CI: add S3 default_2 unit test config

.gitlab/ci/target-test.yml

@@ -687,7 +687,7 @@ UT_C3_FLASH_SUSPEND:
 
 UT_S3:
   extends: .unit_test_esp32s3_template
-  parallel: 20
+  parallel: 25
   tags:
     - ESP32S3_IDF
     - UT_T1_1

components/esp_hw_support/test/test_rtc_clk.c

@@ -315,8 +315,6 @@ TEST_CASE("Test starting 'External 32kHz XTAL' on the board without it.", "[rtc_
 
 #endif
 
-static RTC_NOINIT_ATTR int64_t start = 0;
-
 TEST_CASE("Test rtc clk calibration compensation", "[rtc_clk]")
 {
     int64_t t1 = esp_rtc_get_time_us();
@@ -344,6 +342,11 @@ TEST_CASE("Test rtc clk calibration compensation", "[rtc_clk]")
     TEST_ASSERT_GREATER_THAN(t1, t2);
 }
 
+#if !TEMPORARY_DISABLED_FOR_TARGETS(ESP32S3)
+/* Disabled until deep sleep is brought up TODO ESP32-S3 IDF-2691 */
+
+static RTC_NOINIT_ATTR int64_t start = 0;
+
 static void trigger_deepsleep(void)
 {
     printf("Trigger deep sleep. Waiting for 10 sec ...\n");
@@ -392,3 +395,5 @@ static void check_time_deepsleep_2(void)
 }
 
 TEST_CASE_MULTIPLE_STAGES("Test rtc clk calibration compensation across deep sleep", "[rtc_clk][reset=DEEPSLEEP_RESET, DEEPSLEEP_RESET]", trigger_deepsleep, check_time_deepsleep_1, check_time_deepsleep_2);
+
+#endif // !TEMPORARY_DISABLED_FOR_TARGETS(ESP32S3)

components/esp_lcd/test/test_rgb_panel.c

@@ -31,6 +31,10 @@
 #define TEST_LCD_DISP_EN_GPIO  (-1)
 
 #if SOC_LCD_RGB_SUPPORTED
+
+#if !TEMPORARY_DISABLED_FOR_TARGETS(ESP32S3)
+/* Not enough memory for framebuffer when running in default_2 config */
+
 TEST_CASE("lcd rgb lcd panel", "[lcd]")
 {
 #define TEST_IMG_SIZE (100 * 100 * sizeof(uint16_t))
@@ -161,4 +165,7 @@ TEST_CASE("lvgl gui with rgb interface", "[lcd][lvgl][ignore]")
     test_lvgl_task_loop(panel_handle, TEST_LCD_H_RES, TEST_LCD_V_RES, &disp);
 }
 #endif // CONFIG_LV_USE_USER_DATA
+
+#endif //!TEMPORARY_DISABLED_FOR_TARGETS(ESP32S3)
+
 #endif // SOC_LCD_RGB_SUPPORTED

components/esp_wifi/test/test_wifi.c

@@ -23,8 +23,8 @@
 
 #define EVENT_HANDLER_FLAG_DO_NOT_AUTO_RECONNECT 0x00000001
 
-#if !TEMPORARY_DISABLED_FOR_TARGETS(ESP32S2, ESP32C3)
-/* TODO ESP32-S2 IDF-2618, TODO ESP32-C3 IDF-2618 */
+#if !TEMPORARY_DISABLED_FOR_TARGETS(ESP32S2, ESP32S3, ESP32C3)
+/* TODO IDF-2618 */
 static const char* TAG = "test_wifi";
 static uint32_t wifi_event_handler_flag;
 

components/sdmmc/test/test_sd.c

@@ -33,11 +33,12 @@
 #include "esp_rom_gpio.h"
 #include "test_utils.h"
 
-#define WITH_SD_TEST    (SOC_SDMMC_HOST_SUPPORTED)
-//Currently no runners for S2 and C3
-#define WITH_SDSPI_TEST (!TEMPORARY_DISABLED_FOR_TARGETS(ESP32S2, ESP32C3))
+// Currently no runners for S3
+#define WITH_SD_TEST    (SOC_SDMMC_HOST_SUPPORTED && !TEMPORARY_DISABLED_FOR_TARGETS(ESP32S3))
+//Currently no runners for S2, S3 and C3
+#define WITH_SDSPI_TEST (!TEMPORARY_DISABLED_FOR_TARGETS(ESP32S2, ESP32S3, ESP32C3))
 // Can't test eMMC (slot 0) and PSRAM together
-#define WITH_EMMC_TEST  (SOC_SDMMC_HOST_SUPPORTED && !CONFIG_SPIRAM)
+#define WITH_EMMC_TEST  (SOC_SDMMC_HOST_SUPPORTED && !CONFIG_SPIRAM && !TEMPORARY_DISABLED_FOR_TARGETS(ESP32S3))
 
 /* power supply enable pin */
 #define SD_TEST_BOARD_VSEL_EN_GPIO  27

components/wpa_supplicant/test/test_offchannel.c

@@ -32,7 +32,8 @@
 
 #define TEST_LISTEN_CHANNEL     6
 
-#if !TEMPORARY_DISABLED_FOR_TARGETS(ESP32S2, ESP32C3)
+/* No runners */
+#if !TEMPORARY_DISABLED_FOR_TARGETS(ESP32S2, ESP32S3, ESP32C3)
 
 static const char *TAG = "test_offchan";
 esp_netif_t *wifi_netif;

tools/unit-test-app/configs/default_2_s3

@@ -0,0 +1,3 @@
+# This config is split between targets since different component needs to be excluded (esp32, esp32s2)
+CONFIG_IDF_TARGET="esp32s3"
+TEST_EXCLUDE_COMPONENTS=libsodium bt app_update freertos esp32s3 esp_ipc esp_pm esp_system esp_timer driver heap pthread soc spi_flash vfs experimental_cpp_component esp-tls test_utils