The legacy driver is still available, but new feature won't be added.
Enable RMT_SUPPRESS_DEPRECATE_WARN if you don't want to see the
deprecated warnings.
spi_flash_get_chip_size return a size_t to printf this type it's better to use %u than %d.
We didn't use %zu because it will be ignored by "nano" printf (i.e. when
CONFIG_NEWLIB_NANO_FORMAT is on).
Closes https://github.com/espressif/esp-idf/pull/8900
check_kconfigs.py would only correctly handle "source", but not "rsource", "osource"
or "orsource".
Fixed any warnings detected after updating the test.
Add idf.py monitor argument --no-reset (-R) to prevent resetting the CPU on monitor startup
idf.py monitor: fix type signature
idf.py monitor: fix reset key shortcut when --no-reset (-R) argument is used
idf.py monitor: change --no-reset (-R) argument descriptions in help
idf.py monitor: simplify --no-reset (-R) argument checks
idf.py monitor: add warning if --no-reset is used, but --port is not given
idf.py monitor: ignore --no-reset if --port is not given
When vfs component is not added to the build, bare minimum syscalls
are provided by newlib component. These syscalls currently don't
perform CR/LF translation.
This commit makes the 'get_test_name' function work with minimal
syscalls and also adds echo, so that the user sees what they type.
'read' function should return 0 when encountering an end of file. When
newlib calls read and sees EOF returned, it assumes that this
condition is permanent and never calls 'read' for this file again
(unless the read pointer is moved using fseek).
The correct behavior in case no characters were received over UART is
to return -1. In this case newlib will retry reading from file on next
call to fread, fgetc or another function which calls __srefill_r.
lwip was added to common requirements list to provide "sys/socket.h"
header to all components without additional requirements specified.
However, lwip pulls in a lot of dependencies on other components.
This commit removes lwip from common requirements to reduce the number
of components in G1-only apps.
To compensate for this removal, the following changes are made:
- newlib (which is a common requirement) has a public dependency on
lwip if lwip is present in the build. This ensures that sys/socket.h
is available as long as lwip component is included into the build.
- lwip is now a public requirement of esp-tls since esp_tls.h includes
sys/socket.h header.
- lwip is now a public requirement o esp_http_client because
sys/socket.h is included from esp_http_client.h
- lwip is now a private requirement of esp_wifi for "smartconfig_ack"
- lwip is now a private requirement of mqtt for socket functions
- lwip is now a public requirement of tcp_transport because
esp_transport_tcp.h includes sys/socket.h header.
- mbedtls checks if lwip component is present in the build. If yes,
net_sockets.c is added to the build, along with the dependency on
lwip. Previously lwip was a public requirement of mbedtls
unconditionally.
system/g1_components test app is updated to reflect the changes
Default public dependencies of a component before and after this
change, except common requirements:
- esp_timer (public dependency of freertos)
- bootloader_support (public dependency of esp_hw_support)
- vfs (public dependency of lwip)
- esp_wifi (public dependency of lwip)
- esp_event (public dependency of esp_wifi)
- esp_netif (public dependency of esp_event)
- esp_eth (public dependency of esp_netif)
- esp_phy (public dependency of esp_wifi)
After:
- esp_timer (public dependency of freertos)
- bootloader_support (public dependency of esp_hw_support)
Altogether, the following components have been always added as
public requirements to all other components, and are not added now
([breaking-change]):
- lwip
- vfs
- esp_wifi
- esp_event
- esp_netif
- esp_eth
- esp_phy
Application components now need to explicitly declare dependencies on
these components.
spi_flash: refactor spi_flash clock configuration logic and support esp32c2
Closes IDF-4474, IDF-4025, and IDF-4066
See merge request espressif/esp-idf!16602
Some components were including esp_timer.h without declaring a
dependency on esp_timer component. This used to work due to a
transitive public dependency on esp_timer from freertos component.
Add explicit dependencies where needed.
Also some source files were using esp_timer functions without
including the header file. This used to work because esp_timer.h was
included from freertos port header file. This commit adds esp_timer.h
includes where needed.
usb_serial_jtag: make CONFIG_DEFAULT initializer match order of structure definition (GitHub PR)
Closes IDFGH-7218
See merge request espressif/esp-idf!17886
GDB now is standalone tool separated from toolchain due to frequent updates.
Added installation tests for the new tool.
Tests are changed because they were wrong, see explanation:
esp32 objdump:
40084290 <esp_crosscore_int_send_yield>:
......
/builds/espressif/esp-idf/components/esp_system/crosscore_int.c:145
4008429c: 000090 retw
With previous GDB backtrace was:
#0 0x4008429c in esp_crosscore_int_send_yield (core_id=0) at /builds/espressif/esp-idf/components/esp_system/crosscore_int.c:144
This commit fixes the backtrace with the right line number:
#0 0x4008429c in esp_crosscore_int_send_yield (core_id=0) at /builds/espressif/esp-idf/components/esp_system/crosscore_int.c:145
Other tests changes have the same cause of fixing.
Closes https://github.com/espressif/esp-idf/issues/6334
Moved the following kconfig options out of the target component:
* CONFIG_ESP*_DEFAULT_CPU_FREQ* -> esp_system
* ESP*_REV_MIN -> esp_hw_support
* ESP*_TIME_SYSCALL -> newlib
* ESP*_RTC_* -> esp_hw_support
Where applicable these target specific konfig names were merged into
a single common config, e.g;
CONFIG_ESP*_DEFAULT_CPU_FREQ -> CONFIG_ESP_DEFAULT_CPU_FREQ_MHZ
Documentation was incorrectly point that we return the socket number.
The function returns an integer related to the status of the connection.
Closes https://github.com/espressif/esp-idf/issues/8416
In c4bcf111, soc_memory_types.h header was moved from soc to
esp_hw_support. Since some of the functions are also used in
bootloader and because esp_hw_support is not part of the bootloader
build, part of the functions were moved into bootloader_support.
To make these functions available to the app, bootloader_support was
added as a public dependency of esp_hw_support.
Since esp_hw_support is in common requirements list, this has added
bootloader_support as a public requirement to every component in the
build. Adding new public requirements outside of common components
is undesirable, since components may accidentally include headers
from bootloader_support without explicitly declaring it as a
requirement.
This commit reverts this addition. Until a better solution is found,
some part of esp_memory_utils.h is duplicated into
bootloader_memory_utils.h. A CI check is added to make sure these
files stay in sync.
1. Move adding of prefix/postfix to the private key to example code.
This is to preserve forward compatibility when more curves are supported.
2. Documentation correction of bootstrapping key configuration.
1. Clean up clk usage in IDF, replace rtc_clk_xtal/apb_freq_get with
upper level API esp_clk_xtal/apb_freq
2. Fix small errors and wrong comments related to clock
3. Add clk_tree_defs.h to provide an unified clock id for each chip
Modify the NGed drivers to adopt new clock ids
Prior to this change, `spi_flash_hal_supports_direct_write` and
`spi_flash_hal_supports_direct_read` will check the buffer pointer
place, which should be done in driver layer, instead of HAL layer.
This component property allows including all component object files
into the executable. It is equivalent to wrapping the component
library with -Wl,--whole-archive and -Wl,--no-whole-archive flags.
Closes https://github.com/espressif/esp-idf/issues/8667
This commit updates the task snapshot unit tests as follows:
- Both uxTaskGetSnapshotAll() and vTaskGetSnapshot() are now both tested
- Test cases are now dependent on CONFIG_FREERTOS_ENABLE_TASK_SNAPSHOT
Eliminate UT_T1_GPIO runner requirement by routing internally through gpio matrix and by setting gpio pins to GPIO_MODE_INPUT_OUTPUT mode for all interrupt related test cases.
GDB with python support will automatically load freertos-gdb python module.
It comes to GDB with commands starting with 'freertos' to show human-readable
tables with freertos task/queue/timer information
Python module URL: https://pypi.org/project/freertos-gdb
esp-system: removed esp_phy and nvs dependencies, change app update and pm to weak dependencies
Closes IDF-4656
See merge request espressif/esp-idf!17092
A memory region starts from REGION_START and ends at
(REGION_START+SIZE-1).
Prior to this change, the check assumes a to-be-added region starting from REGION_START is invalid. Let's take an easy example:
A memory region: 0x1000~0x10ff
new added region: 0x1000~0x1020
This will be valid.
Valid conditions and invalid conditions are illustrated in the code comment
