| .. |
|
adc_ll.h
|
Merge branch 'bugfix/fix_adc_read_zero_h2_v5.1' into 'release/v5.1'
|
2023-11-21 11:08:57 +08:00 |
|
aes_ll.h
|
esp32h2: add support for AES peripheral
|
2023-01-30 10:09:14 +05:30 |
|
ana_cmpr_ll.h
|
ana_cmpr: add programming guide
|
2023-03-17 14:35:55 +08:00 |
|
apm_ll.h
|
apm: added support for APM on esp32h2
|
2023-02-14 10:43:49 +00:00 |
|
brownout_ll.h
|
fix(bod): Reset brownout in configuration to avoid RF cannot be enabled again
|
2023-12-07 10:33:58 +08:00 |
|
cache_ll.h
|
cache: refactor cache_utils into cache_hal instade
|
2023-07-31 14:52:03 +08:00 |
|
clk_gate_ll.h
|
fix(adc): fix adc continuous get less results beacuse do not reset apb clk
|
2023-12-06 10:19:45 +00:00 |
|
clk_tree_ll.h
|
support h2 eco2 fosc calibration for v5.1
|
2023-04-26 17:08:09 +08:00 |
|
dedic_gpio_cpu_ll.h
|
gpio: support glitch filter on esp32h2
|
2023-02-11 23:01:01 +08:00 |
|
ds_ll.h
|
esp32h2: add DS peripheral HAL
|
2023-02-13 10:26:37 +05:30 |
|
ecc_ll.h
|
esp32h2: Add support for ECC hardware accelerator
|
2023-03-13 16:39:46 +05:30 |
|
ecdsa_ll.h
|
fix(ecdsa): remove unused k_mode from the ECDSA HAL/LL API
|
2023-11-20 16:05:15 +05:30 |
|
efuse_hal.h
|
ESP32-H2: Last MR for g0 component support, (only hal left)
|
2022-12-05 17:32:21 +08:00 |
|
efuse_ll.h
|
hal: Explicit setting of efuse time settings
|
2023-05-12 21:42:38 +08:00 |
|
etm_ll.h
|
etm: add basic driver on esp32h2
|
2023-02-07 14:54:08 +00:00 |
|
gdma_ll.h
|
gdma: support override default channel priority
|
2023-04-06 10:49:32 +08:00 |
|
gpio_etm_ll.h
|
etm: add basic driver on esp32h2
|
2023-02-07 14:54:08 +00:00 |
|
gpio_glitch_filter_ll.h
|
filter: workaround a hw issue in the glitch filter
|
2023-03-29 13:28:07 +08:00 |
|
gpio_ll.h
|
feat(gpio): add a dump API to dump IO configurations
|
2023-11-03 16:21:31 +08:00 |
|
gpspi_flash_ll.h
|
ESP32-H2: Last MR for g0 component support, (only hal left)
|
2022-12-05 17:32:21 +08:00 |
|
hmac_ll.h
|
esp32h2: add HMAC peripheral HAL
|
2023-02-13 10:26:36 +05:30 |
|
i2c_ll.h
|
Merge branch 'refactor/driver_ut_to_test_app_v5.1' into 'release/v5.1'
|
2023-05-18 16:18:26 +08:00 |
|
i2s_ll.h
|
i2s: fixed i2s_ll compiling failure under C++ evironment
|
2023-06-26 15:42:36 +08:00 |
|
ieee802154_ll.h
|
IEEE802154: match C6 max txpower value with datasheet
|
2023-07-11 14:28:54 +08:00 |
|
ledc_ll.h
|
ledc: Support gamma curve fade feature on esp32c6 and esp32h2
|
2023-03-10 12:42:46 +08:00 |
|
lp_aon_hal.h
|
feat(pm/deepsleep): Support EXT1_WAKEUP_MODE_PER_PIN
|
2023-11-03 11:02:56 +08:00 |
|
lp_aon_ll.h
|
fix(pm/ext1): fix c6 h2 lp_aon_ll_ext1_set_wakeup_pins func
|
2023-12-07 03:52:22 +00:00 |
|
lp_clkrst_ll.h
|
modem_clock: implemented the modem clock hal/ll-layer (include modem syscon and lpcon) for esp32h2
|
2023-03-29 13:23:27 +08:00 |
|
lp_timer_ll.h
|
Power Management: support DFS and PMU feature for esp32h2
|
2023-07-11 12:02:39 +08:00 |
|
lpwdt_ll.h
|
feat(wdt): add LL functions for WDT on H2
|
2023-09-08 11:01:25 +08:00 |
|
mcpwm_ll.h
|
feature(MCPWM): Add MCPWM trigger driver and test
|
2023-11-15 05:57:37 +00:00 |
|
mmu_ll.h
|
fix(hal): Fix the external memory vaddr region validity check
|
2023-08-22 15:24:02 +05:30 |
|
modem_lpcon_ll.h
|
esp_hw_support: add modem module mac reset api
|
2023-06-28 14:01:29 +08:00 |
|
modem_syscon_ll.h
|
esp_hw_support: add modem module mac reset api
|
2023-06-28 14:01:29 +08:00 |
|
mpu_ll.h
|
ESP32-H2: Last MR for g0 component support, (only hal left)
|
2022-12-05 17:32:21 +08:00 |
|
mwdt_ll.h
|
fix(wdt): changed WDT clock source to XTAL for C6/H2
|
2023-09-13 10:45:51 +08:00 |
|
parlio_ll.h
|
fix(parlio_tx): fix wrong dma descriptor setup
|
2023-09-27 14:53:53 +08:00 |
|
pau_ll.h
|
Power Management: support PAU REGDMA feature for esp32h2
|
2023-07-11 12:03:13 +08:00 |
|
pcnt_ll.h
|
pcnt: support pcnt on esp32h2
|
2023-01-13 16:11:50 +08:00 |
|
pmu_hal.h
|
Power Management: support DFS and PMU feature for esp32h2
|
2023-07-11 12:02:39 +08:00 |
|
pmu_ll.h
|
Power Management: support DFS and PMU feature for esp32h2
|
2023-07-11 12:02:39 +08:00 |
|
regi2c_ctrl_ll.h
|
hal: Fix missing definition for "bool" type
|
2023-03-16 01:50:22 +08:00 |
|
rmt_ll.h
|
feat(rmt): support calling rmt_receive in ISR callback
|
2023-11-15 05:57:45 +00:00 |
|
rtc_io_ll.h
|
change(driver/rtcio): Describe RTCIO CAPS with more accurate note
|
2023-08-03 16:46:55 +08:00 |
|
rwdt_ll.h
|
wdt: refactor wdt codes to use unified type
|
2023-02-15 12:08:55 +08:00 |
|
sar_ctrl_ll.h
|
bugfix: move adc_oneshot_power_acquire/release to adc_oneshot_read
|
2023-05-18 20:08:47 +08:00 |
|
sdm_ll.h
|
sdm: support sdm on esp32h2
|
2023-01-13 16:55:51 +08:00 |
|
sha_ll.h
|
esp32h2: add support for SHA peripheral
|
2023-01-30 10:08:58 +05:30 |
|
spi_flash_encrypted_ll.h
|
esp32h2: xts-aes register prefix discrepency
|
2023-06-15 13:53:35 +05:30 |
|
spi_flash_ll.h
|
ESP32-H2: Last MR for g0 component support, (only hal left)
|
2022-12-05 17:32:21 +08:00 |
|
spi_ll.h
|
fix(all): unify default mosi level to low on all targets
|
2023-07-26 20:34:25 +08:00 |
|
spimem_flash_ll.h
|
spi_flash: Allow clock frequency up to 64M, and make it default on ESP32H2
|
2023-03-10 11:39:53 +08:00 |
|
systimer_ll.h
|
systimer: assign counter and alarm in esp_hw_support
|
2023-01-10 17:05:49 +08:00 |
|
temperature_sensor_ll.h
|
fix(tempertuer_sensor): Fix regs on temperature sensor is not volatile due to GCC bug
|
2023-12-15 16:41:16 +08:00 |
|
timer_ll.h
|
feat(gptimer): add gptimer linker.lf to control the placement of driver and hal
|
2023-08-14 02:31:16 +00:00 |
|
twai_ll.h
|
twai: h2 support twai driver
|
2023-02-16 16:34:23 +08:00 |
|
uart_ll.h
|
fix(uart): Fix uart_ll_set_baudrate div-by-zero crash due to uint32_t overflow
|
2023-09-19 12:12:05 +08:00 |
|
usb_phy_ll.h
|
usj: bringup on esp32h2
|
2023-01-31 16:21:47 +08:00 |
|
usb_serial_jtag_ll.h
|
fix(esp_hw_support): fix lightsleep current leakage on usb-phy controlled pad
|
2023-11-16 20:03:30 +08:00 |
