing
40d1102ca5 Merge branch 'bugfix/cpu_reset_perip_clk_disable' into 'master'
esp_system: change range comparsion for reset reason to specifc cpu reset reason comparison

See merge request espressif/esp-idf!15492
2022-02-10 03:44:15 +00:00
songruojing
c1dedb33fa esp_system: replace the range comparsion for reset reason in perip clk init with specific reset reason check, also add a test case in LEDC to check for the perip clk not being disabled after cpu reset 2022-02-09 15:54:34 +08:00
morris
ef00bd59dc esp_rom: extract int matrix route and cpu ticks getter 2022-02-09 13:52:20 +08:00
Darian Leung
3336b057d6 xtensa: Move saving of a0 register to match upstream
Upstream xtensa exception handling will save PS, PC, and a0 registers
together when saving a minimal context. This commit ppdates the xtensa
exception handling to match upstream behavior.
2022-02-03 17:08:14 +08:00
Sudeep Mohanty
e22b4007d3 esp_hw_support: Removed deprecated CPU util functions
The following files were deleted:
- components/esp_hw_support/include/soc/cpu.h
- components/soc/esp32s3/include/soc/cpu.h

The following functions are deprecated:
- get_sp()

The following functions declared in soc/cpu.h are now moved to esp_cpu.h:
- esp_cpu_configure_region_protection()

The following functions declared in soc/cpu.h are now moved to components/xtensa/include/esp_cpu_utils.h:
- esp_cpu_process_stack_pc()

All files with soc/cpu.h inclusion are updated to include esp_cpu.h instead.

Signed-off-by: Sudeep Mohanty <sudeep.mohanty@espressif.com>
2021-12-28 16:58:37 +05:30
Cao Sen Miao
c794808297 cache_err_int: delete old headers 2021-11-26 14:56:30 +08:00
Cao Sen Miao
eddc196081 esp_clk: refactor target/clk.h to private/esp_clk.h 2021-11-26 14:56:30 +08:00
Omar Chebib
9d5923a13e IPC: Move ipc sources to esp_system
IPC shall be put back into esp_system as it is an 'OS additions'.
2021-11-11 10:30:01 +08:00
morris
16677b0d3c global: make periph enable/disable APIs private
peripheral enable/disable usually should be managed by driver itself,
so make it as espressif private APIs, not recommended for user to use it
in application code.
However, if user want to re-write the driver or ports to other platform,
this is still possible by including the header in this way:
"esp_private/peripheral_ctrl.h"
2021-11-08 10:37:47 +08:00
Alexey Gerenkov
bb9cd84cdc debug_stubs: Refactor and add support for RISCV 2021-11-04 01:33:24 +03:00
Mahavir Jain
bdeaeb8d7f esp_system: enable "cache disable but cache accessed" interrupt for ESP32-S3 2021-10-20 15:16:25 +05:30
Omar Chebib
8048677b4c Xtensa: Branch and jump intructions referencing a relative label have been replaced
As branches/jumps on Xtensa have a maximum range for the destination, it is
unsafe to refer to a label to another compilation unit in a branch/jump instruction.
The labels have been replaced by absolute addresses.
2021-10-19 12:21:12 +08:00
Armando
c45c6f52f1 adc: support adc efuse-based calibration on esp32s3 2021-09-14 11:42:50 +08:00
Jiang Jiang Jian
6e1f8a68b9 Merge branch 'feature/support_esp32s3_wifi_lightsleep' into 'master'
support esp32s3 wifi lightsleep

Closes IDF-1781

See merge request espressif/esp-idf!14569
2021-08-06 12:51:46 +00:00
Li Shuai
d73a09cd8b light sleep: add wifi mac sleep support for esp32s3 2021-08-04 21:58:33 +08:00
Li Shuai
366d0a724a light sleep: set wifi light sleep clock source to rtc slow clock 2021-08-04 21:31:47 +08:00
Konstantin Kondrashov
29f581fc70 freertos(esp32s3): SysTick uses systimer 2021-08-04 20:33:44 +08:00
Konstantin Kondrashov
4972605b16 esp_common: Add API for IPC to run small pieces of code on the other CPU, in the context of the level 4 interrupt 2021-08-03 14:35:29 +08:00
morris
1560d6f1ba soc: add reset reasons in soc component 2021-07-13 10:45:38 +08:00
Angus Gratton
57fa883127 esp32s3: Remove APB frequency RTC register
Usage of this register changed between ESP32-S3 beta2 and the
final chip.
2021-06-29 17:38:46 +10:00
Marius Vikhammer
f124536948 system: add support for reset reason hint on S3 2021-06-15 13:39:51 +08:00