sdmmc, sdspi: fixes related to status checks, R1b response support, erase fix for SPI mode, fix for erase timeout calculation
Closes IDF-4728
See merge request espressif/esp-idf!17727
Same as for write operation, some errors are reported only via CMD13.
Without the R1b response support in sdspi driver, this check would
fail. Now that R1b support is implemented, erase command response is
zero (success) on all cards under test.
Also remove the now-unnecessary card reset after erase in the test
case.
options.
Erase command (38) for SD cards allows option for erase/dicard/fule
operation at block level and for MMC cards supports option for
discard/trim at block level. When Sanitize is executed only the
portion of data that was unmapped by a Discard command shall be
removed by the Sanitize command.
Unit test cases added to verify ERASE feature in SD/SDSPI mode.
TRIM/DISCARD/SANITIZE tests for eMMC devices.
Closes https://github.com/espressif/esp-idf/pull/7635
Closes https://github.com/espressif/esp-idf/issues/7623
* changing dependencies from unity->cmock
* added component.mk and Makefile.projbuild
* ignore test dir in gen_esp_err_to_name.py
* added some brief introduction of CMock in IDF
SD cards don't support CMD7 (select_card) in SPI mode. Highspeed probe
of sdspi will fail in this step and stop working in highspeed mode.
Remove the CMD7 in enable_hs_mode_and_check to fix this issue.
Please note that, on ESP32, you have to use the IOMUX pins to use sdspi
in 40MHz, otherwise the initialization process will report reading issue
and fail.
DISABLED_FOR_TARGETS macros are used
Partly revert "ci: disable unavailable tests for esp32s2beta"
This partly reverts commit 76a3a5fb48.
Partly revert "ci: disable UTs for esp32s2beta without runners"
This partly reverts commit eb158e9a22.
Partly revert "fix unit test and examples for s2beta"
This partly reverts commit 9baa7826be.
Partly revert "efuse: Add support for esp32s2beta"
This partly reverts commit db84ba868c.
Using xxx_periph.h in whole IDF instead of xxx_reg.h, xxx_struct.h, xxx_channel.h ... .
Cleaned up header files from unnecessary headers (releated to soc/... headers).
1. New tests for SD card on slot 0. Currently frequency for 4-bit mode
has to be reduced in the test.
2. Change pin for CD/WP tests, re-enable CD tests.
CMD53 in byte mode supports transfers of any number of bytes between 1
and 512. This change removes limitation that the number of bytes must
be divisible by 4. Host quirk, that such transfers must be split into
two commands (one for the aligned part and the other one for
unaligned) is taken into account.
