Cao Sen Miao
dfff867379
fix(tempertuer_sensor): Fix regs on temperature sensor is not volatile due to GCC bug
2023-12-15 16:41:16 +08:00
Cao Sen Miao
9dd90e2d9b
fix(bod): Reset brownout in configuration to avoid RF cannot be enabled again
2023-12-07 10:33:58 +08:00
Jiang Jiang Jian
b09e1d860d
Merge branch 'bugfix/fix_psram_access_faild_after_pd_cpu_wakeup_v5.1' into 'release/v5.1'
...
fix(esp_pm): fix psram access failed after pd_cpu wakeup if uart driver driven console is used (backport v5.1)
See merge request espressif/esp-idf!27051
2023-11-22 17:44:32 +08:00
Shu Chen
ecbbd3c3d9
Merge branch 'backport/add_ot_radio_stats_enable_config_5_1' into 'release/v5.1'
...
feat(openthread): backport some openthread features(BackportV5.1)
See merge request espressif/esp-idf!26885
2023-11-22 12:23:53 +08:00
morris
64e7343e40
Merge branch 'bugfix/fix_adc_read_zero_h2_v5.1' into 'release/v5.1'
...
ADC: fix adc raw data get 0 because of signal delay on ESP32H2(v5.1)
See merge request espressif/esp-idf!26976
2023-11-21 11:08:57 +08:00
Jiang Jiang Jian
0e1ec38785
Merge branch 'bugfix/fix_lightsleep_current_leakage_on_usj_pad_v5.1' into 'release/v5.1'
...
fix(esp_hw_support): fix lightsleep current leakage on usb pad (backport v5.1)
See merge request espressif/esp-idf!27205
2023-11-21 10:51:11 +08:00
morris
ddb6d22468
Merge branch 'feature/gpio_dump_io_info_v5.1' into 'release/v5.1'
...
feat(gpio): add a dump API to dump IO configurations (v5.1)
See merge request espressif/esp-idf!26870
2023-11-17 16:30:22 +08:00
morris
ceb0aec0cc
Merge branch 'bugfix/rmt_stop_issue_v5.1' into 'release/v5.1'
...
fix(rmt): a disabled channel may pick up a pending transaction (v5.1)
See merge request espressif/esp-idf!26779
2023-11-17 16:27:21 +08:00
gaoxu
1179d9859f
fix(adc): fix h2 adc oneshot read zero and add delay after getting done signal v5.1
2023-11-17 02:16:21 +00:00
wuzhenghui
6ae596c764
fix(esp_hw_support): fix lightsleep current leakage on usb-phy controlled pad
2023-11-16 20:03:30 +08:00
wuzhenghui
46dae91a39
fix(esp_pm): fix psram access faild after pd_cpu wakeup
2023-11-16 03:20:27 +00:00
morris
bfeae3857c
feat(rmt): support calling rmt_receive in ISR callback
2023-11-15 05:57:45 +00:00
Chen Jichang
0ce2683d81
feature(MCPWM): Add MCPWM trigger driver and test
...
Each MCPWM operator has two Trigger (named T0 and T1), and they can be
routed to GPIO fault signal or timer sync event.Generator can be set up
to perform different action on Trigger event.
This commit add a trigger driver and a test for the driver.
2023-11-15 05:57:37 +00:00
Jiang Jiang Jian
0172c33818
Merge branch 'bugfix/fix_deinit_init_wifi_scan_fail_issue_v5.1' into 'release/v5.1'
...
Bugfix/fix deinit init wifi scan fail issue v5.1(Backport v5.1)
See merge request espressif/esp-idf!27064
2023-11-14 15:25:54 +08:00
morris
efafacae40
Merge branch 'feature/mcpwm_timer_change_freq_v5.1' into 'release/v5.1'
...
feat(mcpwm): support update timer period dynamically (v5.1)
See merge request espressif/esp-idf!26624
2023-11-13 17:55:52 +08:00
muhaidong
abfd0cbebc
change(hal): remove useless code from periph_ll_wifi_bt_module_enable_clk
2023-11-10 11:15:49 +08:00
Armando
6de9757a4b
fix(adc): rename ADC_ATTEN_DB_11 to ADC_ATTEN_DB_12
...
By design, it's 12 dB. There're errors among chips, so the actual
attenuation will be 11dB more or less
2023-11-07 14:09:21 +08:00
Song Ruo Jing
4892c481b5
feat(gpio): add a dump API to dump IO configurations
...
Merges https://github.com/espressif/esp-idf/pull/12511
2023-11-03 16:21:31 +08:00
Lou Tianhao
9b3e40c9d1
feat(pm/deepsleep): Support EXT1_WAKEUP_MODE_PER_PIN
2023-11-03 11:02:56 +08:00
morris
9b4a42e728
feat(mcpwm): support update timer period dynamically
...
Implement the requirement asked in
https://www.esp32.com/viewtopic.php?f=13&t=35919
2023-10-24 10:11:47 +08:00
Eduardo Lacerda Campos
9cd0aee51b
fix(uart): Fix uart_ll_set_baudrate div-by-zero crash due to uint32_t overflow
...
Merges https://github.com/espressif/esp-idf/pull/12179
2023-09-19 12:12:05 +08:00
Chen Jichang
d8e5b2ac41
feat(mcpwm): Set group clock prescale dynamically
...
MCPWM group clock pre scale was originally fixed to 2, which is
inconvenient. Set group clock prescale dynamically. Now the maximum
resolution of the MCPWM timer is up to 160MHz(when the prescale set
to 1). And add a resulotion config for MCPWM capture.
2023-09-11 11:29:28 +08:00
Chen Jichang
c240a1f46b
feat(MCPWM): Add mcpwm carrier clk source
...
The MCPWM carrier is part of the operator and can work independently
without the MCPWM timer being enabled. This commit add the MCPWM
carrier clk source.
2023-08-25 17:34:58 +08:00
morris
f41df5641a
Merge branch 'bugfix/gptimer_hal_placement_wrong_condition_v5.1' into 'release/v5.1'
...
fix(gptimer): hal function placement under wrong condition (v5.1)
See merge request espressif/esp-idf!25280
2023-08-23 23:21:20 +08:00
morris
77b74ab091
Merge branch 'bugfix/spi_bus_unify_defualt_mosi_level_v5.1' into 'release/v5.1'
...
spi: unify default mosi level on all targets (v5.1)
See merge request espressif/esp-idf!25014
2023-08-17 10:13:05 +08:00
morris
c113507ad7
feat(gptimer): add gptimer linker.lf to control the placement of driver and hal
...
since the linker placement of the hal functions are controlled by the Kconfig in the driver component,
we should create the linker.lf in the driver component, not in the hal component.
2023-08-14 02:31:16 +00:00
wanlei
bb845e1841
cache: refactor cache_utils into cache_hal instade
2023-07-31 14:52:03 +08:00
wanlei
7a30edc412
fix(all): unify default mosi level to low on all targets
2023-07-26 20:34:25 +08:00
Armando
d21e332281
fix(adc): fixed esp32, esp32s2,esp32s3 adc oneshot mode clk div issue
2023-07-12 17:10:58 +08:00
Cao Sen Miao
f44e8a8a8f
brownout: Disable the hardware BOD when BOD interrupt is enabled
2023-07-11 14:32:40 +08:00
Cao Sen Miao
e493a99da2
temperature_sensor: Apply new-shared interface in temperature sensor driver
2023-07-10 11:16:09 +08:00
morris
0e4c071519
Merge branch 'bugfix/fix_i2s_ll_cpp_compilation_failure_v5.1' into 'release/v5.1'
...
i2s: fixed i2s_ll compiling failure under C++ environment (v5.1)
See merge request espressif/esp-idf!24401
2023-07-04 11:03:35 +08:00
laokaiyao
13e74d5573
i2s: fixed i2s_ll compiling failure under C++ evironment
...
Closes: https://github.com/espressif/esp-idf/issues/11625
2023-06-26 15:42:36 +08:00
morris
f9cf8db97e
drivers: fix issue reported by coverity
2023-06-07 11:42:11 +08:00
wuzhenghui
ed076c2bc8
bugfix: move adc_oneshot_power_acquire/release to adc_oneshot_read
...
Closes https://github.com/espressif/esp-idf/issues/10595
Closes https://github.com/espressif/esp-idf/issues/11386
2023-05-18 20:08:47 +08:00
morris
f79088f115
Merge branch 'bugfix/add_len_check_per_spi_master_transaction_v5.1' into 'release/v5.1'
...
spi master: added transaction length check to refuse longer than hardware supported length (v5.1)
See merge request espressif/esp-idf!23747
2023-05-18 16:47:18 +08:00
morris
0814386710
Merge branch 'refactor/driver_ut_to_test_app_v5.1' into 'release/v5.1'
...
CI: Move all UT in driver to test_app(backport v5.1)
See merge request espressif/esp-idf!23708
2023-05-18 16:18:26 +08:00
Armando
4943844764
spi: added transaction length check to refuse longer than hardware supported length
2023-05-17 09:03:26 +00:00
Cao Sen Miao
df7a27e36d
CI: Move all UT in driver to test_app
2023-05-16 16:42:28 +08:00
morris
aed737b351
Merge branch 'feature/efuse_settings_v5.1' into 'release/v5.1'
...
hal: Explicit setting of efuse time settings (v5.1)
See merge request espressif/esp-idf!23725
2023-05-15 19:16:30 +08:00
morris
78d88afbef
Merge branch 'bugfix/i2c_timing_wrong_v5.1' into 'release/v5.1'
...
i2c: fix a bug in sda sample timing (backport v5.1)
See merge request espressif/esp-idf!23379
2023-05-15 10:47:35 +08:00
KonstantinKondrashov
2165ff386e
hal: Explicit setting of efuse time settings
...
EFUSE_PWR_ON_NUM in C3 has default value = 0x2880, now = 0x3000
2023-05-12 21:42:38 +08:00
morris
d12ad17373
rmt: check filter and idle threashold
...
Closes https://github.com/espressif/esp-idf/issues/11262
2023-05-05 19:07:59 +08:00
Omar Chebib
6b5b7f09f9
i2c: fix a bug in sda sample timing
...
* Closes https://github.com/espressif/esp-idf/issues/9777
This bug prevented SCL line to work properly after a NACK was received in master mode.
2023-05-04 12:14:43 +08:00
Song Ruo Jing
44915e4251
Merge branch 'bugfix/ledc_channel_update_regression' into 'master'
...
ledc: Fix two bugs inside LEDC driver
See merge request espressif/esp-idf!23064
2023-04-06 20:52:23 +08:00
Song Ruo Jing
5070e51dde
ledc: Fix two bugs inside LEDC driver
...
1. Regression introduced when refactoring on clock sources selection (0d07f859
).
If channel configuration is called before timer configuration on C6, PWM signal may not be able to output.
2. Missing the improper fade parameter fix inside ledc_set_duty_and_update() function.
2023-04-06 12:37:33 +08:00
morris
1429913042
gdma: support override default channel priority
2023-04-06 10:49:32 +08:00
KonstantinKondrashov
5b00d1f396
efuse: Update efuses for esp32 esp32c2 esp32c3 esp32s2 esp32s3
2023-04-04 22:32:32 +08:00
Armando
6d4c0bb3aa
mspi: support 120M DDR flash and psram on S3 (experimental)
2023-04-03 10:30:50 +08:00
KonstantinKondrashov
975c138fad
esp_system: Do not rely on bootloader cache settings, do cache settings unconditionally at startup app
...
It makes multicore app runnable by unicore bootloader
Closes https://github.com/espressif/esp-idf/issues/10714
2023-03-28 23:17:16 +08:00