harshal.patil
c94986d793
fix(mbedtls): Fix https_request example build failure for mbedtls_config
...
- This was caused due to some mbedtls confisg being defined but their all prerequisites were not
2024-08-27 14:09:21 +05:30
Laukik Hase
e8477fb894
feat(mbedtls): Extend the esp_sha
API to support SHA224 operations
2024-08-07 10:03:11 +05:30
Mahavir Jain
64fd14e787
feat(mbedtls): add kconfig option for MBEDTLS_ERROR_C
...
Disabling this config can reduce footprint for the cases where
mbedtls_strerror() is used and hence the debug strings are getting
pulled into the application image.
2024-04-04 09:20:28 +05:30
harshal.patil
e383616503
fix(mbedtls/aes): Fix incorrect dma alignment size
2024-04-02 14:30:14 +08:00
Aditya Patwardhan
d0a23799e8
feat(mbedtls): Added support for using ECDSA key through key manager
2024-04-01 14:37:12 +05:30
harshal.patil
211a2a5477
feat(mbedtls/sha): Support SHA-DMA operations by satisfying L1 cache alignment requirements
...
- Use block mode as default SHA operation mode instead of DMA
2024-03-27 11:23:29 +05:30
harshal.patil
d737625215
feat(mbedtls/sha): Support in AXI-DMA SHA driver layer
2024-03-27 11:23:29 +05:30
harshal.patil
2abb656ba2
feat(mbedtls/aes): Support AES-DMA operations by satisfying L1 cache alignment requirements
...
- Use DMA RX done interrupt status bit while waiting for DMA rx transfer
2024-03-13 15:22:07 +05:30
harshal.patil
83dd60307f
feat(mbedtls/esp_crypto_shared_gdma): support AXI-DMA in the crypto shared gdma layer
...
- In case of AXI-DMA, the DMA descriptors need to be 8 bytes aligned
lldesc_t do not satify this condition thus we need to replace it with
dma_descriptor_t (align(4) and align(8)) in esp_crypto_shared_gdma.
- Added new shared gdma start API that supports the dma_descriptor_t
DMA descriptor.
- Added some generic dma descriptor macros and helper functions
- replace lldesc_t with dma_descriptor_t
2024-03-13 15:22:06 +05:30
harshal.patil
2c570ed53b
change(mbedtls/aes): moved esp_aes_internal.h to be a private header
...
- Also enable AES-GCM test in the hal crypto test app for all targets
2024-03-13 15:22:06 +05:30
harshal.patil
8977be856d
fix(mbedtls/gcm): Add support for software fallback for non-AES ciphers in a GCM operation
...
- Even if the config MBEDTLS_HARDWARE_AES is enabled, we now support fallback
to software implementation of GCM operations when non-AES ciphers are used.
2024-02-23 10:47:30 +05:30
nilesh.kale
aab3f604ec
feat(hal/testapps): Added AES and SHA testcases with DMA support
2024-02-09 14:23:06 +05:30
Aditya Patwardhan
4dc2ace0b7
fix(esp_hw_support): Update key manager support
...
1) Added new Key Manager APIs
2) Added crypto locking layer for Key Manager
3) Remove support for deploying known key
4) Format key manager support
5) Fix build header error
6) Updated the key_mgr_types.h file
7) Added key manager tests
2024-01-23 10:24:39 +05:30
Mahavir Jain
fec7fc30f1
fix(api-docs): include in the ECDSA APIs for doxygen build
2023-11-15 09:42:27 +05:30
Mahavir Jain
7bb29086df
docs: add ECDSA peripheral chapter for H2/P4
...
- Add ECDSA peripheral chapter and instructions to program efuse key block
- Update security guide for ECDSA peripheral mention for device identity
- Link with ESP-TLS guide about using ECDSA peripheral in TLS connection
2023-11-15 09:42:26 +05:30
Mahavir Jain
804ed172dd
fix(mbedtls): allow to use built in entropy implementation for linux target
2023-10-26 15:12:42 +05:30
Mahavir Jain
0c3ed4f540
fix(mbedtls): remove deprecated MBEDTLS_X509_ALLOW_UNSUPPORTED_CRITICAL_EXTENSION
...
This config has been removed in the upstream mbedTLS starting 3.0
release. Please see mbedTLS changelog for more details.
2023-10-11 09:32:32 +00:00
Mahavir Jain
9ca8f3d45b
feat(mbedtls): update to 3.5.0 release
...
Changelog:
https://github.com/Mbed-TLS/mbedtls/releases/tag/mbedtls-3.5.0
2023-10-11 09:32:32 +00:00
Kapil Gupta
c82a792bc3
change(esp_wifi): Port fast_pbkdf2 implementation for mbedlts
...
Add changes to use fast_pbkdf2 as default for PMK calculations.
fast_pbkdf2 is significantly faster than current implementations
for esp chips.
Also removes unnecessary code for pbkdf-sha256 and pbkdf-sha512.
2023-09-11 19:33:17 +05:30
Aditya Patwardhan
a57c8dc938
Merge branch 'contrib/github_pr_12177' into 'master'
...
mbedtls: define MBEDTLS_SSL_CID_TLS1_3_PAD_GRANULARITY for CID padding (GitHub PR)
See merge request espressif/esp-idf!25826
2023-09-09 12:27:56 +08:00
Daniel Mangum
35c428b0ec
mbedtls: define MBEDTLS_SSL_CID_TLS1_3_PAD_GRANULARITY for CID padding
...
Updates config to define the new MBEDTLS_SSL_CID_TLS1_3_PAD_GRANULARITY
option, which replaced the previously used
MBEDTLS_SSL_CID_PADDING_GRANULARITY. The old option is continuing to be
used as the new one exceeds the maximum length for an option name in
esp-idf.
See https://github.com/Mbed-TLS/mbedtls/pull/4490 for more information.
Signed-off-by: Daniel Mangum <georgedanielmangum@gmail.com>
2023-09-08 11:45:55 +05:30
harshal.patil
4c0dd8388b
feat(mbedtls): Integrate the ecdsa export public key feature in mbedtls
2023-09-06 11:07:40 +05:30
Jiang Guang Ming
3f2746688c
feat(mbedtls): support ecp fixed-point multiplication configurable
2023-08-08 14:03:57 +08:00
Linda
65ee4992ce
docs: update the algorithm and key name from AES-XTS to XTS-AES
2023-05-15 17:54:50 +08:00
harshal.patil
9a87b26294
mbedtls: fix sha-512 block mode build error
2023-05-08 10:27:34 +05:30
Mahavir Jain
3fd171f092
mbedtls: fix small typo in the config file
2023-04-25 17:44:28 +05:30
harshal.patil
f30b58f665
mbedtls: Update config options as per release/v3.4.0
...
- Added a Kconfig option for the newly added mbedtls option MBEDTLS_PKCS7_C
2023-04-17 12:50:15 +05:30
Sachin Parekh
d634970ed1
ecdsa: Support multiple ECDSA keys
...
Add provision to choose which efuse block should be used as ECDSA
private key
2023-04-07 14:55:21 +05:30
Sachin Parekh
d2940c5ff3
mbedtls: Add port layer for ECDSA peripheral
2023-03-24 10:43:40 +05:30
harshal.patil
270ff95022
mbedtls/port: refactor sanity checks and their return values
...
Refactored and returned correct error codes for sanity checks
present in port layer esp_aes.c and esp_aes_gcm.c
2023-01-16 15:04:08 +05:30
Laukik Hase
59de3948dc
mbedtls: Update config options as per v3.3.0 release
2023-01-09 15:41:36 +05:30
LiPeng
5c93fe47cb
mbedtls: GCM implementation is replaced with CTR-based calculation
...
- GCM operation in mbedtls used ECB, which calculated only 16 bytes of data each time.
- Therefore, when processing a large amount of data, it is necessary to frequently set hardware acceleration calculations,
- which could not make good use of the AES DMA function to improve efficiency.
- Hence, GCM implementation is replaced with CTR-based calculation which utilizes AES DMA to improve efficiency.
2022-12-28 12:14:29 +05:30
jgujarathi
915fb4dfe2
Removed some occurences of the RC4 cipher suite(deprecated now)
2022-10-26 03:02:16 +00:00
Sachin Parekh
aa4437d3d3
mbedtls: Override ecp_mul_restartable_internal
...
ECDSA verification uses ecp_mul_restartable_internal instead
of the public API mbedtls_ecp_mul_restartable
2022-08-24 11:59:35 +05:30
Marius Vikhammer
f4c79687f8
SHA: added hardware support for SHA on C2.
2022-06-23 11:01:16 +08:00
Laukik Hase
28ac0b12fb
mbedtls: Remove deprecated options from mbedtls/esp_config.h
...
- Removed options related to RC4 ciphersuite, SSL3 and TLS1
(as per mbedtls v3.1.0)
2022-05-28 10:21:06 +05:30
Mahavir Jain
93987e6b79
Merge branch 'fix/remove_test_cert_files_from_mbedtls_port_directory' into 'master'
...
mbedtls: Remove certs.c and certs.h from port directory
Closes IDF-4709
See merge request espressif/esp-idf!17485
2022-03-18 16:47:53 +08:00
Aditya Patwardhan
f31d8dd295
mbedtls: Remove certs.c and certs.h from port directory
2022-03-15 17:16:07 +05:30
Laukik Hase
1c65ab5307
mbedtls: Add config for MBEDTLS_PLATFORM_TIME_ALT
2022-03-14 09:42:33 +05:30
Sachin Parekh
32a6550e87
mbedtls: Added ECC hardware accelerator support on ESP32C2
...
ESP32C2 has a ECC hardware accelerator capable of performing point
multiplication and point verification with a significant performance
boost
2022-03-08 14:05:23 +00:00
Aditya Patwardhan
4582af75b8
mbedtls: Update licenses of files updated in mbedtls-3.1 update
2022-03-04 05:18:58 +00:00
Aditya Patwardhan
8cbfb18037
mbedtls-3.x: Update Kconfig macros
2022-03-03 01:37:10 +05:30
Aditya Patwardhan
8111286668
Add entropy_poll.h in port directory
2022-03-03 01:37:10 +05:30
Aditya Patwardhan
66a9243d3b
mbedtls 3.X update:
...
*MBEDTLS_ECDH_LEGACY_CONTEXT is now disabled by default.
*Fixed MBEDTLS_ECDH_LEGACY_CONTEXT issue for protocomm component.
*Removed all code under MBEDTLS_DEPRECATED_REMOVED
2022-03-03 01:37:10 +05:30
Laukik Hase
3925365351
ci: Fix pre-check
stage failing tests
...
- Updated license headers
- Re-enabled public headers and static analysis checks
- Fix public header file check failure
Co-authored-by: Aditya Patwardhan <aditya.patwardhan@espressif.com>
2022-03-03 01:37:10 +05:30
Aditya Patwardhan
3b71bd7326
mbedtls-3.0: Fixed ESP32 build issues
...
- Added MBEDLTS_PRIVATE(...) wherever necessary
- For functions like mbedtls_pk_parse_key(...), it is necessary to pass the RNG function
pointers as parameter. Solved for dependent components: wpa_supplicant & openSSL
- For libcoap, the SSLv2 ClientHello handshake method has been deprecated, need to handle this.
Currently, corresponding snippet has been commented.
- Examples tested: hello-world | https_request | wifi_prov_mgr
mbedtls-3.0: Fixed ESP32-C3 & ESP32-S3 build issues
- Removed MBEDTLS_DEPRECATED_REMOVED macro from sha1 port
- DS peripheral: esp_ds_rsa_sign -> removed unsused 'mode' argument
- Added MBEDTLS_PRIVATE(...) wherever required
mbedtls-3.0: Fixed ESP32-S2 build issues
- Fixed outdated function prototypes and usage in mbedlts/port/aes/esp_aes_gcm.c due to changes in GCM module
mbedtls-3.0: Fixed ESP32-H2 build issues
ci: Fixing build stage
- Added MBEDTLS_PRIVATE(...) wherever required
- Added RNG function parameter
- Updated GCM Module changes
- Updated Copyright notices
- Tests:
- build_esp_idf_tests_cmake_esp32
- build_esp_idf_tests_cmake_esp32s2
- build_esp_idf_tests_cmake_esp32c3
- build_esp_idf_tests_cmake_esp32s3
ci: Fixing build stage (mbedtls-related changes)
- Added MBEDTLS_PRIVATE(...) wherever required
- Updated SHAXXX functions
- Updated esp_config according to mbedtls changes
- Tests:
- build_examples_cmake_esp32
- build_examples_cmake_esp32s2
- build_examples_cmake_esp32c3
- build_examples_cmake_esp32s3
ci: Fixing build stage (example-related changes)
- Added MBEDTLS_PRIVATE(...) wherever required
- Updated SHAXXX functions
- Updated esp_config according to mbedtls changes
- Tests:
- build_examples_cmake_esp32
- build_examples_cmake_esp32s2
- build_examples_cmake_esp32c3
- build_examples_cmake_esp32s3
ci: Fixing target_test stage
- Updated test SSL version to TLS_v1_2
- Tests:
- example_test_protocols 1/2
ci: Fixing build stage
- Added checks for MBEDTLS_DHM_C (disabled by default)
- Updated esp_cryptoauthlib submodule
- Updated factory partition size for legacy BLE provisioning example
- Tests:
- build_examples_cmake_esp32
- build_examples_cmake_esp32s2
- build_examples_cmake_esp32c3
- build_examples_cmake_esp32s3
Co-authored-by: Laukik Hase <laukik.hase@espressif.com>
2022-03-03 01:37:10 +05:30
Aditya Patwardhan
45122533e0
mbedtls-3 update:
...
1) Fix build issue in mbedtls
2) skip the public headers check in IDF
3)Update Kconfig Macros
4)Remove deprecated config options
5) Update the sha API according to new nomenclature
6) Update mbedtls_rsa_init usage
7) Include mbedtls/build_info.h instead of mbedtls/config.h
8) Dont include check_config.h
9) Add additional error message in esp_blufi_api.h
2022-03-03 01:37:10 +05:30
Aditya Patwardhan
0483bfbbfe
Initial Changes for updating mbedtls to v3.0
2022-03-03 01:37:09 +05:30
Laukik Hase
285790e5aa
mbedtls: Added config options for v2.28.0 upgrade
2022-01-25 10:51:27 +05:30
laokaiyao
cf049e15ed
esp8684: rename target to esp32c2
2022-01-19 11:08:57 +08:00