esp-idf/components/soc/esp32/include/soc/soc_caps.h

/*
 * SPDX-FileCopyrightText: 2020-2022 Espressif Systems (Shanghai) CO LTD
 *
 * SPDX-License-Identifier: Apache-2.0
 */

/*
 * Soc capabilities file, describing the following chip attributes:
 * - Peripheral or feature supported or not
 * - Number of resources (peripheral, channel, etc.)
 * - Maximum / Minimum value of HW, including: buffer/fifo size, length of transaction, frequency
 *   supported, etc.
 *
 * For boolean definitions:
 * - if true: `#define MODULE_[SUBMODULE_]SUPPORT_FEATURE 1`.
 *   (`#define` blank string causes error when checking by `#if x`)
 * - if false: not define anything at all.
 *   (`#ifdef x` is true even when `#define 0` is defined before.)
 *
 * The code depending on this file uses these boolean definitions as `#if x` or `#if !x`.
 * (`#ifdef/ifndef x` is not compatible with `#define x 0`. Though we don't suggest to use `#define
 * x 0`, it's still a risk.)
 *
 * ECO & exceptions:
 * For ECO-ed booleans, `#define x "Not determined"` for them. This will cause error when used by
 * `#if x` and `#if !x`, making these missing definitions more obvious.
 *
 * These defines are parsed and imported as kconfig variables via the script
 * `tools/gen_soc_caps_kconfig/gen_soc_caps_kconfig.py`
 *
 * If this file is changed the script will automatically run the script
 * and generate the kconfig variables as part of the pre-commit hooks.
 *
 * It can also be ran manually with `./tools/gen_soc_caps_kconfig/gen_soc_caps_kconfig.py 'components/soc/esp32/include/soc/'`
 *
 * For more information see `tools/gen_soc_caps_kconfig/README.md`
 */

#pragma once

#ifdef __has_include
#  if __has_include("sdkconfig.h")
#    include "sdkconfig.h"
#    define SOC_CAPS_ECO_VER    CONFIG_ESP32_REV_MIN
#  endif
#endif

#if __DOXYGEN__ && !defined(SOC_CAPS_ECO_VER)
#define SOC_CAPS_ECO_VER    SOC_CAPS_ECO_VER_MAX
#endif

#ifndef SOC_CAPS_ECO_VER
#warning ECO version not determined. Some ECO related caps will not be available.
#warning Define SOC_CAPS_ECO_VER before including this header.

// Define warning strings here for ECO-ed features to show error when they are used without being
// defined correctly
#define SOC_BROWNOUT_RESET_SUPPORTED    "Not determined"
#define SOC_TWAI_BRP_DIV_SUPPORTED      "Not determined"
#define SOC_DPORT_WORKAROUND            "Not determined"
#endif

/*-------------------------- COMMON CAPS ---------------------------------------*/
#define SOC_CAPS_ECO_VER_MAX        3

#define SOC_ADC_SUPPORTED           1
#define SOC_DAC_SUPPORTED           1
#define SOC_MCPWM_SUPPORTED         1
#define SOC_SDMMC_HOST_SUPPORTED    1
#define SOC_BT_SUPPORTED            1
#define SOC_PCNT_SUPPORTED          1
#define SOC_WIFI_SUPPORTED          1
#define SOC_SDIO_SLAVE_SUPPORTED    1
#define SOC_TWAI_SUPPORTED          1
#define SOC_EMAC_SUPPORTED          1
#define SOC_ULP_SUPPORTED           1
#define SOC_CCOMP_TIMER_SUPPORTED   1
#define SOC_RTC_FAST_MEM_SUPPORTED  1
#define SOC_RTC_SLOW_MEM_SUPPORTED  1
#define SOC_RTC_MEM_SUPPORTED       1
#define SOC_I2S_SUPPORTED           1
#define SOC_RMT_SUPPORTED           1
#define SOC_SDM_SUPPORTED           1
#define SOC_LEDC_SUPPORTED          1
#define SOC_I2C_SUPPORTED           1
#define SOC_SUPPORT_COEXISTENCE     1
#define SOC_AES_SUPPORTED           1
#define SOC_MPI_SUPPORTED           1
#define SOC_SHA_SUPPORTED           1
#define SOC_FLASH_ENC_SUPPORTED     1
#define SOC_SECURE_BOOT_SUPPORTED   1
#define SOC_TOUCH_SENSOR_SUPPORTED  1

#if SOC_CAPS_ECO_VER < 2
#define SOC_DPORT_WORKAROUND                   1
#endif // SOC_CAPS_ECO_VER < 2
#define SOC_DPORT_WORKAROUND_DIS_INTERRUPT_LVL (5U)

/*-------------------------- XTAL CAPS ---------------------------------------*/
#define SOC_XTAL_SUPPORT_26M            1
#define SOC_XTAL_SUPPORT_40M            1
#define SOC_XTAL_SUPPORT_AUTO_DETECT    1

/*-------------------------- ADC CAPS ----------------------------------------*/
/*!< SAR ADC Module*/
#define SOC_ADC_RTC_CTRL_SUPPORTED              1
#define SOC_ADC_DIG_CTRL_SUPPORTED              1
#define SOC_ADC_DMA_SUPPORTED                   1
#define SOC_ADC_PERIPH_NUM                      (2)
#define SOC_ADC_CHANNEL_NUM(PERIPH_NUM)         ((PERIPH_NUM==0)? 8: 10)
#define SOC_ADC_MAX_CHANNEL_NUM                 (10)
#define SOC_ADC_ATTEN_NUM                       (4)

/*!< Digital */
#define SOC_ADC_DIGI_CONTROLLER_NUM             (2)
#define SOC_ADC_PATT_LEN_MAX                    (16) //Two pattern table, each contains 16 items. Each item takes 1 byte. But only support ADC1 using DMA mode
#define SOC_ADC_DIGI_MIN_BITWIDTH               (9)
#define SOC_ADC_DIGI_MAX_BITWIDTH               (12)
#define SOC_ADC_DIGI_RESULT_BYTES               (2)
#define SOC_ADC_DIGI_DATA_BYTES_PER_CONV        (4)
#define SOC_ADC_SAMPLE_FREQ_THRES_HIGH          (2*1000*1000)
#define SOC_ADC_SAMPLE_FREQ_THRES_LOW           (20*1000)

/*!< RTC */
#define SOC_ADC_RTC_MIN_BITWIDTH                (9)
#define SOC_ADC_RTC_MAX_BITWIDTH                (12)
#define SOC_RTC_SLOW_CLOCK_SUPPORT_8MD256       (1)

/*-------------------------- BROWNOUT CAPS -----------------------------------*/
#if SOC_CAPS_ECO_VER >= 1
#define SOC_BROWNOUT_RESET_SUPPORTED 1
#endif


/*-------------------------- CACHE/MMU CAPS ----------------------------------*/
#define SOC_SHARED_IDCACHE_SUPPORTED            1   //Shared Cache for both instructions and data
#define SOC_MMU_LINEAR_ADDRESS_REGION_NUM       5


/*-------------------------- CPU CAPS ----------------------------------------*/
#define SOC_CPU_CORES_NUM               2
#define SOC_CPU_INTR_NUM                32
#define SOC_CPU_HAS_FPU                 1

#define SOC_CPU_BREAKPOINTS_NUM         2
#define SOC_CPU_WATCHPOINTS_NUM         2
#define SOC_CPU_WATCHPOINT_SIZE         64 // bytes

/*-------------------------- DAC CAPS ----------------------------------------*/
#define SOC_DAC_PERIPH_NUM      2
#define SOC_DAC_RESOLUTION      8 // DAC resolution ratio 8 bit

/*-------------------------- GPIO CAPS ---------------------------------------*/
// ESP32 has 1 GPIO peripheral
#define SOC_GPIO_PORT                   (1U)
#define SOC_GPIO_PIN_COUNT              40

// SOC_GPIO_SUPPORT_RTC_INDEPENDENT not defined. On ESP32 those PADs which have RTC functions must
// set pullup/down/capability via RTC register. On ESP32-S2, Digital IOs have their own registers to
// control pullup/down/capability, independent with RTC registers.

// 0~39 except from 24, 28~31 are valid
#define SOC_GPIO_VALID_GPIO_MASK        (0xFFFFFFFFFFULL & ~(0ULL | BIT24 | BIT28 | BIT29 | BIT30 | BIT31))
// GPIO >= 34 are input only
#define SOC_GPIO_VALID_OUTPUT_GPIO_MASK (SOC_GPIO_VALID_GPIO_MASK & ~(0ULL | BIT34 | BIT35 | BIT36 | BIT37 | BIT38 | BIT39))

// Support to configure slept status
#define SOC_GPIO_SUPPORT_SLP_SWITCH  (1)

/*-------------------------- I2C CAPS ----------------------------------------*/
// ESP32 has 2 I2C
#define SOC_I2C_NUM             (2)

#define SOC_I2C_FIFO_LEN        (32) /*!< I2C hardware FIFO depth */
#define SOC_I2C_SUPPORT_SLAVE   (1)

#define SOC_I2C_SUPPORT_APB     (1)

/*-------------------------- APLL CAPS ----------------------------------------*/
#define SOC_CLK_APLL_SUPPORTED       (1)
// apll_multiplier_out = xtal_freq * (4 + sdm2 + sdm1/256 + sdm0/65536)
#define SOC_APLL_MULTIPLIER_OUT_MIN_HZ (350000000) // 350 MHz
#define SOC_APLL_MULTIPLIER_OUT_MAX_HZ (500000000) // 500 MHz
#define SOC_APLL_MIN_HZ    (5303031)   // 5.303031 MHz, refer to 'periph_rtc_apll_freq_set' for the calculation
#define SOC_APLL_MAX_HZ    (125000000) // 125MHz, refer to 'periph_rtc_apll_freq_set' for the calculation

/*-------------------------- I2S CAPS ----------------------------------------*/
// ESP32 has 2 I2S
#define SOC_I2S_NUM                 (2U)
#define SOC_I2S_HW_VERSION_1        (1)
#define SOC_I2S_SUPPORTS_APLL       (1)
#define SOC_I2S_SUPPORTS_PDM        (1)
#define SOC_I2S_SUPPORTS_PDM_TX     (1)
#define SOC_I2S_SUPPORTS_PDM_RX     (1)
#define SOC_I2S_SUPPORTS_ADC_DAC    (1)
#define SOC_I2S_SUPPORTS_ADC        (1)
#define SOC_I2S_SUPPORTS_DAC        (1)
#define SOC_I2S_SUPPORTS_LCD_CAMERA (1)

#define SOC_I2S_TRANS_SIZE_ALIGN_WORD (1) // I2S DMA transfer size must be aligned to word
#define SOC_I2S_LCD_I80_VARIANT       (1) // I2S has a special LCD mode that can generate Intel 8080 TX timing

/*-------------------------- LCD CAPS ----------------------------------------*/
/* Notes: On esp32, LCD intel 8080 timing is generated by I2S peripheral */
#define SOC_LCD_I80_SUPPORTED      (1)  /*!< Intel 8080 LCD is supported */
#define SOC_LCD_I80_BUSES          (2)  /*!< Both I2S0/1 have LCD mode */
#define SOC_LCD_I80_BUS_WIDTH      (24) /*!< Intel 8080 bus width */

/*-------------------------- LEDC CAPS ---------------------------------------*/
#define SOC_LEDC_HAS_TIMER_SPECIFIC_MUX  (1)
#define SOC_LEDC_SUPPORT_APB_CLOCK       (1)
#define SOC_LEDC_SUPPORT_REF_TICK        (1)
#define SOC_LEDC_SUPPORT_HS_MODE         (1)
#define SOC_LEDC_CHANNEL_NUM             (8)
#define SOC_LEDC_TIMER_BIT_WIDE_NUM      (20)

/*-------------------------- MCPWM CAPS --------------------------------------*/
#define SOC_MCPWM_GROUPS                     (2)    ///< 2 MCPWM groups on the chip (i.e., the number of independent MCPWM peripherals)
#define SOC_MCPWM_TIMERS_PER_GROUP           (3)    ///< The number of timers that each group has
#define SOC_MCPWM_OPERATORS_PER_GROUP        (3)    ///< The number of operators that each group has
#define SOC_MCPWM_COMPARATORS_PER_OPERATOR   (2)    ///< The number of comparators that each operator has
#define SOC_MCPWM_GENERATORS_PER_OPERATOR    (2)    ///< The number of generators that each operator has
#define SOC_MCPWM_TRIGGERS_PER_OPERATOR      (2)    ///< The number of triggers that each operator has
#define SOC_MCPWM_GPIO_FAULTS_PER_GROUP      (3)    ///< The number of GPIO fault signals that each group has
#define SOC_MCPWM_CAPTURE_TIMERS_PER_GROUP   (1)    ///< The number of capture timers that each group has
#define SOC_MCPWM_CAPTURE_CHANNELS_PER_TIMER (3)    ///< The number of capture channels that each capture timer has
#define SOC_MCPWM_GPIO_SYNCHROS_PER_GROUP    (3)    ///< The number of GPIO synchros that each group has

/*-------------------------- MPU CAPS ----------------------------------------*/
//TODO: correct the caller and remove unsupported lines
#define SOC_MPU_CONFIGURABLE_REGIONS_SUPPORTED    0
#define SOC_MPU_MIN_REGION_SIZE                   0x20000000U
#define SOC_MPU_REGIONS_MAX_NUM                   8
#define SOC_MPU_REGION_RO_SUPPORTED               0
#define SOC_MPU_REGION_WO_SUPPORTED               0

/*-------------------------- PCNT CAPS ---------------------------------------*/
#define SOC_PCNT_GROUPS                  (1U)
#define SOC_PCNT_UNITS_PER_GROUP         (8)
#define SOC_PCNT_CHANNELS_PER_UNIT       (2)
#define SOC_PCNT_THRES_POINT_PER_UNIT    (2)

/*-------------------------- RMT CAPS ----------------------------------------*/
#define SOC_RMT_GROUPS                  1U /*!< One RMT group */
#define SOC_RMT_TX_CANDIDATES_PER_GROUP 8  /*!< Number of channels that capable of Transmit in each group */
#define SOC_RMT_RX_CANDIDATES_PER_GROUP 8  /*!< Number of channels that capable of Receive in each group */
#define SOC_RMT_CHANNELS_PER_GROUP      8  /*!< Total 8 channels */
#define SOC_RMT_MEM_WORDS_PER_CHANNEL   64 /*!< Each channel owns 64 words memory */
#define SOC_RMT_SUPPORT_REF_TICK        1  /*!< Support set REF_TICK as the RMT clock source */
#define SOC_RMT_SUPPORT_APB             1  /*!< Support set APB as the RMT clock source */
#define SOC_RMT_CHANNEL_CLK_INDEPENDENT 1  /*!< Can select different source clock for each channel */

/*-------------------------- RTCIO CAPS --------------------------------------*/
#define SOC_RTCIO_PIN_COUNT 18
#define SOC_RTCIO_INPUT_OUTPUT_SUPPORTED 1
#define SOC_RTCIO_HOLD_SUPPORTED 1
#define SOC_RTCIO_WAKE_SUPPORTED 1

/*-------------------------- Sigma Delta Modulator CAPS -----------------*/
#define SOC_SDM_GROUPS             1U
#define SOC_SDM_CHANNELS_PER_GROUP 8

/*-------------------------- SPI CAPS ----------------------------------------*/
#define SOC_SPI_HD_BOTH_INOUT_SUPPORTED 1  //Support enabling MOSI and MISO phases together under Halfduplex mode
#define SOC_SPI_AS_CS_SUPPORTED         1  //Support to toggle the CS while the clock toggles
#define SOC_SPI_PERIPH_NUM              3
#define SOC_SPI_DMA_CHAN_NUM            2

#define SOC_SPI_PERIPH_CS_NUM(i)        3
#define SOC_SPI_MAX_CS_NUM              3

#define SOC_SPI_MAXIMUM_BUFFER_SIZE     64
#define SOC_SPI_MAX_PRE_DIVIDER         8192

// Although ESP32 doesn't has memspi, but keep consistent with following chips.(This means SPI0/1)
#define SOC_MEMSPI_SRC_FREQ_80M_SUPPORTED         1
#define SOC_MEMSPI_SRC_FREQ_40M_SUPPORTED         1
#define SOC_MEMSPI_SRC_FREQ_26M_SUPPORTED         1
#define SOC_MEMSPI_SRC_FREQ_20M_SUPPORTED         1


// Peripheral supports DIO, DOUT, QIO, or QOUT
#define SOC_SPI_PERIPH_SUPPORT_MULTILINE_MODE(spi_host)         ({(void)spi_host; 1;})

/*-------------------------- TIMER GROUP CAPS --------------------------------*/
#define SOC_TIMER_GROUPS                  (2)
#define SOC_TIMER_GROUP_TIMERS_PER_GROUP  (2)
#define SOC_TIMER_GROUP_COUNTER_BIT_WIDTH (64)
#define SOC_TIMER_GROUP_TOTAL_TIMERS      (4)
#define SOC_TIMER_GROUP_SUPPORT_APB       (1)

/*-------------------------- TOUCH SENSOR CAPS -------------------------------*/
#define SOC_TOUCH_VERSION_1                 (1)     /*!<Hardware version of touch sensor */
#define SOC_TOUCH_SENSOR_NUM                (10)

#define SOC_TOUCH_PAD_MEASURE_WAIT_MAX      (0xFF)  /*!<The timer frequency is 8Mhz, the max value is 0xff */
#define SOC_TOUCH_PAD_THRESHOLD_MAX         (0)     /*!<If set touch threshold max value, The touch sensor can't be in touched status */

/*-------------------------- TWAI CAPS ---------------------------------------*/
#define SOC_TWAI_BRP_MIN                        2
#if SOC_CAPS_ECO_VER >= 2
#  define SOC_TWAI_BRP_MAX              256
#  define SOC_TWAI_BRP_DIV_SUPPORTED    1
#  define SOC_TWAI_BRP_DIV_THRESH       128
#else
#  define SOC_TWAI_BRP_MAX              128
#endif
#define SOC_TWAI_SUPPORT_MULTI_ADDRESS_LAYOUT   1

/*-------------------------- UART CAPS ---------------------------------------*/
// ESP32 have 3 UART.
#define SOC_UART_NUM                (3)
#define SOC_UART_SUPPORT_APB_CLK    (1)         /*!< Support APB as the clock source */
#define SOC_UART_SUPPORT_REF_TICK   (1)         /*!< Support REF_TICK as the clock source */
#define SOC_UART_FIFO_LEN           (128)       /*!< The UART hardware FIFO length */
#define SOC_UART_BITRATE_MAX        (5000000)   /*!< Max bit rate supported by UART */


/*-------------------------- SPIRAM CAPS -------------------------------------*/
#define SOC_SPIRAM_SUPPORTED    1

/*-------------------------- SPI MEM CAPS ---------------------------------------*/
#define SOC_SPI_MEM_SUPPORT_CONFIG_GPIO_BY_EFUSE         (1)

/*--------------------------- SHA CAPS ---------------------------------------*/
/* ESP32 style SHA engine, where multiple states can be stored in parallel */
#define SOC_SHA_SUPPORT_PARALLEL_ENG    (1)

/* Supported HW algorithms */
#define SOC_SHA_SUPPORT_SHA1            (1)
#define SOC_SHA_SUPPORT_SHA256          (1)
#define SOC_SHA_SUPPORT_SHA384          (1)
#define SOC_SHA_SUPPORT_SHA512          (1)


/*--------------------------- RSA CAPS ---------------------------------------*/
#define SOC_RSA_MAX_BIT_LEN    (4096)


/*-------------------------- AES CAPS -----------------------------------------*/
#define SOC_AES_SUPPORT_AES_128 (1)
#define SOC_AES_SUPPORT_AES_192 (1)
#define SOC_AES_SUPPORT_AES_256 (1)

/*-------------------------- Secure Boot CAPS----------------------------*/
/*
 * ESP32 ECO3 revision also supports `SOC_SECURE_BOOT_V2_RSA` but for that we will need selected ECO
 * version from `Kconfig`, which is not possible while generating `Kconfig.soc_caps.in` from this header.
 * Hence, for now we are handling this special capability in bootloader "security" configuration itself.
 */
#define SOC_SECURE_BOOT_V1                  1
#define SOC_EFUSE_SECURE_BOOT_KEY_DIGESTS   1

/*-------------------------- Flash Encryption CAPS----------------------------*/
#define SOC_FLASH_ENCRYPTED_XTS_AES_BLOCK_MAX   (32)

/*--------------- PHY REGISTER AND MEMORY SIZE CAPS --------------------------*/
#define SOC_PHY_DIG_REGS_MEM_SIZE       (21*4)

/*-------------------------- Power Management CAPS ---------------------------*/
#define SOC_PM_SUPPORT_EXT_WAKEUP                 (1)
#define SOC_PM_SUPPORT_TOUCH_SENSOR_WAKEUP        (1)     /*!<Supports waking up from touch pad trigger */
#define SOC_PM_SUPPORT_RTC_PERIPH_PD              (1)
#define SOC_PM_SUPPORT_RTC_FAST_MEM_PD            (1)
#define SOC_PM_SUPPORT_RTC_SLOW_MEM_PD            (1)

/* ---------------------------- Compatibility ------------------------------- */
#define SOC_CAN_SUPPORTED                   SOC_TWAI_SUPPORTED
#define CAN_BRP_MIN                         SOC_TWAI_BRP_MIN
#define CAN_BRP_MAX                         SOC_TWAI_BRP_MAX
#define CAN_SUPPORT_MULTI_ADDRESS_LAYOUT    SOC_TWAI_SUPPORT_MULTI_ADDRESS_LAYOUT
#if SOC_CAPS_ECO_VER >= 2
#  define CAN_BRP_DIV_SUPPORTED             SOC_TWAI_BRP_DIV_SUPPORTED
#  define CAN_BRP_DIV_THRESH                SOC_TWAI_BRP_DIV_THRESH
#endif

/*-------------------------- SDMMC CAPS -----------------------------------------*/

/* On ESP32, clock/cmd/data pins use IO MUX.
 * Card detect, write protect, interrupt use GPIO Matrix on all chips.
 */
#define SOC_SDMMC_USE_IOMUX  1
#define SOC_SDMMC_NUM_SLOTS  2

/*-------------------------- WI-FI HARDWARE CAPS -------------------------------*/
#define SOC_WIFI_HW_TSF                 (0)    /*!< Hardware TSF is not supported */
#define SOC_WIFI_FTM_SUPPORT            (0)    /*!< FTM is not supported */
#define SOC_WIFI_GCMP_SUPPORT           (0)    /*!< GCMP is not supported(GCMP128 and GCMP256) */
#define SOC_WIFI_WAPI_SUPPORT           (1)    /*!< Support WAPI */
#define SOC_WIFI_CSI_SUPPORT            (1)    /*!< Support CSI */
#define SOC_WIFI_MESH_SUPPORT           (1)    /*!< Support WIFI MESH */

/*---------------------------------- Bluetooth CAPS ----------------------------------*/
#define SOC_BLE_SUPPORTED               (1)    /*!< Support Bluetooth Low Energy hardware */
#define SOC_BLE_MESH_SUPPORTED          (1)    /*!< Support BLE MESH */
#define SOC_BT_CLASSIC_SUPPORTED        (1)    /*!< Support Bluetooth Classic hardware */