wuzhenghui
4c78de50f4
fix(hal): fix PMU LL half word and byte access
2024-06-07 14:18:24 +08:00
wuzhenghui
4d6793a44a
fix(hal): fix LP timer LL half word access
2024-06-07 14:18:22 +08:00
morris
8318a2ad44
Merge branch 'feature/usb_new_phy_driver_collective_backport_v5.1' into 'release/v5.1'
...
refactor(usb/host): PHY driver preqrequisite refacotring collective backport (v5.1)
See merge request espressif/esp-idf!29791
2024-05-31 22:30:32 +08:00
Li Shuai
08a05ec562
change(esp_hw_support): use new retention api to implement gdma retention
2024-05-14 19:34:37 +08:00
Darian Leung
4f996fc421
feat(hal/usb): Update USB WRAP and USJ LL
...
- Added LL cap macros to distinguish feature differences between the LLs of
different targets:
- '..._LL_EXT_PHY_SUPPORTED' indicates whether the USB WRAP/USJ supports
routing to an external FSLS PHY.
- Added 'usb_wrap_types.h' and 'usb_serial_jtag_types.h' to provide types used
in LLs.
- Fixed some spelling/naming issues as part of code-spell pre-commit
2024-05-13 17:36:34 +08:00
Darian Leung
c776d40df1
refactor(hal/usb): Remove usb_fsls_phy_ll.h
...
For targets that only contain a USJ peripheral (and not a DWC OTG), their
'usb_fsls_phy_ll.h' headers only contain a single function
('usb_fsls_phy_ll_int_jtag_enable()') whose feature is already covered by
functions in 'usb_serial_jtag_ll.h'. Thus, this header is redundant.
This commit does the following:
- Remove 'usb_fsls_phy_ll.h' for targets that only contain a USJ peripheral
- Rename 'usb_fsls_phy_[hal|ll].[h|c]' to `usb_wrap_[hal|ll].[h|c]` for targets
that contain a DWC OTG peripheral. This better reflects the underlying peripheral
that the LL header accesses.
2024-05-13 17:36:33 +08:00
Darian Leung
75498cdb7a
refactor(hal/usj): Add USB PHY related functions to USJ LL
2024-05-13 17:36:32 +08:00
morris
9808619d52
Merge branch 'bugfix/fix_gpio_etm_multi_task_v5.1' into 'release/v5.1'
...
fix(gpio_etm): allow one GPIO binds to multiple ETM tasks (v5.1)
See merge request espressif/esp-idf!30457
2024-05-13 15:59:44 +08:00
morris
442a798083
Merge branch 'feat/add_example_usj_v5.1' into 'release/v5.1'
...
change(usb_serial_jtag): Add example for usb serial jtag echo (backport v5.1)
See merge request espressif/esp-idf!30020
2024-05-11 22:37:34 +08:00
Song Ruo Jing
a664c71fd7
fix(uart): Fix mismatch wakeup rising edges required with the threshold configured
...
Closes https://github.com/espressif/esp-idf/issues/12586
2024-04-24 17:21:37 +08:00
Song Ruo Jing
c57bfa3737
fix(gpio_etm): allow one GPIO binds to multiple ETM tasks
2024-04-24 17:10:03 +08:00
Jeroen Domburg
28e2ab09ea
fix(driver): Add docs and driver fix for the case where a full EP does not cause the host to pickup the data
2024-04-07 10:46:34 +08:00
Jiang Jiang Jian
f87ee9c4ec
Merge branch 'bugfix/fix_c6_wakeup_access_flash_v5.1' into 'release/v5.1'
...
fix(hal): fix esp32c6 clock bug workaround access flash in wakeup process (v5.1)
See merge request espressif/esp-idf!29245
2024-03-05 10:58:14 +08:00
Darian Leung
d837836f84
refactor(hal/usb): Rename usb_fsls_phy API to match header/source names
...
Note: Also fixed some formatting issues in usb_wrap_struct.h
2024-02-28 16:09:52 +08:00
Darian Leung
148cc6e75d
refactor(hal/usb): Rename usb_phy files to usb_fsls_phy
...
This commit renames USB PHY related HAL files from "usb_phy_xxx" to
"usb_fsls_phy_xxx" since they are only designed to support Full-Speed/Low-Speed
Serial USB PHYs. This renmaing is done to accommodate future USB PHYs that use
other PHY interfaces (e.g., UTMI, ULPI etc).
2024-02-28 16:09:52 +08:00
wuzhenghui
12dca8d086
fix(hal): fix esp32c6 clock bug workaround access flash in wakeup process
2024-02-26 11:42:38 +08:00
hongshuqing
80378b809e
feat(pmu): set fix voltage to different mode for esp32c6
2024-02-22 15:01:14 +08:00
Lou Tianhao
1e43abfb57
change(pm): put pmu_hal to iram
2024-01-16 14:01:22 +08:00
xiaqilin
a9679450b2
fix(ieee802154): fix the issue of not receiving packets when RSSI is positive in esp32h2
2024-01-04 15:09:42 +08:00
Jiang Jiang Jian
6e57f35873
Merge branch 'backport/add_dynamic_iram_check_for_ot_sleep_v51' into 'release/v5.1'
...
fix(pm): fix extra retention function to iram(Backportv5.1)
See merge request espressif/esp-idf!28134
2023-12-29 12:26:04 +08:00
wuzhenghui
53afab3850
feat(ulp): add api to get lp_cpu wakeup cause and clear wakeup source at startup
...
Closes https://github.com/espressif/esp-idf/issues/12651
2023-12-28 13:31:55 +08:00
zwx
81123259ff
fix(pm): fix extra retention function to iram
...
* Also remove unused function on H2
2023-12-26 19:20:44 +08:00
Cao Sen Miao
dfff867379
fix(tempertuer_sensor): Fix regs on temperature sensor is not volatile due to GCC bug
2023-12-15 16:41:16 +08:00
morris
1b78d57496
Merge branch 'bugfix/bod_reset_c6_h2_v5.1' into 'release/v5.1'
...
fix(bod): Reset brownout in configuration to avoid RF cannot be enabled again(backport v5.1)
See merge request espressif/esp-idf!27723
2023-12-14 11:05:55 +08:00
wuzhenghui
4a7d9dd387
fix(esp_hw_support): re-initialize icg map in modem_clock_module_enable
2023-12-08 14:22:36 +08:00
morris
5e29bd5370
Merge branch 'bugfix/fix_adc_continuous_do_not_rst_apb_clk_v5.1' into 'release/v5.1'
...
fix(adc): fix adc continuous get less results beacuse do not reset apb clk (v5.1)
See merge request espressif/esp-idf!27604
2023-12-07 21:27:05 +08:00
Lou Tianhao
c1782faf0f
fix(pm/ext1): fix c6 h2 lp_aon_ll_ext1_set_wakeup_pins func
2023-12-07 03:52:22 +00:00
Cao Sen Miao
9dd90e2d9b
fix(bod): Reset brownout in configuration to avoid RF cannot be enabled again
2023-12-07 10:33:58 +08:00
gaoxu
57a5c4684c
fix(adc): fix adc continuous get less results beacuse do not reset apb clk
2023-12-06 10:19:45 +00:00
Shu Chen
ecbbd3c3d9
Merge branch 'backport/add_ot_radio_stats_enable_config_5_1' into 'release/v5.1'
...
feat(openthread): backport some openthread features(BackportV5.1)
See merge request espressif/esp-idf!26885
2023-11-22 12:23:53 +08:00
morris
64e7343e40
Merge branch 'bugfix/fix_adc_read_zero_h2_v5.1' into 'release/v5.1'
...
ADC: fix adc raw data get 0 because of signal delay on ESP32H2(v5.1)
See merge request espressif/esp-idf!26976
2023-11-21 11:08:57 +08:00
Jiang Jiang Jian
e718b603e4
Merge branch 'bugfix/clear_ulp_wake_intr_in_wake_source_enable_v5.1' into 'release/v5.1'
...
fix(esp_hw_support): clear all type ULP wakeup intr status at ulp wakeup source enable (backport v5.1)
See merge request espressif/esp-idf!27188
2023-11-21 10:52:54 +08:00
Jiang Jiang Jian
0e1ec38785
Merge branch 'bugfix/fix_lightsleep_current_leakage_on_usj_pad_v5.1' into 'release/v5.1'
...
fix(esp_hw_support): fix lightsleep current leakage on usb pad (backport v5.1)
See merge request espressif/esp-idf!27205
2023-11-21 10:51:11 +08:00
morris
ddb6d22468
Merge branch 'feature/gpio_dump_io_info_v5.1' into 'release/v5.1'
...
feat(gpio): add a dump API to dump IO configurations (v5.1)
See merge request espressif/esp-idf!26870
2023-11-17 16:30:22 +08:00
morris
ceb0aec0cc
Merge branch 'bugfix/rmt_stop_issue_v5.1' into 'release/v5.1'
...
fix(rmt): a disabled channel may pick up a pending transaction (v5.1)
See merge request espressif/esp-idf!26779
2023-11-17 16:27:21 +08:00
gaoxu
1179d9859f
fix(adc): fix h2 adc oneshot read zero and add delay after getting done signal v5.1
2023-11-17 02:16:21 +00:00
wuzhenghui
6ae596c764
fix(esp_hw_support): fix lightsleep current leakage on usb-phy controlled pad
2023-11-16 20:03:30 +08:00
wuzhenghui
61bb3fb67f
fix(esp_hw_support): clear all type ULP wakeup intr status at ulp wakeup source enable
2023-11-16 11:49:40 +08:00
morris
bfeae3857c
feat(rmt): support calling rmt_receive in ISR callback
2023-11-15 05:57:45 +00:00
Chen Jichang
0ce2683d81
feature(MCPWM): Add MCPWM trigger driver and test
...
Each MCPWM operator has two Trigger (named T0 and T1), and they can be
routed to GPIO fault signal or timer sync event.Generator can be set up
to perform different action on Trigger event.
This commit add a trigger driver and a test for the driver.
2023-11-15 05:57:37 +00:00
Song Ruo Jing
4892c481b5
feat(gpio): add a dump API to dump IO configurations
...
Merges https://github.com/espressif/esp-idf/pull/12511
2023-11-03 16:21:31 +08:00
Lou Tianhao
9b3e40c9d1
feat(pm/deepsleep): Support EXT1_WAKEUP_MODE_PER_PIN
2023-11-03 11:02:56 +08:00
morris
9b4a42e728
feat(mcpwm): support update timer period dynamically
...
Implement the requirement asked in
https://www.esp32.com/viewtopic.php?f=13&t=35919
2023-10-24 10:11:47 +08:00
Michael (XIAO Xufeng)
c1c843f5e2
Merge branch 'bugfix/fix_adc_sar_set_power_mode_no_effect_v5.1' into 'release/v5.1'
...
ADC: Fixed wrong ADC reading issue caused by ADC and WiFi power conflict on ESP32C6(backport v5.1)
See merge request espressif/esp-idf!26235
2023-10-12 15:18:18 +08:00
wuzhenghui
49013a0560
feat(modem_clock): separate management of modem_adc_common_fe clock and modem_private_fe
2023-09-28 16:24:39 +00:00
gaoxu
b183b88463
fix(adc): power settings not taking into effect on C6
2023-09-28 16:24:39 +00:00
morris
e5c8434c6e
fix(parlio_tx): fix wrong dma descriptor setup
2023-09-27 14:53:53 +08:00
Eduardo Lacerda Campos
9cd0aee51b
fix(uart): Fix uart_ll_set_baudrate div-by-zero crash due to uint32_t overflow
...
Merges https://github.com/espressif/esp-idf/pull/12179
2023-09-19 12:12:05 +08:00
Marius Vikhammer
41a291fee0
fix(wdt): changed WDT clock source to XTAL for C6/H2
...
Previously it used PLL, but PLL could potentially be powered down by power-management
when CPU frequency changed.
2023-09-13 10:45:51 +08:00
morris
5baf0197f0
Merge branch 'feature/modify_mcpwm_clock_pre_scale_v5.1' into 'release/v5.1'
...
feat(mcpwm): Make the MCPWM capture timer's resolution configurable (v5.1)
See merge request espressif/esp-idf!25904
2023-09-12 11:30:39 +08:00