- line was truncated because 64 characters were not sufficient
- length passed to snprintf should be full buffer length, not -1
- make the width of lock name field fixed
- fix alignment of lock type column
status is 0 when pcnt_hal_clear_intr_status() is called and so the
interrupt will be triggered immediatly again. Store the original
status and pass this as mask to pcnt_hal_clear_intr_status().
Merges https://github.com/espressif/esp-idf/pull/5929
During HAL layer refactoring and new chip bringup, we have several
caps.h for each part, to reduce the conflicts to minimum. But this is
The capabilities headers will be relataive stable once completely
written (maybe after the featues are supported by drivers).
Now ESP32 and ESP32-S2 drivers are relative stable, making it a good
time to combine all these caps.h into one soc_caps.h
This cleanup also move HAL config and pin config into separated files,
to make the responsibilities of these headers more clear. This is
helpful for the stabilities of soc_caps.h because we want to make it
public some day.
Sleep instruction removed from S2 instruction set.
LDx/STx instructions descritioin fix offset range to 13 bits (11 bits signed 32 bit words offset).
Remove I2C RD/WR operations from S2.
`uart_ll_get_txfifo_len` returns the number of bytes available in the
TX FIFO; The condition we need is "FIFO empty", not "FIFO has free
space". `uart_ll_is_tx_idle` does that, and also ensures that the last
character popped from the TX FIFO has been fully transmitted.
freertos: replace the freertos regular malloc to the specific malloc from xtensa port for tcb and stack allocations
freertos: avoid the cpu1 to unwind pended ticks when xTaskResumeAll is called insed of an ISR
freertos: protected the xPortGetCoreID functions with missing critical sections
tests: re-eanble the ignored tests that was failling before race-condition fixes
heap: ported tlsf allocator into multi heap
heap_host_tests: added tlsf allocator into host test
heap_host_test: update freebytes after using free
heap_tests: tlsf now passing on host tests without poisoning
multi_heap: added support for memalign using tlsf implementation
heap_caps: removed heap_caps_aligned_free
heap/test: fixed broken aligned alloc test build
heap: added poisoning pattern when blocks are being merged
heap/tests: added timing tests for memory allocation
heap: reduced tlsf structure overhead
heap/tlsf: made all short functions inside of tlsf module as inline to improve timings
heap: moved tlsf heap routines outside of flash memory
newlib: linked multiheap memalign with newlib memalign function
heap: moved block member functions to a separate file so multi_heap can use the functions
heap/test: improved the tlsf timing test
heap/test: added memalign on aligned alloc tests
heap: moved tlsf configuration constants to a separated file
heap: added random allocations test with timings
heap: modified the calculation of heap free bytes
heap: make aligned free true deprecated functions and update their documentation
heap: add extra assert after successive mallocs on small allocation host test
heap: remove legacy aligned alloc implementation.
performance: added malloc and free time performance default values
freertos/port: update the port files and split into xtensa and riscv ports
freertos: separated cpu files from rest of the kernel sources
freertos/port_xtensa: separated private include files into a folder
freertos/tasks: added task create pinned to core function do not break current IDF API
freertos/tasks: mimiced task create pinned function into tasks.c to do not break the IDF API.
freertos: freertos component now compiling
freertos: freertos component now building
freertos: moved critical sections outside from FR kernel section to portable section
portmacro_xtensa: add void indentifier on functions that take no arguments
freertos: fix critical sections implementation to match with their function prototype
freertos: add cmake changes of freertos into make
freertos: remove portDONT_DISCARD attribute from switch context function, it was breaking the docs building.
freertos: fix conflicitng types of vApplicationSleep function
license: update the license of freertos
freertos: Doxygen comments refactored to render them correctly on docs
freertos: added new functions of freertos into the documentation
freertos: added message buffers and stream buffers to documentation
sysview: update freertos system view to the compatible with version 10
freertos: fixed event group documentation rendering
freertos: update static task structure to match the actual tcb size
freertos: removed backported test functions
freertos/smp: brought SMP code to FreeRTOS 10 port
freertos/portmacro: added missing crosscore interrupt for yielding tasks
freertos: replaced soft-critical sections with hard-critical sections used by SMP
freertos: placed muxes inside of kernel objects
freertos: replaced original FR critical sections with SMP enabled spinlocks critical sections
freertos: moved xtensa port files to a separated folder
freertos: added multiple instance of global variables required to SMP
freertos: added SMP modifications on specific tasks module functions
freertos: added TLS deletion function to task module
freertos/tls: initialize TLS deletion callback to avoid crashing when calling task delete
freertos: modified vTaskDelete to do not erase current task that runs on other core
freertos: reverted taskhandle and timerhandle as void* type
freertos: fixed de-referencing void pointer to get run time counter
freertos: fix system view trace enter macro arguments
freertos: Replaced soft critical sections with spinlocks on event_groups
freertos: fixed tick function to avoid calling tick hooks twice
freertos: Nofity give checking per CPU if schedule is suspended
freertos: added mpu release on TCB deletion
freertos: Added SMP changes when deleting a TCB on idle task
freertos/license: update freertos license in COPYRIGHT.rst
freertos: unicore configurations can use task create pinned to core, it will be always pinned to core 0
freertos/portmacro: added cpu_hal_get_core_id() function instead of inline assembly
freertos/xtensa: update xtensa specific files used in master branch
newlib/locks: revert the preemption checking in lock acquisition and release
ref_clock: fix initial state of ref_clock interrupt handler
freertos: added missing critical sections and yielding checkings
freertos: remove magic numbers in vTaskDelete
freertos: added missing critical section in prvIsQueueEmpty
This commit fixes an issue with gdbstub, where it would list threads
with TIDs 1 to N in qfThreadInfo/qsThreadInfo responses, and then
would tell GDB that the current TID is 0 in the qC response. This
caused an assertion failure in GDB, because it couldn't find the
thread structure corresponding to TID 0:
src/gdb/gdb/thread.c:93: internal-error: thread_info* inferior_thread(): Assertion `tp' failed.
The issue was caused by the logic of qfThreadInfo/qsThreadInfo.
If the "paniced" task index was 1, the code would report it in the
response to qfThreadInfo, and then mistakenly skip task with index 0
in qsThreadInfo, due to the use of pre-increment instead of a
post-increment.
With that issue fixed, GDB assertion doesn't happen anymore. However
the code contained a deeper problem, which manifested itself in the
fact that GDB would incorrectly show task index 0 as the current task,
after the above fix.
Previous version of the code assumed that when GDB requests the thread
list, it uses the first thread returned by the target as the "default"
thread, and subsequently shows the user that the program is stopped
in that thread. This assumption was incorrect. In fact, after
connecting to a remote target, GDB obtains information about the
"default" or "current" thread from two sources:
1. the 'thread' special register indicated in the status response
($T00thread;00000001#ee)
2. if the target has only sent the plain stop response ($T00#ee), GDB
would ask for the current thread using a qC packet.
With that in mind, it is not necessary to report the paniced task as
the first task in qfThreadInfo response. We can simply returns the
tasks in their natural order, and then indicate the current task in
the qS packet response.
However even that change does not fully resolve the issues with task
list. The previous version of this code also incorrectly interpreted
the meaning of GDB TIDs -1 and 0. When GDB sends an "Hg0" command
early in the connection process, it doesn't expect the server to set
task 0 as the current task, as the code assumed. Rather, it tells the
server to "set any (arbitrary) task as the current one", and the most
logical thing to do for the server that is already in "stopped" state
is to keep the current task selection.
Since TID 0 has a special meaning in GDB remote protocol, gdbstub code
is now modified to map task indices (which start from 0) to GDB TIDs.
GDB TIDs are arbitrary, and for simplicity we keep the same order and
start counting them from 1.
The summary of all the above changes is:
1. Use "task index + 1" as the TID reported to GDB
2. Report the tasks in natural order; don't complicate the code to
make the paniced task first in the list.
3. Centralize modification of 'current_task_index' and 'regfile'
in the new 'set_active_task' function, to improve encapsulation.
Fix for issues where RTC FAST memory is updated as part of going into deep
sleep. Very high risk if heaps are in RTC memory - in particular task stacks
may be in RTC memory, but also other variables.
Also fixes potential concurrency problems as RTC FAST memory is not accessible
by CPU during the CRC calculation itself.
Method:
- Disable interrupts (currently for single core only, will need update for S3)
- Load all registers before calculating CRC or going to sleep
1. Add STA checks during STA PMF operations
2. Fix WPA2-Ent issue with Open AP
3. Skip WPA-TKIP profile if PMF is required
4. Skip & clear Supplicant PMK Cache with mismatching AP config
This commit adds the feature where the TWAI ISR will continue to
run even if the cache is disabled. Whilst cache is disabled, any
received messages will go into the RX queue, and any pending TX
messages in the TX queue will be transmitted. This feature should
be enabled using the CONFIG_TWAI_ISR_IN_IRAM option.
Previous versions of PartitionType only required type and subtype as
arguments for the constructor. Make the new part_list argument optional to
keep backwards compatibilty
A manufactory tool needs to retrieve info about partitions. With a new flag - "--part_list" we can get a list of partitions with the same type/subtype and easily iterate by it.
- name and flag arguments
- added flag "--part_list" to get a list of partitions with the same type/subtype
- save prev behavior of the get_partition_info command (return the only first item)
- added host test
The remaining 4 kB had been reserved for storing RF calibration and
BT stack state since 4e092be6. However, these features never got
implemented. If we ever need to place RF related data into RTC slow
memory, we can do this by creating a variable with RTC_NOINIT_ATTR
instead.
Closes https://github.com/espressif/esp-idf/issues/3993
GDB "-thread-info N" command (for a specific thread N) may fail if
GDB can not perform a backtrace. At the same time, "-thread-info"
command succeeds in this situation, returning information for all
threads.
Replace repeated calls to "-thread-info N" with a single call to
"-thread-info", also reducing the total execution time.
For getting secure_version field in anti rollback case, bootloader tries
to map whole firmware partition but fails for cases where partition size
is beyond available MMU free pages capacity.
Fix here insures to map only required length upto application descriptor
size in firmware partition.
Closes https://github.com/espressif/esp-idf/issues/5911
Setting cs num to -1 means cs pin is not connected. But passing the value -1 to the
spicommon_cs_initialize() will lead to program crash caused by "array index out
of bounds". We expect the driver to execute well but the driver should not be in
charge of users' behaviour, so this commit prevents the crash.
https://github.com/espressif/esp-idf/issues/5784
feature/intr_alloc: moved interrupt allocator to the esp-system and refactored it moving all platform specific code to its place
Closes IDF-1913
See merge request espressif/esp-idf!10267
esp_system: removed repeated interrupt allocator code and moved common code to esp_system
xtens: moved xtensa specific code from freertos to the xtensa component
hal/interrupt_controller: added interrupt controller hal and ll files
docs: update the doxyfile with new location of esp_itr_alloc.h file
xtensa: fixed dangerous relocation problem after moving xtensa interrupt files out of freertos
docs: removed Xtensa reference from intr_allocator api-reference
xtensa: pushed the interrupt function that manages non iram interrupts to the xtensa layer
esp_system/test: fixed platform dependent setting for intr_allocator tests
hal: rename the functions used to manage non iram interrupt mask.
Rewrite ble dynamic prio to fix ble disconn in conn_param_update/channel_map_update
Rewrite ble dynamic prio in connection establishment
Fix ble dynamic prio with latency
Fix status bit set error when conn fail
use eventgroup to sync spp_vfs_write
each connection has a switch_delay_timer not sharing a one
revert functions like spp_find_slot_by_xxx
fix vfs read bug when peer close
Since we have provided separate functions for deleting node
information with node's unicast address, device uuid, etc.
So we update the behavior of this function, which will only
be used to delete device information which is not provisioned
or just under provisioning.
