Commit Graph

66 Commits

Author SHA1 Message Date
Sudeep Mohanty
e22b4007d3 esp_hw_support: Removed deprecated CPU util functions
The following files were deleted:
- components/esp_hw_support/include/soc/cpu.h
- components/soc/esp32s3/include/soc/cpu.h

The following functions are deprecated:
- get_sp()

The following functions declared in soc/cpu.h are now moved to esp_cpu.h:
- esp_cpu_configure_region_protection()

The following functions declared in soc/cpu.h are now moved to components/xtensa/include/esp_cpu_utils.h:
- esp_cpu_process_stack_pc()

All files with soc/cpu.h inclusion are updated to include esp_cpu.h instead.

Signed-off-by: Sudeep Mohanty <sudeep.mohanty@espressif.com>
2021-12-28 16:58:37 +05:30
Ivan Grokhotkov
6a37b41df8 memprot: fix debug mode check
Regression from dd938eb9, the fault injection check was always failing
in debug mode.
2021-12-23 16:39:12 +01:00
Martin Vychodil
dd938eb952 System/Security: Memprot API unified (ESP32C3)
Unified Memory protection API for all PMS-aware chips (ESP32C3)

Closes JIRA IDF-3849
2021-12-21 01:50:36 +01:00
Cao Sen Miao
463cf2cf1c ESP8684: Clean up ESP8684 code, remove useless code, update headers 2021-12-09 18:36:39 +08:00
Simon
6f9b89f619 Merge branch 'bugfix/usb_no_rom_log' into 'master'
USB_SERIAL_JTAG: Fix the issue that there is no rom/bootloader log when restarting

Closes IDF-4173

See merge request espressif/esp-idf!16057
2021-12-07 08:16:10 +00:00
Cao Sen Miao
17ea9d7faf USB_SERIAL_JTAG: Fix the issue that there is no rom log when restarting 2021-11-29 20:26:09 +08:00
jingli
0ea1825f64 reduce bootup time when using usb-serial-jtag 2021-11-29 17:21:11 +08:00
morris
16677b0d3c global: make periph enable/disable APIs private
peripheral enable/disable usually should be managed by driver itself,
so make it as espressif private APIs, not recommended for user to use it
in application code.
However, if user want to re-write the driver or ports to other platform,
this is still possible by including the header in this way:
"esp_private/peripheral_ctrl.h"
2021-11-08 10:37:47 +08:00
wuzhenghui
5000aa877f fix rtc_clk_cal: Wait for timeout in a loop instead of just judge once 2021-10-19 12:07:34 +08:00
wuzhenghui
ab9df9945f fix stuck in rtc_clk_cal 2021-10-14 16:25:54 +08:00
Li Shuai
73829221f5 esp_hw_support: force power down wifi and bt power domain when rtc module init 2021-10-14 10:51:10 +08:00
Martin Vychodil
5344de34c3 System/Memprot: fixed voltage glitching detection logic
When the application is being debugged it should check the call result (esp_cpu_in_ocd_debug_mode())
is not given volt.glitch attack - so the result is triple-checked by ESP_FAULT_ASSERT macro. In case
the check fails, the system is reset immediately

IDF-4014
2021-10-04 09:21:07 +02:00
Jiang Jiang Jian
f5ae8b0533 Merge branch 'feature/ledc_use_rtc8m_or_xtal_lightsleep' into 'master'
support RTC8M and XTAL power domain in light sleep mode

Closes IDF-3419

See merge request espressif/esp-idf!15152
2021-09-27 04:02:29 +00:00
Wu Zheng Hui
1080e4f6a2 rename APB_CTRL ro SYS_CON
save
2021-09-16 20:57:57 +08:00
Li Shuai
b3e27403f3 esp_hw_support: keep external 40 MHz xtal related analog circuit power on during sleep 2021-09-16 14:46:21 +08:00
Li Shuai
58292a7d22 Power Management: add XTAL power domain to control whether external 40MHz xtal is powered down during sleep 2021-09-16 14:43:43 +08:00
Li Shuai
f5b39a7cde esp_hw_support: No voltage drop during light sleep to ensure stable output clock of rtc8m oscillator 2021-09-16 14:40:46 +08:00
Li Shuai
e44ead5356 Power Management: add RTC8M power domain to control whether internal 8m oscillator is powered down during sleep 2021-09-13 17:36:54 +08:00
Sachin Parekh
fa2707f1f3 hmac: Added Downstream JTAG enable mode for esp32c3 and esp32s3
If JTAG is disabled temporarily by burning SOFT_DIS_JTAG, it can be
re-enabled temporarily through esp_hmac_jtag_enable API
2021-09-06 11:06:50 +05:30
Marius Vikhammer
4869b3cd4a WDT: Add support for XTAL32K Watchdog timer 2021-09-02 09:09:00 +08:00
morris
a861575d05 Merge branch 'bugfix/fix_esp32c3_auto_adjust_volt' into 'master'
system: fix esp32c3 auto adjust voltage bug

See merge request espressif/esp-idf!14725
2021-08-26 02:53:22 +00:00
sly
b342b49823 fix esp32c3 auto adjust voltage bug 2021-08-25 17:08:26 +08:00
Jan Brudný
7f50818a99 esp_hw_support: update copyright notice 3 2021-08-10 13:30:57 +02:00
Renz Bagaporo
452bfda367 esp32: move dport_access 2021-07-16 20:14:26 +08:00
Renz Bagaporo
702e41e1c8 esp32s2: move crypto related functions 2021-07-16 20:14:26 +08:00
Renz Bagaporo
ea2aafbb7a esp32s2: move memprot api 2021-07-16 20:14:26 +08:00
Jiang Jiang Jian
d28417edbc Merge branch 'bugfix/deep_sleep_rtcwdt_rst_issue' into 'master'
clear wakeup and reject int raw signal before entry sleep

Closes FCS-673

See merge request espressif/esp-idf!13982
2021-06-29 13:31:40 +00:00
Li Shuai
6ca207531b deep sleep: clear wakeup and reject int raw signal before entry sleep 2021-06-29 11:59:54 +08:00
Marius Vikhammer
ee2f8b1a62 build system: always build with -fno-jump-tables & -fno-tree-switch-conversion
Jump tables placed in flash would cause issue with code that needed to be ran from IRAM.

These optimizations are now always disabled.
2021-06-24 14:54:10 +08:00
Omar Chebib
dd8843fec3 regi2c: add a spinlock for accessing (reg)I2C devices
When not compiling bootloader, a spinlock will be used for reading or writing
I2C internal devices/registers.
When compiling for bootloader, no need to use any lock.
2021-05-13 11:55:41 +08:00
Jiang Jiang Jian
3c30e688c4 Merge branch 'feature/support_auto_adjust_voltage_storingInEfuse_openGlitchRst' into 'master'
ESP32C3: auto adjust voltage dbias storing in efuse and open glitch reset for ECO3

See merge request espressif/esp-idf!13395
2021-05-13 03:49:59 +00:00
chaijie
eea76d14bb ESP32C3: auto adjust voltage dbias storing in efuse and open glitch reset for ECO3
1. add some efuse api to get rtc & digital voltage
2. set dig_rtc voltage to a fix value storing in efuse no mater which cpu frequency
3. modify hardware code in bootloader to fit all c3 ECO3 version
2021-05-08 17:56:54 +08:00
Li Shuai
344ec80fad optimize deep sleep current in wifi softap mode 2021-04-28 14:03:02 +00:00
Angus Gratton
7cb83c8787 system doc: Re-structure description of MAC addresses, especially on newer chip targets
Includes a note about calculating the Ethernet MAC on platforms with no built-in
Ethernet, and removes documentation for esp_efuse_mac_get_custom() on targets
other than ESP32
2021-04-22 16:08:55 +10:00
Angus Gratton
cef3b26a91 Merge branch 'refactor/move_from_esp_system' into 'master'
Movements from esp_system

Closes IDF-2165

See merge request espressif/esp-idf!12695
2021-04-08 10:16:08 +00:00
Angus Gratton
70cab5bd81 Merge branch 'bugfix/ulp_riscv_unintended_wake' into 'master'
ulp: unintended wakeup in ulp_riscv

See merge request espressif/esp-idf!12894
2021-04-08 01:52:41 +00:00
Renz Bagaporo
8762bfebde esp_system: move asysnc memcpy to esp_hw_support 2021-04-07 17:53:37 +08:00
Michael (XIAO Xufeng)
d21ca33e40 Merge branch 'bugfix/fix_bootloader_time_too_long_bug' into 'master'
esp32s2/esp32c3: decrease boot up and cpu start up time

See merge request espressif/esp-idf!12725
2021-04-06 06:34:57 +00:00
Angus Gratton
6b57f33858 Merge branch 'refactor/movements_from_target_components' into 'master'
Movement from target components 1

See merge request espressif/esp-idf!12482
2021-04-05 02:37:21 +00:00
chaijie
f9de69586b esp32s2/esp32s3/esp32c3: Decrease bootloader cost time 2021-04-01 06:19:34 +00:00
chaijie
c101fc3e3d fix c3 hardware bug before ECO3 and optimizate bbpll config:
1. deepsleep poweron reset bug in high temperature before ECO3;
2. brownout reset bug before ECO2;
3. bbpll voltage low bug before ECO3;
4. need xpd iph for xtal before ECO3;
2021-03-31 13:08:56 +00:00
Renz Bagaporo
9478298aa4 esp32: move mac target specific configs 2021-03-31 19:17:33 +08:00
Renz Bagaporo
4a08264e7a esp_system: split esp_system.h header 2021-03-31 19:13:03 +08:00
Renz Bagaporo
a7bac58480 esp32: move system api to esp_system 2021-03-31 19:13:03 +08:00
Renz Bagaporo
3639c2322b ulp: clear rtc int at initialization
Closes https://github.com/espressif/esp-idf/issues/6654
2021-03-31 17:15:55 +08:00
KonstantinKondrashov
aa1338bf23 wdt: Fix timeout and RTC_SLOW_CLK
RTC_SLOW_CLK
ESP32:    150kHz
ESP32-S2:  90kHz
ESP32-S3: 150kHz
ESP32-C3: 150kHz
2021-03-19 00:15:18 +08:00
Angus Gratton
70e13752ae Merge branch 'feature/rtc_time_get' into 'master'
rtc: Clean up for S2,S3,C3

Closes IDF-2569

See merge request espressif/esp-idf!12336
2021-03-05 01:16:15 +00:00
Angus Gratton
d6f4d99d93 core system: Fix warnings in compilation when assertions are disabled
Adds a CI config for hello world that sets this, to catch future regressions
2021-03-03 10:26:57 +11:00
KonstantinKondrashov
b31bf01484 rtc: Clean up for S2,S3,C3 2021-03-01 16:51:15 +08:00
Xia Xiaotian
b71481093a esp_wifi: fix some Wi-Fi scan and coexist bugs
1. Fix the bug that Wi-Fi performance is impacted by BLE starting scan for a while in some scenarios on ESP32-C3.

2. Fix the bug that Wi-Fi performance is impacted when Bluetooth change state for a while in some scenarios on ESP32-C3.

3. Fix the bug that BLE performance is impacted by Wi-Fi scan on ESP32-C3.

4. Fix the bug that Wi-Fi scan fails when BLE is scanning on ESP32-C3.

5. Fix Wi-Fi ACK and CTS rate when low rate is disabled on ESP32-C3.
2021-02-08 21:20:09 +08:00