Commit Graph

22 Commits

Author SHA1 Message Date
Gustavo Henrique Nihei
3cbac3dd1d esp_system: Ensure TIMG0 clock is always enabled during normal operation
If the TimerGroup 0 clock is disabled and then reenabled, the watchdog
registers (Flashboot protection included) will be re-enabled, and some
seconds later, will trigger an unintended reset.

Signed-off-by: Gustavo Henrique Nihei <gustavo.nihei@espressif.com>
2023-03-06 04:58:11 +00:00
harshal.patil
04cc562180 mbedtls: enable RSA support for esp32h2 2023-03-01 14:18:57 +05:30
Song Ruo Jing
2c2a62e323 clk_tree: Add basic clock support for esp32h2
- Support SOC ROOT clock source switch
- Support CPU frequency change
- Support RTC SLOW clock source switch
- Support RTC SLOW clock + RC FAST calibration

Remove FPGA build for esp32h2
2023-02-20 17:15:02 +08:00
Song Ruo Jing
981d6a67b0 clk: Add basic clock support for esp32h2 2023-01-03 11:00:32 +08:00
Cao Sen Miao
8cc9260f86 ESP32H2: Add system support for ESP32H2 2022-12-07 11:38:51 +08:00
Cao Sen Miao
86aa4df5b5 ESP32-H2: Introduce new target for ESP32H2 2022-11-23 14:38:05 +08:00
laokaiyao
8677216576 esp32h2: renaming esp32h2 to esp32h4 2022-11-08 17:05:33 +08:00
jingli
60c1811433 esp_hw_support/clk_cali: remove redundant check for cali value 2022-09-21 03:03:25 +00:00
Guillaume Souchere
6005cc9163 hal: Deprecate interrupt_controller_hal.h, cpu_hal.h and cpu_ll.h interfaces
This commit marks all functions in interrupt_controller_hal.h, cpu_ll.h and cpu_hal.h as deprecated.
Users should use functions from esp_cpu.h instead.
2022-07-22 00:06:06 +08:00
KonstantinKondrashov
ac4c7d99fe dport: Move DPORT workaround to G0 2022-05-31 13:44:18 +08:00
songruojing
a5b09cf015 rtc_clk: Clean up some clock related enum and macro in soc/rtc.h, replace with new ones in
soc/clk_tree_defs.h
2022-05-24 22:59:41 +08:00
Marius Vikhammer
d2872095f9 soc: moved kconfig options out of the target component.
Moved the following kconfig options out of the target component:
 * CONFIG_ESP*_DEFAULT_CPU_FREQ* -> esp_system
 * ESP*_REV_MIN -> esp_hw_support
 * ESP*_TIME_SYSCALL -> newlib
 * ESP*_RTC_* -> esp_hw_support

Where applicable these target specific konfig names were merged into
a single common config, e.g;
CONFIG_ESP*_DEFAULT_CPU_FREQ -> CONFIG_ESP_DEFAULT_CPU_FREQ_MHZ
2022-04-21 12:09:43 +08:00
Marius Vikhammer
ca3c056ac9 kconfig: replace deprecated options with new values 2022-03-15 16:28:53 +08:00
songruojing
c1dedb33fa esp_system: replace the range comparsion for reset reason in perip clk init with specific reset reason check, also add a test case in LEDC to check for the perip clk not being disabled after cpu reset 2022-02-09 15:54:34 +08:00
Cao Sen Miao
eddc196081 esp_clk: refactor target/clk.h to private/esp_clk.h 2021-11-26 14:56:30 +08:00
morris
16677b0d3c global: make periph enable/disable APIs private
peripheral enable/disable usually should be managed by driver itself,
so make it as espressif private APIs, not recommended for user to use it
in application code.
However, if user want to re-write the driver or ports to other platform,
this is still possible by including the header in this way:
"esp_private/peripheral_ctrl.h"
2021-11-08 10:37:47 +08:00
sly
11dfd802e0 esp32h2: add rtc clock support 2021-08-26 11:25:39 +08:00
wuzhenghui
6ab495b4dc esp32h2: chip env support
brownout init fixed
2021-08-25 11:02:47 +08:00
morris
1560d6f1ba soc: add reset reasons in soc component 2021-07-13 10:45:38 +08:00
Shu Chen
ee23a489b9 esp32h2: code clean up 2021-07-01 19:53:50 +08:00
Shu Chen
5e3689ae0f esp32h2: update esp_system and esp_hw_support to support esp32h2 2021-07-01 19:53:11 +08:00
Shu Chen
7d4b2617e1 esp32h2: copy esp_system and esp_hw_support from esp32c3
Copy the esp32c3 code without any change:
 * components/esp_hw_support/include/soc/esp32h2
 * components/esp_hw_support/port/esp32h2
 * components/esp_system/port/soc/esp32h2
2021-07-01 19:53:11 +08:00