alex/esp-idf
alex/esp-idf
1
0
Fork 0
mirror of https://github.com/espressif/esp-idf.git synced 2024-10-05 20:47:46 -04:00
Code Issues Actions 2 Packages Projects Releases Wiki Activity
22,570 Commits 20 Branches 148 Tags 384 MiB
e254d1f855
Commit Graph

37 Commits

Author SHA1 Message Date
Cao Sen Miao
52e88a0073 spi_flash: esptool temporarily supports C2/H2 clock configurations 2022-04-11 10:46:02 +08:00
rudi ;-)
f242a1705a
add support for Flash 32MB..128MB (S2, S3) 
ESP32-S2 and ESP32-S3
supports up to 1 GB of external flash and RAM
add support for
-    32MB
-    64MB
-    128MB ( example NOR spiFLASH 1G-BIT W25Q01JVZEIQ Winbond 0xEF 0x40 0x21 )

Merges https://github.com/espressif/esp-idf/pull/7688

Signed-off-by: Ivan Grokhotkov <ivan@espressif.com>
 2022-02-21 10:26:41 +03:00
Roland Dobai
36a4011ff8 Tools: Custom baud-rate setup is not possible for IDF Monitor from menuconfig anymore 
IDF Monitor follows the console baud rate by default. Other baud rate
can be set from command line by "idf.py monitor -B <baud>" or through
environment variables. Run "idf.py monitor --help" for more information.
 2022-01-24 18:13:38 +01:00
Roland Dobai
aedb846a20 Tools: IDF Monitor follows the UART console baud rate by default 2022-01-24 18:13:38 +01:00
laokaiyao
cf049e15ed esp8684: rename target to esp32c2 2022-01-19 11:08:57 +08:00
wuzhenghui
388615add0 update esp32h2beta2 chip_id to 14 2021-11-24 12:30:43 +08:00
wuzhenghui
968c42d88c 822 FPGA rnv init 2021-11-24 12:30:17 +08:00
Roland Dobai
9c1d4f5b54 Build & config: Remove the "make" build system 
The "make" build system was deprecated in v4.0 in favor of idf.py
(cmake). The remaining support is removed in v5.0.
 2021-11-10 09:53:53 +01:00
Cao Sen Miao
9ab043574d ESP8684: update esptool 2021-11-06 17:33:45 +08:00
Armando
f9fa38463a spi_flash: make 120m config only visible on s3 sdr mode 2021-10-28 19:36:34 +08:00
Armando
2655a506c9 mspi: support auto detect octal flash vendor 2021-10-08 15:59:57 +08:00
Cao Sen Miao
6c0aebe279 esp_flash: add opi flash support in esp_flash chip driver, for MXIC 2021-09-07 14:44:40 +08:00
Cao Sen Miao
559c1ac3f9 esp_flash: add support mxic as a main flash under spi mode 2021-09-05 00:33:28 +08:00
Armando
a3dc625da6 mspi: support 120MHz Quad Flash and PSRAM on ESP32S3 2021-08-31 16:06:44 +08:00
sly
11dfd802e0 esp32h2: add rtc clock support 2021-08-26 11:25:39 +08:00
Armando
d325f4d557 mspi: support octal flash 120M STR mode on esp32s3 2021-08-19 10:44:30 +08:00
Shu Chen
2b9e8fed71 esp32h2: add esp32h2 build target 
Add esp32h2 support in the following components:
 * Kconfig
 * components/esptool_py
 * components/riscv
 * components/xtensa
 * tools
 2021-07-01 19:51:33 +08:00
Armando
bc248278f8 spiflash: add octal spi psram support on 727 2021-06-25 19:41:57 +08:00
me-no-dev
b64fd872bc Allow esptool's download stub to be disabled by other options and applications 
Currently USB CDC Download requires the `--no-stub` option of `esptool`. This change inverts the Kconfig option to negative, so that it can be `selected` by other options or enabled in applications through `sdkconfig.defaults`.
 2020-09-16 03:25:53 +00:00
Angus Gratton
f1ac79747b monitor: Add a "Same as UART Console baud rate" setting 
Usually the monitor will want to run at the same speed as the boot log output.
 2020-07-10 16:58:05 +10:00
Angus Gratton
d45eabe676 esptool: Add support for ESP32-S2 Secure Download Mode 
* Pass --no-stub from build system if configured to enable ESP32-S2 Secure Download Mode
* Update esptool submodule
 2020-05-28 17:52:15 +10:00
Angus Gratton
5bd75b134d esptool: Set 80MHz SPI flash speed for ESP32-S2 & future chips 
Most ESP32 devices will also work at 80MHz, but third party boards/modules
may not have been tested at this speed so the default is kept at 40MHz for safety.
 2020-05-20 06:19:34 +00:00
Angus Gratton
47bbb107a8 build system: Use CMake-based build system as default when describing commands 2019-07-08 17:31:27 +10:00
Roland Dobai
997b29a9ca Rename Kconfig options (components/esptool_py) 2019-05-21 09:32:55 +02:00
Roland Dobai
37126d3451 Correct Kconfigs according to the coding style 2019-01-29 13:37:01 +01:00
Angus Gratton
2909fc182b esptool: Remove tabs from KConfig.projbuild 2018-05-29 16:34:45 +10:00
Angus Gratton
2f4079ebb2 cmake: Hide serial port settings in menuconfig when using cmake 2018-05-29 16:34:45 +10:00
Angus Gratton
4a2f1f0354 esptool: Add note that ESPTOOLPY_PORT & ESPTOOLPY_BAUD are ignored when using idf.py 2018-04-30 09:59:20 +10:00
Angus Gratton
527720fb5b esptool: Update esptool.py to integrate reset fix for older dev boards 
Originally marked "Reset with ESP32R0 Windows workaround", but proven to be
necessary on some other platforms as well. This is now integrated into the
default esptool.py reset behaviour.

Closes #305 https://github.com/espressif/esp-idf/issues/305
 2017-03-03 15:34:04 +11:00
Angus Gratton
68cba2a1fb Bootloader: Support switching to Quad I/O mode during boot process 2017-02-09 08:44:05 +11:00
Angus Gratton
03551ec2da build system: Add 'make monitor' target from arduino-esp32 
Originally added to arduino-esp32 by @me-no-dev. It's so useful, we
want it in esp-idf as well! :)
 2017-01-03 10:59:10 +11:00
Angus Gratton
d245f016ea esptool: Add new options to reset before/after, detect flash size 2016-12-30 14:19:46 +11:00
Ivan Grokhotkov
42827ff869 bootloader, menuconfig: add flash size setting support 2016-10-21 15:27:25 +11:00
Jeroen Domburg
5a0e374a46 Set default SPI flash access mode to DIO 2016-09-08 10:22:15 +08:00
Jeroen Domburg
669e85758c Add flash freq selection to menuconfig 2016-09-06 14:24:28 +08:00
Jeroen Domburg
4272996ebe Add QIO/QOUT/DIO/DOUT select for esptool.py 2016-09-06 14:24:14 +08:00
Ivan Grokhotkov
bd6ea4393c Initial public version 2016-08-17 23:08:22 +08:00