alex/esp-idf
alex/esp-idf
1
0
Fork 0
mirror of https://github.com/espressif/esp-idf.git synced 2024-10-05 20:47:46 -04:00
Code Issues Actions 2 Packages Projects Releases Wiki Activity

driver: fix gpio pin_bit_mask truncation in sdspi_host and others

Browse Source 
Closes https://github.com/espressif/esp-idf/issues/4348
This commit is contained in:
Ivan Grokhotkov 2019-11-18 13:42:22 +01:00
parent 59d818c387
commit 5b6b624e1f
5 changed files with 13 additions and 13 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

2
components/driver/sdmmc_host.c
View File

@ -344,7 +344,7 @@ esp_err_t sdmmc_host_init_slot(int slot, const sdmmc_slot_config_t* slot_config)
// Force D3 high to make slave enter SD mode.
// Connect to peripheral after width configuration.
gpio_config_t gpio_conf = {
.pin_bit_mask = BIT(pslot->d3_gpio),
.pin_bit_mask = BIT64(pslot->d3_gpio),
.mode = GPIO_MODE_OUTPUT ,
.pull_up_en = 0,
.pull_down_en = 0,

8
components/driver/sdspi_host.c
View File

@ -315,7 +315,7 @@ esp_err_t sdspi_host_init_slot(int slot, const sdspi_slot_config_t* slot_config)
gpio_config_t io_conf = {
.intr_type = GPIO_PIN_INTR_DISABLE,
.mode = GPIO_MODE_OUTPUT,
.pin_bit_mask = 1LL << slot_config->gpio_cs,
.pin_bit_mask = 1ULL << slot_config->gpio_cs,
};
ret = gpio_config(&io_conf);
@ -333,14 +333,14 @@ esp_err_t sdspi_host_init_slot(int slot, const sdspi_slot_config_t* slot_config)
.pull_up_en = true
};
if (slot_config->gpio_cd != SDSPI_SLOT_NO_CD) {
io_conf.pin_bit_mask |= (1 << slot_config->gpio_cd);
io_conf.pin_bit_mask |= (1ULL << slot_config->gpio_cd);
s_slots[slot].gpio_cd = slot_config->gpio_cd;
} else {
s_slots[slot].gpio_cd = GPIO_UNUSED;
}
if (slot_config->gpio_wp != SDSPI_SLOT_NO_WP) {
io_conf.pin_bit_mask |= (1 << slot_config->gpio_wp);
io_conf.pin_bit_mask |= (1ULL << slot_config->gpio_wp);
s_slots[slot].gpio_wp = slot_config->gpio_wp;
} else {
s_slots[slot].gpio_wp = GPIO_UNUSED;
@ -360,7 +360,7 @@ esp_err_t sdspi_host_init_slot(int slot, const sdspi_slot_config_t* slot_config)
.intr_type = GPIO_INTR_LOW_LEVEL,
.mode = GPIO_MODE_INPUT,
.pull_up_en = true,
.pin_bit_mask = (1 << slot_config->gpio_int),
.pin_bit_mask = (1ULL << slot_config->gpio_int),
};
ret = gpio_config(&io_conf);
if (ret != ESP_OK) {

10
components/driver/test/esp32/test_pwm.c
View File

@ -270,7 +270,7 @@ static void cycle_fault_test(mcpwm_unit_t unit, mcpwm_io_signals_t mcpwm_a, mcpw
gpio_config_t gp;
gp.intr_type = GPIO_INTR_DISABLE;
gp.mode = GPIO_MODE_OUTPUT;
gp.pin_bit_mask = (1 << FAULT_SIG_NUM);
gp.pin_bit_mask = (1ULL << FAULT_SIG_NUM);
gpio_config(&gp); // gpio configure should be more previous than mcpwm configuration
gpio_set_level(FAULT_SIG_NUM, !input_sig);
@ -299,7 +299,7 @@ static void oneshot_fault_test(mcpwm_unit_t unit, mcpwm_io_signals_t mcpwm_a, mc
gpio_config_t gp;
gp.intr_type = GPIO_INTR_DISABLE;
gp.mode = GPIO_MODE_OUTPUT;
gp.pin_bit_mask = (1 << FAULT_SIG_NUM);
gp.pin_bit_mask = (1ULL << FAULT_SIG_NUM);
gpio_config(&gp); // gpio configure should be more previous than mcpwm configuration
gpio_set_level(FAULT_SIG_NUM, !input_sig);
@ -327,7 +327,7 @@ static void sync_test(mcpwm_unit_t unit, mcpwm_io_signals_t mcpwm_a, mcpwm_io_si
gpio_config_t gp;
gp.intr_type = GPIO_INTR_DISABLE;
gp.mode = GPIO_MODE_OUTPUT;
gp.pin_bit_mask = (1 << SYN_SIG_NUM);
gp.pin_bit_mask = (1ULL << SYN_SIG_NUM);
gpio_config(&gp);
gpio_set_level(SYN_SIG_NUM, 0);
@ -425,10 +425,10 @@ static void gpio_test_signal(void *arg)
{
printf("intializing test signal...\n");
gpio_config_t gp;
gpio_config_t gp = {};
gp.intr_type = GPIO_INTR_DISABLE;
gp.mode = GPIO_MODE_OUTPUT;
gp.pin_bit_mask = 1<<CAP_SIG_NUM;
gp.pin_bit_mask = 1ULL << CAP_SIG_NUM;
gpio_config(&gp);
for (int i=0; i<1000; i++) {
//here the period of test signal is 20ms

2
components/sdmmc/test/test_sdio.c
View File

@ -129,7 +129,7 @@ static void reset_slave(void)
const int pin_en = 18;
const int pin_io0 = 19;
gpio_config_t gpio_cfg = {
.pin_bit_mask = BIT(pin_en) | BIT(pin_io0),
.pin_bit_mask = BIT64(pin_en) | BIT64(pin_io0),
.mode = GPIO_MODE_OUTPUT_OD,
};
TEST_ESP_OK(gpio_config(&gpio_cfg));

4
examples/peripherals/sdio/host/main/app_main.c
View File

@ -126,7 +126,7 @@ esp_err_t slave_reset(esp_slave_context_t *context)
static void gpio_d2_set_high(void)
{
gpio_config_t d2_config = {
.pin_bit_mask = BIT(SDIO_SLAVE_SLOT1_IOMUX_PIN_NUM_D2),
.pin_bit_mask = BIT64(SDIO_SLAVE_SLOT1_IOMUX_PIN_NUM_D2),
.mode = GPIO_MODE_OUTPUT,
.pull_up_en = true,
};
@ -267,7 +267,7 @@ void slave_power_on(void)
level_active = 1;
#endif
gpio_config_t cfg = {
.pin_bit_mask = BIT(GPIO_B1) | BIT(GPIO_B2) | BIT(GPIO_B3),
.pin_bit_mask = BIT64(GPIO_B1) | BIT64(GPIO_B2) | BIT64(GPIO_B3),
.mode = GPIO_MODE_DEF_OUTPUT,
.pull_up_en = false,
.pull_down_en = false,