* Added port layer from the FreeRTOS POSIX port, added
additional port code for ESP-IDF.
* Created another hello world example using that POSIX
port in tools/test_apps.
* Removed old linux app
This commit removes the riscv_interrupts.h header is it has become redundant. The previously
exposed API has been handled as follows:
- "riscv_interrupt_enable()" and "riscv_interrupt_disable()" have been removed. These functions
were declarations only and never had any implementation.
- "riscv_global_interrupts_enable()" and "riscv_global_interrupts_disable()" renamed to
"rv_utils_intr_global_enable()" and "rv_utils_intr_global_disable()" respectively and now
placed in rv_utils.h
ESP32-C2 has a single group timer, thus it will use it for the interrupt watchdog,
which is more critical than the task watchdog. The latter is implement in
software thanks to the `esp_timer`component.
update gpio_sig at `spics_out` array in each spi_periph.c of chips later than s2
then `spi_bus_add_device` can correctly distribute gpio_signals for cs_signal
Closes https://github.com/espressif/esp-idf/issues/8876
There are multiple changes in this commit:
1. Unify the RISC-V and ULP-FSM code paths in esp32ulp_mapgen.py.
It seems that these were originally introduced because `nm` output
for the RISC-V case contained symbol sizes, while for the ULP-FSM
no symbol sizes were reported. This makes sense, because the
ULP-FSM object files are produced from assembly source, symbol
sizes have to be added manually using the .size directive.
In the case of RISC-V, the object files are built from C sources
and the sizes are automatically added by the compiler.
Now 'posix' output format is used for both RISC-V and ULP-FSM.
2. Move BASE_ADDR out of esp32ulp_mapgen.py. This now has to be passed
from CMake, which should make it easier to modify if a new chip
with a different RTC RAM base address is added.
3. Add C++ guards to the generated header file.
4. Switch from optparse to argparse for similarity with other IDF
tools.
5. Add type annotations.
This commit fixes gpio_hold_en(pin) function for ESP32, where after wakeup from deep sleep, the pin gets reset to default state and stop holding the pin level.
uart: update console docs about frequency for ESP32-C2, move frequency of clock sources out of HAL
Closes IDF-5424 and IDF-4332
See merge request espressif/esp-idf!19274
sizeof(time_t) was previously switched from 4 to 8, ROM functions that use
time_t or dependent types (such as "struct stat") are no longer called due as
they still treat sizeof(time_t) as 4 (see commit
24c20d188e).
However, there is a ROM callpath that was left out. If putchar is the first
stdio print related call, the call path will result in cantwrite() ->
__swsetup_r() -> __smakebuf_r() -> __swhatbuf_r() using the ROM "struct stat"
(where sizeof(time_t)==4).
Instead of removing all printf related ROM newlib functions (which will result
in increased binary size), this commit adds a workaround to setup the stdio
files before any print related calls occur.
This results in cantwrite() always returning false, thus the callpath described
above never being reached.
Closes https://github.com/espressif/esp-idf/issues/9269
As the tlsf implementation is a fork from https://github.com/mattconte/tlsf,
the sources are moved to a separate repository and used as a submodule in the esp-idf instead.
In this commit:
- Removing TLSF related files and using tlsf submodule instead.
- Adding components/heap/tlsf_platform.h header gathering all IDF specifics.
- The multi_heap_poisoning.c provides the declaration of the
function block_absorb_post_hook() definied weak in the TLSF repository.
- The tlsf_platform.h includes the tlsf_common.h file after the definition
of FL_INDEX_MAX_PLATFORM macro to make sure that this macro will be available
in tlsf_common.h without having to include tlaf_platform.h from IDF in the
tlsf_common.h header from the TLSF repository.
- Add missing include from tlsf_block_functions.h in the multi_heap.c file.
Change related to the changes made in TLSF repository (tlsf_block_functions.h
no longer included in tlsf.h)
Blocking read from cdcacm VFS could return less bytes than requested.
This didn’t match the behaviour of other VFS drivers, and higher level
code could misbehave.
This commit marks all functions in soc_hal.h and soc_ll.h as deprecated.
Users should use functions from esp_cpu.h instead.
Also added missing wrap funcions for esp_cpu_stall() in test_panic.c files.
Fix dependency tree so that lwip doesn't depend on any specific network
interface component.
Network interface drivers shall depend on esp_netif.
esp_netif shall depend on lwip (but not on any specific interface
driver) -- it optionally depends on vfs and esp_eth (need ethernet
header for L2/bridge mode)
GPIO_HOLD_MASK array was missing the last item
Add __Static_assert to check array sizes for all gpio_periph.c files to prevent same mistake in the future.
All gpio hal and ll functions input arguments gpio_num_t are changed to uint32_t type.
Validation of gpio num should be guaranteed from the driver layer.
feat: new find_build_apps rules with centralized manifest file
Closes IDFCI-1061, IDF-3553, IDFCI-941, IDFCI-1359, and IDFCI-1361
See merge request espressif/esp-idf!18299
When ESP32-C2 is paired with a 26 MHz XTAL, the systimer tick
frequency becomes equal to 26 / 2.5 = 10.4 MHz. Previously we always
assumed that systimer tick frequency is integer (and 1 MHz * power of
two, above that!).
This commit introduces a new LL macro, SYSTIMER_LL_TICKS_PER_US_DIV.
It should be set in such a way that:
1. SYSTIMER_LL_TICKS_PER_US / SYSTIMER_LL_TICKS_PER_US_DIV equals the
actual systimer tick frequency,
2. and SYSTIMER_LL_TICKS_PER_US is integer.
For ESP32-C2 this means that SYSTIMER_LL_TICKS_PER_US = 52 and
SYSTIMER_LL_TICKS_PER_US_DIV = 5.
This introduced two possible issues:
1. Overflow when multiplying systimer counter by 5
- Should not be an issue, since systimer counter is 52-bit, so
counter * 5 is no more than 55-bit.
2. The code needs to perform:
- divide by 5: when converting from microseconds to ticks
- divide by 52: when converting from ticks to microseconds
The latter potentially introduces a performance issue for the
esp_timer_get_time function.
The TLSP deletion callback feature is not compatible with the CONFIG_FREERTOS_ENABLE_STATIC_TASK_CLEAN_UP
option. However, the "freertos_options" unit test configuration will enable that option.
This commit disables all CONFIG_FREERTOS_ENABLE_STATIC_TASK_CLEAN_UP related features when compiling with
SMP FreeRTOS.
1) Rename srp component to esp_srp
2) Remove dependency on hkdf sha
3) Restructure protocomm component APIs to make them more flexible for allowing multiple security versions
4) esp_srp: convert API return type from int to esp_err_t
5) esp_srp: Formatting changes
6) Added mbedtls_gcm instead of aes_ctr
Co-authored-by: Laukik hase <laukik.hase@espressif.com>
This fixes the issue where multiline strings and strings with delimiters inside the nvs input csv file were incorrectly parsed, and adds back the ability to add comment lines anywhere in the CSV file.
The issue stems from the move away from the python built in csv module to manual parsing, which was made after moving away from using the csv module to parse mfg data.
This reverts back to using the csv module for parsing and writing csv data in both mfg_gen and nvs_partition_gen, fixes the original issue in mfg_gen and improves code quality which makes the code more readable and maintainable.
Closes https://github.com/espressif/esp-idf/issues/7175
This commit makes changes to cpu_ll.h, cpu_hal.h, and interrupt_controller_hal.h:
- Moved to esp_hw_support in order to be deprecated in the future
- HAL/LL API now route their calls to esp_cpu.h functions instead
Also updated soc_hal.h as follows:
- Removed __SOC_HAL_..._OTHER_CORES() macros as they dependend on cpu_hal.h
- Made soc_hal.h and soc_ll.h interfaces always inline, and removed soc_hal.c.
This commit also updates the XCHAL_ERRATUM_572 workaround by
- Removing it's HAL function and invoking the workaround it directly the bootloader
- Added missing workaround for the ESP32-S3
This commit updates the esp_cpu.h API. The new API presents a new
abstraction of the CPU where CPU presents the following interfaces:
- CPU Control (to stall/unstall/reset the CPU)
- CPU Registers (to read registers commonly used in SW such as SP, PC)
- CPU Interrupts (to inquire/allocate/control the CPUs 32 interrupts)
- Memory Port (to configure the CPU's memory bus for memory protection)
- Debugging (to configure/control the CPU's debugging port)
Note: Also added FORCE_INLINE_ATTR to the DoxyFile in order to pass doc
builds for esp_cpu.h
