ESP32 in revision0 and revision1 uses touchpad to provide
current to oscillate xtal 32k. But revision2 and revision3
do not need to do that.
Note: touchpad can not work and toupad/ULP wakeup sources
are not available when toupad provides current to xtal 32k
* Target components pull in xtensa component directly
* Use CPU HAL where applicable
* Remove unnecessary xtensa headers
* Compilation changes necessary to support non-xtensa gcc types (ie int32_t/uint32_t is no
longer signed/unsigned int).
Changes come from internal branch commit a6723fc
During HAL layer refactoring and new chip bringup, we have several
caps.h for each part, to reduce the conflicts to minimum. But this is
The capabilities headers will be relataive stable once completely
written (maybe after the featues are supported by drivers).
Now ESP32 and ESP32-S2 drivers are relative stable, making it a good
time to combine all these caps.h into one soc_caps.h
This cleanup also move HAL config and pin config into separated files,
to make the responsibilities of these headers more clear. This is
helpful for the stabilities of soc_caps.h because we want to make it
public some day.
freertos: replace the freertos regular malloc to the specific malloc from xtensa port for tcb and stack allocations
freertos: avoid the cpu1 to unwind pended ticks when xTaskResumeAll is called insed of an ISR
freertos: protected the xPortGetCoreID functions with missing critical sections
tests: re-eanble the ignored tests that was failling before race-condition fixes
Fix for issues where RTC FAST memory is updated as part of going into deep
sleep. Very high risk if heaps are in RTC memory - in particular task stacks
may be in RTC memory, but also other variables.
Also fixes potential concurrency problems as RTC FAST memory is not accessible
by CPU during the CRC calculation itself.
Method:
- Disable interrupts (currently for single core only, will need update for S3)
- Load all registers before calculating CRC or going to sleep
esp_system: removed repeated interrupt allocator code and moved common code to esp_system
xtens: moved xtensa specific code from freertos to the xtensa component
hal/interrupt_controller: added interrupt controller hal and ll files
docs: update the doxyfile with new location of esp_itr_alloc.h file
xtensa: fixed dangerous relocation problem after moving xtensa interrupt files out of freertos
docs: removed Xtensa reference from intr_allocator api-reference
xtensa: pushed the interrupt function that manages non iram interrupts to the xtensa layer
esp_system/test: fixed platform dependent setting for intr_allocator tests
hal: rename the functions used to manage non iram interrupt mask.
Commit aa43ed8 was fixing the light sleep overhead calculation for
ESP32-S2. However it also changed the overhead values for ESP32,
resulting in incorrect light sleep time. This caused regression in
light sleep example test.
Revert the original values for the ESP32, keep different set of values
for each chip.
Spinlocks from spinlock.h do not disable the scheduler and thus cannot safely
be directly used as a locking mechanism. A task holding the lock can get
pre-empted, and at that point the new running task will also be allowed to
take the spinlock and access whatever it was protecting.
Another issue is that the task holding a spinlock could migrate to a different
core which in turn would cause the application to fail asserts. The current
implementation assumes the core that takes the lock is also the core that
releases it.
Closes https://github.com/espressif/esp-idf/issues/5762
Sometimes the flash size read from bootloader is not correct. This may
forbid SPI Flash driver from reading the the area larger than the size
in bootloader header.
When the new config option is enabled, the latest configured
ESPTOOLPY_FLAHSIZE in the app header will be used to override the value
read from bootloader header.
Based on the original code (`esp32/sleep_modes.c`), `RTC_SLEEP_PD_XTAL`
is always given as an argument to `esp_sleep_start`. Enforce this in
function to get power down flags to avoid redundancy.
- Introduce system time function and concept of system time provider.
esp_timer is system time provider when present.
- Set the reference point for system time, g_startup_time.
- Use the system time functions in newlib instead of calling esp_timer
functions directly
InstrFetchProhibited usually occurs because of a jump to an invalid
pointer. In this case, PC in the exception frame is the address of
the jump destination. 'esp_ptr_executable' check in print_backtrace
function recognizes the first frame as invalid, and the backtrace is
interrupted. This prevents the user from finding the location where
the invalid pointer is dereferenced.
Bypass the 'esp_ptr_executable' check if the exception cause is
InstrFetchProhibited. Update the test case to no longer ignore this
issue.
Restores the change of startup refactor changes removed the no stack
check protection flag when compiling the source file that contains
execution of constructors - which contains function to setup stack
guard. Restore that and update the source file, since this is in the 2nd
stage of the startup now.
Closes https://github.com/espressif/esp-idf/issues/5617
This commit adds TWAI driver support for the
ESP32-S2. The following features were added:
- Expanded BRP support
- Expanded CLKOUT Divider Support
- Updated example READMEs
