alex/esp-idf
alex/esp-idf
1
0
Fork 0
mirror of https://github.com/espressif/esp-idf.git synced 2024-10-05 20:47:46 -04:00
Code Issues Actions 2 Packages Projects Releases Wiki Activity
31,822 Commits 20 Branches 148 Tags 384 MiB
90c029494f
Commit Graph

1289 Commits

Author SHA1 Message Date
Tomas Rezucha
58606027da
feat(usb/host): Calculate FIFO sizes based on USB configuration 2024-02-28 16:09:53 +08:00
Darian Leung
d837836f84
refactor(hal/usb): Rename usb_fsls_phy API to match header/source names 
Note: Also fixed some formatting issues in usb_wrap_struct.h
 2024-02-28 16:09:52 +08:00
Darian Leung
148cc6e75d
refactor(hal/usb): Rename usb_phy files to usb_fsls_phy 
This commit renames USB PHY related HAL files from "usb_phy_xxx" to
"usb_fsls_phy_xxx" since they are only designed to support Full-Speed/Low-Speed
Serial USB PHYs. This renmaing is done to accommodate future USB PHYs that use
other PHY interfaces (e.g., UTMI, ULPI etc).
 2024-02-28 16:09:52 +08:00
Darian Leung
f524a59875
refactor(hal/usb): Remove usage of old USB OTG config macros 2024-02-28 16:09:51 +08:00
Darian Leung
b32a735bb0
refactor(soc/host): Update USB OTG struct fields 
This commit updates the "*_struct.h" files for the USB OTG peripheral:

- Added/removed some missing/non-existing register fields
- Added "reserved" place holders for registers that are missing due to IP
configuration.
- Added "usb_dwc_cfg.h" listing the USB OTG IP configuration for each target.
- Updated LL/HAL according to register field updates. Also tidied up the include
directives in those headers.
 2024-02-28 16:09:51 +08:00
Darian Leung
177eb9f6c6
refactor(hal/usb): Fix USB OTG compilation dependency 
Update "hal/CMakeLists.txt" so that USB OTG related HAL files depend on
the "SOC_USB_OTG_SUPPORTED" capability.
 2024-02-28 16:09:51 +08:00
Tomas Rezucha
d26320d8a1
fix(usb/host): Correctly parse bInterval field in HighSpeed EP descriptors 
For LS and FS interrupt endpoint: interval = bInterval
For isochronous and HS interrupt endpoint: interval = 2^(bInterval-1)
 2024-02-28 16:09:50 +08:00
morris
bbb7c4c756 Merge branch 'feature/usb_hs_support_v5.1' into 'release/v5.1' 
feat(usb/host): Add High Speed enumeration types (backport v5.1)

See merge request espressif/esp-idf!28059
 2024-02-28 11:46:17 +08:00
morris
c48ddea0f6 Merge branch 'contrib/github_pr_13020_v5.1' into 'release/v5.1' 
fix (esp_lcd): Don't assume panels are 16bit in VSYNC restart logic (GitHub PR) (v5.1)

See merge request espressif/esp-idf!28812
 2024-02-28 11:40:46 +08:00
Jiang Jiang Jian
76152c80a2 Merge branch 'c6_auto_dbias_master_hsq_v5.1' into 'release/v5.1' 
ESP32C6: Active & sleep dbg and dbias get from efuse to fix the voltage (v5.1)

See merge request espressif/esp-idf!28722
 2024-02-28 10:49:13 +08:00
hongshuqing
80378b809e feat(pmu): set fix voltage to different mode for esp32c6 2024-02-22 15:01:14 +08:00
morris
4ae845cd3e fix(rgb_lcd): relax the check for the data line GPIO 
There are a bunch of cases you might want some pins not exposed.

Eg.

  * Reading say 8 bit data and outputting the top 5 bits, discarding the rest by not mapping those data pins to output pins

 * Not using hsync/vsync because sync data is embedded within the data bits for more timing flexibility (eg. interlacing).

 * Using the LCD module as a high speed parallel data output bus, with no need for sync/control pins.

Removing this validation makes these cases work.

Merges https://github.com/espressif/esp-idf/pull/13103
 2024-02-06 10:35:11 +08:00
zwx
1cc34e69d7 fix(802154): fix pending tx will be delayed issue 2024-02-01 14:16:00 +08:00
Michael (XIAO Xufeng)
7f39afb373 Merge branch 'h2_auto_dbias_master_hsq_v5.1' into 'release/v5.1' 
ESP32H2: Active & sleep dbias get from efuse to fix the voltage (v5.1)

See merge request espressif/esp-idf!28715
 2024-01-29 11:21:06 +08:00
hongshuqing
9f5cd217a0 feat(pmu): set fix voltage to different mode for esp32h2 
h2 remove include
 2024-01-26 11:39:16 +08:00
zwx
2f988d08de feat(802.15.4): introduce pending tx while rx feature 2024-01-25 14:14:51 +08:00
Lou Tianhao
1e43abfb57 change(pm): put pmu_hal to iram 2024-01-16 14:01:22 +08:00
Lou Tianhao
2ecbfecedf feat(pm): support PMU trigger regdma when PU TOP 2024-01-16 14:01:22 +08:00
xiaqilin
a9679450b2 fix(ieee802154): fix the issue of not receiving packets when RSSI is positive in esp32h2 2024-01-04 15:09:42 +08:00
Jiang Jiang Jian
6e57f35873 Merge branch 'backport/add_dynamic_iram_check_for_ot_sleep_v51' into 'release/v5.1' 
fix(pm): fix extra retention function to iram(Backportv5.1)

See merge request espressif/esp-idf!28134
 2023-12-29 12:26:04 +08:00
wuzhenghui
53afab3850
feat(ulp): add api to get lp_cpu wakeup cause and clear wakeup source at startup 
Closes https://github.com/espressif/esp-idf/issues/12651
 2023-12-28 13:31:55 +08:00
zwx
81123259ff fix(pm): fix extra retention function to iram 
* Also remove unused function on H2
 2023-12-26 19:20:44 +08:00
Tomas Rezucha
cb4e90ca6e refactor(usb/host): Move FIFO size configuration to HAL layer 
The logic of calculating FIFO sizes is DWC OTG specific.
We move it to the HAL layer to provide better abstraction in the HDC layer.
 2023-12-21 10:45:21 +01:00
Tomas Rezucha
325205faee refactor(usb/host): Make private hal types USB_DWC specific 2023-12-21 10:45:04 +01:00
Tomas Rezucha
d9223c6d91 feat(usb/host): Add High Speed enumeration types 2023-12-21 10:35:31 +01:00
Xu Si Yu
866bc77246 feat(ieee802154): add tx/rx report for IEEE802.15.4 debug 2023-12-21 15:17:54 +08:00
Jiang Jiang Jian
487adc09f4 Merge branch 'change/change_regdma_power_issue_macro_v5.1' into 'release/v5.1' 
change(pm): change macro SOC_PM_RETENTION_HAS_REGDMA_POWER_BUG (backport v5.1)

See merge request espressif/esp-idf!27991
 2023-12-21 11:27:10 +08:00
Lou Tianhao
1419db4b91 change(pm): change macro SOC_PM_RETENTION_HAS_REGDMA_POWER_BUG 2023-12-19 11:44:23 +08:00
Cao Sen Miao
dfff867379 fix(tempertuer_sensor): Fix regs on temperature sensor is not volatile due to GCC bug 2023-12-15 16:41:16 +08:00
morris
1b78d57496 Merge branch 'bugfix/bod_reset_c6_h2_v5.1' into 'release/v5.1' 
fix(bod): Reset brownout in configuration to avoid RF cannot be enabled again(backport v5.1)

See merge request espressif/esp-idf!27723
 2023-12-14 11:05:55 +08:00
wuzhenghui
4a7d9dd387
fix(esp_hw_support): re-initialize icg map in modem_clock_module_enable 2023-12-08 14:22:36 +08:00
morris
5e29bd5370 Merge branch 'bugfix/fix_adc_continuous_do_not_rst_apb_clk_v5.1' into 'release/v5.1' 
fix(adc): fix adc continuous get less results beacuse do not reset apb clk (v5.1)

See merge request espressif/esp-idf!27604
 2023-12-07 21:27:05 +08:00
Lou Tianhao
c1782faf0f fix(pm/ext1): fix c6 h2 lp_aon_ll_ext1_set_wakeup_pins func 2023-12-07 03:52:22 +00:00
Cao Sen Miao
9dd90e2d9b fix(bod): Reset brownout in configuration to avoid RF cannot be enabled again 2023-12-07 10:33:58 +08:00
gaoxu
57a5c4684c fix(adc): fix adc continuous get less results beacuse do not reset apb clk 2023-12-06 10:19:45 +00:00
Darian Leung
fdab2d0c32 refactor(hal/usb_dwc): Add DWC OTG configuration values 
This commit adds a subset of the DWC OTG configuration values to the
'usb_dwc_ll.h' file. Only relevant configuration values have been added.

Some DWC OTG releated constants have also been moved from 'usb_dwc_hal.h'
to 'usb_dwc_ll.h' and renamed.
 2023-11-28 22:00:54 +01:00
Jiang Jiang Jian
b09e1d860d Merge branch 'bugfix/fix_psram_access_faild_after_pd_cpu_wakeup_v5.1' into 'release/v5.1' 
fix(esp_pm): fix psram access failed after pd_cpu wakeup if uart driver driven console is used (backport v5.1)

See merge request espressif/esp-idf!27051
 2023-11-22 17:44:32 +08:00
Shu Chen
ecbbd3c3d9 Merge branch 'backport/add_ot_radio_stats_enable_config_5_1' into 'release/v5.1' 
feat(openthread): backport some openthread features(BackportV5.1)

See merge request espressif/esp-idf!26885
 2023-11-22 12:23:53 +08:00
Aditya Patwardhan
514cd783a3 Merge branch 'bugfix/esp32h2_ecdsa_hardware_k_v5.1' into 'release/v5.1' 
fix(esp32h2): program use_hardware_k efuse bit for ECDSA key purpose (v5.1)

See merge request espressif/esp-idf!27271
 2023-11-21 13:57:38 +08:00
morris
64e7343e40 Merge branch 'bugfix/fix_adc_read_zero_h2_v5.1' into 'release/v5.1' 
ADC: fix adc raw data get 0 because of signal delay on ESP32H2(v5.1)

See merge request espressif/esp-idf!26976
 2023-11-21 11:08:57 +08:00
Jiang Jiang Jian
e718b603e4 Merge branch 'bugfix/clear_ulp_wake_intr_in_wake_source_enable_v5.1' into 'release/v5.1' 
fix(esp_hw_support): clear all type ULP wakeup intr status at ulp wakeup source enable (backport v5.1)

See merge request espressif/esp-idf!27188
 2023-11-21 10:52:54 +08:00
Jiang Jiang Jian
0e1ec38785 Merge branch 'bugfix/fix_lightsleep_current_leakage_on_usj_pad_v5.1' into 'release/v5.1' 
fix(esp_hw_support): fix lightsleep current leakage on usb pad (backport v5.1)

See merge request espressif/esp-idf!27205
 2023-11-21 10:51:11 +08:00
Mahavir Jain
2cd1635b86
fix(ecdsa): remove unused k_mode from the ECDSA HAL/LL API 
For ESP32-H2 case, the hardware k mode is always enforced through
efuse settings (done in startup code).

For ESP32-P4 case, the software k mode is not supported in the peripheral
itself and code was redundant.
 2023-11-20 16:05:15 +05:30
morris
1b3713f7cd Merge branch 'feature/support_adc_calibration_on_h2_v5.1' into 'release/v5.1' 
adc_cali: supported adc calibration v1 on ESP32H2 (v5.1)

See merge request espressif/esp-idf!26963
 2023-11-17 16:41:00 +08:00
morris
ddb6d22468 Merge branch 'feature/gpio_dump_io_info_v5.1' into 'release/v5.1' 
feat(gpio): add a dump API to dump IO configurations (v5.1)

See merge request espressif/esp-idf!26870
 2023-11-17 16:30:22 +08:00
morris
ceb0aec0cc Merge branch 'bugfix/rmt_stop_issue_v5.1' into 'release/v5.1' 
fix(rmt): a disabled channel may pick up a pending transaction (v5.1)

See merge request espressif/esp-idf!26779
 2023-11-17 16:27:21 +08:00
gaoxu
1179d9859f fix(adc): fix h2 adc oneshot read zero and add delay after getting done signal v5.1 2023-11-17 02:16:21 +00:00
wuzhenghui
6ae596c764
fix(esp_hw_support): fix lightsleep current leakage on usb-phy controlled pad 2023-11-16 20:03:30 +08:00
wuzhenghui
61bb3fb67f fix(esp_hw_support): clear all type ULP wakeup intr status at ulp wakeup source enable 2023-11-16 11:49:40 +08:00
wuzhenghui
46dae91a39 fix(esp_pm): fix psram access faild after pd_cpu wakeup 2023-11-16 03:20:27 +00:00