This prevents the compiler error for the implicit declaration of
function "esp_rom_printf".
Signed-off-by: Gustavo Henrique Nihei <gustavo.nihei@espressif.com>
Added the following new APIs to the esp_timer module:
- esp_timer_get_period(): Returns the period of a timer in microseconds.
- esp_timer_get_expiry_time(): Returns the timeout value of a one-shot timer in microseconds.
Signed-off-by: Sudeep Mohanty <sudeep.mohanty@espressif.com>
In some cases, sending the shutdown signal may fail, which causes `httpd_stop` to wait indefinitely.
This PR adds a check to prevent this infinite loop.
Signed-off-by: Shubham Kulkarni <shubham.kulkarni@espressif.com>
Closes https://github.com/espressif/esp-idf/pull/7843
As ESP32C3 does not have support for REF_TICK source clock, it is now not
possible to select it anymore.
Auto cfg clock has been improved for all boards.
This function resets the spinlock given as a parameter after taking it
(when entering the critical section). This then results in a panic once
it tries to exit the same critical section.
* Closes https://github.com/espressif/esp-idf/issues/7725
peripheral enable/disable usually should be managed by driver itself,
so make it as espressif private APIs, not recommended for user to use it
in application code.
However, if user want to re-write the driver or ports to other platform,
this is still possible by including the header in this way:
"esp_private/peripheral_ctrl.h"
* Migrate test cases from IDF test runner to Unity fixture.
* Tighten heap checks in the test case a bit.
* Run formatting script on test_wl.c
* NEW: Define 4 test configurations, including configs with 512 byte
sector size. Previously these configs weren't tested in CI.
* NEW: The test app only runs for ESP32 and ESP32-C3 (one chip for
each architecture). The component is pretty high level so we don't
need to test it for each chip. This reduces the load on CI.
Using these ciphers can constitute a security risk if the server
uses a weak prime for the key exchange.
Footprint impact:
Roughly 3K saved in text+rodata in default https_request example
This commit fixes issue where empty (unprogrammed) digest slot out of
multiple supported (e.g. 3 for ESP32-C3) could cause issue in
workflow enablement process.
Notes:
1. This issue was applicable for chips supporting "secure-boot-v2"
scheme with multiple digests slots
2. This issue was affecting only manual workflow, where digest of
public was pre-flashed in efuse
3. Change in "flash_encrypt.c" is only for additional safety purpose
This commit updates the USB Host Library API in the following wasy:
- usb_host_client_handle_t and usb_device_handle_t made into struct pointers
to generate compiler warnings about conflicting handle types
- usb_host_client_config_t changed to future proof API for Synchronous Clients
- Added usb_host_lib_unblock()
- Added usb_host_device_addr_list_fill()
- Return of usb_host_device_free_all() updated to indicate whether there
are still devices yet to be freed.
- Blockg APIs are now marked explicitly
- Fixed a bug in usb_host_transfer_submit_control() when checking the bEndpointAddress
of a control transfer.
Tests are also refactored to move some common macros into shared headers
Closes https://github.com/espressif/esp-idf/issues/7786
This commit fixes how the USBH handling of a sudden device disconnection,
more specifically handling of device gone.
- Previously the USBH would only halt, flush, and dequeue the device's
default EP, then send a device gone event to the Host Library layer.
- Now the USBH will also halt and flush all non-default EPs, allowing
all of the URBs to be dequeud.
- Some internal object members are now protected by a mutex instead of
a spinlock.
Closes https://github.com/espressif/esp-idf/issues/7505
This commit fixes how the USB Host HCD handles sudden disconnections.
Bugs:
- HW channels remain active when the port suddenly disconnects, and
previously the channel would be disabled by setting the disabled bit,
then waiting for a disabled interrupt. However, ISOC channels do not
generate the disabled interrupt when the port is invalid, thus leading
to tasks getting indefinitely blocked in hcd_pipe_command().
Fix:
On a sudden disconnection, forcibly treat all channels as halted even
if their HCCHAR.ChEna bit is still set. We do a soft reset after a port
error anyways, so the channels will eventually be reset.
Closes https://github.com/espressif/esp-idf/issues/7505
This commit addes the 8/16 bit register field access workarounds to
the DWC_OTG peripheral. This workaround was applied to all other
peripherals in commit 874a720286.
The previous SMP freertos round robin would skip over tasks when
time slicing. This commit implements a Best Effort Round Robin
where selected tasks are put to the back of the list, thus
makes the time slicing more fair.
- Documentation has been updated accordingly.
- Tidy up vTaskSwitchContext() to match v10.4.3 more
- Increased esp_ipc task stack size to avoid overflow
Closes https://github.com/espressif/esp-idf/issues/7256
Increase reset assertion time from 100µs (as specified minimum in the datasheet) to 150µs.
Some specimen of the LAN8720 need the reset signal asserted longer than 100µs to initialise properly. Otherwise they are in a zombie state where they are establishing and loosing an Ethernet link once in a seconds interval.
During the early start, the virtual eFuse mode can call erase operations when OS is not yet running.
Possible workaround: CONFIG_SPI_FLASH_YIELD_DURING_ERASE=n
Fixed for the legacy flash driver as well.
usb_serial_jtag: Add secondary menu to support using usb_serial port to print when primary is uart
Closes IDF-3525 and IDF-3555
See merge request espressif/esp-idf!14554
FATFS provides a disk status and disk initialize callback which were not
implemented. Implementation has very low impact on SD/MMC speed and
fixes issues, when trying to open file when SD card was removed from
slot and not deinited.
If disk_status returns STA_NOINIT, it will always continue with
disk_initialize. If that returns 0, it will continue like everything is
working normally. So there has to be the same check as in disk_status.
Return of disk_initialize is always checked like this for STA_NOINIT or
STA_PROTECT so if command fails, we return the STA_NOINIT.
stat = disk_initialize(pdrv);
if (stat & STA_NOINIT) return FR_NOT_READY;
if (stat & STA_PROTECT) return FR_WRITE_PROTECTED;
Closes IDF-4125
esp_restart()/panic_restart() never resets the Digital system (so far required only by the Memprot feature) as there's a typo in the corresponding #define:
it checks CONFIG_ESP_SYSTEM_CONFIG_MEMPROT_FEATURE instead of CONFIG_ESP_SYSTEM_MEMPROT_FEATURE.
Issue fixed.
IDF-4094
The following changes have been made:
1. All FreeRTOS kernel source files are now placed in the
freertos/FreeRTOS-Kernel folder to match with the upstream folder structure.
2. All kernel include files are now placed in freertos/FreeRTOS-Kernel/include.
3. All port files are now placed in freertos/FreeRTOS-Kernel/portable.
4. All additions/customizations are placed in freertos/esp_additions.
5. All other miscellaneous files (README, License files etc.) are moved to
freertos/FreeRTOS-Kernel folder to match with the upstream.
6. Updated esp-cryptoauthlib to latest commit to resolve FreeRTOS
include dependencies.
Signed-off-by: Sudeep Mohanty <sudeep.mohanty@espressif.com>
ringbuf: Fix bug where comparision between a signed and unsigned operand resulted in incorrect free size for no-split/allow-split buffers
Closes IDFGH-5624 and IDFGH-5649
See merge request espressif/esp-idf!15373
Doc/Make Classic BT related document links only visible for ESP32
Closes IDFGH-5008, IDFGH-6022, and AUD-3378
See merge request espressif/esp-idf!15635
The issue is related to the non-sequential way of description when
such fields going together sequential.
Related to esp32h2 chip for eFuses: MAC_FACTORY and MAC_EXT.
The issue is in wrong indexes of MAC_EXT.
MAC_EXT got indexes like it is joined to MAC_FACTORY.
const esp_efuse_desc_t* ESP_EFUSE_MAC_FACTORY[] = {
&MAC_FACTORY[0],
&MAC_FACTORY[1],
&MAC_FACTORY[2],
&MAC_FACTORY[3],
&MAC_FACTORY[4],
&MAC_FACTORY[5],
NULL
};
const esp_efuse_desc_t* ESP_EFUSE_MAC_EXT[] = {
&MAC_EXT[6],
&MAC_EXT[7],
NULL
};
This commit fixed it to:
const esp_efuse_desc_t* ESP_EFUSE_MAC_EXT[] = {
&MAC_EXT[0],
&MAC_EXT[1],
NULL
};
This commit fixes a bug in no-split and allow-split ring buffers free buffer size calculation.
When the free size available in the buffers less than the size of one item header,
the function prvGetCurMaxSizeNoSplit/AllowSplit() incorrectly returned the maxItemSize instead of 0.
This is due to the comparision between a negative and a positive value
where both operands are treated as unsigned during the comparision operation,
thereby treating the negative operand as a large integer.
Also added new unit tests to test buffer-full and almost-full conditions
where this scenario is likely to be hit.
Closes https://github.com/espressif/esp-idf/issues/7344
Closes https://github.com/espressif/esp-idf/pull/7371
The release of the semaphore indicating the item was successfully sent must be the last semaphore released. The receiver may be in another task and may delete the Ringbuffer (such as with a return code across tasks design pattern) if they are through with the Ringbuffer.
The function xRingbufferSendAcquire followed by xRingbufferSendComplete had the semaphores released in the proper order and that same pattern should have been used in xRingbufferSend and xRingbufferSendFromISR. This commit fixes this order.
Issue (IDFGH-6030) #7716 describes the problem in more detail.
Closes IDFGH-6030, https://github.com/espressif/esp-idf/issues/7716
Closes IDFGH-6036, https://github.com/espressif/esp-idf/pull/7721
0 is a valid socket description, so should be accepted after we create a
socket. In IDF, though, it's just a theoretical issue, as customers have
to configure:
* FD_SETSIZE = CONFIG_LWIP_MAX_SOCKETS (from makefiles)
* CONFIG_VFS_SUPPORT_IO = n (from menuconfig)
(this configuration is currently broken, but if we adjust the IDF here
and there we could reproduce the issue)
In 4972605, high-level interrupt handler hook was renamed from
ld_include_highint_hdl to ld_include_panic_highint_hdl. However the
change wasn't applied in GNU Make based build system. As a result,
the default interrupt handler was linked and features which depended
on the high-level interrupt didn't work.
Closes https://github.com/espressif/esp-idf/issues/7759
Closes https://github.com/espressif/esp-idf/issues/7447
This commit removes the following critical nested macros as follows:
- portENTER_CRITICAL_NESTED()
- portEXIT_CRITICAL_NESTED()
They are replaced with portSET_INTERRUPT_MASK_FROM_ISR() and
portCLEAR_INTERRUPT_MASK_FROM_ISR() which are the proper FreeRTOS interfaces.
Created a portmacro_deprecated.h for each port to contain deprecated API
that were originally from portmacro.h
This commit adds the following hook functions to obtain memory
for the IDLE and Timer Daemon tasks when configSUPPORT_STATIC_ALLOCATION
is enabled:
- vApplicationGetIdleTaskMemory()
- vApplicationGetTimerTaskMemory()
Currently, both functions simply allocate from the same memory as
regular tasks (i.e., internal memory for both the stack and TCB)
Closes https://github.com/espressif/esp-idf/issues/7511
