| .. |
|
adc_hal_conf.h
|
adc: unify adc_ll_num_t and adc_unit_t
|
2022-03-18 11:36:50 +08:00 |
|
adc_ll.h
|
adc: create common adc hal layer
|
2022-05-07 19:20:44 +08:00 |
|
aes_ll.h
|
aes: fix potential unaligned access of buffers
|
2021-08-25 10:48:26 +08:00 |
|
cache_ll.h
|
mmu: improve vaddr range check
|
2022-04-27 11:35:07 +08:00 |
|
clk_gate_ll.h
|
adc: fix adc digital not reset issue
|
2022-03-04 03:49:33 +00:00 |
|
cpu_ll.h
|
HAL: place cpu_ll_get_cycle_count in IRAM
|
2022-05-26 14:42:41 +08:00 |
|
ds_ll.h
|
Digital Signature support for S3
|
2021-09-02 11:59:24 +05:30 |
|
efuse_hal.h
|
efuse: Validates data after burning and re-burnes it if necessary
|
2022-04-27 01:10:41 +08:00 |
|
efuse_ll.h
|
soc: Adds efuse hal
|
2022-02-24 22:20:09 +08:00 |
|
gdma_ll.h
|
lcd: delay 1us between DMA start and LCD start
|
2022-03-14 14:00:40 +08:00 |
|
gpio_ll.h
|
esp32h2: support GPIO peripheral, IO_MUX, GPIO matrix.
|
2022-03-04 11:25:05 +08:00 |
|
gpspi_flash_ll.h
|
spi_flash: refactor the spi_flash clock configuration, and add support for esp32c2
|
2022-04-26 15:22:37 +08:00 |
|
hmac_hal.h
|
[esp_hw_support]: HMAC upstream support for S3
|
2021-08-13 12:01:06 +08:00 |
|
hmac_ll.h
|
[esp_hw_support]: HMAC upstream support for S3
|
2021-08-13 12:01:06 +08:00 |
|
i2c_ll.h
|
I2C: Fix SCL period timings on ESP targets
|
2022-05-18 05:36:08 +00:00 |
|
i2s_ll.h
|
i2s: fix only right case
|
2022-04-23 07:38:45 +00:00 |
|
interrupt_controller_ll.h
|
[hal]: cleaned up interrupt mask functions
|
2021-04-06 11:54:13 +08:00 |
|
lcd_ll.h
|
lcd: support I2S1 LCD mode on esp32
|
2022-03-14 13:55:01 +08:00 |
|
ledc_ll.h
|
ledc: Provide support for esp32c2 and esp32h2
|
2022-04-14 08:15:14 +00:00 |
|
mcpwm_ll.h
|
mcpwm: fix implicit conversion in LL function
|
2021-12-14 17:26:55 +08:00 |
|
memprot_ll.h
|
hal: added HAL_ASSERT
|
2021-06-22 11:28:01 +08:00 |
|
mmu_ll.h
|
flash mmap: abstract R/W MMU table instead of reg access
|
2022-05-20 16:46:27 +08:00 |
|
mpu_ll.h
|
hal: mpu: fix signed overflow error
|
2021-04-22 23:33:47 +02:00 |
|
mwdt_ll.h
|
gptimer: clean up hal and ll for driver-ng
|
2021-10-20 18:40:08 +08:00 |
|
pcnt_ll.h
|
pulse_cnt: new driver for PCNT peripheral
|
2022-03-03 22:38:32 +08:00 |
|
rmt_ll.h
|
rmt: add more clock source caps
|
2022-04-21 13:59:47 +00:00 |
|
rtc_cntl_ll.h
|
remove wrong function rtc_cntl_ll_ulp_wakeup_enable for esp32s2 and esp32s3
|
2022-05-12 21:51:21 +08:00 |
|
rtc_io_ll.h
|
build-system: include soc_caps defines into kconfig
|
2021-12-06 12:37:07 +08:00 |
|
rwdt_ll.h
|
soc/ll: workaround compiler bug that generate 8/16 bits inst instead of 32 bits one
|
2021-08-30 13:50:58 +08:00 |
|
sha_ll.h
|
global: fix sign-compare warnings
|
2021-01-12 14:05:08 +08:00 |
|
sigmadelta_ll.h
|
soc/ll: workaround compiler bug that generate 8/16 bits inst instead of 32 bits one
|
2021-08-30 13:50:58 +08:00 |
|
soc_ll.h
|
Whitespace: Automated whitespace fixes (large commit)
|
2020-11-11 07:36:35 +00:00 |
|
spi_flash_encrypted_ll.h
|
hal: added HAL_ASSERT
|
2021-06-22 11:28:01 +08:00 |
|
spi_flash_ll.h
|
spi_flash: refactor the spi_flash clock configuration, and add support for esp32c2
|
2022-04-26 15:22:37 +08:00 |
|
spi_ll.h
|
hal: Fix max value for clkdiv_pre in ESP32-S3 SPI master clock config
|
2022-05-23 10:13:07 -03:00 |
|
spimem_flash_ll.h
|
spi_flash: refactor the spi_flash clock configuration, and add support for esp32c2
|
2022-04-26 15:22:37 +08:00 |
|
systimer_ll.h
|
freertos(esp32s3): SysTick uses systimer
|
2021-08-04 20:33:44 +08:00 |
|
temperature_sensor_ll.h
|
hw_support: fixed regi2c not protected by lock on ESP32S2
|
2022-03-13 00:24:08 +08:00 |
|
timer_ll.h
|
timer: save alarm value in driver layer
|
2021-12-23 11:39:32 +08:00 |
|
touch_sensor_hal.h
|
touch sensor: update copyright notice
|
2021-10-08 11:45:57 +08:00 |
|
touch_sensor_ll.h
|
touch sensor: update copyright notice
|
2021-10-08 11:45:57 +08:00 |
|
trace_ll.h
|
trax: Adds ESP32-S3 support
|
2021-10-22 23:36:28 +03:00 |
|
twai_ll.h
|
twai: Fix twai_ll_parse_frame_buffer() typo
|
2022-04-22 15:25:39 +08:00 |
|
uart_ll.h
|
uart: fixed reset logic on ESP32-S3
|
2022-03-01 18:21:31 +08:00 |
|
uhci_ll.h
|
examples: added support of ESP32-S3 chip in controller_hci_uart example
|
2021-08-26 14:24:32 +08:00 |
|
usb_ll.h
|
usb: update LL to support PHY selection
|
2021-07-22 10:40:08 +08:00 |
|
usb_phy_ll.h
|
usb: Add usb_phy driver to support operations on USB PHY
|
2021-09-13 12:39:56 +08:00 |
|
usb_serial_jtag_ll.h
|
usb_serial_jtag: add initial support for S3 (including flashing, monitoring, writing, and reading) but console is not avaliable now
|
2021-06-18 12:42:41 +08:00 |
|
xt_wdt_ll.h
|
WDT: Add support for XTAL32K Watchdog timer
|
2021-09-02 09:09:00 +08:00 |
f3922f1b7f