| .. |
|
adc_channel.h
|
adc: make adc_channel.h macros work with ng driver
|
2023-01-09 14:25:24 +08:00 |
|
apb_saradc_reg.h
|
esp32c2: Add support for RNG
|
2022-06-02 11:36:23 +08:00 |
|
apb_saradc_struct.h
|
temperature_sensor: Add temperature sensor support for ESP32-C2
|
2022-06-23 15:36:43 +08:00 |
|
assist_debug_reg.h
|
esp8684: rename target to esp32c2
|
2022-01-19 11:08:57 +08:00 |
|
bb_reg.h
|
esp8684: rename target to esp32c2
|
2022-01-19 11:08:57 +08:00 |
|
boot_mode.h
|
esp8684: rename target to esp32c2
|
2022-01-19 11:08:57 +08:00 |
|
clk_tree_defs.h
|
ledc: Add support for esp32h2; Refactor ledc driver clock source selection related code
|
2023-01-30 19:19:34 +08:00 |
|
clkout_channel.h
|
gpio: Add support for esp32c6
|
2022-10-18 12:38:36 +08:00 |
|
dport_access.h
|
dport: Move DPORT workaround to G0
|
2022-05-31 13:44:18 +08:00 |
|
dport_reg.h
|
dport: Move DPORT workaround to G0
|
2022-05-31 13:44:18 +08:00 |
|
ecc_mult_reg.h
|
esp32c2/hal: Added ECC HAL layer
|
2022-03-08 14:05:23 +00:00 |
|
efuse_defs.h
|
efuse: Update efuses for esp32 esp32c2 esp32c3 esp32s2 esp32s3
|
2023-04-04 22:32:32 +08:00 |
|
efuse_reg.h
|
efuse: Update efuses for esp32 esp32c2 esp32c3 esp32s2 esp32s3
|
2023-04-04 22:32:32 +08:00 |
|
efuse_struct.h
|
efuse: Update efuses for esp32 esp32c2 esp32c3 esp32s2 esp32s3
|
2023-04-04 22:32:32 +08:00 |
|
ext_mem_defs.h
|
g0: resolve MMU_PAGE_SIZE not defined in g0 build issue
|
2023-02-22 12:37:40 +08:00 |
|
extmem_reg.h
|
esp8684: rename target to esp32c2
|
2022-01-19 11:08:57 +08:00 |
|
fe_reg.h
|
esp8684: rename target to esp32c2
|
2022-01-19 11:08:57 +08:00 |
|
gdma_channel.h
|
gdma: correct the dma trigger of uart
|
2023-01-10 16:37:01 +08:00 |
|
gdma_reg.h
|
esp8684: rename target to esp32c2
|
2022-01-19 11:08:57 +08:00 |
|
gdma_struct.h
|
esp8684: rename target to esp32c2
|
2022-01-19 11:08:57 +08:00 |
|
gpio_pins.h
|
esp8684: rename target to esp32c2
|
2022-01-19 11:08:57 +08:00 |
|
gpio_reg.h
|
esp8684: rename target to esp32c2
|
2022-01-19 11:08:57 +08:00 |
|
gpio_sig_map.h
|
esp8684: rename target to esp32c2
|
2022-01-19 11:08:57 +08:00 |
|
gpio_struct.h
|
esp8684: rename target to esp32c2
|
2022-01-19 11:08:57 +08:00 |
|
hwcrypto_reg.h
|
hal(ecp32c2): Adds spi_flash_encrypted_ll
|
2022-05-31 11:12:21 +00:00 |
|
i2c_reg.h
|
esp8684: rename target to esp32c2
|
2022-01-19 11:08:57 +08:00 |
|
i2c_struct.h
|
i2c: support esp32h2
|
2022-02-23 15:19:37 +08:00 |
|
interrupt_core0_reg.h
|
esp8684: rename target to esp32c2
|
2022-01-19 11:08:57 +08:00 |
|
interrupt_reg.h
|
esp8684: rename target to esp32c2
|
2022-01-19 11:08:57 +08:00 |
|
io_mux_reg.h
|
gpio: support glitch filter
|
2022-12-09 11:33:42 +08:00 |
|
Kconfig.soc_caps.in
|
external coex: rename coex gpio struct field names
|
2023-07-13 10:37:53 +08:00 |
|
ledc_reg.h
|
ledc: Provide support for esp32c2 and esp32h2
|
2022-04-14 08:15:14 +00:00 |
|
ledc_struct.h
|
ledc: Provide support for esp32c2 and esp32h2
|
2022-04-14 08:15:14 +00:00 |
|
mmu.h
|
soc: remove unused MMU related macros
|
2022-05-20 16:46:28 +08:00 |
|
modem_clkrst_reg.h
|
Fix soc caps for BT
|
2022-06-03 21:45:40 +08:00 |
|
nrx_reg.h
|
esp8684: rename target to esp32c2
|
2022-01-19 11:08:57 +08:00 |
|
periph_defs.h
|
temperature_sensor: Add temperature sensor support for ESP32-C2
|
2022-06-23 15:36:43 +08:00 |
|
reg_base.h
|
soc: remove unused DR_REG_DPORT_END macro for c2/c3/s2/s3
|
2022-09-22 11:45:20 +08:00 |
|
regi2c_bbpll.h
|
Refactor: move regi2c_*.h header files from esp_hw_support to soc component
|
2022-06-30 09:40:44 +00:00 |
|
regi2c_bias.h
|
Refactor: move regi2c_*.h header files from esp_hw_support to soc component
|
2022-06-30 09:40:44 +00:00 |
|
regi2c_brownout.h
|
G0: RISC-V targets have now an independent G0 layer
|
2022-06-14 15:00:53 +08:00 |
|
regi2c_defs.h
|
1.add ldo parameters in efuse table; 2.set ldo dbias based on pvt-efuse; 3.add pll cali stop function; 4. add efuse_ocode
|
2022-08-05 14:24:51 +08:00 |
|
regi2c_dig_reg.h
|
Refactor: move regi2c_*.h header files from esp_hw_support to soc component
|
2022-06-30 09:40:44 +00:00 |
|
regi2c_lp_bias.h
|
Refactor: move regi2c_*.h header files from esp_hw_support to soc component
|
2022-06-30 09:40:44 +00:00 |
|
regi2c_saradc.h
|
G0: RISC-V targets have now an independent G0 layer
|
2022-06-14 15:00:53 +08:00 |
|
reset_reasons.h
|
esp_system: support esp32c2 reset reason
|
2022-02-15 13:50:22 +08:00 |
|
rtc_cntl_reg.h
|
bootloader: enable super WDT and BOD reset on C2
|
2023-04-24 11:32:23 +08:00 |
|
rtc_cntl_struct.h
|
soc: fix register header files not self-contain
|
2022-07-29 11:18:06 +08:00 |
|
rtc.h
|
fix chip broken bug when run in monitor mode of S2 and modify voltage param to fit all sleep mode of S2/C2/C3
|
2023-04-24 10:37:57 +08:00 |
|
sensitive_reg.h
|
esp8684: rename target to esp32c2
|
2022-01-19 11:08:57 +08:00 |
|
sensitive_struct.h
|
esp8684: rename target to esp32c2
|
2022-01-19 11:08:57 +08:00 |
|
soc_caps.h
|
fix(mbedtls): Fix the port for the mbedtls_internal_shaX_process API
|
2023-07-14 14:20:20 +05:30 |
|
soc_pins.h
|
esp8684: rename target to esp32c2
|
2022-01-19 11:08:57 +08:00 |
|
soc.h
|
Revert "fix(esp_pm): Constrains the minimum frequency of APB_MAX when the modem is working"
|
2023-07-25 13:51:37 +08:00 |
|
spi_mem_reg.h
|
esp8684: rename target to esp32c2
|
2022-01-19 11:08:57 +08:00 |
|
spi_mem_struct.h
|
C/Cxx: unify static assertions with the macro ESP_STATIC_ASSERT
|
2022-11-21 16:18:08 +08:00 |
|
spi_pins.h
|
esp8684: rename target to esp32c2
|
2022-01-19 11:08:57 +08:00 |
|
spi_reg.h
|
esp8684: rename target to esp32c2
|
2022-01-19 11:08:57 +08:00 |
|
spi_struct.h
|
esp8684: rename target to esp32c2
|
2022-01-19 11:08:57 +08:00 |
|
syscon_reg.h
|
Fix soc caps for BT
|
2022-06-03 21:45:40 +08:00 |
|
syscon_struct.h
|
soc: fix register header files not self-contain
|
2022-07-29 11:18:06 +08:00 |
|
system_reg.h
|
esp32c6: clean up existing soc files and header file inclusion in IDF to be compatible with the new chip
|
2022-09-01 12:28:06 +08:00 |
|
system_struct.h
|
esp8684: rename target to esp32c2
|
2022-01-19 11:08:57 +08:00 |
|
systimer_reg.h
|
esp8684: rename target to esp32c2
|
2022-01-19 11:08:57 +08:00 |
|
systimer_struct.h
|
systimer: refactor hal to accomodate more xtal choices
|
2022-07-25 16:08:52 +08:00 |
|
timer_group_reg.h
|
esp8684: rename target to esp32c2
|
2022-01-19 11:08:57 +08:00 |
|
timer_group_struct.h
|
WDT: implement interrupt wdt and task wdt for ESP32-C2
|
2022-09-15 14:37:59 +08:00 |
|
uart_channel.h
|
uart: Provide support for esp32c2 and esp32h2
|
2022-03-02 11:29:13 +08:00 |
|
uart_pins.h
|
esp8684: rename target to esp32c2
|
2022-01-19 11:08:57 +08:00 |
|
uart_reg.h
|
esp8684: rename target to esp32c2
|
2022-01-19 11:08:57 +08:00 |
|
uart_struct.h
|
driver: fix public header exceptions for driver
|
2022-07-22 00:12:36 +00:00 |
|
wdev_reg.h
|
esp8684: rename target to esp32c2
|
2022-01-19 11:08:57 +08:00 |
